Commit Graph

1477 Commits

Author SHA1 Message Date
Stefan Weil 0211b5cf2d target-ppc: Fix compiler warning
gcc reports a warning which is usually wrong:

target-ppc/dfp_helper.c: In function ‘dfp_get_digit’:
target-ppc/dfp_helper.c:417:1: warning:
 control reaches end of non-void function [-Wreturn-type]

The compiler shows the warning if assert is not marked with the noreturn
attribute or if the code is compiled with -DNDEBUG.

Using g_assert_not_reached better documents the intention and does not
have these problems.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-24 20:01:24 +04:00
Alexander Graf d13fc32ecf PPC: KVM: Make pv hcall endian agnostic
There were a few revisions of the Linux kernel that incorrectly swapped
the hcall instructions when they saw ePAPR compliant hypercalls.

We already have fixups for those in place when running with PR KVM, but
HV KVM and systems that don't implement hypercalls at all are still broken
because they fall back to the QEMU implementation of fallback hypercalls.

So let's make the fallback hypercall instruction path endian agnostic. This
only really works well for 64bit guests, but I don't think there are any 32bit
systems left that don't implement real pv hcall support, so we'll never get
into this code path.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:46 +02:00
Tristan Gingold e223bcad6e powerpc: use float64 for frsqrte
Remove the code that reduce the result to float32 as the frsqrte
instruction is defined to return a double-precision estimate of
the reciprocal square root.

Although reducing the fractional part is harmless (as the estimation
must have at least 12 bits of precision according to the old PEM),
reducing the exponent range is not correct.

Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:46 +02:00
Alexey Kardashevskiy d5ac4f5433 spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.

This defines AIL flags for LPCR special register.

This changes @excp_prefix according to the mode, takes effect in TCG.

This turns support of a new capability PPC2_ISA207S flag for TCG.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy cd9adfdd77 target-ppc: Enable DABRX SPR and limit it to <=POWER7
This adds DABRX SPR.

As DABR(X) are present in POWER CPUs till POWER7 only and POWER8 does not
have them (as it implements more powerful facility instead), this limits
DABR/DABRX registration by POWER7 (inclusive).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy 7303f83db6 target-ppc: Enable PPR and VRSAVE SPRs migration
This hooks SPR with their "KVM set_one_reg" counterparts which enables
their migration.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy 4ee4a03b38 target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
POWER8 supports Event-Based Branch Facility (EBB). It is controlled via
set of SPRs access to which should generate an "Facility Unavailable"
interrupt if the facilities are not enabled in FSCR for problem state.

This adds EBB SPRs.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy 80b3f79b99 KVM: target-ppc: Enable TM state migration
This adds migration support for registers saved before Transactional
Memory (TM) transaction started.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy cdcdda27fc target-ppc: Add POWER8's TM SPRs
This adds TM (Transactional Memory) SPRs.

This adds generic spr_read_prev_upper32()/spr_write_prev_upper32() to
handle upper half SPRs such as TEXASRU which is upper half of TEXASR.
Since this is not the only register like that and their numbers go
consequently, it makes sense to generalize the helpers.

This adds a gen_msr_facility_check() helper which purpose is to generate
the Facility Unavailable exception if the facility is disabled.
It is a copy of gen_fscr_facility_check() but it checks for enabled
facility in MSR rather than FSCR/HFSCR. It still sets the interrupt cause
in FSCR/HFSCR (whichever is passed to the helper).

This adds spr_read_tm/spr_write_tm/spr_read_tm_upper32/spr_write_tm_upper32
which are used for TM SPRs.

This adds TM-relates MSR bits definitions. This enables TM in POWER8 CPU class'
msr_mask.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Alexey Kardashevskiy 70c5340744 target-ppc: Add POWER8's MMCR2/MMCRS SPRs
This adds POWER8 specific PMU MMCR2/MMCRS SPRs.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 45ed0be146 target-ppc: Enable FSCR facility check for TAR
This makes user-privileged read/write fail if TAR facility is not enabled
in FSCR.

Since this is the very first check for enabled in FSCR facility,
this also adds gen_fscr_facility_check() for using in spr_write_tar()/
spr_read_tar().

This enables TAR in FSCR for user mode unconditionally.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 7019cb3d88 target-ppc: Add POWER8's FSCR SPR
This adds an FSCR (Facility Status and Control Register) SPR. This defines
names for FSCR bits.

This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU).
This registers an interrupt vector for it at 0xF60 as PowerISA defines.

This adds a TCG helper_fscr_facility_check() helper to raise an exception
if the facility is not enabled. It updates the interrupt cause field
in FSCR. This adds a TCG translation block generation code. The helper
may be used for HFSCR too as it has the same format.

The helper raising FU exceptions is not used by this patch but will be
in the next ones.

This adds gen_update_current_nip() to update NIP in DisasContext.
This helper is not used now and will be called before checking for
a condition for throwing an FU exception.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy d1a721ab81 target-ppc: Add POWER8's TIR SPR
This adds TIR (Thread Identification Register) SPR first defined for server
CPUs in PowerISA 2.07.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy a242881405 target-ppc: Refactor class init for POWER7/8
This extends init_proc_book3s_64 to support POWER7 and POWER8.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 5881c296b9 target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
This replaces gen_spr_7xx() call (which registers 32bit SPRs) with
gen_spr_book3s_pmu() call.

This removes SPR_7XX_PMC5/6 as they are for 32bit and gen_spr_book3s_pmu()
already registers correct PMC5/6 SPRs.

This removes explicit MMCRA registration as gen_spr_book3s_pmu() does it
anyway.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 7fc2db18ce target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
This makes use of generic gen_spr_power5p_lpar() which registers LPCR SPR.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 6a1eed3f49 target-ppc: Make use of gen_spr_book3s_altivec() for POWER7/8
This replaces VRSAVE registration and vscr_init() call with
gen_spr_book3s_altivec() which is generic and does the same thing if
insns_flags has PPC_ALTIVEC bit set (which POWER7/8 have set).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:44 +02:00
Alexey Kardashevskiy 5db7d4faa3 target-ppc: Move POWER7/8 CFAR/DSCR/CTRL/PPR/PCR SPR registration to helpers
This moves SCFAR/DSCR/CTRL/PPR/PCR PRs to helpers. Later these helpers
will be called from generalized init_proc_book3s_64().

This switches init_proc_POWER7() to use generalized gen_spr_book3s_common()
which registers CRTL SPR under slightly different names. No change in
behaviour or non-debug output is expected.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy 768167abb9 target-ppc: Move POWER8 TCE Address control (TAR) to a helper
This moves TAR SPR to a helper. Later this helper will be
called from generalized init_proc_book3s_64().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy e61716aa9a target-ppc: Move POWER7/8 PIR/PURR/SPURR SPR registration to helpers
This moves PIR/PURR/SPURR SPRs to helpers. Later these helpers will be
called from generalized init_proc_book3s_64().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy 83cc6f8c2f target-ppc: Enable PMU SPRs migration
This enabled PMU SPRs migration by hooking hypv privileged versions with
"KVM one reg" IDs.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy 90618f4f4d target-ppc: Remove check_pow_970FX
After merging 970s into one class, check_pow_970() is used for all of them.
Since POWER5+ is no different in the matter of supported power modes,
let's use the same check_pow() callback for POWER5+ too,

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy 7488d481ce target-ppc: Introduce and reuse generalized init_proc_book3s_64()
At the moment every POWER CPU family has its own init_proc_POWERX function.
E500 already has common init function so we try to do the same thing.

This introduces BOOK3S_CPU_TYPE enum with 2 values - 970 and POWER5+.

This introduces generalized init_proc_book3s_64() which accepts a CPU type
as a parameter.

This uses new init function for 970 and POWER5+ CPU classes.

970 and POWER5+ use the same CPU class initialization except 3 things:
1. logical partitioning is controlled by LPCR (POWER5+) and HID4 (970)
SPRs;
2. 970 does not have EAR (External Access Register) SPR and PowerISA 2.03
defines one so keep it only for POWER5+;
3. POWER5+ does not have ALTIVEC so insns_flags does not have PPC_ALTIVEC
flag set and gen_spr_book3s_altivec() won't init ALTIVEC for POWER5+.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy ba88100219 target-ppc: Add HID4 SPR for PPC970
Previously LPCR was registered for the 970 class which was wrong as
it does not have LPCR. Instead, HID4 is used which this patch registers.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy c36c97f880 target-ppc: Add PMC7/8 to 970 class
Compared to PowerISA-compliant CPUs, 970 family has most of them plus
PMC7/8 which are only present on 970 but not on POWER5 and later CPUs.

Since we are changing SPRs for Book3s/970 families, let's add them too.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:43 +02:00
Alexey Kardashevskiy 077850b037 target-ppc: Add PMC5/6, SDAR and MMCRA to 970 family
MMCR0, MMCR1, MMCRA, PMC1..6, SIAR, SDAR are defined for 970 and PowerISA
CPUs. Since we are building common infrastructure for SPRs intialization
to share it between 970 and POWER5+/7/..., let's add missing SPRs to
the 970 family. Later rework of CPU class initialization will use those
for all PowerISA CPUs.

This adds new SPRs and enables writing to Uxxxx SPRs from supermode.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy 75b9c321f4 target-ppc: Add "POWER" prefix to MMCRA PMU registers
Since we started adding "POWER" prefix to 64bit PMU SPRs, let's finish
the transition and fix MMCRA and define a supermode version of it.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy fd51ff6328 target-ppc: Copy and split gen_spr_7xx() for 970
This stops using 7xx common SPRs init function and adds separate set
of helpers for 970.

This does not copy ICTC SPR as neither 970 manual nor PowerISA mention it.

This defines 970/book3s PMU SPRs constants as they differs from the ones
used for 7XX.

This creates 2 helpers for PMU SPRs, one for supermode privileged SPRs and
one for user privileged SPRs as "sup" versions can be shared across
the family while "user" versions will behave different starting POWER8
(which will be addressed later).

This allows writing to Uxxxx SPRs from supermode. spr_write_ureg() is
implemented for this as a copy of already existing spr_read_ureg().

This allows writing to supervisor's SIAR - it used to be disabled
when gen_spr_7xx() was used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy eb16dd9cc9 target-ppc: Make UCTRL a mirror of CTRL
This changes UCTRL SPR to read from its supermode copy.

This enables reading from UCTRL in user mode.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy 42382f6244 target-ppc: Refactor PPC970
This splits one init_proc_970() into a set of small helpers. Later
init_proc_970() will be generalized and will call different set of helpers
depending on the current CPU class.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy bbc01ca7f2 target-ppc: Merge 970FX and 970MP into a single 970 class
The differences between classes were:
1. SLB size, was 32 for 970 and 64 for others, should be 64 for all;
2. check_pow() callback, HID0 format is the same so should be the same
0x01C00000 which means "deep nap", "doze" and "nap" bits set;
3. LPCR - 970 does not have it but 970MP had one (by mistake).

This fixes wrong differences and makes one 970 class.

This fixes wrong registration of LPCR which is not present on 970.

This defines HID0 bits and uses them in check_pow_970().

This does not copy MSR_SHV (Hypervisor State, HV) bit from 970FX to
970 class as we do not emulate hypervisor in QEMU anyway.

This does not remove check_pow_970FX now as it is still used by POWER5+
class, this will be addressed later.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexey Kardashevskiy cb8b8bf840 target-ppc: Rename 7XX/60x/74XX/e600 PMU SPRs
As defined in Linux kernel, PMC*, SIAR, MMCR0/1 have different numbers
for 32 and 64 bit POWERPC. We are going to support 64bit versions too so
let's rename 32bit ones to avoid confusion.

This is a mechanical patch so it does not fix obvious mistake with these
registers in POWER7 yet, this will be fixed later.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Tom Musta a9e8f4e7df target-ppc: Fix Temporary Variable Leak in bctar
Fix a temporary variable leak detected in the bctar instruction:

   Opcode 13 10 11 (4d910460) leaked temporaries

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:42 +02:00
Alexander Graf 13b6a45565 PPC: e500: Merge 32 and 64 bit SPE emulation
Today we have a lot of conditional code in the SPE emulation depending on
whether we have 64bit GPRs or not.

Unfortunately the assumption that we can just recycle the 64bit GPR
implementation is wrong. Normal SPE implementations maintain the upper 32 bits
on all non-SPE instructions which then only modify the low 32 bits. However
all instructions we model that adhere to the normal SF based switching don't
care whether they operate on 32 or 64 bit registers and just always use the full
64 bits.

So let's remove that dubious SPE optimization and revert everything to the same
code path the 32bit target code was taking. That way we get rid of differences
between the two implementations, but will get a slight performance hit when
emulating SPE instructions.

This fixes SPE emulation with qemu-system-ppc64 for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:41 +02:00
Alexander Graf 87a91de61a KVM: PPC: Expose fixup hcall capability
New kvm versions expose a PPC_FIXUP_HCALL capability. Make it visible to
machine code so we can take decisions based on it.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:41 +02:00
Alexander Graf ada82b537e PPC: SPE: Fix high-bits bitmask
The SPE emulation code wants to access the highest 32bits of a 64bit register
and uses the andi TCG instruction for that. Unfortunately it masked with the
wrong mask. Fix the mask to actually cover the upper 32 bits.

This fixes simple multiplication tests with SPE guests for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:41 +02:00
Alexander Graf deb6ed13eb PPC: e500: Fix TLB lookup for 32bit CPUs
When we run 32bit guest CPUs (or 32bit guest code on 64bit CPUs) on
qemu-system-ppc64 the TLB lookup will use the full effective address
as pointer.

However, only the first 32bits are valid when MSR.CM = 0. Check for
that condition.

This makes QEMU boot an e500v2 guest with more than 1G of RAM for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:41 +02:00
Tom Musta 5b274ed74d target-ppc: Support VSX in PPC User Mode
Some modern tool chains use VSX instructions.  Therefore attempt to enable the VSX MSR
bit by default, just like similar bits (FP, VEC, SPE, etc.).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Doug Kwan e22c357b3e target-ppc: Allow little-endian user mode.
This allows running PPC64 little-endian in user mode if target is configured
that way.  In PPC64 LE user mode we set MSR.LE during initialization.

Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Alex Zuepke a721d390b3 PPC: e500: Fix MMUCSR0 emulation
A  "mtspr SPRMMUCSR0, reg"  always flushed TLB0,
because it passed the SPR number 0x3f4 to the flush routine.
But we want to flush either TLB0 or TBL1 depending on the GPR value.

Signed-off-by: Alex Zuepke <alexander.zuepke@hs-rm.de>
[agraf: change subject line, fix TCGv size mismatch]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Alexey Kardashevskiy 523e7b8ab8 spapr_iommu: Get rid of window_size in sPAPRTCETable
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.

This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy da95324ebe spapr_iommu: Enable multiple TCE requests
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.

This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.

This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Tom Musta 6ab39b1bd3 target-ppc: Fix popcntb Opcode Bug
The popcntb instruction is erroneously encoded with opcode extension (opc1,opc2) = (0x03,0x03).
Bits 21-30 of popcntb are 122 = 0b00011-0b11010 and therefore this should be encoded
as (opc1,opc2) = (0x1A, 0x03).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Alexey Kardashevskiy 6db5bb0f54 KVM: PPC: Enable compatibility mode
The host kernel implements a KVM_REG_PPC_ARCH_COMPAT register which
this uses to enable a compatibility mode if any chosen.

This sets the KVM_REG_PPC_ARCH_COMPAT register in KVM. ppc_set_compat()
signals the caller if the mode cannot be enabled by the host kernel.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix TCG compat setting]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Alexey Kardashevskiy 2a48d99335 spapr: Limit threads per core according to current compatibility mode
This puts a limit to the number of threads per core based on the current
compatibility mode. Although PowerISA specs do not specify the maximum
threads per core number, the linux guest still expects that
PowerISA2.05-compatible CPU supports only 2 threads per core as this
is what POWER6 (2.05 compliant CPU) implements, the same is for
POWER7 (2.06, 4 threads) and POWER8 (2.07, 8 threads).

This calls spapr_fixup_cpu_smt_dt() with the maximum allowed number of
threads which affects ibm,ppc-interrupt-server#s and
ibm,ppc-interrupt-gserver#s properties.

The number of CPU nodesremains unchanged.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Alexey Kardashevskiy 1a68b71419 target-ppc: Define Processor Compatibility Masks
This introduces PCR mask for supported compatibility modes.
This will be used later by the ibm,client-architecture-support call.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:37 +02:00
Alexey Kardashevskiy 6d9412ea81 target-ppc: Implement "compat" CPU option
This adds basic support for the "compat" CPU option. By specifying
the compat property, the user can manually switch guest CPU mode from
"raw" to "architected".

This defines feature disable bits which are not used yet as, for example,
PowerISA 2.07 says if 2.06 mode is selected, the TM bit does not matter -
transactional memory (TM) will be disabled because 2.06 does not define
it at all. The same is true for VSX and 2.05 mode. So just setting a mode
must be ok.

This does not change the existing behavior as the actual compatibility
mode support is coming in next patches.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:37 +02:00
Alexey Kardashevskiy 8dfa3a5e85 target-ppc: Add "compat" CPU option
PowerISA defines a compatibility mode for server POWERPC CPUs which
is supported by the PCR special register which is hypervisor privileged.
To support this mode for guests, SPAPR defines a set of virtual PVRs,
one per PowerISA spec version. When a hypervisor needs a guest to work in
a compatibility mode, it puts a virtual PVR value into @cpu-version
property of a CPU node.

This introduces a "compat" CPU option which defines maximal compatibility
mode enabled. The supported modes are power6/power7/power8.

This does not change the existing behaviour, new property will be used
by next patches.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:37 +02:00
Bharata B Rao 1e6ed54ef8 target-ppc: Set the correct endianness in ELF dump header
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00
Greg Kurz 382d2db62b target-ppc: Introduce callback for interrupt endianness
POWER7, POWER7+ and POWER8 families use the ILE bit of the LPCR
special purpose register to decide the endianness to use when
entering interrupt handlers. When running a Linux guest, this
provides a hint on the endianness used by the kernel. And when
it comes to dumping a guest, the information is needed to write
ELF headers using the kernel endianness.

Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: change subject line]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00