Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adds the -dfilter support to linux-user. There is a minor
checkpatch complaint about formatting which I've ignored for aesthetic
reasons.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.
Remove several target-specific hacks in linux-user/main.c.
For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.
For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind. Define
a workable value in linux-user/arm/, and also document why the
special case is required.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Almost every user of cpu_generic_init() checks for
returned NULL and then reports failure in a custom way
and aborts process.
Some users assume that call can't fail and don't check
for failure, though they should have checked for it.
In either cases cpu_generic_init() failure is fatal,
so instead of checking for failure and reporting
it various ways, make cpu_generic_init() report
errors in consistent way and terminate QEMU on failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The flags are arranged such that we can manipulate them either
a whole, or as individual bytes. The computation within
cpu_get_tb_cpu_state is now reduced to a single load and mask.
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change malloc/strdup/free to g_malloc/g_strdup/g_free in
util/envlist.c.
Remove NULL checks for pointers returned from g_malloc and g_strdup
as they exit in case of failure. Also, update calls to envlist_create
to reflect this.
Free array and array contents returned by envlist_to_environ using
g_free in bsd-user/main.c and linux-user/main.c.
Update comments to reflect change in semantics.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature. When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.
This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required. This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.
This is need for openrisc linux smp kernels to boot correctly.
Signed-off-by: Stafford Horne <shorne@gmail.com>
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set. We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Programs run under qemu-ppc64 on an x86_64 host currently segfault
if they use pthread_create() due to the adjustment made to the NIP in
commit bd6fefe71c.
This patch changes cpu_loop() to set the NIP back to the
pre-incremented value before calling do_syscall(), which causes the
correct address to be used for the new thread and corrects the fault.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We need to handle EXCP_DEBUG and EXCP_INTERRUPT.
We need to send signals to the guest using queue_signal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
"any" does not exist, therefore resulting in a misleading error message.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130145025.26475-1-david@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
HPPA is a (the) stack-grows-up target, and supporting that requires
rearranging how we compute addresses while laying out the initial
program stack. In addition, hppa32 requires 64-byte stack alignment
so parameterize that as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twidle.net>
[laurent: modified to clear Z on overflow, as found with risu]
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-30-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <1467054136-10430-29-git-send-email-cota@braap.org>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Version 2.0 of the semihosting specification introduces new trap
instructions for AArch32: HLT 0xF000 for A32 and HLT 0x3C for T32.
Implement these (in the same way we implement the existing HLT
semihosting trap for A64).
The old traps via SVC and BKPT are unaffected.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476792973-18508-1-git-send-email-peter.maydell@linaro.org
The output string QEMU with "--version" is very long, it does
not fit into a normal line of a terminal window anymore. By
putting the copyright information on a separate line instead,
the output looks much nicer.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Array mips_syscall_args[] determines number of arguments for each
syscall on Mips32. It wasn't updated with newer syscalls. Also,
preadv and pwritev have 5 arguments, not 6.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will serve as the base for async_safe_run_on_cpu. Because
start_exclusive uses CPU_FOREACH, merge exclusive_lock with
qemu_cpu_list_lock: together with a call to exclusive_idle (via
cpu_exec_start/end) in cpu_list_add, this protects exclusive work
against concurrent CPU addition and removal.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CPU work core functions common between system and user-mode
emulation. User-mode does not use run_on_cpu, so do not implement it.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-10-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert pthread_mutex_t and pthread_cond_t to QemuMutex and QemuCond.
This will allow to make some locks and conditional variables common
between user and system mode emulation.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-7-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of assuming in queue_signal() that all callers are passing
a siginfo structure which uses the _sifields._sigfault part of the
union (and thus a si_type of QEMU_SI_FAULT), make callers pass
the si_type they require in as an argument.
[RV adjusted to apply]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
64 bit user mode doesn't work for the e5500 core because the MSR_CM bit is
not set which enables the 64 bit mode for this MMU model. Memory addresses
are truncated to 32 bit, which results in "Invalid data memory access"
error messages. Fix it by setting the MSR_CM bit for this MMU model.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Display an exception number, generally defined as an hexadecimal
number (for instance, EXCP_HLT is 0x10001).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Other archs don't do it, some programs catch signals just fine
and those dumps just clutter the output. Keep the dumps for cases
that aren't supposed to happen such as unknown codes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The usermode "translate" code generates an error code value that
has the "is_write" bit set, which causes our switch/case to miss
and display "Invalid segfault errno" and a spurrious second state
dump. Fix it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
This patch implements read and write access rules for Mips floating
point control and status register (FCR31). The change can be divided
into following parts:
- Add fields that will keep FCR31's R/W bitmask in procesor
definitions and processor float_status structure.
- Add appropriate value for FCR31's R/W bitmask for each supported
processor.
- Add function for setting snan_bit_is_one, and integrate it in
appropriate places.
- Modify handling of CTC1 (case 31) instruction to use FCR31's R/W
bitmask.
- Modify handling user mode executables for Mips, in relation to the
bit EF_MIPS_NAN2008 from ELF header, that is in turn related to
reading and writing to FCR31.
- Modify gdb behavior in relation to FCR31.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Recent server processors use the Hypervisor Emulation Assistance
interrupt for illegal instructions and *some* type of SPR accesses.
Also the code was always generating inval instructions even for priv
violations due to setting the wrong flags
Finally, the checking for PR/HV was open coded everywhere.
This reworks it all, using little helper macros for checking, and
adding the HV interrupt (which gets converted back to program check
in the slow path of excp_helper.c on CPUs that don't want it).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When qemu_set_log_filename() detects an invalid file name, it reports
an error, closes the log file (if any), and starts logging to stderr
(unless daemonized or nothing is being logged).
This is wrong. Asking for an invalid log file on the command line
should be fatal. Asking for one in the monitor should fail without
messing up an existing logfile.
Fix by converting qemu_set_log_filename() to Error. Pass it
&error_fatal, except for hmp_logfile report errors.
This also permits testing without a subprocess, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
In fork_end(), we must fix the list of current CPUs to match the fact
that the child of the fork has only one thread. Unfortunately we were
removing the wrong CPUs from the list, which meant that if the child
subsequently did an exclusive operation it would deadlock in
start_exclusive() waiting for a sibling CPU which didn't exist.
In particular this could cause hangs doing git submodule init
operations, as reported in https://bugs.launchpad.net/qemu/+bug/955379
comment #47.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As host signals are now blocked whenever guest signals are blocked, the
queue of realtime signals is now in Linux. The QEMU queue is now
redundant and can be removed. (We already did not queue non-RT signals, and
none of the calls to queue_signal() except the one in host_signal_handler()
pass an RT signal number.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All syscall exits on microblaze result in r14 being equal to the
PC we return to, because the kernel syscall exit instruction "rtbd"
does this. (This is true even for sigreturn(); note that r14 is
not a userspace-usable register as the kernel may clobber it at
any point.)
Emulate the setting of r14 on exit; this isn't really a guest
visible change for valid guest code because r14 isn't reliably
observable anyway. However having the code and the comment helps
to explain why it's ok for the ERESTARTSYS handling not to undo
the changes to r14 that happen on syscall entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples logging further from config-target.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing big-endian linux-user mode, set both the CPSR.E and SCTLR.E0E
bits. This sets big-endian mode for data accesses.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
Set the default to the latest CPU version to have the
largest set of available features.
It is also really needed in little-endian mode because
POWER7 is not really supported in this mode and some distros
(at least debian) generate POWER8 code for their ppc64le target.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813698
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Notice raise and bpt, decoding the constants embedded in the
nop addil instruction in the x0 slot.
[rth: Generalize TILEGX_EXCP_OPCODE_ILL to TILEGX_EXCP_SIGNAL.
Drop validation of signal values.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443243635-4886-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The system mode binaries provide a similar alias
and it makes common options like --version and --help
work as expected.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As suggested by Laurent, use EXIT_SUCCESS and EXIT_FAILURE from
stdlib.h instead of numeric values.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds better support for diagnosing option
parser errors. The previous implementation just printed
the usage text and exited when a bad option or argument
was found. This made it very difficult to determine why
the usage was being displayed and it was doubly confusing
for cases like '--help' (it wasn't clear that --help was
actually an error).
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This option is already available on the system mode
binaries. It would be better if long options were
supported (i.e. --help), but this is okay for now.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:
. = 0x100
.globl _start
_start:
/* Cause a 0x600 */
li 3,0x1
stwcx. 3,0,3
1: b 1b
. = 0x600
1: b 1b
Built into something we can load as a BIOS image:
gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin
Run with:
qemu-system-ppc64 -nographic -bios test.bin
Shows an incorrect SRR0 (points at the li):
SRR0 0000000000000100
With the patch we get the correct SRR0:
SRR0 0000000000000104
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.
[rth: Moved all of the implementation of atomic instructions to a later patch.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).
Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qemu-linux-user, when calling gethostbyname2(),
it was hanging in .__res_nmkquery.
(gdb) bt
0 in .__res_nmkquery () from /lib64/libresolv.so.2
1 in .__libc_res_nquery () from /lib64/libresolv.so.2
2 in .__libc_res_nsearch () from /lib64/libresolv.so.2
3 in ._nss_dns_gethostbyname3_r () from /lib64/libnss_dns.so.2
4 in ._nss_dns_gethostbyname2_r () from /lib64/libnss_dns.so.2
5 in .gethostbyname2_r () from /lib64/libc.so.6
6 in .gethostbyname2 () from /lib64/libc.so.6
.__res_nmkquery() is:
...
do { RANDOM_BITS (randombits); } while ((randombits & 0xffff) == 0);
...
<.__res_nmkquery+112>: mftbl r11
<.__res_nmkquery+116>: clrlwi r10,r11,16
<.__res_nmkquery+120>: cmpwi cr7,r10,0
<.__res_nmkquery+124>: beq cr7,<.__res_nmkquery+112>
but as mftbl (Move From Time Base Lower) is not implemented,
r11 is always 0, so we have an infinite loop.
This patch fills the Time Base register with cpu_get_real_ticks().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alexander Graf <agraf@suse.de>
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: Thierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is a nop for user mode, so just remove them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1426496617-10702-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New threads always point at the same env which is incorrect and usually
leads to a crash.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
start/end_exclusive() need be pairs, except the start_exclusive() in
stop_all_tasks() which is only used by force_sig(), which will be abort.
So at present, start_exclusive() in stop_all_task() need not be paired.
queue_signal() may call force_sig(), or return after kill pid (or queue
signal). If could return from queue_signal(), stop_all_task() would not
be called in time, the next end_exclusive() would be issue.
So in arm_kernel_cmpxchg64_helper() for ARM, need remove end_exclusive()
after queue_signal(). The related commit: "97cc756 linux-user: Implement
new ARM 64 bit cmpxchg kernel helper".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When support was added for TrustZone to ARM CPU emulation, we failed
to correctly update the support for the linux-user implementation of
the get/set_tls syscalls. This meant that accesses to the TPIDRURO
register via the syscalls were always using the non-secure copy of
the register even if native MRC/MCR accesses were using the secure
register. This inconsistency caused most binaries to segfault on startup
if the CPU type was explicitly set to one of the TZ-enabled ones like
cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is
not affected.)
Use access_secure_reg() to determine whether we should be using
the secure or the nonsecure copy of TPIDRURO when emulating these
syscalls.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com
[PMM: rewrote commit message to more clearly explain the issue
and its consequences.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was the only caller of cpu_init() that was not checking for NULL
yet.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In main.c, all SIG* should be TARGET_SIG*, since the relevant functions
(queue_signal() and gdb_handlesig()) expect TARGET_SIG*.
The corresponding vi command is "1,$ s/\<SIG/TARGET_SIG/g".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the m68k cpu_loop() use get_user_u16 to read the immediate for
the simcall rahter than lduw, to bring it into line with how other
archs do it and to remove another user of the ldl family of functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-8-git-send-email-peter.maydell@linaro.org
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
Replace the 20Kc original MIPS64 ISA processor used for 64-bit user
emulation with the 5KEf processor that implements the MIPS64r2 ISA,
complementing the choice of the 24Kf processor for 32-bit emulation.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure
and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-25-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On AArch64 the si_addr field of siginfo_t is truncated to 32 bits
because the fault address passes through an uint32_t variable.
Follow Peters suggestion and drop the uint32_t variable
since its only used once in the Aarch64 loop.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces the -seed command line option and the
QEMU_RAND_SEED environment variable for setting the random seed, which
is used for the AT_RANDOM ELF aux entry.
Signed-off-by: Magnus Reftel <reftel@spotify.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The default, 970fx, doesn't support MSR_LE. So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: Alexander Graf <agraf@suse.de>
OABI arm used a software interrupt(0xef9f0001) for breakpoints.
Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI.
Apparently Steel Bank Common Lisp still uses the swi instruction.
This is the kernel implementation:
http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598
Signed-off-by: Hunter Laux <hunterlaux@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The size and register information are encoded into the reserve_info field
of CPU state in the store conditional translation code. Specifically, the
size is shifted left by 5 bits (see target-ppc/translate.c gen_conditional_store).
The user-mode store conditional code erroneously extracts the size by ANDing
with a 4 bit mask; this breaks if size >= 16.
Eliminate the mask to make the extraction of size mirror its encoding.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
With the next patch, these need to be correct or VM86 tasks
have the wrong CPL. The flags are basically what the Intel VMX
documentation say is mandatory for entry into a VM86 guest.
For consistency, SMM ought to have the same flags except with
CPL=0.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.
This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For AArch32 exceptions, the only information provided about
the cause of an exception is the individual exception type (data
abort, undef, etc), which we store in cs->exception_index. For
AArch64, the CPU provides much more detail about the cause of
the exception, which can be found in the syndrome register.
Create a set of fields in CPUARMState which must be filled in
whenever an exception is raised, so that exception entry can
correctly fill in the syndrome register for the guest.
This includes the information which in AArch32 appears in
the DFAR and IFAR (fault address registers) and the DFSR
and IFSR (fault status registers) for data aborts and
prefetch aborts, since if we end up taking the MMU fault
to AArch64 rather than AArch32 this will need to end up
in different system registers.
This patch does a refactoring which moves the setting of the
AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception
is raised to the point where it is taken. (This is no change
for cores with an MMU, retains the existing clearly incorrect
behaviour for ARM946 of trashing the MP access permissions
registers which share the c5_data and c5_insn state fields,
and has no effect for v7M because we don't implement its
MPU fault status or address registers.)
As a side effect of the cleanup we fix a bug in the AArch64
linux-user mode code where we were passing a 64 bit fault
address through the 32 bit c6_data/c6_insn fields: it now
goes via the always-64-bit exception.vaddress.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: set minimum kernel version to 2.6.32
linux-user: correct handling of break exception for MIPS
linux-user: translate signal number on return from sigtimedwait
linux-user: Implement sendmmsg syscall
linux-user: Fix getresuid, getresgid if !USE_UID16
linux-user: Don't use UID16 on AArch64
linux-user: AArch64: Implement SA_RESTORER for signal handlers
linux-user/signal.c: Fix AArch64 big-endian FP register restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
Exception with break instruction has not been correctly propagated as
SIGTRAP. This resolves crash issues with examples that use break
instruction on MIPS.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Emilio G. Cota
Alex Bennée
Richard Henderson
Igor Mammedov
Eric Blake
Stefan Hajnoczi
Saurav Sachidanand
Stafford Horne
Peter Maydell
Sam Bobroff
David Hildenbrand
Marek Vasut
Artyom Tarasenko
Laurent Vivier
Thomas Huth
Aleksandar Markovic
Daniel P. Berrange
Lluís Vilanova
Paolo Bonzini
Sergey Fedorov
Benjamin Herrenschmidt
Michael Walle
Peter Crosthwaite
Markus Armbruster
Timothy E Baldwin
Fam Zheng
Eduardo Habkost
Veronia Bahaa
Peter Crosthwaite
Laurent Vivier
Christopher Covington
Chen Gang
Meador Inge
Riku Voipio
Anton Blanchard
Chen Gang
Stefan Weil
KONRAD Frederic
Andrew Bennett
Thierry Bultel
Leon Alrae
Chen Gang S
Mikhail Ilyin
Maciej W. Rozycki
Fabian Aggeler
Magnus Reftel
Jincheng Miao
Hunter Laux
Tom Musta
Doug Kwan
Kevin O'Connor
Andreas Färber
Petar Jovanovic
Janne Grunau