Both platform and PCI vfio drivers create a "slow", I/O memory region
with one or more mmap memory regions overlayed when supported by the
device. Generalize this to a set of common helpers in the core that
pulls the region info from vfio, fills the region data, configures
slow mapping, and adds helpers for comleting the mmap, enable/disable,
and teardown. This can be immediately used by the PCI MSI-X code,
which needs to mmap around the MSI-X vector table.
This also changes VFIORegion.mem to be dynamically allocated because
otherwise we don't know how the caller has allocated VFIORegion and
therefore don't know whether to unreference it to destroy the
MemoryRegion or not.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When memory_region_ops tracepoints are enabled, calculate and record the
absolute address being accessed. Otherwise, we only get offsets into the
memory region instead of addresses.
[Fixed "offset" -> "addr" in trace event format strings.
--Stefan]
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1454976185-30095-3-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously, a single MMIO could trigger the memory_region_ops tracepoint twice:
once on its way into subpage ops, then later on its way into the model's ops.
Also, the fields previously called "addr" are actually offsets into the memory
region. Rename them to "offset" while we're editing the tracepoint definitions.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1454976185-30095-2-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also fix a typo in the virtio_balloon_handle_output() trace while here.
[The double-quoting was a limitation of the old tracetool.sh script.
The modern tracetool.py script does not require double-quotes at the end
of the line. See commit cf85cf8e97
("trace: Format strings must begin/end with double quotes").
--Stefan]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20160111173036.24764.59878.stgit@bahia.huguette.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "pnum < nb_sectors" condition in deciding whether to actually copy
data is unnecessarily strict, and the qiov initialization is
unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard.
Rewrite mirror_iteration to fix both flaws.
The output of iotests 109 is updated because we now report the offset
and len slightly differently in mirroring progress.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1454637630-10585-2-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCI spec recommends devices use additional alignment for MSI-X
data structures to allow software to map them to separate processor
pages. One advantage of doing this is that we can emulate those data
structures without a significant performance impact to the operation
of the device. Some devices fail to implement that suggestion and
assigned device performance suffers.
One such case of this is a Mellanox MT27500 series, ConnectX-3 VF,
where the MSI-X vector table and PBA are aligned on separate 4K
pages. If PBA emulation is enabled, performance suffers. It's not
clear how much value we get from PBA emulation, but the solution here
is to only lazily enable the emulated PBA when a masked MSI-X vector
fires. We then attempt to more aggresively disable the PBA memory
region any time a vector is unmasked. The expectation is then that
a typical VM will run entirely with PBA emulation disabled, and only
when used is that emulation re-enabled.
Reported-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Tested-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit c8ee0a4 introduced new events containing PRIx64 constants without
including the % prefix in the preceding string. This results in a compile
error during build if --enable-trace-backends is passed to configure.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450566522-6003-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some functions was moved from block.c to block/io.c, so the trace-events file should reflect that change.
Signed-off-by: Qinghua Jin <qhjin_dev@163.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of operating on things
that are files, such as plain files, pipes, character/block
devices, but notably not sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of I/O operations need to be performed asynchronously
to avoid blocking the main loop. The caller of such APIs need
to provide a callback to be invoked on completion/error and
need access to the error, if any. The small QIOTask provides
a simple framework for dealing with such probes. The API
docs inline provide an outline of how this is to be used.
Some functions don't have the ability to run asynchronously
(eg getaddrinfo always blocks), so to facilitate their use,
the task class provides a mechanism to run a blocking
function in a thread, while triggering the completion
callback in the main event loop thread. This easily allows
any synchronous function to be made asynchronous, albeit
at the cost of spawning a thread.
In this series, the QIOTask class will be used for things like
the TLS handshake, the websockets handshake and TCP connect()
progress.
The concept of QIOTask is inspired by the GAsyncResult
interface / GTask class in the GIO libraries. The min
version requirements on glib don't allow those to be
used from QEMU, so QIOTask provides a facsimilie which
can be easily switched to GTask in the future if the
min version is increased.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.
To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.
This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The assertion problem was noticed in 06c3916b35, but it wasn't
completely fixed, because even though the req is not marked as
serialising, it still gets serialised by wait_serialising_requests
against other serialising requests, which could lead to the same
assertion failure.
Fix it by even more explicitly skipping the serialising for this
specific case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tweak the end of migration cleanup; we don't want to close stuff down
at the end of the main stream, since the postcopy is still sending pages
on the other thread.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to servicing userfault requests we must ensure we've not got
huge pages in the area that might include non-transferred memory,
since a hugepage could incorrectly mark the whole huge page as present.
We mark the area as non-huge page (nhp) just before we perform
discards; the discard code now tells us to discard any areas
that haven't been sent (as well as any that are redirtied);
any already formed transparent-huge-pages get fragmented
by this discard process if they cotnain any discards.
Transparent huge pages that have been entirely transferred
and don't contain any discards are not broken by this mechanism;
they stay as huge pages.
By starting postcopy after a full precopy pass, many of the pages
then stay as huge pages; this is important for maintaining performance
after the end of the migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wire up more of the handlers for the commands on the destination side,
in particular loadvm_postcopy_handle_run now has enough to start the
guest running.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The loading of a device state (during postcopy) may access guest
memory that's still on the source machine and thus might need
a page fill; split off a separate thread that handles the incoming
page data so that the original incoming migration code can finish
off the device data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
userfaultfd is a Linux syscall that gives an fd that receives a stream
of notifications of accesses to pages registered with it and allows
the program to acknowledge those stalls and tell the accessing
thread to carry on.
We convert the requests from the kernel into messages back to the
source asking for the pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_in_place is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_place_page (etc) provide a way for postcopy to place a page
into guests memory atomically (using the copy ioctl on the ufd).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.
Note:
a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.
b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.
c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving MIG_RPCOMM_REQ_PAGES look up the address and
queue the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add MIG_RP_MSG_REQ_PAGES command on Return path for the postcopy
destination to request a page from the source.
Two versions exist:
MIG_RP_MSG_REQ_PAGES_ID that includes a RAMBlock name and start/len
MIG_RP_MSG_REQ_PAGES that just has start/len for use with the same
RAMBlock as a previous MIG_RP_MSG_REQ_PAGES_ID
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The end of migration in postcopy is a bit different since some of
the things normally done at the end of migration have already been
done on the transition to postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rework the migration thread to setup and start postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'MIGRATION_STATUS_POSTCOPY_ACTIVE' is entered after migrate_start_postcopy
'migration_in_postcopy' is provided for other sections to know if
they're in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and cause the parent loops to
exit as well.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Open a return path, and handle messages that are received upon it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add migrate_send_rp_message to send a message from destination to source along the return path.
(It uses a mutex to let it be called from multiple threads)
Add migrate_send_rp_shut to send a 'shut' message to indicate
the destination is finished with the RP.
Add migrate_send_rp_ack to send a 'PONG' message in response to a PING
Use it in the MSG_RP_PING handler
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-7-git-send-email-kraxel@redhat.com
These messages are disabled by default; a perfect usecase for tracepoints,
which in fact already exist. Add the missing information to them and
stop using qemu_log_mask.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The event throttling state machine is hard to understand. I'm not
sure it's entirely correct. Rewrite it in a more straightforward
manner:
State 1: No event sent recently (less than evconf->rate ns ago)
Invariant: evstate->timer is not pending, evstate->qdict is null
On event: send event, arm timer, goto state 2
State 2: Event sent recently, no additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is null
On event: store it in evstate->qdict, goto state 3
On timer: goto state 1
State 3: Event sent recently, additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is non-null
On event: store it in evstate->qdict, goto state 3
On timer: send evstate->qdict, clear evstate->qdict,
arm timer, goto state 2
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444921716-9511-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace error_report() and use tracing instead. It's not an error to get
a connection or a disconnection, so silence this and trace it instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
The malloc vtable is not supported anymore in glib, because it broke
when constructors called g_malloc. Remove tracing of g_malloc,
g_realloc and g_free calls.
Note that, for systemtap users, glib also provides tracepoints
glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc
and glib.slice_free.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add virglrenderer library detection. Add 3d mode to virtio-gpu,
wire up virglrenderer library. When in 3d mode render using the
new context management and texture scanout callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In irqfd mode, current code attempts to set a resamplefd whatever
the type of the IRQ. For an edge-sensitive IRQ this attempt fails
and as a consequence, the whole irqfd setup fails and we fall back
to the slow mode. This patch bypasses the resamplefd setting for
non level-sentive IRQs.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a start on using size_t more in qemu-file and friends;
it fixes up QEMUFilePutBufferFunc and QEMUFileGetBufferFunc
to take size_t lengths and return ssize_t return values (like read(2))
and fixes up all the different implementations of them.
Note that I've not yet followed this deeply into bdrv_ implementations.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-5-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The code that gets run at the end of the migration process
is getting large, and I'm about to add more for postcopy.
Split it into a separate function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
In some cases, we need to disable copy-on-read, and just
read the data.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-id: 1441682913-14320-2-git-send-email-wency@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Specifying an emulated PCI vendor/device ID can be useful for testing
various quirk paths, even though the behavior and functionality of
the device with bogus IDs is fully unsupportable. We need to use a
uint32_t for the vendor/device IDs, even though the registers
themselves are only 16-bit in order to be able to determine whether
the value is valid and user set.
The same support is added for subsystem vendor/device ID, though these
have the possibility of being useful and supported for more than a
testing tool. An emulated platform might want to impose their own
subsystem IDs or at least hide the physical subsystem ID. Windows
guests will often reinstall drivers due to a change in subsystem IDs,
something that VM users may want to avoid. Of course careful
attention would be required to ensure that guest drivers do not rely
on the subsystem ID as a basis for device driver quirks.
All of these options are added using the standard experimental option
prefix and should not be considered stable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is just another quirk, for reset rather than affecting memory
regions. Move it to our new quirks file.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Config windows make use of an address register and a data register.
In VGA cards, these are often used to provide real mode code in the
BIOS an easy way to access MMIO registers since the window often
resides in an I/O port register. When the MMIO register has a mirror
of PCI config space, we need to trap those accesses and redirect them
to emulated config space.
The previous version of this functionality made use of a single
MemoryRegion and single match address. This version uses separate
MemoryRegions for each of the address and data registers and allows
for multiple match addresses. This is useful for Nvidia cards which
have two ranges which index into PCI config space.
The previous implementation is left for the follow-on patch for a more
reviewable diff.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Another rework of this quirk, this time to update to the new quirk
structure. We can handle the address and data registers with
separate MemoryRegions and a quirk specific data structure, making the
code much more understandable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The Nvidia 0x3d0 quirk makes use of a two separate registers and gives
us our first chance to make use of separate memory regions for each to
simplify the code a bit.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is an easy quirk that really doesn't need a data structure if
its own. We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks. Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup. There's no need to typedef the blacklist structure,
it's a static private data type used once. The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match). Our
test loop is also crying out to be simplified as a for loop.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows vfio_msi* tracing. The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path. A few cycles to read the message is hardly anything if we're
already in QEMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table. There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6TWk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging
Merge vnc-crypto-v9
# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
ui: convert VNC server to use QCryptoTLSSession
ui: fix return type for VNC I/O functions to be ssize_t
crypto: introduce new module for handling TLS sessions
crypto: add sanity checking of TLS x509 credentials
crypto: introduce new module for TLS x509 credentials
crypto: introduce new module for TLS anonymous credentials
crypto: introduce new base module for TLS credentials
qom: allow QOM to be linked into tools binaries
crypto: move crypto objects out of libqemuutil.la
tests: remove repetition in unit test object deps
qapi: allow override of default enum prefix naming
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7+ii
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20
The slot and function values are in reverse order.
Stick with the conventional BDF notation.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s390 guest initialization is modified to make use of new s390-storage-keys
device. Old code that globally allocated storage key array is removed.
The new device enables storage key access for kvm guests.
Cache storage key QOM objects in frequently used helper functions to avoid a
performance hit every time we use one of these functions.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If mirror has more free buffers than IOV_MAX, preadv(2)/pwritev(2)
EINVAL failures may be encountered.
It is possible to trigger this by setting granularity to a low value
like 8192.
This patch stops appending chunks once IOV_MAX is reached.
The spurious EINVAL failure can be reproduced with a qcow2 image file
and the following QMP invocation:
qmp.command('drive-mirror', device='virtio0', target='/tmp/r7.s1',
granularity=8192, sync='full', mode='absolute-paths',
format='raw')
While the guest is running dd if=/dev/zero of=/var/tmp/foo oflag=direct
bs=4k.
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435761950-26714-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Drop .can_receive and move the semantics into minimac2_rx, by returning
0.
That is once minimac2_rx returns 0, incoming packets will be queued
until the queue is explicitly flushed. We do this when s->regs[R_STATE0]
or s->regs[R_STATE1] is changed in minimac2_write.
Also drop the unused trace point.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To make sections optional, we need to do it at the beggining of the code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.
Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).
Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
a) The caller passes the offset and rdma_delete_block looks it up
in the hash; fixed by getting the caller to pass the block
b) The hash gets recreated after deletion; fixed by making that
conditional on the hash being initialised.
While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
a) Pass a 'data' parameter to use for the name in the block-reg
case
b) Only some hook types now require the presence of a hook function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a later patch the block name will be used to match up two views
of the block list. Keep a copy of the block name with the local block
list.
(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJVeppzAAoJEFIRjjwLKdprnk8H/1owSOreh0sMFbosvqlEhjXl
lvjjuprWMdX+8M1JlaDvTbw6+LDB3Rihp3A6/I9A0GFiZaORmPzg7efULAI1H6ST
0HfxMAO17eW+PJ3lvk0HidNDr01+RzTvwpizrHgQ9WJubJv0xREU+YG5yn1gPS4N
aMMTKCAQFDba7iQQLKXUYvLz76+xyzW4VIvHVLx/SU86yPg9T7CwLpppipR8+zY5
3BC4NUw/xLlS0LCYQGM8XmYgBiQ6lEAz/Y29bGlUg+LeYysjSgNSeoNbOs1M3kQp
X0Hn7b28I1CjM2wZQ9GkT/ig+jhMvw27motnAe8vKood4ytfcor+dCCS13sE8fg=
=F564
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150612' into staging
MIPS patches 2015-06-12
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20150612: (29 commits)
target-mips: enable XPA and LPA features
target-mips: remove misleading comments in translate_init.c
target-mips: add MTHC0 and MFHC0 instructions
target-mips: add CP0.PageGrain.ELPA support
target-mips: support Page Frame Number Extension field
target-mips: extend selected CP0 registers to 64-bits in MIPS32
target-mips: correct MFC0 for CP0.EntryLo in MIPS64
net/dp8393x: fix hardware reset
net/dp8393x: correctly reset in_use field
net/dp8393x: add load/save support
net/dp8393x: add PROM to store MAC address
net/dp8393x: QOM'ify
net/dp8393x: use dp8393x_ prefix for all functions
net/dp8393x: do not use old_mmio accesses
net/dp8393x: always calculate proper checksums
dma/rc4030: convert to QOM
dma/rc4030: use trace events instead of custom logging
dma/rc4030: document register at offset 0x210
dma/rc4030: do not use old_mmio accesses
dma/rc4030: use AddressSpace and address_space_rw in users
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds the core code for virtio gpu emulation,
covering 2d support.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Exit with an error (instead of simply logging a trace event)
whenever the same fw_cfg file name is added multiple times via
one of the fw_cfg_add_file[_callback]() host-side API calls.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From this point forward, any guest-side writes to the fw_cfg
data register will be treated as no-ops. This patch also removes
the unused host-side API function fw_cfg_add_callback(), which
allowed the registration of a callback to be executed each time
the guest completed a full overwrite of a given fw_cfg data item.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Minimal VFIO platform implementation supporting register space
user mapping but not IRQ assignment.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is to reduce VIO noise while debugging PCI DMA.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When memory hot unplug fails, this patch adds support to send
QMP event to notify mgmt about this failure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* remotes/qmp-unstable/queue/qmp:
docs: add memory-hotplug.txt
qemu-options.hx: improve -m description
virtio-balloon: Add some trace events
virtio-balloon: Fix balloon not working correctly when hotplug memory
pc-dimm: add a function to calculate VM's current RAM size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It looks like the dtrace trace code gets upset if you have trace names
with __ in, which the migration/rdma.c code does.
Rename the functions and the associated traces.
Fixes: 733252deb8
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1424105885-12149-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add trace calls. Convert some #ifdef DEBUG printfs to trace.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
this patch finally introduces multiread support to virtio-blk. While
multiwrite support was there for a long time, read support was missing.
The complete merge logic is moved into virtio-blk.c which has
been the only user of request merging ever since. This is required
to be able to merge chunks of requests and immediately invoke callbacks
for those requests. Secondly, this is required to switch to
direct invocation of coroutines which is planned at a later stage.
The following benchmarks show the performance of running fio with
4 worker threads on a local ram disk. The numbers show the average
of 10 test runs after 1 run as warmup phase.
| 4k | 64k | 4k
MB/s | rd seq | rd rand | rd seq | rd rand | wr seq | wr rand
--------------+--------+---------+--------+---------+--------+--------
master | 1221 | 1187 | 4178 | 4114 | 1745 | 1213
multiread | 1829 | 1189 | 4639 | 4110 | 1894 | 1216
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Turn all the D/DD/DDDPRINTFs into trace events
Turn most of the fprintf(stderr, into error_report
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUx465AAoJECgfDbjSjVRpzewIAI/tzV1oCR1D/YDYBYpiK68W
85JJbyR90DpS9unjrkeUHEnJgkegCk8dMXlWJOlshpwxDw2khC2ol0yS6siwC6Z/
1peL9E5zHz2H8KWfH6JlhqLETovZxjd5Uv3q1mWULvK+zZcPzeQDCky5I8mbEw4b
0LGDGX8mcLlDnit9mnAbgHu7cbqGa0jtXoJTFveKdxQtHdyj4cAg0wCjOLhnEo6s
fJP7K1TJ2Ptiwwlk2cnj8T4Z9AoJkWjpFfr94dST2KqR3z5j8OUZYYhifrZa3e8t
qxO/UatY4IwSnsmWCn/hvzlHZFa03sc9nPIkAlj96j78sHqPafDJxCdnwlX8pF8=
=Kfwr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc-dimm: Add Error argument to pc_existing_dimms_capacity
pc-dimm: Make pc_existing_dimms_capacity global
pc: Fix DIMMs capacity calculation
smbios: Don't report unknown CPU speed (fix SVVP regression)
smbios: Fix dimm size calculation when RAM is multiple of 16GB
bios-linker-loader: move source to common location
bios-linker-loader: move header to common location
virtio: fix feature bit checks
bios-tables-test: split piix4 and q35 tests
acpi: build_append_nameseg(): add padding if necessary
acpi: update generated hex files
acpi-test: update expected DSDT
pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
pci: Split pcie_host_mmcfg_map()
Add some trace calls to pci.c.
ich9: add disable_s3, disable_s4, s4_val properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ioreq-server API added to Xen 4.5 offers better security than
the existing Xen/QEMU interface because the shared pages that are
used to pass emulation request/results back and forth are removed
from the guest's memory space before any requests are serviced.
This prevents the guest from mapping these pages (they are in a
well known location) and attempting to attack QEMU by synthesizing
its own request structures. Hence, this patch modifies configure
to detect whether the API is available, and adds the necessary
code to use the API if it is.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
A new common module is created. It implements all functions
that have no device specificity (PCI, Platform).
This patch only consists in move (no functional changes)
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_get_device now takes a VFIODevice as argument. The function is split
into 2 parts: vfio_get_device which is generic and vfio_populate_device
which is bus specific.
3 new fields are introduced in VFIODevice to store dev_info.
vfio_put_base_device is created.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This structure is going to be shared by VFIOPCIDevice and
VFIOPlatformDevice. VFIOBAR includes it.
vfio_eoi becomes an ops of VFIODevice specialized by parent device.
This makes possible to transform vfio_bar_write/read into generic
vfio_region_write/read that will be used by VFIOPlatformDevice too.
vfio_mmap_bar becomes vfio_map_region
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch removes all DPRINTF and replace them by trace points.
A few DPRINTF used in error cases were transformed into error_report.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
MSI-X works slightly different than INTx; the doorbell
registers are not necessarily used as MSI-X interrupts
are directed anyway. So the head pointer on the
reply queue needs to be updated as soon as a frame
is completed, and we can set the doorbell only
when in INTx mode.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows requires the frames to be unmapped, otherwise we run
into a race condition where the updated frame data is not
visible to the guest.
With that we can simplify the queue algorithm and use a bitmap
for tracking free frames.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve queue logging by displaying head and tail pointer
of the completion queue.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows driver is sending several init_firmware commands
when in MSI-X mode. It is, however, using only the first
queue. So disregard any additional init_firmware commands
until the HBA is reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The EFI firmware doesn't handle unit attentions properly,
so we need to clear the Power On/Reset unit attention upon
initial reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease debugging we should be decoding
the register names.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The trace events already contain the function name, so the actual
message doesn't need to contain any of these informations.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.
The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).
Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).
A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nP/e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.
This splits long tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few files have been renamed without updating their comment here. A
few events have been added in the wrong place. Clean that up.
Comments with no space after the '#' look ugly and confuse
cleanup-trace-events.pl. Insert a space.
scripts/cleanup-trace-events.pl is now happy again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Event monitor_protocol_event is unused since commit 7517517. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Event megasas_io_read was added in commit e8f943c, but never used.
Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iscsi_aio_write16_cb, iscsi_aio_writev, iscsi_aio_read16_cb, and
iscsi_aio_readv have not not been in use since commit
063c3378a9 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}").
These were the only trace events in block/iscsi.c so drop the the
trace.h include.
Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-4-git-send-email-stefanha@redhat.com
This trace event was added in commit
840a178c94 ("usb: mtp filesharing") but
never used.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-3-git-send-email-stefanha@redhat.com
This trace event has not been in use since commit
b002254dbd ("virtio-blk: Unify
{non-,}dataplane's request handlings").
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-2-git-send-email-stefanha@redhat.com
This converts many kinds of debug prints to traces.
This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.
This makes OHCI errors (such as "DMA error") invisible by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Convert into trace event. Otherwise the message
dma: unregistered DMA channel used nchan=0 dma_pos=0 dma_len=1
gets printed every time and fills up the log-file with 50 MiB / minute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this patch the qemu console core stops using PixelFormat and pixman
format codes side-by-side, pixman format code is the primary way to
specify the DisplaySurface format:
* DisplaySurface stops carrying a PixelFormat field.
* qemu_create_displaysurface_from() expects a pixman format now.
Functions to convert PixelFormat to pixman_format_code_t (and back)
exist for those who still use PixelFormat. As PixelFormat allows
easy access to masks and shifts it will probably continue to exist.
[ xenfb added by Benjamin Herrenschmidt ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add some trace events to virtio-rng for easier debugging
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a couple of tcg specific trace-events which are useful for
tracing execution though tcg generated blocks. It's been tested with
lttng user space tracing but is generic enough for all systems. The tcg
events are:
* translate_block - when a subject block is translated
* exec_tb - when a translated block is entered
* exec_tb_exit - when we exit the translated code
* exec_tb_nocache - special case translations
Of course we can only trace the entrance to the first block of a chain
as each block will jump directly to the next when it can. See the -d
nochain patch to allow more complete tracing at the expense of
performance.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.
The root cause may be not in QEMU mostly. However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.
Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.
When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.
if (qemu_powerdown_requested())
qemu_system_powerdown()
monitor_protocol_event(QEVENT_POWERDOWN, NULL)
OR
if(qemu_shutdown_requested()}
monitor_protocol_event(QEVENT_SHUTDOWN, NULL);
The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.
Signed-off-by: Yang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add mhp_pc_dimm_assigned_slot & mhp_pc_dimm_assigned_address
events to trace which address and slot where assigned to
plugged in PC_DIMM device on target-i386 machine.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add events for tracing accesses to memory hotplug IO ports.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.
This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.
This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.
At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.
The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.
If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.
This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.
This implements stub which returns very basic tree (root node,
no properties) to the guest.
As the return buffer does not contain any change, no change in behavior is
expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Exploit the new api for userspace-controlled cmma. If supported, enable
cmma during kvm initialization and register a reset handler for cmma,
which is also called directly from the load IPL code.
The reset functionality is needed to reset the cmma state of the guest
pages, e.g. if a system reset is triggered via qemu monitor; otherwise
this could result in data corruption.
A guest triggered reboot may now lead to multiple cmma resets; this is
OK, however, as this is slowpath anyway and the simplest way to achieve
the intended effects.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
* remotes/bonzini/scsi-next:
[PATCH] block/iscsi: bump year in copyright notice
block/iscsi: allow cluster_size of 4K and greater
block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
block/iscsi: speed up read for unallocated sectors
block/iscsi: allow fall back to WRITE SAME without UNMAP
MAINTAINERS: mark megasas as maintained
megasas: Add MSI support
megasas: Enable MSI-X support
megasas: Implement LD_LIST_QUERY
scsi: Improve error messages more
scsi-disk: Improve error messager if can't get version number
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nasty 0xe0 logic is gone. We map through QKeyCode now, giving us a
nice, readable mapping table.
Quick smoke test in OpenFirmware looks ok. Careful check from arch
maintainers would be very nice, especially on the capslock and numlock
logic. I'm not fully sure whenever I got it translated correctly and
also what it is supposed to do in the first place ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
s390x introduced helper functions for getting/setting one_regs with
commit 860643bc. However, nothing about these is s390-specific.
Alexey Kardashevskiy had already posted a general version, so let's
merge the two patches and massage the code a bit.
CC: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some hardware instances do support MSI, so we should do likewise.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer firmware implement a LD_LIST_QUERY command, and due to a driver
issue no drives might be detected if this command isn't supported.
So add emulation for this command, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some ONE_REGS on s390 are not protected by a capability. Older kernels
might not provide those and return an error. Fortunately these registers
are only critical for the migration path. There is no need to error out
on reset and normal runtime. Furthermore, these kernels don't provide
a proper dirty bitmap anyway, so let's use tracing for those errors.
Also provide generic one reg helper to simplify the code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Implementation of a USB Media Transfer Device device for easy
filesharing. Read-only. No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This replaces DPRINTF macro with tracepoints.
This moves some messages from migration.c to savevm.c.
This adds tracepoint to signal about fileds failed to migrate.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The throttling delay calculation was using an inaccurate sector count to
calculate the time to sleep. This broke rate-limiting for the block
mirror job.
Move the delay calculation into mirror_iteration() where we know how
many sectors were transferred. This lets us calculate an accurate delay
time.
Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It might be useful for tracing migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch introduces the hypervisor call H_GET_TCE which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).
The hcall H_GET_TCE is required by the kdump kernel which is calling it to
retrieve the TCE set up by the panicing kernel.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PR KVM lacks support of many SPRs in set/get one register API but it does
really break PR KVM. So convert them to switchable traces for now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
