QEMU currently truncates the mmap_offset field when sending
VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages. The struct
layout looks like this:
typedef struct VhostUserMemoryRegion {
uint64_t guest_phys_addr;
uint64_t memory_size;
uint64_t userspace_addr;
uint64_t mmap_offset;
} VhostUserMemoryRegion;
typedef struct VhostUserMemRegMsg {
uint32_t padding;
/* WARNING: there is a 32-bit hole here! */
VhostUserMemoryRegion region;
} VhostUserMemRegMsg;
The payload size is calculated as follows when sending the message in
hw/virtio/vhost-user.c:
msg->hdr.size = sizeof(msg->payload.mem_reg.padding) +
sizeof(VhostUserMemoryRegion);
This calculation produces an incorrect result of only 36 bytes.
sizeof(VhostUserMemRegMsg) is actually 40 bytes.
The consequence of this is that the final field, mmap_offset, is
truncated. This breaks x86_64 TCG guests on s390 hosts. Other guest/host
combinations may get lucky if either of the following holds:
1. The guest memory layout does not need mmap_offset != 0.
2. The host is little-endian and mmap_offset <= 0xffffffff so the
truncation has no effect.
Fix this by extending the existing 32-bit padding field to 64-bit. Now
the padding reflects the actual compiler padding. This can be verified
using pahole(1).
Also document the layout properly in the vhost-user specification. The
vhost-user spec did not document the exact layout. It would be
impossible to implement the spec without looking at the QEMU source
code.
Existing vhost-user frontends and device backends continue to work after
this fix has been applied. The only change in the wire protocol is that
QEMU now sets hdr.size to 40 instead of 36. If a vhost-user
implementation has a hardcoded size check for 36 bytes, then it will
fail with new QEMUs. Both QEMU and DPDK/SPDK don't check the exact
payload size, so they continue to work.
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201109174355.1069147-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
We should at least document what this machine is about.
Reviewed-by: Graeme Gregory <graeme@nuviainc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201104165254.24822-1-alex.bennee@linaro.org
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed filename mismatch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a link to the top of the sidebar in every docs page that takes the
user back to the source code in gitlab.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
The warning was printing an empty string if the bad sphinx-build
was not passed on the command line. Instead, always use the
path that was returned by find_program.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=s4KC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging
nvme pull 2 Nov 2020
# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0
* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
hw/block/nvme: fix queue identifer validation
hw/block/nvme: fix create IO SQ/CQ status codes
hw/block/nvme: fix prp mapping status codes
hw/block/nvme: report actual LBA data shift in LBAF
hw/block/nvme: add trace event for requests with non-zero status code
hw/block/nvme: add nsid to get/setfeat trace events
hw/block/nvme: reject io commands if only admin command set selected
hw/block/nvme: support for admin-only command set
hw/block/nvme: validate command set selected
hw/block/nvme: support per-namespace smart log
hw/block/nvme: fix log page offset check
hw/block/nvme: remove pointless rw indirection
hw/block/nvme: update nsid when registered
hw/block/nvme: change controller pci id
pci: allocate pci id for nvme
hw/block/nvme: support multiple namespaces
hw/block/nvme: refactor identify active namespace id list
hw/block/nvme: add support for sgl bit bucket descriptor
hw/block/nvme: add support for scatter gather lists
hw/block/nvme: harden cmb access
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sphinx 3.2 is pickier than earlier versions about the option:: markup,
and complains about our usage in qemu-option-trace.rst:
../../docs/qemu-option-trace.rst.inc:4:Malformed option description
'[enable=]PATTERN', should look like "opt", "-opt args", "--opt args",
"/opt args" or "+opt args"
In this file, we're really trying to document the different parts of
the top-level --trace option, which qemu-nbd.rst and qemu-img.rst
have already introduced with an option:: markup. So it's not right
to use option:: here anyway. Switch to a different markup
(definition lists) which gives about the same formatted output.
(Unlike option::, this markup doesn't produce index entries; but
at the moment we don't do anything much with indexes anyway, and
in any case I think it doesn't make much sense to have individual
index entries for the sub-parts of the --trace option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-3-peter.maydell@linaro.org
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
'qemu-img map' provides a way to determine which extents of an image
come from the top layer vs. inherited from a backing chain. This is
useful information worth exposing over NBD. There is a proposal to
add a QMP command block-dirty-bitmap-populate which can create a dirty
bitmap that reflects allocation information, at which point the
qemu:dirty-bitmap:NAME metadata context can expose that information
via the creation of a temporary bitmap, but we can shorten the effort
by adding a new qemu:allocation-depth metadata context that does the
same thing without an intermediate bitmap (this patch does not
eliminate the need for that proposal, as it will have other uses as
well).
While documenting things, remember that although the NBD protocol has
NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to
'metadata context', which is a more apt description of what is
actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting
metadata by passing one or more context names. So I also touched up
some existing wording to prefer the term 'metadata context' where it
makes sense.
Note that this patch does not actually enable any way to request a
server to enable this context; that will come in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-10-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.
Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
-----BEGIN PGP SIGNATURE-----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=ON5g
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
# gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: End quiescent sections when a BDS is deleted
qcow2: Skip copy-on-write when allocating a zero cluster
qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status()
qemu-img: add support for rate limit in qemu-img convert
qemu-img: add support for rate limit in qemu-img commit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add support for rate limit in qemu-img convert.
Signed-off-by: Zhengui <lizhengui@huawei.com>
Message-Id: <1603205264-17424-3-git-send-email-lizhengui@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
add support for rate limit in qemu-img commit.
Signed-off-by: Zhengui <lizhengui@huawei.com>
Message-Id: <1603205264-17424-2-git-send-email-lizhengui@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.
Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.
In all cases, the keyboard device enumerates correctly.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RNG module returns a byte of randomness when the Data Valid bit is
set.
This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.
A qtest featuring some simple randomness tests is included.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The emulated nvme device (hw/block/nvme.c) is currently using an
internal Intel device id.
Prepare to change that by allocating a device id under the 1b36 (Red
Hat, Inc.) vendor id.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The mapping rule system implemented in the last few patches is
extremely flexible, but not easy to use. Add a simple
'map' type as a sprinkling of sugar to make it easy.
e.g.
-o xattrmap=":map::user.virtiofs.:"
would be sufficient to prefix all xattr's
or
-o xattrmap=":map:trusted.:user.virtiofs.:"
would just prefix 'trusted.' xattr's and leave
everything else alone.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201023165812.36028-6-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a few examples of xattrmaps to the documentation.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201023165812.36028-5-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add an option to define mappings of xattr names so that
the client and server filesystems see different views.
This can be used to have different SELinux mappings as
seen by the guest, to run the virtiofsd with less privileges
(e.g. in a case where it can't set trusted/system/security
xattrs but you want the guest to be able to), or to isolate
multiple users of the same name; e.g. trusted attributes
used by stacking overlayfs.
A mapping engine is used with 3 simple rules; the rules can
be combined to allow most useful mapping scenarios.
The ruleset is defined by -o xattrmap='rules...'.
This patch doesn't use the rule maps yet.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201023165812.36028-2-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
virtiofsd cannot run in a container because CAP_SYS_ADMIN is required to
create namespaces.
Introduce a weaker sandbox mode that is sufficient in container
environments because the container runtime already sets up namespaces.
Use chroot to restrict path traversal to the shared directory.
virtiofsd loses the following:
1. Mount namespace. The process chroots to the shared directory but
leaves the mounts in place. Seccomp rejects mount(2)/umount(2)
syscalls.
2. Pid namespace. This should be fine because virtiofsd is the only
process running in the container.
3. Network namespace. This should be fine because seccomp already
rejects the connect(2) syscall, but an additional layer of security
is lost. Container runtime-specific network security policies can be
used drop network traffic (except for the vhost-user UNIX domain
socket).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201008085534.16070-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Avocado documentation referred returns 404 error.
Update the broken links.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201010080741.2932406-1-philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-13-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The option has never been mentioned in our documentation, it's been
deprecated since years, it's marked with QEMU_ARCH_I386 (which does
not make sense anymore since KVM is available on other architectures,
too), it does not do anything by default in upstream QEMU (since TCG
is the default here anyway), and we're spending too much precious time
each year discussing whether it makes sense to keep this option as a
nice suger or not... let's finally put an end on this and remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201020160504.62460-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current documentation is not too clear on the GETPC usage.
In particular, when used outside the top level helper function
it causes unexpected behavior.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-id: 20201015095147.1691-1-e.emanuelegiuseppe@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
-----BEGIN PGP SIGNATURE-----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=BOxw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-next-20201017' into staging
MIPS patches queue
. Fix some comment spelling errors
. Demacro some TCG helpers
. Add loongson-ext lswc2/lsdc2 group of instructions
. Log unimplemented cache opcode
. Increase number of TLB entries on the 34Kf core
. Allow the CPU to use dynamic frequencies
. Calculate the CP0 timer period using the CPU frequency
. Set CPU frequency for each machine
. Fix Malta FPGA I/O region size
. Allow running qtests when ROM is missing
. Add record/replay acceptance tests
. Update MIPS CPU documentation
. MAINTAINERS updates
CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/203931842https://travis-ci.org/github/philmd/qemu/builds/736491461https://cirrus-ci.com/build/6272264062631936https://app.shippable.com/github/philmd/qemu/runs/886/summary/console
# gpg: Signature made Sat 17 Oct 2020 14:59:53 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/mips-next-20201017: (44 commits)
target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64)
MAINTAINERS: Remove duplicated Malta test entries
MAINTAINERS: Downgrade MIPS Boston to 'Odd Fixes', fix Paul Burton mail
MAINTAINERS: Put myself forward for MIPS target
MAINTAINERS: Remove myself
docs/system: Update MIPS CPU documentation
tests/acceptance: Add MIPS record/replay tests
hw/mips: Remove exit(1) in case of missing ROM
hw/mips: Rename TYPE_MIPS_BOSTON to TYPE_BOSTON
hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE)
hw/mips: Simplify loading 64-bit ELF kernels
hw/mips/malta: Use clearer qdev style
hw/mips/malta: Move gt64120 related code together
hw/mips/malta: Fix FPGA I/O region size
target/mips/cpu: Display warning when CPU is used without input clock
hw/mips/cps: Do not allow use without input clock
hw/mips/malta: Set CPU frequency to 320 MHz
hw/mips/boston: Set CPU frequency to 1 GHz
hw/mips/cps: Expose input clock and connect it to CPU cores
hw/mips/jazz: Correct CPU frequencies
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201015220626.418-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This thread from a little over a year ago:
http://lists.wpkg.org/pipermail/sheepdog/2019-March/thread.html
states that sheepdog is no longer actively developed. The only mentioned
users are some companies who are said to have it for legacy reasons with
plans to replace it by Ceph. There is talk about cutting out existing
features to turn it into a simple demo of how to write a distributed
block service. There is no evidence of anyone working on that idea:
https://github.com/sheepdog/sheepdog/commits/master
No real commits to git since Jan 2018, and before then just some minor
technical debt cleanup.
There is essentially no activity on the mailing list aside from
patches to QEMU that get CC'd due to our MAINTAINERS entry.
Fedora packages for sheepdog failed to build from upstream source
because of the more strict linker that no longer merges duplicate
global symbols. Fedora patches it to add the missing "extern"
annotations and presumably other distros do to, but upstream source
remains broken.
There is only basic compile testing, no functional testing of the
driver.
Since there are no build pre-requisites the sheepdog driver is currently
enabled unconditionally. This would result in configure issuing a
deprecation warning by default for all users. Thus the configure default
is changed to disable it, requiring users to pass --enable-sheepdog to
build the driver.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201002113243.2347710-3-berrange@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Icelake-Client CPU models will be removed in the future.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-2-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword deprecation note, fix version in doc]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is currently unclear whether anybody is still using the 'moxie' CPU,
and there are no images for testing available this CPU, so the code has
likely bit-rotten in the course of time. When I asked the maintainer
for information, I did not get a reply within four weeks yet (see
https://lists.gnu.org/archive/html/qemu-devel/2020-08/msg07201.html).
The last Signed-off-by line from Anthony in our repo is from 2013,
so it seems like this code is rather unmaintained. Time to put it onto
the deprecation list to see whether somebody is still interested in this
code or whether we could remove it in a couple of releases.
Message-Id: <20200923171815.97801-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
