The page that was previously linked in the source code and the README file is
no longer available so it now returns a 404 error message.
This puts a previous snapshot from archive.org instead.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add -kernel_irqchip=split
./x86-run x86/eventinj.flat
qemu-system-x86_64 -enable-kvm -machine kernel_irqchip=split -cpu host
-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4 -vnc
none -serial stdio -device pci-testdev -kernel x86/eventinj.flat
enabling apic
paging enabled
cr0 = 80010011
cr3 = 7fff000
cr4 = 20
Sending vec 33 and 62 and mask one with TPR
irq1 running
irq1 running
After 33/62 TPR test
FAIL: TPR
irq0 running
irq0 running
Both irq1 and irq0 are executing twice.
kvm_entry: vcpu 0
kvm_exit: reason MSR_WRITE rip 0x401f33 info 0 0
kvm_apic: apic_write APIC_EOI = 0x0
kvm_eoi: apicid 0 vector 62
kvm_msr: msr_write 80b = 0x0
kvm_entry: vcpu 0
kvm_exit: reason PENDING_INTERRUPT rip 0x401f35 info 0 0
kvm_userspace_exit: reason KVM_EXIT_IRQ_WINDOW_OPEN (7)
kvm_inj_virq: irq 62
kvm_entry: vcpu 0
kvm_exit: reason IO_INSTRUCTION rip 0x4016ec info 3fd0008 0
From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.
QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing. The printing calls
serial_update_irq() -> qemu_irq_lower() -> qemu_set_irq() ->
gsi_handler() -> qemu_set_irq() -> pic_irq_request() ->
apic_deliver_pic_intr() -> kvm_handle_interrupt()
kvm_handle_interrupt() does
interrupt_request |= CPU_INTERRUPT_HARD
which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.
This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473832464-3478-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulator while processing IO requests
could run into an infinite loop if 'pvscsi_ring_pop_req_descr'
always returned positive value. Limit IO loop to the ring size.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473845952-30785-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing IO request in mptsas, it uses g_new to allocate
a 'req' object. If an error occurs before 'req->sreq' is
allocated, It could lead to an OOB write in mptsas_free_request
function. Use g_new0 to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473684251-17476-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With an ejected block backend, blk_get_aio_context() would return
qemu_aio_context. In this case don't assert.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows uses object properties to determine the size of a file, so to
add object properties, we must also add a minimum set of new commands
and object properties. Most object properties are data that we already
have, except for the unique persistant object identifier. Windows
doesn't use this property, it seems, so we can cheat a bit and just use
the object handle for it.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: a741d0dd380cd7eb1695e1eb34ee6f341183f20a.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MTP requires that if a file is larger than 4gb or if sending data larger
than 4gb, that the length field be set to 0xFFFFFFFF.
Also widened a couple variables to prevent overflow errors.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: 01ad8ec7775f58575801ac3f13716f553a16815e.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Load the LAPIC state during post_load (rather than when the CPU
starts).
This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.
Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ISA DMA controller needs to be wired up to the ISA bus by
isa_bus_dma() to actually work.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1472660151-19517-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 8cc46787b5.
It turns out that cmd->frame can be NULL and thus the commit
can cause a SIGSEGV
Reported-by: Holger Schranz <holger@fam-schranz.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In PVSCSI paravirtual SCSI bus, pvscsi_convert_sglist can take a very
long time or go into an infinite loop due to two different bugs:
1) the request descriptor data length is defined to be 64 bit. While
building SG list from a request descriptor, it gets truncated to 32bit
in routine 'pvscsi_convert_sglist'. This could lead to an infinite loop
situation large 'dataLen' values when data_length is cast to uint32_t and
chunk_size becomes always zero. Fix this by removing the incorrect cast.
2) pvscsi_get_next_sg_elem can be called arbitrarily many times if the
element has a zero length. Get out of the loop early when this happens,
by introducing an upper limit on the number of SG list elements.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473108643-12983-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These issues cause respectively a QEMU crash and a leak of 2 bytes of
stack. They were discovered by VictorV of 360 Marvel Team.
Reported-by: Tom Victor <i-tangtianwen@360.cm>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When LSI SAS1068 Host Bus emulator builds configuration page
headers, mptsas_config_pack() should assert that the size
fits in a byte. However, the size is expressed in 32-bit
units, so up to 1020 bytes fit. The assertion was only
allowing replies up to 252 bytes, so fix it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472645167-30765-2-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the page count for these rings to
an arbitrary value, leading to infinite loop or OOB access.
Add check to avoid it.
Reported-by: Tom Victor <vv474172261@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472626169-12989-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
slave:~/.xie/qemu-colo # gcc --version
gcc (SUSE Linux) 4.3.4 [gcc-4_3-branch revision 152973]
slave:~/.xie/qemu-colo # make -j8
CC hw/net/e1000e_core.o
hw/net/e1000e_core.c:56: warning: ‘e1000e_set_interrupt_cause’ declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of ‘e1000e_set_interrupt_cause’ was here
LINK x86_64-softmmu/qemu-system-x86_64
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Display the slot number of mhp_pc_dimm_assigned_slot()
using "%d" without the "0x".
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the xhci uses msix, it doesn't free the corresponding
memory, thus leading a memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 57d7d2e0.d4301c0a.d13e9.9a55@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old one is confusing with @virtio_device_info in virtio.c,
so make it more appropriate.
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Message-id: 1470214147-32560-1-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can't hotplug display adapters in qemu, tag virtio-gpu-pci
accordingly (virtio-vga already has this).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1473319037-27645-1-git-send-email-kraxel@redhat.com
When processing svga command DEFINE_CURSOR in vmsvga_fifo_run,
the computed BITMAP and PIXMAP size are checked against the
'cursor.mask[]' and 'cursor.image[]' array sizes in bytes.
Correct these checks to avoid OOB memory access.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1473338754-15430-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The companion descriptor is present on all usb3 devices, not only
those with streams support. We need to check attributes to see
whenever the device uses streams or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1473406890-30164-1-git-send-email-kraxel@redhat.com
Previously the code would incorrectly report the remainder as 8 bytes. A
remainder of 0 bytes should be reported when the SETUP packet is
successfully transferred. Found using FreeBSD's XHCI driver.
Signed-off-by: Hans Petter Selasky <hps@selasky.org>
[ kraxel: codestyle fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set vring call fd unconditionally even if guest driver does
not use MSIX for this vritqueue at all. This will cause lots of
unnecessary userspace access and other checks for drivers does not use
interrupt at all (e.g virtio-net pmd). So check and clean vring call
fd if guest does not use any vector for this virtqueue at
all.
Perf diffs (on rx) shows lots of cpus wasted on vhost_signal() were saved:
#
28.12% -27.82% [vhost] [k] vhost_signal
14.44% -1.69% [kernel.vmlinux] [k] copy_user_generic_string
7.05% +1.53% [kernel.vmlinux] [k] __free_page_frag
6.51% +5.53% [vhost] [k] vhost_get_vq_desc
...
Pktgen tests shows 15.8% improvement on rx pps and 6.5% on tx pps.
Before: RX 2.08Mpps TX 1.35Mpps
After: RX 2.41Mpps TX 1.44Mpps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statistics virtqueue is not migrated properly because virtio-balloon
does not include s->stats_vq_elem in the migration stream.
After migration the statistics virtqueue hangs because the host never
completes the last element (s->stats_vq_elem is NULL on the destination
QEMU). Therefore the guest never submits new elements and the virtqueue
is hung.
Instead of changing the migration stream format in an incompatible way,
detect the migration case and rewind the virtqueue so the last element
can be completed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The one pending element is being freed but not discarded on device
reset, which causes svq->inuse to creep up, eventually hitting the
"Virtqueue size exceeded" error.
Properly discarding the element on device reset makes sure that its
buffers are unmapped and the inuse counter stays balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will used by the next patch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify a bit the code by using g_strdup_printf() and store it in a
non-const value so casting is no longer needed, and ownership is
clearer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Free the timer allocated in instance_init.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Further cleanup would need to call qemu_free_irq() at the appropriate
time, but for now this silences ASAN about direct leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The free_ranges array is used as a temporary pointer array, the segment
should still be freed, however, it shouldn't free the elements themself.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
qemu_irq is already a pointer, no need to have an extra pointer level.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
-----BEGIN PGP SIGNATURE-----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=T1rz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160907' into staging
ppc patch queue for 2016-Sep-7
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
# gpg: Signature made Wed 07 Sep 2016 07:09:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160907: (64 commits)
tests: Check serial output of firmware boot of some machines
tests: Resort check-qtest entries in Makefile.include
spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
ppc: Improve a few more helper flags
ppc: Improve the exception helpers flags
ppc: Improve flags for helpers loading/writing the time facilities
ppc: Don't generate dead code on unconditional branches
ppc: Stop dumping state on all exceptions in linux-user
ppc: Fix catching some segfaults in user mode
ppc: Fix macio ESCC legacy mapping
hw/ppc: add a ppc_create_page_sizes_prop() helper routine
hw/ppc: use error_report instead of fprintf
ppc: Rename #include'd .c files to .inc.c
target-ppc: add extswsli[.] instruction
target-ppc: add vsrv instruction
target-ppc: add vslv instruction
target-ppc: add vcmpnez[b,h,w][.] instructions
target-ppc: add vabsdu[b,h,w] instructions
target-ppc: add dtstsfi[q] instructions
target-ppc: implement branch-less divd[o][.]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kernel v4.0, linux uses H_CHANGE_LOGICAL_LAN_MAC to change lively
the MAC address of an ibmveth interface.
As QEMU doesn't implement this h_call, we can't change anymore the
MAC address of an spapr-vlan interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current mapping, while correct for the base ports (which is all the
driver uses these days), is wrong for the extended registers.
I suspect the bugs come from incorrect tables in the CHRP IO Ref document,
I have verified the new values here match Apple's MacTech.pdf.
Note: Nothing that I know of actually uses these registers so it's not a
huge deal, but this patch has the added advantage of adding comments to
document what the registers are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We abort a few lines above if kernel_xics_fd == -1.
This is only code cleanup.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Correct bad name of the vmstate structure. Since this breaks
compatibility also update vmstate version back to 0 and make
all fields independent of the VMState version.
Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1473146346-27337-1-git-send-email-marcin.krzeminski@nokia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current QEMU will stall guest VM booting under ACPI mode when vcpu count
is >= 12. Analyzing the booting log, it turns out that DSDT table can't
be loaded correctly due to "Invalid character(s) in name (0x62303043),
repaired: [C00*]". This is because existing QEMU uses a lower case AML
ID for CPU devices (e.g. C000, C001, ..., C00a, C00b). The ACPI code
inside guest VM detects this lower case character as an invalid character
(see acpi_ut_valid_acpi_char() in drivers/acpi/acpica/utstring.c file)
and converts it to "*". This causes duplicated IDs (i.e. "C00a" ==>"C00*"
and "C00b" ==> "C00*"). So ACPI refuses to load the table.
This patch fixes the problem by changing the format with a upper case
character. It matches the CPU ID formats used in other parts of QEMU
code.
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1472852809-23042-1-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The uboot in the previous release of the SDK was using a hardcoded
value for memory size. This is not true anymore, the value is now
retrieved from the memory controller.
Below is a model for this device, only supporting unlock and
configuration. Without it, we endup running a guest with 64MB, which
is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to
build a default value. Some bits should be linked to SCU strapping
registers but it seems a bit complex to add for the current need.
The model is ready for the AST2500 SOC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=LZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 06 Sep 2016 11:38:01 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (36 commits)
block: Allow node name for 'qemu-io' HMP command
qemu-iotests: Log QMP traffic in debug mode
block jobs: Improve error message for missing job ID
coroutine: Assert that no locks are held on termination
coroutine: Let CoMutex remember who holds it
qcow2: fix iovec size at qcow2_co_pwritev_compressed
test-coroutine: Fix coroutine pool corruption
qemu-iotests: add vmdk for test backup compression in 055
qemu-iotests: test backup compression in 055
blockdev-backup: added support for data compression
drive-backup: added support for data compression
block: simplify blockdev-backup
block: simplify drive-backup
block/io: turn on dirty_bitmaps for the compressed writes
block: remove BlockDriver.bdrv_write_compressed
qcow: cleanup qcow_co_pwritev_compressed to avoid the recursion
qcow: add qcow_co_pwritev_compressed
vmdk: add vmdk_co_pwritev_compressed
qcow2: cleanup qcow2_co_pwritev_compressed to avoid the recursion
qcow2: add qcow2_co_pwritev_compressed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- cpumodel support for s390x
- various fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hiH2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160906-v2' into staging
First (big) chunk of s390x updates:
- cpumodel support for s390x
- various fixes and improvements
# gpg: Signature made Tue 06 Sep 2016 16:09:53 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20160906-v2: (38 commits)
s390x/cpumodel: implement QMP interface "query-cpu-model-baseline"
s390x/cpumodel: implement QMP interface "query-cpu-model-comparison"
s390x/cpumodel: implement QMP interface "query-cpu-model-expansion"
qmp: add QMP interface "query-cpu-model-baseline"
qmp: add QMP interface "query-cpu-model-comparison"
qmp: add QMP interface "query-cpu-model-expansion"
s390x/kvm: don't enable key wrapping if msa3 is disabled
s390x/kvm: let the CPU model control CMM(A)
s390x/kvm: disable host model for problematic compat machines
s390x/kvm: implement CPU model support
s390x/kvm: allow runtime-instrumentation for "none" machine
s390x/sclp: propagate hmfai
s390x/sclp: propagate the mha via sclp
s390x/sclp: propagate the ibc val (lowest and unblocked ibc)
s390x/sclp: indicate sclp features
s390x/sclp: introduce sclp feature blocks
s390x/sclp: factor out preparation of cpu entries
s390x/cpumodel: check and apply the CPU model
s390x/cpumodel: let the CPU model handle feature checks
s390x/cpumodel: expose features and feature groups as properties
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To be able to query the correct host model for the "none" machine,
let's allow runtime-instrumentation for that machine.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-21-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The mha is provided in the CPU model, so get any CPU and extract the value.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we have a lowest ibc, we can indicate the ibc to the guest.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have three different blocks in the SCLP read-SCP information response
that indicate sclp features. Let's prepare propagation.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-16-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's factor out the common code of "read cpu info" and "read scp
info". This will make the introduction of new cpu entry fields easier.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-14-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch introduces two CPU models, "host" and "qemu".
"qemu" is used as default when running under TCG. "host" is used
as default when running under KVM. "host" cannot be used without KVM.
"host" is not migration-safe. They both inherit from the base s390x CPU,
which is turned into an abstract class.
This patch also changes CPU creation to take care of the passed CPU string
and reuses common code parse_features() function for that purpose. Unknown
CPU definitions are now reported. The "-cpu ?" and "query-cpu-definition"
commands are changed to list all CPU subclasses automatically, including
migration-safety and whether static.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-3-dahi@linux.vnet.ibm.com>
[CH: fix up self-assignments in s390_cpu_list, as spotted by clang]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This allows the creation of an empty scsi-cd device without manually
creating a BlockBackend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows the creation of an empty ide-cd device without manually
creating a BlockBackend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
The cssid 255 is reserved but still valid from an architectural
point of view. However, feeding a bogus schid of 0xffffffff into
the virtio hypercall will lead to a crash:
Stack trace of thread 138363:
#0 0x00000000100d168c css_find_subch (qemu-system-s390x)
#1 0x00000000100d3290 virtio_ccw_hcall_notify
#2 0x00000000100cbf60 s390_virtio_hypercall
#3 0x000000001010ff7a handle_hypercall
#4 0x0000000010079ed4 kvm_cpu_exec (qemu-system-s390x)
#5 0x00000000100609b4 qemu_kvm_cpu_thread_fn
#6 0x000003ff8b887bb4 start_thread (libpthread.so.0)
#7 0x000003ff8b78df0a thread_start (libc.so.6)
This is because the css array was only allocated for 0..254
instead of 0..255.
Let's fix this by bumping MAX_CSSID to 255 and fencing off the
reserved cssid of 255 during css image allocation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
With the current code a simple sclp command takes about 13000 ns
The biggest part seems to be the resolver of the object model. By
caching the sclp device the time for an sclp command goes down to
2500ns. Talking about real life scenarios, this change doubles
the speed of the sclp console when sending single bytes outputs
to /dev/console.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If one pci device is plugged successfully, there must be a zpci device
existing. This means that during hot-unplugging a pci device, its
corresponding zpci device must be found. Therefore we use an assert to
replace current code.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In the case that zpci is automatically created, we did not return
immediately on failure, which would lead to NULL pointer dereferencing.
Let's fix it.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The qdisk implementation is using the native xenbus protocol only in
case of no protocol specified at all. As using the explicit 32- or
64-bit protocol is slower than the native one due to copying requests
not by memcpy but element for element, this is not optimal.
Correct this by using the native protocol in case word sizes of
frontend and backend match.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The 9P spec at http://man.cat-v.org/plan_9/5/intro says:
All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot). The parent of the root directory of a server's
tree is itself.
This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".
This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:
The names . and .. are special; it is illegal to create files with these
names.
This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".
Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:
- mknod
- rename
- renameat
- mkdir
- link
- symlink
The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).
The various error values come from the linux manual pages.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.
Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.
Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".
This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.
If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.
[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/intro
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jm4E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 28ed5ef163.
I still think it's the right thing to do, but
tests have been failing sporadically.
Revert for now, and hope to fix it before the release.
Cc: Prerna Saxena <prerna.saxena@nutanix.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <mlureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1471268075-3425-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
emu_regs is a pointer, ARRAY_SIZE doesn't return what we expect.
Since the remaining message is enough for debugging, so just remove it.
Also tweaked the message a little.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The virtio-console.c file handles both serial consoles
and interactive consoles, since they're backed by the
same device model.
Since serial devices are expected to be reliable and
need to notify the guest when the backend is opened
or closed, the virtio-console.c file wires up support
for chardev events. This affects both serial consoles
and interactive consoles, using a network connection
based chardev backend such as 'socket', but not when
using a PTY based backend or plain 'file' backends.
When the host side is not connected the handle_output()
method in virtio-serial-bus.c will drop any data sent
by the guest, before it even reaches the virtio-console.c
code. This means that if the chardev has a logfile
configured, the data will never get logged.
Consider for example, configuring a x86_64 guest with a
plain UART serial port
-chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on
-device isa-serial,chardev=charserial1,id=serial1
vs a s390 guest which has to use the virtio-console port
-chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on
-device virtconsole,chardev=charconsole1,id=console1
The isa-serial one gets data written to the log regardless
of whether a client is connected, while the virtioconsole
one only gets data written to the log when a client is
connected.
There is no need for virtio-serial-bus.c to aggressively
drop the data for console devices, as the chardev code is
prefectly capable of discarding the data itself.
So this patch changes virtconsole devices so that they
are always marked as having the host side open. This
ensures that the guest OS will always send any data it
has (Linux virtio-console hvc driver actually ignores
the host open state and sends data regardless, but we
should not rely on that), and also prevents the
virtio-serial-bus code prematurely discarding data.
The behaviour of virtserialport devices is *not* changed,
only virtconsole, because for the former, it is important
that the guest OSknow exactly when the host side is opened
/ closed so it can do any protocol re-negotiation that may
be required.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The set_mem_table command currently does not seek a reply. Hence, there is
no easy way for a remote application to notify to QEMU when it finished
setting up memory, or if there were errors doing so.
As an example:
(1) Qemu sends a SET_MEM_TABLE to the backend (eg, a vhost-user net
application). SET_MEM_TABLE does not require a reply according to the spec.
(2) Qemu commits the memory to the guest.
(3) Guest issues an I/O operation over a new memory region which was configured on (1).
(4) The application has not yet remapped the memory, but it sees the I/O request.
(5) The application cannot satisfy the request because it does not know about those GPAs.
While a guaranteed fix would require a protocol extension (committed separately),
a best-effort workaround for existing applications is to send a GET_FEATURES
message before completing the vhost_user_set_mem_table() call.
Since GET_FEATURES requires a reply, an application that processes vhost-user
messages synchronously would probably have completed the SET_MEM_TABLE before replying.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces the VHOST_USER_PROTOCOL_F_REPLY_ACK.
If negotiated, client applications should send a u64 payload in
response to any message that contains the "need_reply" bit set
on the message flags. Setting the payload to "zero" indicates the
command finished successfully. Likewise, setting it to "non-zero"
indicates an error.
Currently implemented only for SET_MEM_TABLE.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'vhost_set_vring_enable()' tries to call function using pointer to
'vhost_ops' which can be already zeroized in 'vhost_dev_cleanup()'
while vhost disconnection.
Fix that by checking 'vhost_ops' before using. This fixes QEMU crash
on calling 'ethtool -L eth0 combined 2' if vhost disconnected.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:
1) We register a real type with the CPU alias name in
spapr_cpu_core_register_types() - this prevents us from registering
a CPU family name in kvm_ppc_register_host_cpu_type() with the same
name (as we do it for the non-hotpluggable CPU types).
2) It's quite cumbersome to maintain the aliases here in sync with the
ppc_cpu_aliases list from target-ppc/cpu-models.c.
So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Followup to 87ac25fd, this time for ATAPI DMA.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1470164128-28158-1-git-send-email-jsnow@redhat.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
The .receive callback of xlnx.xps-ethernetlite doesn't check the length
of data before calling memcpy. As a result, the NetClientState object in
heap will be overflowed. All versions of qemu with xlnx.xps-ethernetlite
will be affected.
Reported-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Vmxnet3 device emulator does not check if the device is active,
before using it for write. It leads to a use after free issue,
if the vmxnet3_io_bar0_write routine is called after the device is
deactivated. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network transport abstraction layer supports packet fragmentation.
While fragmenting a packet, it checks for more fragments from
packet length and current fragment length. It is susceptible
to an infinite loop, if the current fragment length is zero.
Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
get_image_size() doesn't handle being passed a NULL pointer, so
avoid doing that. Spotted by the clang ub sanitizer (which notices
the attempt to pass NULL to open()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1470391439-28427-1-git-send-email-peter.maydell@linaro.org
If a qdev block device is created with an anonymous BlockBackend (i.e.
a node name rather than a BB name was given for the drive property),
qdev used to return an empty string when the property was read. This
patch fixes it to return the node name instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We should make sure that it's not NULL firstly.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When a TCE table (sPAPR IOMMU context) is in disabled state (which is true
by default for the 64-bit window), it has tcet->nb_table == 0 and
tcet->table == NULL. However, on system reset, spapr_tce_reset() executes,
which unconditionally calls
memset(tcet->table, 0, table_size);
We get away with this in practice, because it's a zero length memset(),
but memset() on a NULL pointer is undefined behaviour, so we should not
call it in this case.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
res_count should be set to the number of outstanding bytes after a DBDMA
request. Unfortunately this wasn't being set to zero by the non-block
transfer codepath meaning drivers that checked the descriptor result for
such requests (e.g reading the CDROM TOC) would assume from a non-zero result
that the transfer had failed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior to c8721d3 "spapr: Error out when CPU hotplug is attempted on older
pseries machines", attempting to use query-hotpluggable-cpus on pseries-2.6
and earlier machine types would SEGV.
That change fixed that, but due to some unexpected interactions in init
order and a brown-paper-bag worthy failure to test, it accidentally
disabled query-hotpluggable-cpus for all pseries machine types, including
the current one which should allow it.
In fact, query_hotpluggable_cpus needs to be non-NULL when and only when
the dr_cpu_enabled flag in sPAPRMachineClass is set, which makes
dr_cpu_enabled itself redundant.
This patch removes dr_cpu_enabled, instead directly setting
query_hotpluggable_cpus from the machine class_init functions, and using
that to determine the availability of CPU hotplug when necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ahci-test /x86_64/ahci/io/dma/lba28/retry triggers the following leak:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7fc4b2a25e20 in malloc (/lib64/libasan.so.3+0xc6e20)
#1 0x7fc4993bce58 in g_malloc (/lib64/libglib-2.0.so.0+0x4ee58)
#2 0x556a187d4b34 in ahci_populate_sglist hw/ide/ahci.c:896
#3 0x556a187d8237 in ahci_dma_prepare_buf hw/ide/ahci.c:1367
#4 0x556a187b5a1a in ide_dma_cb hw/ide/core.c:844
#5 0x556a187d7eec in ahci_start_dma hw/ide/ahci.c:1333
#6 0x556a187b650b in ide_start_dma hw/ide/core.c:921
#7 0x556a187b61e6 in ide_sector_start_dma hw/ide/core.c:911
#8 0x556a187b9e26 in cmd_write_dma hw/ide/core.c:1486
#9 0x556a187bd519 in ide_exec_cmd hw/ide/core.c:2027
#10 0x556a187d71c5 in handle_reg_h2d_fis hw/ide/ahci.c:1204
#11 0x556a187d7681 in handle_cmd hw/ide/ahci.c:1254
#12 0x556a187d168a in check_cmd hw/ide/ahci.c:510
#13 0x556a187d0afc in ahci_port_write hw/ide/ahci.c:314
#14 0x556a187d105d in ahci_mem_write hw/ide/ahci.c:435
#15 0x556a1831d959 in memory_region_write_accessor /home/elmarco/src/qemu/memory.c:525
#16 0x556a1831dc35 in access_with_adjusted_size /home/elmarco/src/qemu/memory.c:591
#17 0x556a18323ce3 in memory_region_dispatch_write /home/elmarco/src/qemu/memory.c:1262
#18 0x556a1828cf67 in address_space_write_continue /home/elmarco/src/qemu/exec.c:2578
#19 0x556a1828d20b in address_space_write /home/elmarco/src/qemu/exec.c:2635
#20 0x556a1828d92b in address_space_rw /home/elmarco/src/qemu/exec.c:2737
#21 0x556a1828daf7 in cpu_physical_memory_rw /home/elmarco/src/qemu/exec.c:2746
#22 0x556a183068d3 in cpu_physical_memory_write /home/elmarco/src/qemu/include/exec/cpu-common.h:72
#23 0x556a18308194 in qtest_process_command /home/elmarco/src/qemu/qtest.c:382
#24 0x556a18309999 in qtest_process_inbuf /home/elmarco/src/qemu/qtest.c:573
#25 0x556a18309a4a in qtest_read /home/elmarco/src/qemu/qtest.c:585
#26 0x556a18598b85 in qemu_chr_be_write_impl /home/elmarco/src/qemu/qemu-char.c:387
#27 0x556a18598c52 in qemu_chr_be_write /home/elmarco/src/qemu/qemu-char.c:399
#28 0x556a185a2afa in tcp_chr_read /home/elmarco/src/qemu/qemu-char.c:2902
#29 0x556a18cbaf52 in qio_channel_fd_source_dispatch io/channel-watch.c:84
Follow John Snow recommendation:
Everywhere else ncq_err is used, it is accompanied by a list cleanup
except for ncq_cb, which is the case you are fixing here.
Move the sglist destruction inside of ncq_err and then delete it from
the other two locations to keep it tidy.
Call dma_buf_commit in ide_dma_cb after the early return. Though, this
is also a little wonky because this routine does more than clear the
list, but it is at the moment the centralized "we're done with the
sglist" function and none of the other side effects that occur in
dma_buf_commit will interfere with the reset that occurs from
ide_restart_bh, I think
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
qdev_get_dev_path() returns an allocated string, free it when no longer
needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The list is created during instance init and further populated with
usb_desc_set_string(). Clear it when unrealizing the device.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Clear the list when finalizing. The list is created during realize with
virtio_input_idstr_config() and later by further calls to
virtio_input_init_config() and virtio_input_add_config().
This leak can be reproduced with device-introspect-test -p
/x86_64/device/introspect/concrete.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Each irq is referenced by the IDEBus in ide_init2(), thus we can free
the no longer used array.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
This is stale after commit 6e40b3bf (virtio-blk: Use blk_drain() to
drain IO requests), remove it.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1470278654-13525-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At system_reset, there is no point in retrying the queued request,
because the driver that issued the request won't be around any more.
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1470278654-13525-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The broken Identify implementation in earlier Qemu versions means we
need to blacklist it from issueing the NVMe 1.1 Identify Namespace List
command. As we want to be able to use it in newer Qemu versions we need
a way to identify those. Bump the PCI revision as a guest visible
indicator of this bug fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NVMe 1.1 requires devices to implement a Namespace List subcommand of
the identify command. Qemu not only not implements this features, but
also misinterprets it as an Identify Controller request. Due to this
any OS trying to use the Namespace List will fail the probe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5a11d0f7 mistakenly converted a log message into an error
condition when no pin interrupt is found for the pci device being
passed through. Revert that part of the commit.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
* remove unused functions
* qht segfault and memory leak fixes
* NBD fixes
* Fix for non-power-of-2 discard granularity
* Memory hotplug fixes
* Migration regressions
* IOAPIC fixes and (disabled by default) EOI register support
* Various other small fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJXoiNRFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
ZwMH/1HmEYIAyyd9T8z2sNjdN7vKCNsphS7OXALDnwTp+VX4icUbf41NC6Eeg/e+
6OKA90KSBTquG3wxsXrUK5Nwy7EKMoCXVQrdYw5T04OidQLtJosKgPx4MrvPSx8h
caFUXo9WynT/aGRNc14gnZZiooQxsy/JoNhuml/WL0nupEmoUb/Ns3Yo++HRHntR
rFmJvvD9SrQsWzd9+aJ8zm+Qi09gXsbj1grr6LHCLVmwDWAJooFev6MqBvplkL50
OLqCJfAXJ2srUoEboVdg3V+sFtB8Eru+iMdpZyLwo07V4BBK7heEsXx6JJkTObMC
90MSnMo6BauUO/R/bMvvLlNWykU=
=XqbI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* xsetbv fix (x86 targets TCG)
* remove unused functions
* qht segfault and memory leak fixes
* NBD fixes
* Fix for non-power-of-2 discard granularity
* Memory hotplug fixes
* Migration regressions
* IOAPIC fixes and (disabled by default) EOI register support
* Various other small fixes
# gpg: Signature made Wed 03 Aug 2016 18:01:05 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (25 commits)
util: Fix assertion in iov_copy() upon zero 'bytes' and non-zero 'offset'
qdev: Fix use after free in qdev_init_nofail error path
Reorganize help output of '-display' option
x86: ioapic: add support for explicit EOI
x86: ioapic: ignore level irq during processing
apic: fix broken migration for kvm-apic
fw_cfg: Make base type "fw_cfg" abstract
block: Cater to iscsi with non-power-of-2 discard
osdep: Document differences in rounding macros
nbd: Limit nbdflags to 16 bits
nbd: Fix bad flag detection on server
i2c: fix migration regression introduced by broadcast support
mptsas: really fix migration compatibility
qdist: return "(empty)" instead of NULL when printing an empty dist
qdist: use g_renew and g_new instead of g_realloc and g_malloc.
qdist: fix memory leak during binning
target-i386: fix typo in xsetbv implementation
qht: do not segfault when gathering stats from an uninitialized qht
util: Drop inet_listen()
util: drop unix_nonblocking_connect()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 69382d8b (qdev: Fix object reference leak in case device.realize()
fails), object_property_set_bool could release the object. The error
path wants the type name, so hold an reference before realizing it.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470109301-12966-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some old Linux kernels (upstream before v4.0), or any released RHEL
kernels has problem in sending APIC EOI when IR is enabled. Meanwhile,
many of them only support explicit EOI for IOAPIC, which is only
introduced in IOAPIC version 0x20. This patch provide a way to boost
QEMU IOAPIC to version 0x20, in order for QEMU to correctly receive EOI
messages.
Without boosting IOAPIC version to 0x20, kernels before commit d32932d
("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
will have trouble enabling both IR and level-triggered interrupt devices
(like e1000).
To upgrade IOAPIC to version 0x20, we need to specify:
-global ioapic.version=0x20
To be compatible with old systems, 0x11 will still be the default IOAPIC
version. Here 0x11 and 0x20 are the only versions to be supported.
One thing to mention: this patch only applies to emulated IOAPIC. It
does not affect kernel IOAPIC behavior.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1470059959-372-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For level triggered interrupts, we will get Remote IRR bit cleared after
guest kernel finished processing specific request. Before that, we
should ignore the same interrupt from triggering again.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1469974685-4144-1-git-send-email-peterx@redhat.com>
[Push new "if" up so that it covers KVM split irqchip as well. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Missed when commit 5712db6 split off "fw_cfg_io" and "fw_cfg_mem".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1469777353-9383-1-git-send-email-armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU fails migration with following error:
qemu-system-x86_64: Missing section footer for i2c_bus
qemu-system-x86_64: load of migration failed: Invalid argument
when migrating from:
qemu-system-x86_64-v2.6.0 -m 256M rhel72.img -M pc-i440fx-2.6
to
qemu-system-x86_64-v2.7.0-rc0 -m 256M rhel72.img -M pc-i440fx-2.6
Regression is added by commit 2293c27f (i2c: implement broadcast write)
Fix it by dropping 'broadcast' VMState introduced by 2293c27f and
reuse broadcast 0x00 address as broadcast flag in bus->saved_address.
Then if there were ongoing broadcast at migration time, set
bus->saved_address to it and at i2c_slave_post_load() time check
for it instead of transfering and using 'broadcast' VMState.
As result of reusing existing saved_address VMState, no compat
glue will be needed to keep forward/backward compatiblity. which
makes fix much less intrusive.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469623198-177227-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 2e2aa316 removed internal flag msi_in_use, but it
existed in vmstate. Restore it for migration to older QEMU
versions.
Reported-by: Amit Shah <amit.shah@redhat.com>
Suggested-by: Amit Shah <amit.shah@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of calling xen_be_register() for each supported backend type
for hvm and pv guests in their machine init functions use a common
function in order not to have to add new backends twice.
This at once fixes the error that hvm domains couldn't use the qusb
backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1470119552-16170-1-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When unplugging a device in the Xen pvusb backend drain the submit
queue before deallocation of the control structures. Otherwise there
will be bogus memory accesses when I/O contracts are finished.
Correlated to this issue is the handling of cancel requests: a packet
cancelled will still lead to the call of complete, so add a flag
to the request indicating it should be just dropped on complete.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1470140044-16492-3-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When a Xenstore watch fires indicating a backend has to be removed
don't remove all backends for that domain with the specified device
index, but just the one which has the correct type.
The easiest way to achieve this is to use the already determined
xendev as parameter for xen_be_del_xendev() instead of only the domid
and device index.
This at once removes the open coded QTAILQ_FOREACH_SAVE() in
xen_be_del_xendev() as there is no need to search for the correct
xendev any longer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1470140044-16492-2-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CPU hotplug and coldplug aren't supported prior to pseries-2.7. Further,
earlier machine types don't use CPU core objects at all. These mean that
query-hotpluggable-cpus and coldplug on older pseries machines will crash
QEMU. It also means that hotpluggable_cpus flag in query-machines will
be incorrectly set to true for pseries < 2.7, since it is based on the
presence of the query_hotpluggable_cpus hook.
- Don't assign the query_hotpluggable_cpus hook for pseries < 2.7
- query_hotpluggable_cpus should therefore never be called on pseries <
2.7, so add an assert
- spapr_core_pre_plug() should fail hot/cold plug attempts for pseries <
2.7, since core objects are never used there
- spapr_core_plug() should therefore never be called for pseries < 2.7, so
add an assert.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Change from query_hotpluggable_cpus returning NULL for pseries < 2.7
to not being called at all, reword commit message for accuracy]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ehci_update_frindex takes time linearly proportional to a number
of uframes to calculate new frame index and raise FLR interrupts,
which is a problem for large amounts of uframes.
If we experience large delays between echi timer callbacks (i.e. because
other periodic handlers have taken a lot of time to complete) we
get a lot of skipped frames which then delay ehci timer callback more
and this leads to deadlocking the system when ehci schedules next
callback to be too soon.
Observable behaviour is qemu consuming 100% host CPU time while guest
is unresponsive. This misbehavior could happen for a while and QEMU does
not get out from this state automatically without the patch.
This change makes ehci_update_frindex execute in constant time.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1469638520-32706-1-git-send-email-den@openvz.org
CC: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libusb.h uses the WINAPI calling convention for all function callbacks.
Cross compilation with Mingw-w64 on Cygwin fails when this calling
convention is missing.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1469775331-7468-1-git-send-email-sw@weilnetz.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The local variable i is unsed for Windows.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1469775569-7869-1-git-send-email-sw@weilnetz.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Here are the current pending ppc and spapr related patches for
qemu-2.7. Given the freeze status, these are all bugfixes, with two
exceptions:
* There's some final rework of the vcpu hotplug model. Specifically
we add spapr specific code on the generic basis Igor established
to make cpu_index stable for pseries-2.7 and later machine types.
- This allows us to remove the limitation that cpu cores had to
be inserted in linear order, and removed in LIFO order.
- This is worth merging this late in 2.7 because it will avoid
considerable future grief with management layers needing to
discover whether out-of-order hotplug is possible, amongst
other things.
- For now we do add a constraint that the initial cpu cannot be
unplugged.
* We add two extra testcases to make check, for postcopy and
drive_del on ppc64.
- Not strictly bugfixes, but safe, because they don't affect the
actual code, and increase test coverage.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXmuB6AAoJEGw4ysog2bOSboIQANFAPB5c33cgRv1Fe2csqHor
Z3VfjP72/sittYxEHVwhxnbmzCHpYb0KN2AZTrHBjXkryWZR/yjXDebiV9HM7NCy
BOA8euberkfyde3HYptcviaqypmnHOZqcJicx1+jtTG2iKSGb8HVeM5KO3a6aKvQ
6yGngUy8NCMrVmGPNlG/Q2Y8wkGVDbr8A2h6xJGJKC8Ol+IV3WNCaZIXLst/2q/O
UbYr1thoWG32nAu4asUOg6rExfirjcr16hYEbDzREnhUK4AYykosmeOw1kRg/Oki
JVVFhRlgEsZ4htLBtenBv+MLPoFWXY2PHp90Lx5ITLkLwmfgxmoRgaQvBYlcJNSA
Jt7j4THhHw0ppPGrQf4L0M3wt+peyvNo4IGbaeAojamctnu9b6TLEjbhiDd66onB
bgPy3Diwti+vRt2k1q0CSwB+mlUbS1TisK0y1BG1ob9TbtWfZRVDRCVuTJI0fzX7
cneaOzKu660pct06ciOTb0TSrvdhNYehBpHHm4pdzc8kU0mRJpPhhX38iCPMyTA3
eTGLOYyz6sHQjwvys6/TtDm8A+5Aot65WW0Y1OpM9iLx+20lRE/KLzmYtC+GB4T3
KjdRLNzKaC+CAbc/c1zBQvPIPW95Le9Pmq87ZZUovg8UXt8RdSldzpg98krHfLoG
itDVvgUwydTbzXABOTFY
=t6gz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160729' into staging
ppc patch queue 2016-07-29
Here are the current pending ppc and spapr related patches for
qemu-2.7. Given the freeze status, these are all bugfixes, with two
exceptions:
* There's some final rework of the vcpu hotplug model. Specifically
we add spapr specific code on the generic basis Igor established
to make cpu_index stable for pseries-2.7 and later machine types.
- This allows us to remove the limitation that cpu cores had to
be inserted in linear order, and removed in LIFO order.
- This is worth merging this late in 2.7 because it will avoid
considerable future grief with management layers needing to
discover whether out-of-order hotplug is possible, amongst
other things.
- For now we do add a constraint that the initial cpu cannot be
unplugged.
* We add two extra testcases to make check, for postcopy and
drive_del on ppc64.
- Not strictly bugfixes, but safe, because they don't affect the
actual code, and increase test coverage.
# gpg: Signature made Fri 29 Jul 2016 05:50:02 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160729:
tests: add drive_del-test to ppc/ppc64
spapr: Prevent boot CPU core removal
ppc: Fix fault PC reporting for lve*/stve* VMX instructions
test: port postcopy test to ppc64
Revert "spapr: Ensure CPU cores are added contiguously and removed in LIFO order"
spapr: init CPUState->cpu_index with index relative to core-id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmslFAAoJECgfDbjSjVRpev0IAMZghEuSeKMB2JR88dErS8P5
J6y/1W2VFuRa1YBkTz/ecr5r2RwIO5teZUZpUkibM65Zo6bu1liMo6gbzeCg/xOi
k437pNRl6W9RVWuXQM9VOegNoGYhX3Hrnu3iQeiT8KRY3OMCwG52umUXYVodJh1R
mlozlEcSyUEDZVdNjhRECuUiw8RRcErEtiKda+zjkf4tPAGkyCItVpLYshE6A2/I
lfQLkv+EWOyuD4cfEHl+4F9K9wegothFTSd/xBmcqqaWRc+pboMVF2A2yga+GjKm
Xgb8SzQYkt9Q1nFr9fz89q89CsjhmfrD/ct/vJAcCFnw/dNXnC6mYjr6MDX0Gd0=
=26Uu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: cleanups, fixes
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 29 Jul 2016 04:11:01 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
mptsas: Fix a migration compatible issue
vhost: do not update last avail idx on get_vring_base() failure
vhost: add vhost_net_set_backend()
vhost-user: add error report in vhost_user_write()
tests: fix vhost-user-test leak
tests: plug some leaks in virtio-net-test
vhost-user: wait until backend init is completed
char: add and use tcp_chr_wait_connected
char: add chr_wait_connected callback
vhost: add assert() to check runtime behaviour
vhost-net: vhost_migration_done is vhost-user specific
Revert "vhost-net: do not crash if backend is not present"
vhost-user: add get_vhost_net() assertions
vhost-user: keep vhost_net after a disconnection
vhost-user: check vhost_user_{read,write}() return value
vhost-user: check qemu_chr_fe_set_msgfds() return value
vhost-user: call set_msgfds unconditionally
qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected
vhost: use error_report() instead of fprintf(stderr,...)
vhost: add missing VHOST_OPS_DEBUG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
My previous commit 2e2aa316 removed internal flag msi_in_use, which
exists in vmstate, use VMSTATE_UNUSED for migration compatibility.
Reported-by: Amit Shah <amit.shah@redhat.com>
Suggested-by: Amit Shah <amit.shah@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
The state.num value will probably be 0 in this case, but that
doesn't make sense to update.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Boot CPU is assumed to be always present in QEMU code. So
until that assumptions are gone, deny removal request.
In another words, QEMU won't support boot CPU core hot-unplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Tweaked error message for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit 5cbc64de25.
Now that we have stable cpu_index values for pseries-2.7 (and future)
machine types, we can now safely allow hotplug and unplug in any order.
Conflicts:
hw/ppc/spapr_cpu_core.c
Some conflicts on revert due to some small changes in the inserted
code since the original commit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will enshure that cpu_index for a given cpu stays the same
regardless of the order cpus has been created/deleted and so
it would be possible to migrate QEMU instance with out of order
created CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If one attempts to perform a system_reset after a failed IO request
that causes the VM to enter a paused state, QEMU will segfault trying
to free up the pending IO requests.
These requests have already been completed and freed, though, so all
we need to do is NULL them before we enter the paused state.
Existing AHCI tests verify that halted requests are still resumed
successfully after a STOP event.
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1469635201-11918-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not all vhost-user backends support ops->vhost_net_set_backend(). It is
a nicer to provide an assert/error than to crash trying to
call. Furthermore, it improves a bit the code by hiding vhost_ops
details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar to vhost_user_read() error report, it is useful to have early
error report.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these functions must be called only after the backend is connected.
They are called from virtio-net.c, after either virtio or link status
change.
The check for nc->peer->link_down should ensure vhost_net_{start,stop}()
are always called between vhost_user_{start,stop}().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Either the callback is mandatory to implement, in which case an assert()
is more appropriate, or it's not and we can't tell much whether the
function should fail or not (given it's name, I guess it should silently
success by default). Instead, make the implementation mandatory and
vhost-user specific to be more clear about its usage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that get_vhost_net() returns non-null after a successful
vhost_net_init(), we no longer need to check this case.
This reverts commit ecd34898596c60f79886061618dd7e01001113ad.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a few assertions to be more explicit about the runtime behaviour
after the previous patch: get_vhost_net() is non-null after
net_vhost_user_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many code paths assume get_vhost_net() returns non-null.
Keep VhostUserState.vhost_net after a successful vhost_net_init(),
instead of freeing it in vhost_net_cleanup().
VhostUserState.vhost_net is thus freed before after being recreated or
on final vhost_user_cleanup() and there is no need to save the acked
features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user code is quite inconsistent with error handling. Instead
of ignoring some return values of read/write and silently going on with
invalid state (invalid read for example), break the code flow when the
error happened.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check qemu_chr_fe_set_msgfds() for errors, to make sure the message to
be sent is correct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is fine to call set_msgfds() with 0 fd, and ensures any previous fd
array is cleared.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use qemu proper error reporting API, this ensures the error is
reported at the right place (stderr or monitor), with a conventional
format.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing VHOST_OPS_DEBUG() logs, for completeness.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calling a vhost operation may fail, for example with disconnected
vhost-user backend, but qemu shouldn't abort in this case.
Log an error instead, except on error and cleanup code paths where it
can be mostly ignored.
Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once
disconnected backend stabilizes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_net_init() calls vhost_dev_init() and in case of failure, calls
vhost_dev_cleanup() directly. However, the structure is already
partially cleaned on error. Calling vhost_dev_cleanup() again will call
vhost_virtqueue_cleanup() on already clean queues, and causing potential
double-close. Instead, adjust dev->nvqs and simplify vhost_dev_init()
code to not call vhost_virtqueue_cleanup() but vhost_dev_cleanup()
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init(), calling vhost backend initialization, should be
cleaned up after failure too. Call vhost_dev_cleanup() in all failure
cases. First, it needs to zero-alloc the struct to avoid the initial
garbage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is called on multiple code path, so make it safe to call several
times (note: I don't remember a reproducer here, but a function called
'cleanup' should probably be idempotent in my book)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vhost_dev_init() failed, caller may still call vhost_dev_cleanup()
later. However, vhost_dev_cleanup() tries to remove the device from the
list even if it wasn't yet added, which may lead to crashes. Similarly
for the memory listener.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure the log was released on cleanup, or it will leak (the
alternative is to call vhost_log_put() unconditionally, but it may hide
some dev state issues).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although not strictly required, it is nice to have vhost_log_put()
safely callable multiple times.
Clear dev->log* when calling vhost_log_put() to make the function
idempotent. This also simplifies a bit the caller work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-dev opaque isn't necessarily an fd, it can be a chardev when using
vhost-user. Goto fail, so vhost_backend_cleanup() is called to handle
backend cleanup appropriately.
vhost_set_backend_type() should never fail, use an assert().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio back end uses set of buffers to facilitate I/O operations.
An infinite loop unfolds in virtqueue_pop() if a buffer was
of zero size. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Enable transitional virtio devices by default.
Enable virtio-1.0 for devices plugged into
PCIe ports (Root ports or Downstream ports).
Using the virtio-1 mode will remove the limitation
of the number of devices that can be attached to a machine
by removing the need for the IO BAR.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Convert a device model where initialization obviously can't fail,
make it implement realize() rather than init().
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Firstly, convert pxb_dev_init_common() to Error and rename
it to pxb_dev_realize_common().
Actually, pxb_register_bus() is converted as well.
And then,
convert pxb_dev_initfn() and pxb_pcie_dev_initfn() to Error,
rename them to pxb_dev_realize() and pxb_pcie_dev_realize()
respectively.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In build_crs(), the calculation and merging of the ranges already happens
in 64-bit, but the entry boundaries are silently truncated to 32-bit in the
call to aml_dword_memory(). Fix it by handling the 64-bit MMIO ranges separately.
This fixes 64-bit BARs behind PXBs.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of always passing both IO and MEM ranges when
computing CRS ranges, define a new CrsRangeSet structure
that include them both.
This is done before introducing a third type of range,
64-bit MEM, so it will be easier to pass them all around.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PXBs do not support hotplug so they don't have a PCNT function.
Since the PXB's PCI root-bus is a child bus of bus 0, the
build_dsdt code will add a call to the corresponding PCNT function.
Fix this by skipping the PCNT call for the above case.
While at it skip also PCIe child buses.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prevent future issues when hotplug will work for devices
attached to pxbs.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Specify the root port interrupt pin as part of the init
process for cases when msi/msix are not enabled.
Fixes "hw/pci/pci.c:196:23: runtime error: shift exponent -1 is negative"
warning from clang's sanitizer.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We changed link status register in pci express endpoint capability
over time. Specifically,
commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.
When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.
Add compatibility flags to make this bit value match what it was under
2.3.
Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.
https://bugzilla.redhat.com/show_bug.cgi?id=1352860
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The print routine provided as part of the in-built bootloader had a bug
in that it attempted to use a jump instruction as part of a loop, but
the target has its upper bits zeroed leading to control flow
transferring to 0xb0000814 rather than the intended 0xbfc00814. Fix this
by using a branch instruction instead, which seems more fit for purpose.
A simple way to test this is to build a Linux kernel with EVA enabled &
attempt to boot it in QEMU. It will attempt to print a message
indicating the configuration mismatch but QEMU would previously
incorrectly jump & wind up printing a continuous stream of the letter E.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Highlights:
* Fixes to allow CPU hotplug/unplug in any order;
* Exit QEMU on invalid global properties.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2Abo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and machine queue, 2016-07-27
Highlights:
* Fixes to allow CPU hotplug/unplug in any order;
* Exit QEMU on invalid global properties.
# gpg: Signature made Wed 27 Jul 2016 15:28:53 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
vl: exit if a bad property value is passed to -global
qdev: ignore GlobalProperty.errp for hotplugged devices
machine: Add comment to abort path in machine_set_kernel_irqchip
Revert "pc: Enforce adding CPUs contiguously and removing them in opposite order"
pc: Init CPUState->cpu_index with index in possible_cpus[]
qdev: Fix object reference leak in case device.realize() fails
exec: Set cpu_index only if it's not been explictly set
exec: Don't use cpu_index to detect if cpu_exec_init()'s been called
exec: Reduce CONFIG_USER_ONLY ifdeffenery
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch ensures QEMU won't terminate while hotplugging a device if the
global property cannot be set and errp points to error_fatal or error_abort.
While here, it also fixes indentation of the typename argument.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're not supposed to abort when the user passes a bogus value.
Since the checking is done in visit_type_OnOffSplit(), the call
to abort() is legitimate. Let's add a comment to make it
explicit.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.
The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size. This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.
In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:
1. The driver places the buffer into free descriptor(s) in the
descriptor table, chaining as necessary
and
Note that the above code does not take precautions against the
available ring buffer wrapping around: this is not possible since the
ring buffer is the same size as the descriptor table, so step (1) will
prevent such a condition.
This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.
QEMU is missing the check to prevent this case. Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.
Exit with an error if the guest provides more requests than the
virtqueue size permits. This bounds memory allocation and makes the
buggy guest visible to the user.
This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.
Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 4da7faaeb0.
Since commit:
pc: init CPUState->cpu_index with index in possible_cpus[]
cpu_index is stable regardless of the order cpus were created
and QEMU instance stays migratable always so limitation added
by 4da7faaeb could be safely removed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reda Sallahi
Peter Maydell
Wanpeng Li
Prasad J Pandit
Li Qiang
Fam Zheng
Isaac Lozano
Dr. David Alan Gilbert
Markus Armbruster
Paolo Bonzini
Daniel P. Berrange
Rony Weng
Hervé Poussineau
Changlong Xie
Laurent Vivier
Bruce Rogers
Michael Tokarev
Gerd Hoffmann
Hans Petter Selasky
Stefan Hajnoczi
Michael S. Tsirkin
Jason Wang
Greg Kurz
Ladi Prosek
Marcel Apfelbaum
Longpeng(Mike)
Thomas Huth
Marc-André Lureau
Benjamin Herrenschmidt
Cédric Le Goater
Greg Kurz
Marcin Krzeminski
Wei Huang
David Hildenbrand
Kevin Wolf
Cornelia Huck
Christian Borntraeger
Yi Min Zhao
Juergen Gross
Cao jin
Prerna Saxena
Ilya Maximets
John Snow
chaojianhu
David Gibson
Mark Cave-Ayland
Christoph Hellwig
Peter Xu
Igor Mammedov
Bharata B Rao
Evgeny Yakovlev
Stefan Weil
Wei Jiangang
Paul Burton