Commit Graph

18 Commits

Author SHA1 Message Date
Andrea Arcangeli 953844d102 ide: Avoid canceling IDE DMA
The reason for not actually canceling the I/O is because with
virtualization and lots of VM running, a guest fs may mistake a
overload of the host, as an IDE timeout. So rather than canceling the
I/O, it's safer to wait I/O completion and simulate that the I/O has
completed just before the io cancellation was requested by the
guest. This way if ntfs or an app writes data without checking for
-EIO retval, and it thinks the write has succeeded, it's less likely
to run into troubles. Similar issues for reads.

Furthermore because the DMA operation is splitted into many synchronous
aio_read/write if there's more than one entry in the SG table, without this
patch the DMA would be cancelled in the middle, something we've no idea if it
happens on real hardware too or not. Overall this seems a great risk for zero
gain.

This approach is sure safer than previous code given we can't pretend all guest
fs code out there to check for errors and reply the DMA if it was completed
partially, given a timeout would never materialize on a real harddisk unless
there are defective blocks (and defective blocks are practically only an issue
for reads never for writes in any recent hardware as writing to blocks is the
way to fix them) or the harddisk breaks as a whole.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Juan Quintela 5ee84c3375 ide: fix migration in the middle of a bmdma transfer
It reintroduces
    Revert "ide save/restore pio/atapi cmd transfer fields and io buffer"

but using subsections.  Added bonus is the addition of ide_dummy_transfer_stop
to transfer_end_table, that was missing.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 16:19:51 -05:00
Juan Quintela 57338424aa Revert "ide save/restore current transfer fields"
This reverts commit 42ee76fe82.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 16:19:51 -05:00
Marcelo Tosatti 42ee76fe82 ide save/restore current transfer fields
If migration takes place between write of the bmdma address register and
write of the command register (to initiate DMA), the destination will
not properly start the DMA op, hanging the guest:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:16:41:00:00/00:00:00:00:00/e0 tag 0 dma 11264 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }

Fix by sending current transfer information in the migration data.

We need to update ide version to 4 for this to work.  As we don't
have subsectios, we need to chain the update increase until
vmstate_ide_pci (quintela)

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 15:42:02 -06:00
Juan Quintela 407a4f3073 ide: port pci ide to vmstate
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:46 -05:00
Juan Quintela 4c3df0ecc2 ide: split cmd646 and piix from pci.c
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.

Patchworks-ID: 35301
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Juan Quintela 3e7e1558af ide: export needed ide-pci functions for split
Patchworks-ID: 35300
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Juan Quintela 65c0f1351f ide: create ide/pci.h for common ide pci definitions
Patchworks-ID: 35299
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Juan Quintela e6a7830acd ide: Remove cast in pci_register_bar
We already have a PCIDevice at that point

Patchworks-ID: 35296
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Juan Quintela 61073e0f53 ide: change cast to DO_UPCAST
Patchworks-ID: 35293
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Markus Armbruster e23a1b33b5 New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07 08:54:54 -05:00
Markus Armbruster 499cf1027f Rename pci_create_noinit() to pci_create()
It's qdev_create() specialized for PCI, so name it accordingly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:53 -05:00
Gerd Hoffmann 1f850f1064 switch ide bus to inplace allocation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:47 -05:00
Gerd Hoffmann feef310217 ide/pci: convert to qdev.
With this patch applied ide drives (when attached to a pci adapter) can
be created via -device, like this:

  -drive if=none,id=mydisk,file=/path/to/disk.img
  -device ide-drive,drive=mydisk,bus=ide.0,unit=0

Note that creating a master on ide1 doesn't work that way.  That is a
side effect of qemu creating a cdrom automagically even if you don't
ask for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15 20:04:24 +00:00
Gerd Hoffmann 9a43dba0d6 ide/pci: fix indention
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15 20:00:53 +00:00
Stefan Weil ae027ad3c5 mips malta: Fix fdc regression and use qdev for i8042 setup
8baf73adf6 (qdev/isa: convert fdc)
breaks MIPS Malta:

Tried to create isa device isa-fdc with no isa bus present

Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.

Thanks to Gerd Hoffmann for his hints.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:34 -05:00
Gerd Hoffmann f455e98cf4 ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:27 -05:00
Gerd Hoffmann 59f2a78793 ide: move code to hw/ide/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:46:50 -05:00