virtio-input-hid.c undefines CONFIG_CURSES before including
ui/console.h. However since commits e2f82e924d and b0766612d1
that header does not have behaviour dependent on CONFIG_CURSES.
Remove the now-unneeded undef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200723192457.28136-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is to allow us to distinguish between ADB device events and ADB
bus events separately.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-22-mark.cave-ayland@ilande.co.uk>
Handle this at the ADB bus level so that individual implementations do not need
to handle this themselves.
Finally add an assert() into adb_request() to prevent developers from accidentally
making an explicit ADB request without blocking autopoll.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-21-mark.cave-ayland@ilande.co.uk>
Whilst autopoll is enabled it is necessary to prevent the ADB buffer contents
from being overwritten until the host has read back the response in its
entirety.
Add adb_autopoll_block() and adb_autopoll_unblock() functions in preparation
for ensuring that the ADB buffer contents are protected for explicit ADB
requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-16-mark.cave-ayland@ilande.co.uk>
Currently adb_request() is called both for explicit ADB requests and internal
autopoll requests via adb_poll().
Move the current functionality into do_adb_request() to be used internally and
add a simple adb_request() wrapper for explicit requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-15-mark.cave-ayland@ilande.co.uk>
Currently only 2 bits are defined: one to indicate if the request timed out (no
reply) and another to indicate whether the request was the result of an autopoll
operation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-14-mark.cave-ayland@ilande.co.uk>
Add a new pending variable to ADBBusState which is a bitmask indicating which
ADB devices have data to send. Update the bitmask every time that an ADB
request is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-13-mark.cave-ayland@ilande.co.uk>
This is required later to allow devices to assert a service request (SRQ)
signal to indicate that it has data to send, without having to consume it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-12-mark.cave-ayland@ilande.co.uk>
Rather than each ADB implementation requiring its own functions to manage
autopoll state, timers, and autopoll masks prepare to move this information
directly into ADBBusState.
Add external functions within adb.h to allow each ADB implementation to
manage the new autopoll variables.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-8-mark.cave-ayland@ilande.co.uk>
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" introduced
a workaround for spurious writes to ADB register 3 when MacOS 9 enables
autopoll on the mouse device. Further analysis shows that the problem is that
only a partial request is sent, and since the len parameter is ignored then
stale data from the previous request is used causing the incorrect address
assignment.
Remove the disable-reg3-direct-writes workaround and instead check the length
parameter when the write is attempted, discarding the invalid request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-3-mark.cave-ayland@ilande.co.uk>
This will help ensure that style guidelines are being maintained during
subsequent changes.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-2-mark.cave-ayland@ilande.co.uk>
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask()
(missed in commit 5a0001ec7e).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Since commit 5a1f49718 the 'olen' variable is not really
used. Remove it to fix a warning reported by Clang static
code analyzer:
CC hw/input/adb-kbd.o
hw/input/adb-kbd.c:200:5: warning: Value stored to 'olen' is never read
olen = 0;
^ ~
Fixes: 5a1f49718 (adb: add support for QKeyCode)
Reported-by: Clang Static Analyzer
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422133152.16770-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The i8042 PS/2 Controller should not be enabled by default. It has
to be selected by machines or chipsets (e.g. SuperIO chipsets).
Message-Id: <20200115113748.24757-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-5-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX sends both the 'Set key make and break (0xfc) and
'Set all key typematic make and break' (0xfa). QEMU response
with 'Resend' as it doesn't handle these commands. HP-UX than
reports an PS/2 max retransmission exceeded error. Add these
commands and just reply with ACK.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-4-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
-----BEGIN PGP SIGNATURE-----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=iYVd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' into staging
Clean-ups: qom-ify serial and remove QDEV_PROP_PTR
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
# gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/prop-ptr-pull-request: (37 commits)
qdev/qom: remove some TODO limitations now that PROP_PTR is gone
qdev: remove QDEV_PROP_PTR
qdev: remove PROP_MEMORY_REGION
omap-gpio: remove PROP_PTR
omap-i2c: remove PROP_PTR
omap-intc: remove PROP_PTR
smbus-eeprom: remove PROP_PTR
cris: improve passing PIC interrupt vector to the CPU
mips/cps: fix setting saar property
qdev: use g_strcmp0() instead of open-coding it
leon3: use qdev gpio facilities for the PIL
leon3: use qemu_irq framework instead of callback as property
dp8393x: replace PROP_PTR with PROP_LINK
etraxfs: remove PROP_PTR usage
lance: replace PROP_PTR with PROP_LINK
vmmouse: replace PROP_PTR with PROP_LINK
sm501: make SerialMM a child, export chardev property
mips: use sysbus_mmio_get_region() instead of internal fields
mips: use sysbus_add_io()
mips: baudbase is 115200 by default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it, use the expected type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove the need to include i386/pc.h to get to the i8259 functions.
This is enough to remove the inclusion of hw/i386/pc.h from all non-x86
files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Spotted by ASAN + minor stylistic change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20191121095649.25453-1-marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The LM8323 key-scan controller is a I2C device, it will be reset
when the I2C bus it stands on is reset.
Convert its reset handler into a proper Device reset method.
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191010131527.32513-8-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
gamepad_state::buttons is a pointer to an array of structs,
not an array of structs, so should be declared in the vmstate
with VMSTATE_STRUCT_VARRAY_POINTER_INT32; otherwise we
corrupt memory on incoming migration.
We bump the vmstate version field as the easiest way to
deal with the migration break, since migration wouldn't have
worked reliably before anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20190725163710.11703-2-peter.maydell@linaro.org
ps2.c only needs to be compiled if we are building pckbd.c or pl050.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190411182240.5957-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make VIRTIO_INPUT_HOST depend on VIRTIO_INPUT.
Use CONFIG_VIRTIO_INPUT_HOST in Makefile.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190510105137.17481-2-kraxel@redhat.com
Add a new virtio-input device, which connects to a vhost-user
backend.
Instead of reading configuration directly from an input device /
evdev (like virtio-input-host), it reads it over vhost-user protocol
with {SET,GET}_CONFIG messages. The vhost-user-backend handles the
queues & events setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com
[ kraxel: drop -{non-,}transitional variants ]
[ kraxel: fix "make check" on !linux ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since uWireSlave is only used in this new header, there is no
need to expose it via "qemu/typedefs.h".
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never supposed to fail and cannot return an error, so just
have it return the proper type. Have it return 0xff on nothing
available, since that's what would happen on a real bus.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20181016112232.23241-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When building with TSC_VERBOSE not defined, we get:
CC arm-softmmu/hw/input/tsc210x.o
hw/input/tsc210x.c: In function ‘tsc2102_data_register_write’:
hw/input/tsc210x.c:554:5: error: label at end of compound statement
default:
^~~~~~~
hw/input/tsc210x.c: In function ‘tsc2102_control_register_write’:
hw/input/tsc210x.c:638:5: error: label at end of compound statement
bad_reg:
^~~~~~~
hw/input/tsc210x.c: In function ‘tsc2102_audio_register_write’:
hw/input/tsc210x.c:766:5: error: label at end of compound statement
default:
^~~~~~~
make[1]: *** [rules.mak:69: hw/input/tsc210x.o] Error 1
Fix this by replacing the culprit fprintf(stderr) calls by a more
recent API: qemu_log_mask(LOG_GUEST_ERROR). Other fprintf() calls
are left untouched.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190204204517.23698-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of i8042 device as DEVICE_CATEGORY_INPUT
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190125151440.13794-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qmp/hmp command 'system_wakeup' is simply a direct call to
'qemu_system_wakeup_request' from vl.c. This function verifies if
runstate is SUSPENDED and if the wake up reason is valid before
proceeding. However, no error or warning is thrown if any of those
pre-requirements isn't met. There is no way for the caller to
differentiate between a successful wakeup or an error state caused
when trying to wake up a guest that wasn't suspended.
This means that system_wakeup is silently failing, which can be
considered a bug. Adding error handling isn't an API break in this
case - applications that didn't check the result will remain broken,
the ones that check it will have a chance to deal with it.
Adding to that, the commit before previous created a new QMP API called
query-current-machine, with a new flag called wakeup-suspend-support,
that indicates if the guest has the capability of waking up from suspended
state. Although such guest will never reach SUSPENDED state and erroring
it out in this scenario would suffice, it is more informative for the user
to differentiate between a failure because the guest isn't suspended versus
a failure because the guest does not have support for wake up at all.
All this considered, this patch changes qmp_system_wakeup to check if
the guest is capable of waking up from suspend, and if it is suspended.
After this patch, this is the output of system_wakeup in a guest that
does not have wake-up from suspend support (ppc64):
(qemu) system_wakeup
wake-up from suspend is not supported by this guest
(qemu)
And this is the output of system_wakeup in a x86 guest that has the
support but isn't suspended:
(qemu) system_wakeup
Unable to wake up: guest is not in suspended state
(qemu)
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20181205194701.17836-4-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use DeviceClass rather than SysBusDeviceClass in
pl050_class_init().
Cc: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-10-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use DeviceClass rather than SysBusDeviceClass in
milkymist_softusb_class_init().
Cc: michael@walle.cc
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-9-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A check for scan_enabled has been added to ps2_keyboard_event in commit
143c04c7e0 to prevent stream corruption.
This works well as long as operating system is resetting keyboard, or enabling it.
This fixes IBM 40p firmware, which doesn't bother sending KBD_CMD_RESET,
KBD_CMD_ENABLE or KBD_CMD_RESET_ENABLE before trying to use the keyboard.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181021190721.2148-1-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 2858ab09e6 changed
PS/2 keyboard/mouse buffers to the standard size. However, its state
may change when migrating from the old buffer size and therefore irq needs
updating. But this change made wrong, because it throws the whole queue
if there are too much data instead of cropping it.
That commit also updates irq (because the queue state may change).
But updating the irq may change the VM state (and determinism of
the execution). E.g., when replaying the execution, one may save
the VM state and the state of the interrupt controller will be updated
at the moment of saving, instead of using the recorded update events.
This patch makes the queue update deterministic: it removes the update_irq
call and crops the queue to prevent losing the characters and changing
the required irq status.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180511081601.14610.39946.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 802cbcb730, most issues have been fixed when qemu guest
migration. But the queue size still need to check whether is equal to
PS2_QUEUE_SIZE. If yes, the wptr should set as 0. Or, wptr would larger
than PS2_QUEUE_SIZE and never come back when ps2_queue_noirq is called.
This could lead to OOB access, add check to avoid it.
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 20180607080237.12360-1-liujunjie23@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOS 9 has a bug in its PMU driver whereby after configuring the ADB bus
devices it sends another write to reg 3 on both devices resetting them
both back to the same address.
Add a new disable_direct_reg3_writes property to ADBDevice to disable these
direct writes which can enabled just for the upcoming pmu-adb support.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the Apple ADB documentation, register 3 is a 2-byte register
with the device address in the first byte, and the handler ID in the second
byte.
This is currently the opposite away to which QEMU returns them so switch the
order around.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the pckbd device away from using the old_mmio field
of MemoryRegionOps. This change only affects the memory-mapped
variant of the i8042, which is used by the Unicore32 'puv3'
board and the MIPS Jazz boards 'magnum' and 'pica61'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180601141223.26630-6-peter.maydell@linaro.org
This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally. It is still a
move in the right direction.
Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I2CSlaveClass::init is no more used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-3-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-3-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes an issue by adding bounds checking to multi-byte packets
where the PS/2 mouse data stream may become corrupted due to data being
discarded when the PS/2 ringbuffer is full.
Interrupts for Multi-byte responses are postponed until the final byte
has been queued.
These changes fix a bug where windows guests drop the mouse device
entirely requring the guest to be restarted.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150310.2FEA0381924@moya.office.hostfission.com>
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows guest's to correctly reinitialize and identify the mouse
should the guest decide to re-scan or reset during mouse input events.
When the guest sends the "Identify" command, due to the PC's hardware
architecutre it is impossible to reliably determine the response from
the command amongst other streaming data, such as mouse or keyboard
events. Standard practice is for the guest to disable the device and
then issue the identify command, so this must be obeyed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150303.7486B381924@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-4-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful to help diagnose problems related to address clashes during
MacOS 9 boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace the keymap_qcode table with automatically generated
tables.
Missing entries in keymap_qcode now fixed:
Q_KEY_CODE_ASTERISK -> KEY_KPASTERISK
Q_KEY_CODE_KP_MULTIPLY -> KEY_KPASTERISK
Q_KEY_CODE_STOP -> KEY_STOP
Q_KEY_CODE_AGAIN -> KEY_AGAIN
Q_KEY_CODE_PROPS -> KEY_PROPS
Q_KEY_CODE_UNDO -> KEY_UNDO
Q_KEY_CODE_FRONT -> KEY_FRONT
Q_KEY_CODE_COPY -> KEY_COPY
Q_KEY_CODE_OPEN -> KEY_OPEN
Q_KEY_CODE_PASTE -> KEY_PASTE
Q_KEY_CODE_FIND -> KEY_FIND
Q_KEY_CODE_CUT -> KEY_CUT
Q_KEY_CODE_LF -> KEY_LINEFEED
Q_KEY_CODE_HELP -> KEY_HELP
Q_KEY_CODE_COMPOSE -> KEY_COMPOSE
Q_KEY_CODE_RO -> KEY_RO
Q_KEY_CODE_HIRAGANA -> KEY_HIRAGANA
Q_KEY_CODE_HENKAN -> KEY_HENKAN
Q_KEY_CODE_YEN -> KEY_YEN
Q_KEY_CODE_KP_COMMA -> KEY_KPCOMMA
Q_KEY_CODE_KP_EQUALS -> KEY_KPEQUAL
Q_KEY_CODE_POWER -> KEY_POWER
Q_KEY_CODE_SLEEP -> KEY_SLEEP
Q_KEY_CODE_WAKE -> KEY_WAKEUP
Q_KEY_CODE_AUDIONEXT -> KEY_NEXTSONG
Q_KEY_CODE_AUDIOPREV -> KEY_PREVIOUSSONG
Q_KEY_CODE_AUDIOSTOP -> KEY_STOPCD
Q_KEY_CODE_AUDIOPLAY -> KEY_PLAYPAUSE
Q_KEY_CODE_AUDIOMUTE -> KEY_MUTE
Q_KEY_CODE_VOLUMEUP -> KEY_VOLUMEUP
Q_KEY_CODE_VOLUMEDOWN -> KEY_VOLUMEDOWN
Q_KEY_CODE_MEDIASELECT -> KEY_MEDIA
Q_KEY_CODE_MAIL -> KEY_MAIL
Q_KEY_CODE_CALCULATOR -> KEY_CALC
Q_KEY_CODE_COMPUTER -> KEY_COMPUTER
Q_KEY_CODE_AC_HOME -> KEY_HOMEPAGE
Q_KEY_CODE_AC_BACK -> KEY_BACK
Q_KEY_CODE_AC_FORWARD -> KEY_FORWARD
Q_KEY_CODE_AC_REFRESH -> KEY_REFRESH
Q_KEY_CODE_AC_BOOKMARKS -> KEY_BOOKMARKS
NB, the virtio-input device reports a bitmask to the guest driver that
has a bit set for each Linux keycode that the host is able to send to
the guest.
Thus by adding these extra key mappings we are technically changing the
host<->guest ABI. This would also happen any time we defined new mappings
for QEMU keycodes in future.
When a keycode is removed from the list of possible keycodes that host can
send to the guest, it means that the guest OS will think it is possible
to receive a key that in pratice can never be generated, which is harmless.
When a keycode is added to the list of possible keycodes that the host can
send to the guest, it means that the guest OS can see an unexpected event.
The Linux virtio_input.c driver code simply forwards this event to the
input_event() method in the Linux input subsystem. This in turn calls
input_handle_event(), which then calls input_get_disposition(). This method
checks if the input event is present in the permitted keys bitmap, and if
not returns INPUT_IGNORE_EVENT. Thus the unexpected event will get dropped,
which is harmless.
If the guest OS reboots, or otherwise re-initializes the virt-input device,
it will read the new keycode bitmap. No matter how many keys are defined,
the config space has a fixed 128 byte bitmap. There is, however, a size
field defiend which says how many bytes in the bitmap are used. So the guest
OS reads the size of the bitmap, and then it reads the data from bitmap upto
the designated size. So if the guest OS re-initializes at precisely the time
that QEMU is migrated across versions, in the worst case, it could conceivably
read the old size field, but then get the newly updated bitmap. If a key were
added this is harmless, since it simply means it may not process the newly
added key. If a key were removed, then it could be readnig a byte from the
bitmap that was not initialized. Fortunately QEMU always memsets() the entire
bitmap to 0, prior to setting keybits. Thus the guest OS will simply read
zeros, which is again harmless.
Based on this analysis, it is believed that there is no need to preserve the
virtio-input-hid keymaps across migration, as the host<->guest ABI change is
harmless and self-resolving at time of guest reboot.
NB, this behaviour should perhaps be formalized in the virtio-input spec
to declare how guest OS drivers should be written to be robust in their
handling of the potentially changable key bitmaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
During Qemu guest migration, a destination process invokes ps2
post_load function. In that, if 'rptr' and 'count' values were
invalid, it could lead to OOB access or infinite loop issue.
Add check to avoid it.
Reported-by: Cyrille Chatras <cyrille.chatras@orange.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171116075155.22378-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Linux, a mouse event is generated for both down and up when mouse
wheel is used. This caused virtio_input_send() to be called twice each
time the wheel was used.
This commit adds a check for the button down state and only calls
virtio_input_send() when it is true.
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20171222152531.1849-4-miika9764@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This was accidentally omitted from 77cb0f5aaf "Split adb.c into adb.c, adb-mouse.c
and adb-kbd.c".
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It makes the code clearer to separate the bus implementation
from the devices one.
Replace ADB_DPRINTF() with trace events (and adding new ones in adb-kbd.c).
Some minor changes to make checkpatch.pl happy.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20171220121406.24056-1-laurent@vivier.eu>
It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for these keys: audiomute volumedown volumeup power.
Tested with "sendkey" command in monitor and verify the behavior
in guest OS.
Signed-off-by: Tao Wu <lepton@google.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'Pause' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Pause' key is supposed to send
AT Set 1: e1 1d 45 91 9d c5 (Down) <nothing> (Up)
AT Set 2: e1 14 77 e1 f0 14 f0 77 (Down) <nothing> (Up)
which QEMU gets right. When combined with Ctrl (both left and right variants),
a different sequence is expected
AT Set 1: e0 46 e0 c6 (Down) <nothing> (Up)
AT Set 2: e0 7e e0 f0 73 (Down) <nothing> (Up)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ps2 device was previously fixed to send the special Pause/Print
scancode sequences in:
commit 8c10e0baf0
Author: Hervé Poussineau <hpoussin@reactos.org>
Date: Thu Sep 15 22:06:26 2016 +0200
ps2: use QEMU qcodes instead of scancodes
The sequence used for Pause had a small typo in the AT set 1, with a 0xe1
accidentally changed to 0x91. This is not immediately visible with Linux
guests since they run the ps2 device with AT set 2 scancodes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'Print' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Print' key is supposed to send
AT Set 1: e0 2a e0 37 (Down) e0 b7 e0 aa (Up)
AT Set 2: e0 12 e0 7c (Down) e0 f0 7c e0 f0 12 (Up)
which QEMU gets right. When combined with Shift/Ctrl (both left and right
variants), the leading two bytes should be dropped, resulting in
AT Set 1: e0 37 (Down) e0 b7 (Up)
AT Set 2: e0 7c (Down) e0 f0 7c (Up)
This difference is pretty benign, since of all the operating systems I have
checked (Linux, FreeBSD and OpenStack), none bother to check the leading two
bytes anyway. This change none the less makes the ps2 device better follow real
hardware behaviour.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'Print' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Print' key is supposed to send
AT Set 1: e0 2a e0 37 (Down) e0 b7 e0 aa (Up)
AT Set 2: e0 12 e0 7c (Down) e0 f0 7c e0 f0 12 (Up)
which QEMU gets right. When pressed in combination with the 'Alt_L' or 'Alt_R'
keys (which signify SysRq), the scancodes are required to follow a different
scheme. With Alt_L, the expected sequences are
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
And with Alt_R
AT set 1: e0 38, 54 (Down) d4, e0 b8 (Up)
AT set 2: e0 11, 84 (Down) f0 84, f0 e0 11 (Up)
It is actually slightly more complicated than that, because (according results
of 'showkey -s', keyboards will in fact first release the currently pressed
modifier before sending the sequence above (which effectively re-presses &
then releases the modifier) and finally re-press the original modifier
afterwards. IOW, with Alt_L we need to send
AT set 1: b8, 38, 54 (Down) d4, b8, 38 (Up)
AT set 2: f0 11, 11, 84 (Down) f0 84, f0 11, 11 (Up)
And with Alt_R
AT set 1: e0 b8, e0 38, 54 (Down) d4, e0 b8, e0 38 (Up)
AT set 2: e0 f0 11, e0 11, 84 (Down) f0 84, e0 f0 11, e0 11 (Up)
The AT set 3 scancodes have no special handling for Alt-Print.
Rather than fixing the handling of the 'print' key in the ps2 driver to consider
the Alt modifiers, way back, a patch was commited that defined an extra 'sysrq'
key name:
commit f2289cb692
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
With this patch QEMU would send
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
but this doesn't match what actual real keyboards send, as it is not releasing
the original modifier & pressing it again afterwards. In addition the original
problem remains, and a new problem was added:
- The sequence 'alt-print-t' is still broken, acting as if 'print-t' was
requested
- The sequence 'sysrq-t' is broken, injecting an undefine scancode sequence
tot he guest os (bare 0x54)
To deal with this mess we make these changes to the ps2 code, so that we track
the state of modifier keys (Alt, Shift, Ctrl - both left & right). Then we can
vary what scancodes are sent for Q_KEY_CODE_PRINT according to the Alt key
modifier state
Interestingly, it appears that of operating systems I've checked (Linux, FreeBSD
and OpenSolaris), none of them actually bother to validate the full sequences
for a unmodified 'Print' key. They all just ignore the leading "e0 2a" and
trigger based off "e0 37" alone. The latter two byte sequence is what keyboards
send with 'Print' is combined with 'Shift' or 'Ctrl' modifiers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hardware scancodes are all documented in hex, so use that in trace
events to make it easier to understand.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu uses wheel-up/down button events for mouse wheel input, however
linux applications typically want REL_WHEEL events.
This fixes wheel with linux guests. Tested with X11/wayland, and
windows virtio-input driver.
Based on a patch from Marc.
Added property to enable/disable wheel axis.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170926113243.26081-1-kraxel@redhat.com
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
