Pass two TCGReg to tcg_out_tlb_load, rather than idx+args.
Move ldst_optimization routines just below tcg_out_tlb_load to avoid
the need for forward declarations.
Use TCGReg enum in preference to int where apprpriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Mark Wu (2) and Tomoki Sekiyama (1)
# Via Michael Roth
* mdroth/qga-pull-2013-10-10:
qemu-ga: Extend 'guest-info' command to expose flag 'success-response'
qemu-ga: Add interface to traverse the qmp command list by QmpCommand
qemu-ga: execute fsfreeze-freeze in reverse order of mounts
Message-id: 1381435782-25524-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-pull:
exec: Add both big- and little-endian memory helpers
tcg: Add qemu_ld_st_i32/64
tcg: Add TCGMemOp
configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION
tcg: Add tcg-be-ldst.h
tcg: Add tcg-be-null.h
exec: Delete is_tcg_gen_code and GETRA_EXT
tcg-aarch64: Update to helper_ret_*_mmu routines
tcg: Merge tcg_register_helper into tcg_context_init
tcg: Add tcg-runtime.c helpers to all_helpers
tcg: Put target helper data into an array.
tcg: Remove stray semi-colons from target-*/helper.h
tcg: Move helper registration into tcg_context_init
target-m68k: Rename helpers.h to helper.h
tcg: Use a GHashTable for tcg_find_helper
tcg: Delete tcg_helper_get_name declaration
tcg-hppa: Remove tcg backend
Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Output is a long, unsorted list. Not very helpful. Print one list
per device category instead, with a header line identifying the
category, plus a list of uncategorized devices. Print each list in
case-insenitive alphabetical order.
Devices with multiple categories are listed multiple times.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1381410021-1538-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts most of commit 3d1237fb2a.
The commit claims to sort the output of "-device help" "by
functionality rather than alphabetical". Issues:
* The output was unsorted before, not alphabetically sorted.
Misleading, but harmless enough.
* The commit doesn't just sort the output of "-device help" as it
claims, it adds categories to each line of "-device help", and it
prints devices once per category. In particular, devices without a
category aren't shown anymore. Maybe such devices should not exist,
but they do. Regression.
* Categories are also added to the output of "info qdm". Silent
change, not nice. Output remains unsorted, unlike "-device help".
I'm going to reimplement the feature we actually want, without the
warts. Reverting the flawed commit first should make it easier to
review. However, I can't revert it completely, since DeviceClass
member categories has been put to use. So leave that part in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1381410021-1538-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
qemu.org is held by a third-party and no core community contributor has
access to the DNS configuration. This leaves the website exposed to
outages due to DNS issues or IP address changes. For example, if the
web server IP address needs to change we cannot guarantee qemu.org will
point to it!
The newer qemu-project.org domain name is owned by Anthony Liguori
<anthony@codemonkey.ws>. You can confirm this by querying the whois
information. Also note that the #qemu IRC channel topic already
references qemu-project.org.
Short of having a dedicated legal entity to hold the domain name on
behalf of the community, qemu-project.org seems like the safest bet.
Let's replace references to qemu.org with qemu-project.org.
Note that git-submodule(1) does not detect URL changes. The following
commands clear out and re-initialize all submodules to ensure you are
using the latest URLs:
$ git submodule deinit . # you'll be warned if you have local changes
$ rm -rf .git/modules # also clear cached .git/ directories
$ git submodule update --init
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1381495958-8306-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Max Reitz (30) and others
# Via Kevin Wolf
* kwolf/for-anthony: (61 commits)
qemu-iotests: Add test for inactive L2 overlap
qemu-io: Let "open" pass options to block driver
vmdk: Fix vmdk_parse_extents
blockdev: blockdev_init() error conversion
blockdev: Don't disable COR automatically with blockdev-add
blockdev: Remove 'media' parameter from blockdev_init()
qemu-iotests: Check autodel behaviour for device_del
blockdev: Remove IF_* check for read-only blockdev_init
blockdev: Move virtio-blk device creation to drive_init
blockdev: Move bus/unit/index processing to drive_init
blockdev: Move parsing of 'boot' option to drive_init
blockdev: Moving parsing of geometry options to drive_init
blockdev: Move parsing of 'if' option to drive_init
blockdev: Move parsing of 'media' option to drive_init
blockdev: Pass QDict to blockdev_init()
blockdev: Separate ID generation from DriveInfo creation
blockdev: 'blockdev-add' QMP command
blockdev: Introduce DriveInfo.enable_auto_del
qapi-types/visit.py: Inheritance for structs
qapi-types/visit.py: Pass whole expr dict for structs
...
Message-id: 1381503951-27985-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.
Also, use overlap-check=all for all tests in 060.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an option to the open command to specify runtime options for the
block driver used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An extra 'p++' after while loop when *p == '\n' will move p to unknown
data position, risking parsing junk data or memory access violation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This gives us meaningful error messages for the blockdev-add QMP
command.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a read-only device is configured with copy-on-read=on, the old code
only prints a warning and automatically disables copy on read. Make it
a real error for blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The remaining users shouldn't be there with blockdev-add and are easy to
move to drive_init().
Bonus bug fix: As a side effect, CD-ROM drives can now use block drivers
on the read-only whitelist without explicitly specifying read-only=on,
even if a format is explicitly specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This requires moving the automatic ID generation at the same time, so
let's do that as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's already ignored and only prints a deprecation message. No use in
making it available in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves all of the geometry options (cyls/heads/secs/trans) to
drive_init so that they can only be accessed using legacy functions, but
never with anything blockdev-add related.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's always IF_NONE for blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves as much as possible of the processing of the 'media' option
to drive_init so that it can only be accessed using legacy functions,
but never with anything blockdev-add related.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Working on a QDict instead of a QemuOpts that accepts anything is more
in line with bdrv_open(). A QDict is what qmp_blockdev_add() already has
anyway, so this saves additional conversions. And last, but not least,
it allows later patches to easily extract legacy options into a
separate, typed QemuOpts for drive_init() (the untyped QemuOpts that
drive_init already has doesn't allow access to numbers, only strings,
and is therefore useless without conversion).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
BlockDriverStates shouldn't be affected by an unplugged guest device,
except if created with the legacy -drive command line option or the
drive_add HMP command.
Make the automatic deletion as well as cancelling of jobs conditional on
an enable_auto_del boolean that is only set in drive_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
This introduces a new 'base' key for struct definitions that refers to
another struct type. On the JSON level, the fields of the base type are
included directly into the same namespace as the fields of the defined
type, like with unions. On the C level, a pointer to a struct of the
base type is included.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Convert "fprintf(stderr,..." and standardize error messages:
Remove a few local_error's and use errp.
Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper
case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This command will package the clean operations in tests. Now root Makefile
simply calls the command and do not care the details of it any more. Original
the built binaries for test will not be removed, now they will be deleted
in clean operation.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Usually we may configure and make, then goto ./tests/qemu-iotest,
check. In this case an error will happen since helper program
was not built. This patch simply build it by default. A better way
may be introducing Makefile in ./tests/qemu-iotest, but it is more
complicate to handle out of tree case, and a bit overkill
for a single file now, we can do that when more files come.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-posix.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the blank line to above the test step banner, so it looks clearer
in blocks.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-win32.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Propagate errors in raw_create rather than directly reporting and
afterwards discarding them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Evaluate the runtime overlap check options and set
BDRVQcowState.overlap_check appropriately.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduces the macros QCOW2_OL_CONSTANT and QCOW2_OL_ALL in addition to
the already existing QCOW2_OL_CACHED, signifying all metadata overlap
checks that can be performed in constant time (regardless of image size
etc.) and truly all available overlap checks, respectively.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an array which assigns the option string to its corresponding
overlap check bit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add runtime options to tune the overlap checks to be performed before
write accesses.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the QCOW2_OL_DEFAULT macro by a variable overlap_check in
BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_check_metadata_overlap and qcow2_pre_write_overlap_check,
change the parameter signifying the checks to perform from its current
positive form to a negative one, i.e., it will no longer explicitly
specify every check to perform but rather a mask of checks not to
perform.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main intent of this patch is to consolidate the whitelist checks to
a single point in the code instead of spreading it everywhere. This adds
a nicer error message for read-only whitelisting, too, in places where
it was still missing.
The patch also contains a bonus bug fix: By finding the format first in
bdrv_open() and then independently checking against the whitelist only
later, we avoid the case that use of a non-whitelisted format results in
probing rather than an error message. Previously, this could happen when
using the driver=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
When trying to find a new snapshot ID, the existing ones are converted
to integers using strtoul. This function returns an unsigned long,
therefore its result should be saved in an unsigned long as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the new snapshot table could not be written in qcow2_snapshot_create,
the old snapshot table has to be restored in memory and the new one
released. This should include restoration of the old snapshot count as
well, which is added by this patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_write_compressed, if the compression fails, a normal cluster is
written to disk. This is done through bdrv_write on the qcow2 BDS
itself (using the guest offset), thus it is wrong to do a metadata
overlap check before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error message in qcow2_downgrade about an unsupported refcount
order is missing a space. This patch adds it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard Henderson
Anthony Liguori
Markus Armbruster
Stefan Hajnoczi
Max Reitz
Fam Zheng
Kevin Wolf
Wenchao Xia