Add some compile-time asserts to the load_cpu_field() and store_cpu_field()
macros that the struct field being accessed is the expected size. This
lets us catch cases where we incorrectly tried to do a 32-bit load
from a 64-bit struct field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230424153909.1419369-3-peter.maydell@linaro.org
In several places in the 32-bit Arm translate.c, we try to use
load_cpu_field() to load from a CPUARMState field into a TCGv_i32
where the field is actually 64-bit. This works on little-endian
hosts, but gives the wrong half of the register on big-endian.
Add a new load_cpu_field_low32() which loads the low 32 bits
of a 64-bit field into a TCGv_i32. The new macro includes a
compile-time check against accidentally using it on a field
of the wrong size. Use it to fix the two places in the code
where we were using load_cpu_field() on a 64-bit field.
This fixes a bug where on big-endian hosts the guest would
crash after executing an ERET instruction, and a more corner
case one where some UNDEFs for attempted accesses to MSR
banked registers from Secure EL1 might go to the wrong EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230424153909.1419369-2-peter.maydell@linaro.org
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
move the module containing cpu models definitions
for 32bit TCG-only CPUs to tcg/ and rename it for clarity.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-8-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the 64-bit CPUs that are TCG-only:
- cortex-a35
- cortex-a55
- cortex-a72
- cortex-a76
- a64fx
- neoverse-n1
Keep the CPUs that can be used with KVM:
- cortex-a57
- cortex-a53
- max
- host
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to move the TCG-only -cpu max configuration code under
CONFIG_TCG. To be able to do that we need to make sure the qtests
still have some cpu configured even when no other accelerator is
available.
Delineate now what is used with TCG-only and what is also used with
qtests to make the subsequent patches cleaner.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-5-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce aarch64_max_tcg_initfn that contains the TCG-only part of
-cpu max configuration. We'll need that to be able to restrict this
code to a TCG-only config in the next patches.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230426180013.14814-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sve-max-vq property has been removed from the -cpu max used with
KVM, so code under kvm_enabled in cpu_max_set_sve_max_vq is not
reachable.
Fixes: 0baa21be49 ("target/arm: Make KVM -cpu max exactly like -cpu host")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230426180013.14814-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The file cpu_tcg.c is about to be moved into the tcg/ directory, so
move the register definitions into a new file.
Also move the function declaration to the more appropriate cpregs.h.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
=vxou
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fix compilation issues under Debian 10
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
# a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
# Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
# E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
# nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
# JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
# =vxou
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Apr 2023 01:19:14 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
cpus-common: stop using mb_set/mb_read
async: Suppress GCC13 false positive in aio_bh_poll()
tests: vhost-user-test: release mutex on protocol violation
Update linux headers to v6.3rc5
update-linux-headers.sh: Add missing kernel headers.
Fix libvhost-user.c compilation.
target/i386: Add support for PREFETCHIT0/1 in CPUID enumeration
target/i386: Add support for AVX-NE-CONVERT in CPUID enumeration
target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration
target/i386: Add support for AVX-IFMA in CPUID enumeration
target/i386: Add support for AMX-FP16 in CPUID enumeration
target/i386: Add support for CMPCCXADD in CPUID enumeration
i386/cpu: Update how the EBX register of CPUID 0x8000001F is set
i386/sev: Update checks and information related to reduced-phys-bits
qemu-options.hx: Update the reduced-phys-bits documentation
qapi, i386/sev: Change the reduced-phys-bits value from 5 to 1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Latest Intel platform Granite Rapids has introduced a new instruction -
PREFETCHIT0/1, which moves code to memory (cache) closer to the
processor depending on specific hints.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 14]
Add CPUID definition for PREFETCHIT0/1.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-NE-CONVERT is a new set of instructions which can convert low
precision floating point like BF16/FP16 to high precision floating point
FP32, as well as convert FP32 elements to BF16. This instruction allows
the platform to have improved AI capabilities and better compatibility.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 5]
Add CPUID definition for AVX-NE-CONVERT.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-VNNI-INT8 is a new set of instructions in the latest Intel platform
Sierra Forest, aims for the platform to have superior AI capabilities.
This instruction multiplies the individual bytes of two unsigned or
unsigned source operands, then adds and accumulates the results into the
destination dword element size operand.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 4]
AVX-VNNI-INT8 is on a new feature bits leaf. Add a CPUID feature word
FEAT_7_1_EDX for this leaf.
Add CPUID definition for AVX-VNNI-INT8.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-IFMA is a new instruction in the latest Intel platform Sierra
Forest. This instruction packed multiplies unsigned 52-bit integers and
adds the low/high 52-bit products to Qword Accumulators.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 23]
Add CPUID definition for AVX-IFMA.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Latest Intel platform Granite Rapids has introduced a new instruction -
AMX-FP16, which performs dot-products of two FP16 tiles and accumulates
the results into a packed single precision tile. AMX-FP16 adds FP16
capability and allows a FP16 GPU trained model to run faster without
loss of accuracy or added SW overhead.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 21]
Add CPUID definition for AMX-FP16.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CMPccXADD is a new set of instructions in the latest Intel platform
Sierra Forest. This new instruction set includes a semaphore operation
that can compare and add the operands if condition is met, which can
improve database performance.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 7]
Add CPUID definition for CMPCCXADD.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230303065913.1246327-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the setting of CPUID 0x8000001F EBX to clearly document the ranges
associated with fields being set.
Fixes: 6cb8f2a663 ("cpu/i386: populate CPUID 0x8000_001F when SEV is active")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <5822fd7d02b575121380e1f493a8f6d9eba2b11a.1664550870.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value of the reduced-phys-bits parameter is propogated to the CPUID
information exposed to the guest. Update the current validation check to
account for the size of the CPUID field (6-bits), ensuring the value is
in the range of 1 to 63.
Maintain backward compatibility, to an extent, by allowing a value greater
than 1 (so that the previously documented value of 5 still works), but not
allowing anything over 63.
Fixes: d8575c6c02 ("sev/i386: add command to initialize the memory encryption context")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <cca5341a95ac73f904e6300f10b04f9c62e4e8ff.1664550870.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both TCG and KVM emulate ckc, cputm, last_break and prefix, and it's
quite useful to have them during debugging. Right now they are grouped
together with KVM-only pp, pfault_token, pfault_select and
pfault_compare in s390-virt.xml, and are not available when debugging
TCG-emulated code.
Move KVM-only registers into the new s390-virt-kvm.xml file. Advertise
s390-virt.xml always, and the new s390-virt-kvm.xml only for KVM.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230314101813.174874-1-iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
=+I8i
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230421' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
# RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
# xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
# PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
# rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
# aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
# FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
# =+I8i
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Apr 2023 05:38:16 PM BST
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230421' of https://github.com/quic/qemu:
Hexagon (target/hexagon) Add overrides for cache/sync/barrier instructions
Hexagon (target/hexagon) Remove unused slot variable in helpers
Hexagon (tests/tcg/hexagon) Move HVX test infra to header file
Hexagon (target/hexagon) Updates to USR should use get_result_gpr
Hexagon (target/hexagon) Add overrides for count trailing zeros/ones
Hexagon (target/hexagon) Merge arguments to probe_pkt_scalar_hvx_stores
Hexagon (target/hexagon) Remove redundant/unused macros
Use black code style for python scripts
Use f-strings in python scripts
Hexagon (translate.c): avoid redundant PC updates on COF
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of these are not modelled in QEMU, so save the overhead of
calling a helper.
The only exception is dczeroa. It assigns to hex_dczero_addr, which
is handled during packet commit.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230410202402.2856852-1-tsimpson@quicinc.com>
The slot variable in helpers was only passed to log_reg_write function
where the argument is unused.
- Remove declaration from generated helper functions
- Remove slot argument from log_reg_write
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407204521.357244-1-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230405164211.30015-3-tsimpson@quicinc.com>
The following instructions are overriden
S2_ct0 Count trailing zeros
S2_ct1 Count trailing ones
S2_ct0p Count trailing zeros (register pair)
S2_ct1p Count trailing ones (register pair)
These instructions are not handled by idef-parser because the
imported semantics uses bit-reverse. However, they are
straightforward to implement in TCG with tcg_gen_ctzi_*
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405164211.30015-1-tsimpson@quicinc.com>
Reducing the number of arguments reduces the overhead of the helper
call
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405164211.30015-2-tsimpson@quicinc.com>
Remove the following macros (remnants of the old generator design)
READ_REG
READ_PREG
WRITE_RREG
WRITE_PREG
Modify macros that rely on the above
The following are unused
READ_IREG
fGET_FIELD
fSET_FIELD
fREAD_P3
fREAD_NPC
fWRITE_LC0
fWRITE_LC1
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405183048.147767-1-tsimpson@quicinc.com>
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-3-quic_mliebel@quicinc.com>
Replace python 2 format string with f-strings
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-2-quic_mliebel@quicinc.com>
When there is a conditional change of flow or an endloop instruction, we
preload HEX_REG_PC with ctx->next_PC at gen_start_packet(). Nonetheless,
we still generate TCG code to do this update again at gen_goto_tb() when
the condition for the COF is not met, thus producing redundant
instructions. This can be seen with the following packet:
0x004002e4: 0x5c20d000 { if (!P0) jump:t PC+0 }
Which generates this TCG code:
---- 004002e4
-> mov_i32 pc,$0x4002e8
and_i32 loc9,p0,$0x1
mov_i32 branch_taken,loc9
add_i32 pkt_cnt,pkt_cnt,$0x2
add_i32 insn_cnt,insn_cnt,$0x2
brcond_i32 branch_taken,$0x0,ne,$L1
goto_tb $0x0
mov_i32 pc,$0x4002e4
exit_tb $0x7fb0c36e5200
set_label $L1
goto_tb $0x1
-> mov_i32 pc,$0x4002e8
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
Note that even after optimizations, the redundant PC update is still
present:
---- 004002e4
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
mov_i32 branch_taken,$0x1 sync: 0 dead: 0 1 pref=0xffff
add_i32 pkt_cnt,pkt_cnt,$0x2 sync: 0 dead: 0 1 pref=0xffff
add_i32 insn_cnt,insn_cnt,$0x2 sync: 0 dead: 0 1 2 pref=0xffff
goto_tb $0x1
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
With this patch, the second redundant update is properly discarded.
Note that we need the additional "move_to_pc" flag instead of just
avoiding the update whenever `dest == ctx->next_PC`, as that could
potentially skip updates from a COF with met condition, whose
ctx->branch_dest just happens to be equal to ctx->next_PC.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <fc059153c3f0526d97b7f13450c02b276b0908e1.1679519341.git.quic_mathbern@quicinc.com>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----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=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to get rid of the "#ifdef TARGET_X86_64" compile-time switch
in the long run, so we can drop the separate compilation of the
"qemu-system-i386" binary one day - but we then still need a way to
run a guest with max. CPU settings in 32-bit mode. So the "max" CPU
should determine its family/model/stepping settings according to the
"large mode" (LM) CPU feature bit during runtime, so that it is
possible to run "qemu-system-x86_64 -cpu max,lm=off" and still get
a sane family/model/stepping setting for the guest CPU.
To be able to check the LM bit, we have to move the code that sets
up these properties to a "realize" function, since the LM setting is
not available yet when the "instance_init" function is being called.
Message-Id: <20230306154311.476458-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So that we can avoid the "older gdb crashes" problem described in
commit 5787d17a42 and which caused us to disable reporting pauth
information via the gdbstub, newer gdb is going to implement support
for recognizing the pauth information via a new feature name:
org.gnu.gdb.aarch64.pauth_v2
Older gdb won't recognize this feature name, so we can re-enable the
pauth support under the new name without risking them crashing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230406150827.3322670-1-peter.maydell@linaro.org
FEAT_PAN3 adds an EPAN bit to SCTLR_EL1 and SCTLR_EL2, which allows
the PAN bit to make memory non-privileged-read/write if it is
user-executable as well as if it is user-read/write.
Implement this feature and enable it in the AArch64 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-4-peter.maydell@linaro.org
The syndrome value reported to ESR_EL2 should only contain the
detailed instruction syndrome information when the fault has been
caused by a stage 2 abort, not when the fault was a stage 1 abort
(i.e. caused by execution at EL2). We were getting this wrong and
reporting the detailed ISV information all the time.
Fix the bug by checking fi->stage2. Add a TODO comment noting the
cases where we'll have to come back and revisit this when we
implement FEAT_LS64 and friends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-3-peter.maydell@linaro.org
We already pass merge_syn_data_abort() two fields from the
ARMMMUFaultInfo struct, and we're about to want to use a third field.
Refactor to just pass a pointer to the fault info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230331145045.2584941-2-peter.maydell@linaro.org
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous patch wrongly replaced FEAT_XSAVE_XCR0_{LO|HI} with
FEAT_XSAVE_XSS_{LO|HI} in CPUID(EAX=12,ECX=1):{ECX,EDX}. As a result,
SGX enclaves only supported SSE and x87 feature (xfrm=0x3).
Fixes: 301e90675c ("target/i386: Enable support for XSAVES based features")
Signed-off-by: Yang Zhong <yang.zhong@linux.intel.com>
Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20230406064041.420039-1-yang.zhong@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases (for example gen_compute_branch_nm in
nanomips_translate.c.inc) registers can be unused
on some paths and a negative value is passed in that case:
gen_compute_branch_nm(ctx, OPC_BPOSGE32, 4, -1, -2,
imm << 1);
To avoid an out of bounds access in those cases, introduce
assertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains (CID 1507880) that the declaration "int error_code;"
in mmu_translate() is unreachable code. Since this is only a declaration,
this isn't actually a bug, but:
* it's a bear-trap for future changes, because if it was changed to
include an initialization 'int error_code = foo;' then the
initialization wouldn't actually happen (being dead code)
* it's against our coding style, which wants declarations to be
at the start of blocks
* it means that anybody reading the code has to go and look up
exactly what the C rules are for skipping over variable declarations
using a goto
Move the declaration to the top of the function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230406155946.3362077-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guarded bit comes from the stage1 walk.
Fixes: Coverity CID 1507929
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only perform the extract of GP during the stage1 walk.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a crash writing to 't3', which is now a constant.
Instead, write the result of the remu to 't0'.
Fixes: 7058ff5231 ("target/ppc: Avoid tcg_const_* in translate.c")
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ clg: amend commit log s/t1/t0/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZCwLXQAKCRBAov/yOSY+
3zwUA/9d2ddHxGEBTMyF45bzc9JxRF6HoILAwMLsmPWqspPgKdGuviMVewJLt5m8
V75/BC6Sn9rhdkXALvZMRV6WQ2A16pByUaQtMYAXVsIoV8Mrpvm4GwJD1E0/cy5Q
TwDTzpDfys9WsTVj0QlCPjp0JW+KA7Y6ArMUUCdCz41L2r7mPA==
=ovw7
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230404' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230404
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZCwLXQAKCRBAov/yOSY+
# 3zwUA/9d2ddHxGEBTMyF45bzc9JxRF6HoILAwMLsmPWqspPgKdGuviMVewJLt5m8
# V75/BC6Sn9rhdkXALvZMRV6WQ2A16pByUaQtMYAXVsIoV8Mrpvm4GwJD1E0/cy5Q
# TwDTzpDfys9WsTVj0QlCPjp0JW+KA7Y6ArMUUCdCz41L2r7mPA==
# =ovw7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Apr 2023 12:34:53 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230404' of https://gitlab.com/gaosong/qemu:
target/loongarch: Enables plugins to get instruction codes
hw/loongarch/virt: Fix virt_to_phys_addr function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 049edada we added some code to handle HSTR_EL2 traps, which
we did as an inline "conditionally branch over a
gen_exception_insn()". Unfortunately this fails to take account of
the fact that gen_exception_insn() will set s->base.is_jmp to
DISAS_NORETURN. That means that at the end of the TB we won't
generate the necessary code to handle the "branched over the trap and
continued normal execution" codepath. The result is that the TCG
main loop thinks that we stopped execution of the TB due to a
situation that only happens when icount is enabled, and hits an
assertion. Explicitly set is_jmp back to DISAS_NEXT so we generate
the correct code for when execution continues past this insn.
Note that this only happens for cpreg reads; writes will call
gen_lookup_tb() which generates a valid end-of-TB.
Fixes: 049edada ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1551
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230330101900.2320380-1-peter.maydell@linaro.org
aarch64_gdb_get_pauth_reg() -- although disabled since commit
5787d17a42 ("target/arm: Don't advertise aarch64-pauth.xml to
gdb") is still compiled in. It calls pauth_ptr_mask() which is
located in target/arm/tcg/pauth_helper.c, a TCG specific helper.
To avoid a linking error when TCG is not enabled:
Undefined symbols for architecture arm64:
"_pauth_ptr_mask", referenced from:
_aarch64_gdb_get_pauth_reg in target_arm_gdbstub64.c.o
ld: symbol(s) not found for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
- Inline pauth_ptr_mask() in aarch64_gdb_get_pauth_reg()
(this is the single user),
- Rename pauth_ptr_mask_internal() as pauth_ptr_mask() and
inline it in "internals.h",
Fixes: e995d5cce4 ("target/arm: Implement gdbstub pauth extension")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230328212516.29592-1-philmd@linaro.org
[PMM: reinstated doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both cpu_check_watchpoint() and cpu_watchpoint_address_matches()
are specific to TCG system emulation. Declare them in "tcg-cpu-ops.h"
to be sure accessing them from non-TCG code is a compilation error.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell
Fabiano Rosas
Claudio Fontana
Richard Henderson
Jiaxi Chen
Tom Lendacky
Ilya Leoshkevich
Taylor Simpson
Marco Liebel
Matheus Tavares Bernardino
Thomas Huth
Akihiko Odaki
Philippe Mathieu-Daudé
Yang Zhong
Paolo Bonzini
tanhongze