Commit Graph

38 Commits

Author SHA1 Message Date
Julia Suvorova 19790847e2 hw/char: Implement nRF51 SoC UART
Not implemented: CTS/NCTS, PSEL*.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-02 14:03:33 +00:00
Hans-Erik Floryd 3c54cf7705 imx_serial: Generate interrupt on receive data ready if enabled
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.

Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:31 +01:00
Peter Maydell def337ffda serial-isa: Use MAX_ISA_SERIAL_PORTS instead of MAX_SERIAL_PORTS
The ISA serial port handling in serial-isa.c imposes a limit
of 4 serial ports. This is because we only know of 4 IO port
and IRQ settings for them, and is unrelated to the generic
MAX_SERIAL_PORTS limit, though they happen to both be set at
4 currently.

Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct
limit to be checking against.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-11-peter.maydell@linaro.org
2018-04-26 13:57:00 +01:00
Trent Piepho 478a573a7d i.MX: Support serial RS-232 break properly
Linux does not detect a break from this IMX serial driver as a magic
sysrq.  Nor does it note a break in the port error counts.

The former is because the Linux driver uses the BRCD bit in the USR2
register to trigger the RS-232 break handler in the kernel, which is
where sysrq hooks in.  The emulated UART was not setting this status
bit.

The latter is because the Linux driver expects, in addition to the BRK
bit, that the ERR bit is set when a break is read in the FIFO.  A break
should also count as a frame error, so add that bit too.

Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180320013657.25038-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23 18:26:45 +00:00
Andrey Smirnov 46d3fb634c char: i.MX: Add support for "TX complete" interrupt
Add support for "TX complete"/TXDC interrupt generate by real HW since
it is needed to support guests other than Linux.

Based on the patch by Bill Paul as found here:
https://bugs.launchpad.net/qemu/+bug/1753314

Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-19 18:23:24 +00:00
Philippe Mathieu-Daudé bb3d5ea858 hw/isa: Move parallel_hds_isa_init() to hw/char/parallel-isa.c
Again... (after 07dc788054 and 9157eee1b1).

We now extract the ISA bus specific helpers.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-2-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12 16:12:47 +01:00
Richard Braun f6bfe45af2 hw/char/stm32f2xx_usart: fix TXE/TC bit handling
I/O currently being synchronous, there is no reason to ever clear the
SR_TXE bit. However the SR_TC bit may be cleared by software writing
to the SR register, so set it on each write.

In addition, fix the reset value of the USART status register.

Signed-off-by: Richard Braun <rbraun@sceen.net>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
[PMM: removed XXX tag from comment, since it isn't something
 we need to come back and fix in QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:51 +00:00
Laurent Vivier 2cc75c32e6 hw/char: remove legacy interface escc_init()
Move necessary stuff in escc.h and update type names.
Remove slavio_serial_ms_kbd_init().
Fix code style problems reported by checkpatch.pl
Update mac_newworld, mac_oldworld and sun4m to use directly the
QDEV interface.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-16 12:14:26 +11:00
Peter Maydell 775df84e48 hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
Implement a model of the simple "APB UART" provided in
the Cortex-M System Design Kit (CMSDK).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17 13:36:08 +01:00
Marc-André Lureau 4d43a603c7 char: move CharBackend handling in char-fe unit
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.

Make qemu_chr_replay() a macro shared by both char and char-fe.

Export qemu_chr_write(), and use a macro for qemu_chr_write_all()

(nb: yes, CharBackend is for char frontend :)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:53 +04:00
Marc-André Lureau 8228e353d8 chardev: move headers to include/chardev
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Marc-André Lureau 0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Marc-André Lureau 5345fdb446 char: use qemu_chr_fe* functions with CharBackend argument
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau becdfa00cf char: replace PROP_CHR with CharBackend
Store the property in a CharBackend instead of CharDriverState*.  This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau 4496dc49ec sun4uv: fix serial initialization regression
Since commit b6607a1a20, serial_hds_isa_init() was introduced to
factor out serial_isa_init() loops. However, sun4uv shouldn't start from
0 when there is a mm serial on 0 already. Add a "from" argument to
serial_hds_isa_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Markus Armbruster 175de52487 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Paolo Bonzini a1df76da57 serial: remove watch on reset
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.

Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Paolo Bonzini 807464d8a7 serial: make tsr_retry unsigned
It can never become negative; reflect this in the type of the field
and simplify the conditions.

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
xiaoqiang zhao 1b6d0781c2 hw/char: QOM'ify xilinx_uartlite model
* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
  xilinx_uartlite device
* change affected board code to use the new way

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:32 +01:00
xiaoqiang zhao 4be12ea09a hw/char: QOM'ify cadence_uart model
* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
  cadence_uart_device
* change affected board code to use the new way

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:31 +01:00
xiaoqiang zhao f0d1d2c115 hw/char: QOM'ify pl011 model
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:31 +01:00
Markus Armbruster 14b6d44d47 Use scripts/clean-includes to drop redundant qemu/typedefs.h
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates.  Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c.  No idea
how that escaped the previous runs.

Some manual whitespace trimming around dropped includes squashed in.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:16 +01:00
Andrew Baumann 97398d900c bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block
At present only the core UART functions (data path for tx/rx) are
implemented, which is enough for UEFI to boot. The following
features/registers are unimplemented:
  * Line/modem control
  * Scratch register
  * Extra control
  * Baudrate
  * SPI interfaces

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois cd0bda2087 i.MX: Split UART emulator in a header file and a source file
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a51ef50fa222a614169056d5389a6d3ed6a63b04.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:19 +01:00
Peter Crosthwaite 8ae57b2fa3 char: cadence_uart: Split state struct and type into header
Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 46a0fbd45b6b205f54c4a8c778deb75c77f8abdf.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 16:41:12 +01:00
Alistair Francis 73af5d1115 stm32f2xx_USART: Add the stm32f2xx USART Controller
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Markus Armbruster b6607a1a20 serial: Factor out common serial_hds_isa_init()
It's the same old loop copied five times, plus another instance where
it's clipped to two iterations and unrolled.

No external users of serial_isa_init() are left, so give it internal
linkage.

Maintainers of affected machines cc'ed.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24 00:19:06 +01:00
Antony Pavlov 142593c9d7 hw/arm/digic: add UART support
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-5-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Stefan Weil 1246b259f8 misc: Replace 'struct QEMUTimer' by 'QEMUTimer'
Most code already used QEMUTimer without the redundant 'struct' keyword.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02 21:03:39 +04:00
Andreas Färber a0b97927e3 lm32_juart: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:28 +02:00
Andreas Färber 0ee10242fd lm32_juart: Relocate and tidy header
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:27 +02:00
Andreas Färber 81069b2054 escc: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:27 +02:00
Blue Swirl 371a775dc1 Merge branch 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
  qdev: Drop FROM_QBUS() macro
  isa: QOM'ify ISADevice
  isa: QOM'ify ISABus
  i8259: Convert PICCommonState to use QOM realizefn
  kvm/i8259: QOM'ify some more
  i8259: QOM'ify some more
  i8254: Convert PITCommonState to QOM realizefn
  kvm/i8254: QOM'ify some more
  i8254: QOM'ify some more
  isa: Use realizefn for ISADevice
  cs4231a: QOM'ify some more
  gus: QOM'ify some more
2013-06-15 10:53:44 +00:00
Peter Crosthwaite 8e8638fa87 char/serial: Use generic Fifo8
Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-11 23:45:44 +04:00
Andreas Färber db895a1e6a isa: Use realizefn for ISADevice
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07 12:14:45 +02:00
Andreas Färber eeceb0849d serial: QOM'ify ISA serial
Introduce type constant and cast macro to obsolete DO_UPCAST().

Prepares for ISA realizefn.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-16-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 08:27:49 -05:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00