RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
The windows jobs (especially the 32-bit job) recently started to
hit the timeout limit. Bump it a little bit to ease the situation
(80 minutes is quite long already - OTOH, these jobs do not have to
wait for a job from the container stage to finish, so this should
still be OK).
Additionally, some update on the container side recently enabled
OpenGL in these jobs - but the corresponding code fails to compile.
Thus disable OpenGL here for the time being until someone figured
out the proper fix in the shader code for this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230104123559.277586-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmOlxtEACgkQ+9DbCVqe
KkR/VwgAlgPHfM4JQoG320kWNd/TuB/9NOaBSD/VINyx+uDlbix4NZ16Ij6I6JaG
mOxOAg1RVVUipul7lz4LTh8caKr5c4S+70hZlLxiKSbqkxUlqAdE0TLO88f1xx6q
qBrVQj5YoWBLH0sgsLj+QHhCpP8IGYl/hFjzYA0xbnllt15uiYXoHshBh8/YODnX
UjgGvzABoqlnEh/QD3pT8B5VyCUbF8j46CWWOV+XPSbRrf1FnrNgFIn5kdOJt+jE
cjPaMZSTpP4W5qZWB7xQNhQdBZvnKQV95gUvtEwdmwlpCr8rDfYsRcI8qRpAbHeL
XaDwHuG7Uo9OQf++4K9voH7TptAcqQ==
=0Yp9
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu into staging
testing updates:
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
# gpg: Signature made Fri 23 Dec 2022 15:18:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu:
gitlab-ci: Disable docs and GUIs for the build-tci and build-tcg-disabled jobs
tests/docker: use prebuilt toolchain for debian-hexagon-cross
tests/tcg: fix unused variable in linux-test
configure: repeat ourselves for the benefit of CI
gitlab: turn off verbose logging for make check on custom runners
configure: Fix check-tcg not executing any tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
-----BEGIN PGP SIGNATURE-----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=3XCu
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu into staging
9pfs: Windows host prep, cleanup
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
# gpg: Signature made Fri 23 Dec 2022 11:04:26 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu:
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
MAINTAINERS: Add 9p test client to section "virtio-9p"
9pfs: Fix some return statements in the synth backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These jobs use their own "script:" section and thus do not profit from
the global "--disable-docs" from the template. While we're at it, disable
also some GUI front ends here since we do not gain any additional test
coverage by compiling those here again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221208135945.99975-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-7-alex.bennee@linaro.org>
The current docker image for cross compiling hexagon guests
is manually built since it takes >2 hours to build from source.
This patch:
1. Solves the above issue by using the prebuilt clang
toolchain hosted on CodeLinaro [1] and maintained by QUIC [2].
2. The dockerfile is also switched from multi-stage to single stage
build to allow the CI docker engine to reuse the layer cache.
3. Re-enables the hexagon-cross-container job to be always run in
CI and makes it a non-optional dependency for the
build-user-hexagon job.
The changes for 1 & 2 together bring down the build time to
~3 minutes in GitLab CI when cache is reused and ~9 minutes
when cache cannot be reused.
[1]: https://github.com/CodeLinaro/hexagon-builder
[2]: https://github.com/quic/toolchain_for_hexagon/releases/
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
[AJB: also tweak MAINTAINERS, remove QEMU_JOB_ONLY_FORKS and comment]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221219144354.11659-1-quic_mthiyaga@quicinc.com>
Message-Id: <20221221090411.1995037-6-alex.bennee@linaro.org>
The latest hexagon compiler picks up that we never consume wcount.
Given the name of the #define that rcount checks against is WCOUNT_MAX
I figured the check just got missed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-5-alex.bennee@linaro.org>
Our CI system echos the lines it executes but not the expansions. For
the sake of a line of extra verbosity during the configure phase lets
echo the invocation of script to stdout as well as the log when on CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-4-alex.bennee@linaro.org>
The verbosity adds a lot of unnecessary output to the CI logs which
end up getting truncated anyway. We can always extract information
from the meson test logs on a failure and for the custom runners its
generally easier to re-create failures anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221221090411.1995037-3-alex.bennee@linaro.org>
After configuring with --target-list=hexagon-linux-user
running `make check-tcg` just prints the following:
```
make: Nothing to be done for 'check-tcg'
```
In the probe_target_compiler function, the 'break'
command is used incorrectly. There are no lexically
enclosing loops associated with that break command which
is an unspecfied behaviour in the POSIX standard.
The dash shell implementation aborts the currently executing
loop, in this case, causing the rest of the logic for the loop
in line 2490 to be skipped, which means no Makefiles are
generated for the tcg target tests.
Fixes: c3b570b5a9 (configure: don't enable
cross compilers unless in target_list)
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://patchew.org/QEMU/20221207082309.9966-1-quic._5Fmthiyaga@quicinc.com/
Message-Id: <20221207082309.9966-1-quic_mthiyaga@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221221090411.1995037-2-alex.bennee@linaro.org>
xxxat() APIs are only available on POSIX platforms. For future
extension to Windows, let's replace the direct call to xxxat()
APIs with a wrapper.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-4-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
These are not used anywhere in the source tree. Drop them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221219102022.2167736-3-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Windows does not have <sys/xattr.h>.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-2-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The 9p test cases use a dedicated, lite-weight 9p client implementation
(using virtio transport) under tests/qtest/libqos/ to communicate with
QEMU's 9p server.
It's already there for a long time. Let's officially assign it to 9p
maintainers.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <E1ozhlV-0007BU-0g@lizzy.crudebyte.com>
The qemu_v9fs_synth_mkdir() and qemu_v9fs_synth_add_file() functions
currently return a positive errno value on failure. This causes
checkpatch.pl to spit several errors like the one below:
ERROR: return of an errno should typically be -ve (return -EAGAIN)
+ return EAGAIN;
Simply change the sign. This has no consequence since callers
assert() the returned value to be equal to 0.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <166930551818.827792.10663674346122681963.stgit@bahia>
[C.S.: - Resolve conflict with 66997c42e0. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY6M//RYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkaNABAKfQ/zpg2ugr/SmC7Ee9tnFNxDrq
JsNw+roXpUZvnkUZAQCMRm4BxfaXhXikRaSL2ZfGRtybKXki5o3Ez+rLxISiAg==
=gRo7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-12-21:
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
# gpg: Signature made Wed 21 Dec 2022 17:18:53 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu:
target/ppc: Check DEXCR on hash{st, chk} instructions
target/ppc: Implement the DEXCR and HDEXCR
hw/ppc/e500: Move comment to more appropriate place
hw/ppc/e500: Resolve variable shadowing
hw/ppc/e500: Prefer local variable over qdev_get_machine()
hw/ppc/virtex_ml507: Prefer local over global variable
target/ppc/mmu_common: Fix table layout of "info tlb" HMP command
target/ppc/mmu_common: Log which effective address had no TLB entry found
hw/ppc/spapr: Reduce "vof.h" inclusion
hw/ppc/vof: Do not include the full "cpu.h"
target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h"
hw/ppc/e500: Add Freescale eSDHC to e500plat
hw/sd/sdhci: Support big endian SD host controller interfaces
MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds checks to the hashst and hashchk instructions to only execute if
enabled by the relevant aspect in the DEXCR and HDEXCR.
This behaviour is guarded behind TARGET_PPC64 since Power10 is
currently the only implementation which has the DEXCR.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Message-Id: <20221220042330.2387944-3-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Define the DEXCR and HDEXCR as special purpose registers.
Each register occupies two SPR indicies, one which can be read in an
unprivileged state and one which can be modified in the appropriate
priviliged state, however both indicies refer to the same underlying
value.
Note that the ISA uses the abbreviation UDEXCR in two different
contexts: the userspace DEXCR, the SPR index which can be read from
userspace (implemented in this patch), and the ultravisor DEXCR, the
equivalent register for the ultravisor state (not implemented).
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221220042330.2387944-2-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The TLB entries are set up in mmubooke_create_initial_mapping(), not in
booke206_page_size_to_tlb().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221216145709.271940-7-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assign to the outer variable instead which even saves some code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221216145709.271940-6-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-5-shentey@gmail.com>
[danielhb: remove linebreak in object_property_add_child()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's not leave developers in the dark where this log message comes
from.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently objects including "hw/ppc/spapr.h" are forced to be
target specific due to the inclusion of "vof.h" in "spapr.h".
"spapr.h" only uses a Vof pointer, so doesn't require the structure
declaration. The only place where Vof structure is accessed is in
spapr.c, so include "vof.h" there, and forward declare the structure
in "spapr.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-4-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
"vof.h" doesn't need the full "cpu.h" to get the target_ulong
definition, including "exec/cpu-defs.h" is enough.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-3-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
kvm_ppc.h is missing various declarations from "cpu.h":
target/ppc/kvm_ppc.h:128:40: error: unknown type name 'CPUPPCState'; did you mean 'CPUState'?
static inline int kvmppc_get_hypercall(CPUPPCState *env,
^~~~~~~~~~~
CPUState
include/qemu/typedefs.h:45:25: note: 'CPUState' declared here
typedef struct CPUState CPUState;
^
target/ppc/kvm_ppc.h:134:40: error: unknown type name 'PowerPCCPU'
static inline int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
^
target/ppc/kvm_ppc.h:285:38: error: unknown type name 'hwaddr'
hwaddr ptex, int n)
^
target/ppc/kvm_ppc.h:220:15: error: unknown type name 'target_ulong'
static inline target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
^
target/ppc/kvm_ppc.h:286:38: error: unknown type name 'ppc_hash_pte64_t'
static inline void kvmppc_read_hptes(ppc_hash_pte64_t *hptes,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Adds missing functionality to e500plat machine which increases the
chance of given "real" firmware images to access SD cards.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221018210146.193159-8-shentey@gmail.com>
[PMD: Simplify using create_unimplemented_device("esdhc")]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221101222934.52444-4-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some SDHCI IP can be synthetized in various endianness:
https://github.com/u-boot/u-boot/blob/v2021.04/doc/README.fsl-esdhc
- CONFIG_SYS_FSL_ESDHC_BE
ESDHC IP is in big-endian mode. Accessing ESDHC registers can be
determined by ESDHC IP's endian mode or processor's endian mode.
Our current implementation is little-endian. In order to support
big endianness:
- Rename current MemoryRegionOps as sdhci_mmio_le_ops ('le')
- Add an 'endianness' property to SDHCIState (default little endian)
- Set the 'io_ops' field in realize() after checking the property
- Add the sdhci_mmio_be_ops (big-endian) MemoryRegionOps.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221101222934.52444-3-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The maintainer is no longer being paid to maintain these components. All
maintainership work is being done in his personal time since the middle
of the 7.2 development cycle.
Change the status of PPC KVM CPUs, PPC TCG CPUs and the pSeries machine
to 'Odd Fixes', reflecting that the maintainer no longer has exclusive
time to dedicate to them. It'll also (hopefully) keep expectations under
check when/if these components are used in a customer product.
Cc: Cédric Le Goater <clg@kaod.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20221117153218.182835-1-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl
misc fixes, cleanups, documentation
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOi/OQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGCkH/j06y7PEDHfG1MnPoFQIEWKHPyU/FMUe1RCW
dRsfVmHZ8Jc1Jy4wVch461QpcIC+WL/Fshzh92G0hVDI2AWzJOxzpWQESmCphJJG
Olk/H/ort4ZIrwOynAHDKLzgltoTI91uao3UT7w67NumAgVYYW4Q9ObHm2G3Wmwc
fe763NmlObrNYYCIbJw/KiBLrk7M5LaMLPeoRGJefD4MYUAPXy/sUQt61VyuZpuG
xFAeDB7/76MXFKJVjccSnZfa8lihOJ5AlvCBTjjY5PbGl8+U1usdd3hOVComYb02
LW4sKLkxe5sycg/bFQdBLpz2lZVlMjpY9nd9YiumIrgLBv70Uf0=
=WyvK
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl
misc fixes, cleanups, documentation
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 21 Dec 2022 12:32:36 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
contrib/vhost-user-blk: Replace lseek64 with lseek
libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq
hw/virtio: Extract QMP related code virtio-qmp.c
hw/virtio: Extract config read/write accessors to virtio-config-io.c
hw/virtio: Constify qmp_virtio_feature_map_t[]
hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[]
hw/virtio: Rename virtio_ss[] -> specific_virtio_ss[]
hw/virtio: Add missing "hw/core/cpu.h" include
hw/cxl/device: Add Flex Bus Port DVSEC
hw/acpi: Rename tco.c -> ich9_tco.c
acpi/tests/avocado/bits: add mformat as one of the dependencies
docs/acpi/bits: document BITS_DEBUG environment variable
pci: drop redundant PCIDeviceClass::is_bridge field
remove DEC 21154 PCI bridge
vhost: fix vq dirty bitmap syncing when vIOMMU is enabled
acpi/tests/avocado/bits: add SPDX license identifiers for bios bits tests
include/hw: attempt to document VirtIO feature variables
vhost-user: send set log base message only once
vdpa: always start CVQ in SVQ mode if possible
vdpa: add shadow_data to vhost_vdpa
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Assorted cleanups to page locking.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmOiku4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9eawf+JeZRrzFIqQNCceOw
mdBcPhxBf56ncRbIM0jGj8cMnnWgNX46gsXZ3bYRlRT9ZshWiTY/mcWlPEevBBmX
yGtG48NfjPzHmo7WiodEFQJvID1+E6MfFO8GtieDZcJa0Md+2gbyFG5SlyAFaGgF
ql4Hzj22KkssMcisIVL4Gkrxp2FB8hyO123JXcg4sRp9sgZ1amDm9WbZ/DpLjc7y
C91Nur256JKrHEmTaCbJkgZRpOxhCV72MaR/pow/m7QpN0OcxIRPzhe+zJhumg5o
6/9Y9isnkZ0UrN0yX360dOAE7z/qLS/zj4cDbo08pzo44K7RJZRVuTosG8XAAjtP
veoeIA==
=vaRH
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20221220' of https://gitlab.com/rth7680/qemu into staging
Use interval trees for user-only vma mappings.
Assorted cleanups to page locking.
# gpg: Signature made Wed 21 Dec 2022 05:00:30 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20221220' of https://gitlab.com/rth7680/qemu:
accel/tcg: Restrict page_collection structure to system TB maintainance
accel/tcg: Factor tb_invalidate_phys_range_fast() out
accel/tcg: Rename tb_invalidate_phys_page_fast{,__locked}()
accel/tcg: Remove trace events from trace-root.h
accel/tcg: Restrict cpu_io_recompile() to system emulation
accel/tcg: Move remainder of page locking to tb-maint.c
accel/tcg: Move PageDesc tree into tb-maint.c for system
accel/tcg: Use interval tree for user-only page tracking
accel/tcg: Move page_{get,set}_flags to user-exec.c
accel/tcg: Drop PAGE_RESERVED for CONFIG_BSD
accel/tcg: Use interval tree for TARGET_PAGE_DATA_SIZE
accel/tcg: Use interval tree for TBs in user-only mode
accel/tcg: Rename page_flush_tb
util: Add interval-tree.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit da0bd74434 we refactored bdrv_drain_all_begin() to pull out
the non-polling part into bdrv_drain_all_begin_nopoll(). This change
broke record-and-replay, because the "return early if replay enabled"
check is now in the sub-function bdrv_drain_all_begin_nopoll(), and
so it only causes us to return from that function, and not from the
calling bdrv_drain_all_begin().
Fix the regression by checking whether replay is enabled in both
functions.
The breakage and fix can be tested via 'make check-avocado': the
tests/avocado/reverse_debugging.py:ReverseDebugging_X86_64.test_x86_64_pc
tests/avocado/reverse_debugging.py:ReverseDebugging_AArch64.test_aarch64_virt
tests were both broken by this.
Fixes: da0bd74434 ("block: Factor out bdrv_drain_all_begin_nopoll()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221220174638.2156308-1-peter.maydell@linaro.org
64bit off_t is already in use since build uses _FILE_OFFSET_BITS=64
already. Using lseek/off_t also makes it work with latest musl without
using _LARGEFILE64_SOURCE macro. This macro is implied with _GNU_SOURCE
when using glibc but not with musl.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
CC: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221218220740.315839-1-raj.khem@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
It seems there is no need to keep the inuse field signed and end up with
compiler warnings for sign-compare.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_queue_pop’:
libvhost-user.c:2763:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
2763 | if (vq->inuse >= vq->vring.num) {
| ^~
libvhost-user.c: In function ‘vu_queue_rewind’:
libvhost-user.c:2808:13: error: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Werror=sign-compare]
2808 | if (num > vq->inuse) {
| ^
Instead of casting the comparision to unsigned int, just make the inuse
field unsigned int in the fist place.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <20221219175337.377435-8-marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The monitor decoders are the only functions using the CONFIG_xxx
definitions declared in the target specific CONFIG_DEVICES header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-7-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
These config helpers use the target-dependent LD/ST API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These arrays are only accessed read-only, move them to .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Commit f3034ad71f ("qmp: decode feature & status bits in
virtio-status") did not guard all qmp_virtio_feature_map_t
arrays with the corresponding #ifdef'ry used in
qmp_decode_features(). Fix that and reduce the arrays scope
by declaring them static.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com>
Suggested-by: Richard Henderson <a class="moz-txt-link-rfc2396E" href="mailto:richard.henderson@linaro.org"><richard.henderson@linaro.org></a>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Since virtio_ss[] is added to specific_ss[], rename it as
specific_virtio_ss[] to make it clearer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio.c uses target_words_bigendian() which is declared in
"hw/core/cpu.h". Add the missing header to avoid when refactoring:
hw/virtio/virtio.c:2451:9: error: implicit declaration of function 'target_words_bigendian' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (target_words_bigendian()) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Flex Bus Port DVSEC was missing on type 3 devices which was blocking
RAS checks.[1]
Add the Flex Bus Port DVSEC to type 3 devices as per CXL 3.0 8.2.1.3.
[1] https://lore.kernel.org/linux-cxl/167096738875.2861540.11815053323626849940.stgit@djiang5-desk3.ch.intel.com/
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: qemu-devel@nongnu.org
Cc: linux-cxl@vger.kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Message-Id: <20221213-ira-flexbus-port-v2-1-eaa48d0e0700@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
tco.c contains the ICH9 implementation of its "total cost
of ownership". Rename it accordingly to emphasis this is
a part of the ICH9 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221212105115.2113-1-philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
mformat is needed by grub-mkrescue and hence, add this as one of the
dependencies to run bits tests. This avoids errors such as the following:
/var/tmp/acpi-bits-wju6tqoa.tmp/grub-inst-x86_64-efi/bin/grub-mkrescue: 360: mformat: not found
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221203132407.34539-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Debug specific actions can be enabled in bios bits acpi tests by passing
BITS_DEBUG in the environment variable while running the test. Document that.
CC: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221203132346.34479-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
and use cast to TYPE_PCI_BRIDGE instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221129101341.185621-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Code has not been used practically since its inception (2004)
f2aa58c6f4 UniNorth PCI bridge support
or maybe even earlier, but it was consuming contributors time
as QEMU was being rewritten.
Drop it for now. Whomever would like to actually
use the thing, can make sure it actually works/reintroduce
it back when there is a user.
PS:
I've stumbled upon this when replacing PCIDeviceClass::is_bridge
field with QOM cast to PCI_BRIDGE type. Unused DEC 21154
was the only one trying to use the field with plain PCIDevice.
It's not worth keeping the field around for the sake of the code
that was commented out 'forever'.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221129101341.185621-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When vIOMMU is enabled, the vq->used_phys is actually the IOVA not
GPA. So we need to translate it to GPA before the syncing otherwise we
may hit the following crash since IOVA could be out of the scope of
the GPA log size. This could be noted when using virtio-IOMMU with
vhost using 1G memory.
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Tested-by: Lei Yang <leiyang@redhat.com>
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221216033552.77087-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tobias Röhmel