For some reason nbd_client_thread() has a do..while loop which can never
loop, the condition is bogus because we would take a goto instead. Drop
the loop.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The QEMU build depends on Python so make it an explicit requirement.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix a leak of a file descriptor due to missing closesocket() calls
in error paths in net_socket_listen_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix a leak of a file descriptor in error exit paths in
gdbserver_open().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The test for whether the host CPU is supported had several problems:
* the attempt to fall back to TCI was done as a duplicate
test, very late (so "--cpu foo" would fail early but "--cpu unicore32"
would fail late, differently, and after configure had already
printed a lot of output)
* a number of CPUs only supported as guests were included in the
list of CPUs we would accept as valid hosts, which would result
in a late compile failure on those systems rather than a
configure failure or fallback to TCI
* bailing out for an unsupported CPU happened before the main
option parsing, so "configure --help" wouldn't work
Fix these by folding the setting of ARCH into the first test for
supported host CPU, removing spurious guest-only CPU names from it,
and moving the "fall back to TCI" code earlier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Replace
error_report("DEVICE-NAME: MESSAGE");
by just
error_report("MESSAGE");
in block device init functions.
DEVICE-NAME is bogus in some cases: it's "scsi-disk" for device
scsi-hd and scsi-cd, "virtio-blk-pci" for virtio-blk-s390, and
"usb-msd" for usb-storage.
There is no real need to put a device name in the message, because
error_report() points to the offending command line option already:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb -device virtio-blk-pci
upstream-qemu: -device virtio-blk-pci: virtio-blk-pci: drive property not set
upstream-qemu: -device virtio-blk-pci: Device 'virtio-blk-pci' could not be initialized
And for a monitor command, it's obvious anyway:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb
(qemu) device_add virtio-blk-pci
virtio-blk-pci: drive property not set
Device 'virtio-blk-pci' could not be initialized
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit 6daf194d got rid of them, but Hans and Gerd added some more
lately. Tracked down with this Coccinelle semantic patch:
@r@
expression fmt;
position p;
@@
error_report(fmt, ...)@p
@script:python@
fmt << r.fmt;
p << r.p;
@@
if "\\n" in str(fmt):
print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove the default compiled out tunnel channel, add the always available
cursor channel. Optimally the man page would depend on compiled in
options, but that's harder to do.
RHBZ: 688586
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* aneesh/for-upstream:
hw/9pfs: Add support to use named socket for proxy FS
hw/9pfs: man page for proxy helper
hw/9pfs: Documentation changes related to proxy fs
hw/9pfs: Proxy getversion
hw/9pfs: xattr interfaces in proxy filesystem driver
hw/9pfs: File ownership and others
hw/9pfs: Add stat/readlink/statfs for proxy FS
hw/9pfs: Create other filesystem objects
hw/9pfs: Open and create files
hw/9pfs: File system helper process for qemu 9p proxy FS
hw/9pfs: Add new proxy filesystem driver
hw/9pfs: Add validation to {un}marshal code
hw/9pfs: Move pdu_marshal/unmarshal code to a seperate file
hw/9pfs: Move opt validation to FsDriver callback
* kraxel/usb.33:
usb-ohci: td.cbp incorrectly updated near page end
usb-host: properly release port on unplug & exit
usb-storage: cancel I/O on reset
Fix parse of usb device description with multiple configurations
The current code that updates the cbp value after a transfer looks like this:
td.cbp += ret;
if ((td.cbp & 0xfff) + ret > 0xfff) {
<handle page overflow>
because the 'ret' value is effectively added twice the check may fire too early
when the overflow hasn't happened yet.
Below is one of the possible changes that correct the behavior:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out port release into a separate function. Call release function
in exit notifier too. Add explicit call the USBDEVFS_RELEASE_PORT
ioctl, just closing the hub file handle seems not to be enougth. Make
sure we release the port before resetting the device, otherwise host
drivers will not re-attach.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting the usb-storage device we'll have to carefully cancel
and clear any requests which might be in flight, otherwise we'll confuse
the state machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add dummy register support for the cp15, CRn=c15 registers.
config_base_register and power_control_register currently
default to 0, but may have improved support after the QOM
CPU patches are finished.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ignore attempts to set the CPSR mode field to an invalid value.
This is UNPREDICTABLE, but we should not cpu_abort() for things
a malicious guest (or a confused user on the gdbstub interface)
can provoke.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid using cpu_single_env in bank_number() -- if we were
called via the gdb stub reading or writing the CPSR then
it is NULL and we will segfault if we take the cpu_abort().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A recent patch set from Avi break the dirty bitmap support of Xen. But
this is because xen_sync_dirty_bitmap will return an error for an
unhandled memory range (a0000 - bffff). However this is not a fatal
error, so we should just continue instead of aborting.
There is now an error printed when the Xen call failed.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* pmaydell/arm-devs.for-upstream:
add L2x0/PL310 cache controller device
arm: add dummy gic security registers
arm: Set frequencies for arm_timer
arm: add missing scu registers
hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine
hw/omap1.c: Drop unused includes
hw/omap1.c: Separate dpll_ctl from omap_mpu_state
hw/omap1.c: Separate PWT from omap_mpu_state
hw/omap1.c: Separate PWL from omap_mpu_state
hw/omap1.c: omap_mpuio_init() need not be public
hw/pl110.c: Add post-load hook to invalidate display
hw/pl181.c: Add save/load support
Add option to use named socket for communicating between proxy helper
and qemu proxy FS. Access to socket can be given by using command line
options -u and -g.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add proxy getversion to get generation number
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add interfaces to open and create files for proxy file system driver.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Provide root privilege access to QEMU 9p proxy filesystem using socket
communication.
Proxy helper is started by root user as:
~ # virtfs-proxy-helper -f|--fd <socket descriptor> -p|--path <path-to-share>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add new proxy filesystem driver to add root privilege to qemu process.
It needs a helper process to be started by root user.
Following command line can be used to utilize proxy filesystem driver
-virtfs proxy,id=<id>,mount_tag=<tag>,socket_fd=<socket-fd>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Move p9 marshaling/unmarshaling code to a separate file so that
proxy filesytem driver can use these calls. Also made marshaling
code generic to accept "struct iovec" instead of V9fsPDU.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This remove all conditional code from common code path and
make opt validation a FSDriver callback.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
[Peter Maydell: removed stray blank line at end]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement handling for the RAZ/WI gic security registers.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use qdev properties to allow board modelers to set the frequencies
for the sp804 timer. Each of the sp804's timers can have an
individual frequency. The timers default to 1MHz.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add power control register to a9mpcore
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When configuring the prefetch engine (and also when resetting from
a state where the prefetch engine was enabled) be careful to adhere
to the "unmap/change config fields/map" ordering, to avoid trying
to delete the wrong MemoryRegions. This fixes an assertion failure
in some cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We no longer use any of the lower bits of a ram_addr, so we might as well
use them for the io table index. This increases the number of potential
I/O handlers by a factor of 8.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Unlike ->readonly, ->readable is not inherited from aliase, so we can simply
query the memory region.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now that all mmio goes through MemoryRegions, we can convert
io_mem_opaque to be a MemoryRegion pointer, and remove the thunks
that convert from old-style CPU{Read,Write}MemoryFunc to MemoryRegionOps.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
