FEAT_GTG is a change tho the ID register ID_AA64MMFR0_EL1 so that it
can report a different set of supported granule (page) sizes for
stage 1 and stage 2 translation tables. As of commit c20281b2a5
we already report the granule sizes that way for '-cpu max', and now
we also correctly make attempts to use unimplemented granule sizes
fail, so we can report the support of the feature in the
documentation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221003162315.2833797-4-peter.maydell@linaro.org
openpower.xyz was retired some time ago. The OpenBMC Jenkins is where
images can be found these days.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20221004050042.22681-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the ID registers for TCG's '-cpu max' to report a FEAT_PMUv3p5
compliant PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-11-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The architectural feature FEAT_ETS (Enhanced Translation
Synchronization) is a set of tightened guarantees about memory
ordering involving translation table walks:
* if memory access RW1 is ordered-before memory access RW2 then it
is also ordered-before any translation table walk generated by RW2
that generates a translation fault, address size fault or access
fault
* TLB maintenance on non-exec-permission translations is guaranteed
complete after a DSB (ie it does not need the context
synchronization event that you have to have if you don’t have
FEAT_ETS)
For QEMU’s implementation we don’t reorder translation table walk
accesses, and we guarantee to finish the TLB maintenance as soon as
the TLB op is done (the tlb_flush functions will complete at the end
of the TLB, and TLB ops always end the TB because they’re sysreg
writes).
So we’re already compliant and all we need to do is say so in the ID
registers for the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-6-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some more controllers have been modeled recently. Reflect that in the
list of supported devices. New machines were also added.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220706172131.809255-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - fixed URL links
- Moved Facebook Yosemite section at the end of the file ]
Message-Id: <20220705191400.41632-10-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Note that SME remains effectively disabled for user-only,
because we do not yet set CPACR_EL1.SMEN. This needs to
wait until the kernel ABI is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 60592cfed2 ("hw/arm/virt: dt: add kaslr-seed property"), the
kaslr-seed property was added, but the equally as important rng-seed
property was forgotten about, which has identical semantics for a
similar purpose. This commit implements it in exactly the same way as
kaslr-seed. It then changes the name of the disabling option to reflect
that this has more to do with randomness vs determinism, rather than
something particular about kaslr.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[PMM: added deprecated.rst section for the deprecation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the properties for SVE. The main difference is
that any arbitrary set of powers of 2 may be supported,
and not the stricter constraints that apply to SVE.
Include a property to control FEAT_SME_FA64, as failing
to restrict the runtime to the proper subset of insns
could be a major point for bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220620175235.60881-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FEAT_DoubleFault extension adds the following:
* All external aborts on instruction fetches and translation table
walks for instruction fetches must be synchronous. For QEMU this
is already true.
* SCR_EL3 has a new bit NMEA which disables the masking of SError
interrupts by PSTATE.A when the SError interrupt is taken to EL3.
For QEMU we only need to make the bit writable, because we have no
sources of SError interrupts.
* SCR_EL3 has a new bit EASE which causes synchronous external
aborts taken to EL3 to be taken at the same entry point as SError.
(Note that this does not mean that they are SErrors for purposes
of PSTATE.A masking or that the syndrome register reports them as
SErrors: it just means that the vector offset is different.)
* The existing SCTLR_EL3.IESB has an effective value of 1 when
SCR_EL3.NMEA is 1. For QEMU this is a no-op because we don't need
different behaviour based on IESB (we don't need to do anything to
ensure that error exceptions are synchronized).
So for QEMU the things we need to change are:
* Make SCR_EL3.{NMEA,EASE} writable
* When taking a synchronous external abort at EL3, adjust the
vector entry point if SCR_EL3.EASE is set
* Advertise the feature in the ID registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220531151431.949322-1-peter.maydell@linaro.org
The architectural feature RASv1p1 introduces the following new
features:
* new registers ERXPFGCDN_EL1, ERXPFGCTL_EL1 and ERXPFGF_EL1
* new bits in the fine-grained trap registers that control traps
for these new registers
* new trap bits HCR_EL2.FIEN and SCR_EL3.FIEN that control traps
for ERXPFGCDN_EL1, ERXPFGCTL_EL1, ERXPFGP_EL1
* a larger number of the ERXMISC<n>_EL1 registers
* the format of ERR<n>STATUS registers changes
The architecture permits that if ERRIDR_EL1.NUM is 0 (as it is for
QEMU) then all these new registers may UNDEF, and the HCR_EL2.FIEN
and SCR_EL3.FIEN bits may be RES0. We don't have any ERR<n>STATUS
registers (again, because ERRIDR_EL1.NUM is 0). QEMU does not yet
implement the fine-grained-trap extension. So there is nothing we
need to implement to be compliant with the feature spec. Make the
'max' CPU report the feature in its ID registers, and document it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220531114258.855804-1-peter.maydell@linaro.org
In commit 5814d587fe we added support for emulating
FEAT_HCX (Support for the HCRX_EL2 register). However we
forgot to add it to the list in emulated.rst. Correct the
omission.
Fixes: 5814d587fe ("target/arm: Enable FEAT_HCX for -cpu max")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220520084320.424166-1-peter.maydell@linaro.org
Add fby35 to the list of Aspeed boards.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220506193354.990532-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Armv8.4 feature FEAT_IDST specifies that exceptions generated by
read accesses to the feature ID space should report a syndrome code
of 0x18 (EC_SYSTEMREGISTERTRAP) rather than 0x00 (EC_UNCATEGORIZED).
The feature ID space is defined to be:
op0 == 3, op1 == {0,1,3}, CRn == 0, CRm == {0-7}, op2 == {0-7}
In our implementation we might return the EC_UNCATEGORIZED syndrome
value for a system register access in four cases:
* no reginfo struct in the hashtable
* cp_access_ok() fails (ie ri->access doesn't permit the access)
* ri->accessfn returns CP_ACCESS_TRAP_UNCATEGORIZED at runtime
* ri->type includes ARM_CP_RAISES_EXC, and the readfn raises
an UNDEF exception at runtime
We have very few regdefs that set ARM_CP_RAISES_EXC, and none of
them are in the feature ID space. (In the unlikely event that any
are added in future they would need to take care of setting the
correct syndrome themselves.) This patch deals with the other
three cases, and enables FEAT_IDST for AArch64 -cpu max.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509155457.3560724-1-peter.maydell@linaro.org
Enable the FEAT_S2FWB for -cpu max. Since FEAT_S2FWB requires that
CLIDR_EL1.{LoUU,LoUIS} are zero, we explicitly squash these (the
inherited CLIDR_EL1 value from the Cortex-A57 has them as 1).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-5-peter.maydell@linaro.org
Enable the n1 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the a76 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns not merging memory access, which TCG does
not implement. Thus we can trivially enable this feature.
Add a comment to handle_hint for the DGH instruction, but no code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns cache speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns branch speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU. Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE. The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The description in the Arm ARM of the requirements of FEAT_BBM is
admirably clear on the guarantees it provides software, but slightly
more obscure on what that means for implementations. The description
of the equivalent SMMU feature in the SMMU specification (IHI0070D.b
section 3.21.1) is perhaps a bit more detailed and includes some
example valid implementation choices. (The SMMU version of this
feature is slightly tighter than the CPU version: the CPU is permitted
to raise TLB Conflict aborts in some situations that the SMMU may
not. This doesn't matter for QEMU because we don't want to do TLB
Conflict aborts anyway.)
The informal summary of FEAT_BBM is that it is about permitting an OS
to switch a range of memory between "covered by a huge page" and
"covered by a sequence of normal pages" without having to engage in
the 'break-before-make' dance that has traditionally been
necessary. The 'break-before-make' sequence is:
* replace the old translation table entry with an invalid entry
* execute a DSB insn
* execute a broadcast TLB invalidate insn
* execute a DSB insn
* write the new translation table entry
* execute a DSB insn
The point of this is to ensure that no TLB can simultaneously contain
TLB entries for the old and the new entry, which would traditionally
be UNPREDICTABLE (allowing the CPU to generate a TLB Conflict fault
or to use a random mishmash of values from the old and the new
entry). FEAT_BBM level 2 says "for the specific case where the only
thing that changed is the size of the block, the TLB is guaranteed
not to do weird things even if there are multiple entries for an
address", which means that software can now do:
* replace old translation table entry with new entry
* DSB
* broadcast TLB invalidate
* DSB
As the SMMU spec notes, valid ways to do this include:
* if there are multiple entries in the TLB for an address,
choose one of them and use it, ignoring the others
* if there are multiple entries in the TLB for an address,
throw them all out and do a page table walk to get a new one
QEMU's page table walk implementation for Arm CPUs already meets the
requirements for FEAT_BBM level 2. When we cache an entry in our TCG
TLB, we do so only for the specific (non-huge) page that the address
is in, and there is no way for the TLB data structure to ever have
more than one TLB entry for that page. (We handle huge pages only in
that we track what part of the address space is covered by huge pages
so that a TLB invalidate operation for an address in a huge page
results in an invalidation of the whole TLB.) We ignore the Contiguous
bit in page table entries, so we don't have to do anything for the
parts of FEAT_BBM that deal with changis to the Contiguous bit.
FEAT_BBM level 2 also requires that the nT bit in block descriptors
must be ignored; since commit 39a1fd2528 we do this.
It's therefore safe for QEMU to advertise FEAT_BBM level 2 by
setting ID_AA64MMFR2_EL1.BBM to 2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-3-peter.maydell@linaro.org
The Arm FEAT_TTL architectural feature allows the guest to provide an
optional hint in an AArch64 TLB invalidate operation about which
translation table level holds the leaf entry for the address being
invalidated. QEMU's TLB implementation doesn't need that hint, and
we correctly ignore the (previously RES0) bits in TLB invalidate
operation values that are now used for the TTL field. So we can
simply advertise support for it in our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-2-peter.maydell@linaro.org
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org
Describe that the gic-version influences the maximum number of CPUs.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com
[PMM: minor punctuation tweaks]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
-----BEGIN PGP SIGNATURE-----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=0F2M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220227' into staging
aspeed queue:
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
# gpg: Signature made Sun 27 Feb 2022 08:45:45 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20220227:
aspeed/sdmc: Add trace events
aspeed/smc: Add an address mask on segment registers
aspeed: Introduce a create_pca9552() helper
aspeed: rainier: Add strap values taken from hardware
aspeed: rainier: Add i2c LED devices
ast2600: Add Secure Boot Controller model
arm: Remove swift-bmc machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It was scheduled for removal in 7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the BMC attached to the OpenBMC Mori board.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Ilkyun Choi <ikchoi@google.com>
Message-id: 20220208233104.284425-1-venture@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generally a guest needs an external source of randomness to properly
enable things like address space randomisation. However in a trusted
boot environment where the firmware will cryptographically verify
components having random data in the DTB will cause verification to
fail. Add a control knob so we can prevent this being added to the
system DTB.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220105135009.1584676-22-alex.bennee@linaro.org>
Move it to the supported list.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20211117065752.330632-5-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A common use case for the ASPEED machine is to boot a Linux kernel.
Provide a full example command line.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20211117065752.330632-4-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the latest URL for the OpenBMC CI. The old URL still works, but
redirects.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20211117065752.330632-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be
removed in v7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20211117065752.330632-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211118192744.64325-1-philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add BBRAM and eFUSE usage to the Xilinx Versal Virt board
document.
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210917052400.1249094-10-tong.ho@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add -cpu a64fx to use A64FX processor when -machine virt option is
specified. In addition, add a64fx to the Supported guest CPU types
in the virt.rst document.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
This commit fixes various places in the manual which were
using single backticks when double backticks (for literal text)
were intended, and covers those files where only one or two
instances of these errors were made.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell
Joel Stanley
Hao Wu
Daniel P. Berrangé
Cédric Le Goater
Peter Delevoryas
Richard Henderson
Jason A. Donenfeld
Peter Delevoryas
Jamin Lin
Heinrich Schuchardt
Patrick Venture
Marc Zyngier
Alex Bennée
Philippe Mathieu-Daudé
Willian Rampazzo
Tong Ho
Chris Rauer
Shuuichirou Ishii