Avoid accessing QCryptoTLSCreds internals by using
the qcrypto_tls_creds_check_endpoint() helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The
new flag has the following semantics:
"
RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge
pages if applicable) is skipped: will bail out if not supported. When not
set, the OS will do the reservation, if supported for the memory type.
"
Allow passing it into:
- memory_region_init_ram_nomigrate()
- memory_region_init_resizeable_ram()
- memory_region_init_ram_from_file()
... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag.
Bail out if the flag is not supported, which is the case right now for
both, POSIX and win32. We will add Linux support next and allow specifying
RAM_NORESERVE via memory backends.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-9-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a critical failure scenario for migration that is hard to
diagnose from existing probes. Most likely it is caused by an error
from bdrv_flush(), but we're not logging the errno anywhere, hence
this new probe.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can detect disk migration in migrate_prepare, if disk migration
is enabled in COLO mode, we can directly report an error.and there
is no need to disable block migration at every checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
introduce optional sample-pages argument in calc-dirty-rate,
making sample page count per GB configurable so that more
accurate dirtyrate can be calculated.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <3103453a3b2796f929269c99a6ad81a9a7f1f405.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrapped a couple of long lines
Delay closing the listener until the cleanup hook at the end; mptcp
needs the listener to stay open while the other paths come in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a cleanup hook for incoming migration that gets called
at the end as a way for a transport to allow cleanup.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210602023506.3821293-1-lizhijian@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After yank feature was introduced in migration, whenever migration
is started using TLS, the following error happens in both source and
destination hosts:
(qemu) qemu-kvm: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
This happens because of a missing yank_unregister_function() when using
qio-channel-tls.
Fix this by also allowing TYPE_QIO_CHANNEL_TLS object type to perform
yank_unregister_function() in channel_close() and multifd_load_cleanup().
Also, inside migration_channel_connect() and
migration_channel_process_incoming() move yank_register_function() so
it only runs once on a TLS migration.
Fixes: b5eea99ec2 ("migration: Add yank feature", 2021-01-13)
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1964326
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Changes since v2:
- Dropped all references to ioc->master
- yank_register_function() and yank_unregister_function() now only run
once in a TLS migration.
Changes since v1:
- Cast p->c to QIOChannelTLS into multifd_load_cleanup()
Message-Id: <20210601054030.1153249-1-leobras.c@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes for a loadvm regression from Kevin,
some virtiofsd cleanups from Vivek and Mahmoud, and
some RDMA migration fixups from Li.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dIM2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210526a' into staging
Virtiofs, migration and hmp pull 2021-05-26
Fixes for a loadvm regression from Kevin,
some virtiofsd cleanups from Vivek and Mahmoud, and
some RDMA migration fixups from Li.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 26 May 2021 18:43:30 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210526a:
migration/rdma: source: poll cm_event from return path
migration/rdma: destination: create the return patch after the first accept
migration/rdma: Fix rdma_addrinfo res leaks
migration/rdma: cleanup rdma in rdma_start_incoming_migration error path
migration/rdma: Fix cm_event used before being initialized
tools/virtiofsd/fuse_opt.c: Replaced a malloc with GLib's g_try_malloc
tools/virtiofsd/buffer.c: replaced a calloc call with GLib's g_try_new0
virtiofsd: Set req->reply_sent right after sending reply
virtiofsd: Check EOF before short read
virtiofsd: Simplify skip byte logic
virtiofsd: get rid of in_sg_left variable
virtiofsd: Use iov_discard_front() to skip bytes
virtiofsd: Get rid of unreachable code in read
virtiofsd: Check for EINTR in preadv() and retry
hmp: Fix loadvm to resume the VM on success instead of failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
source side always blocks if postcopy is only enabled at source side.
users are not able to cancel this migration in this case.
Let source side have chance to cancel this migration
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210525080552.28259-4-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Typo fix
destination side:
$ build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server-migration.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5902,disable-ticketing -incoming rdma:192.168.1.10:8888
(qemu) migrate_set_capability postcopy-ram on
(qemu)
dest_init RDMA Device opened: kernel name rocep1s0f0 uverbs device name uverbs0, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs0, infiniband class device path /sys/class/infiniband/rocep1s0f0, transport: (2) Ethernet
Segmentation fault (core dumped)
(gdb) bt
#0 qemu_rdma_accept (rdma=0x0) at ../migration/rdma.c:3272
#1 rdma_accept_incoming_migration (opaque=0x0) at ../migration/rdma.c:3986
#2 0x0000563c9e51f02a in aio_dispatch_handler
(ctx=ctx@entry=0x563ca0606010, node=0x563ca12b2150) at ../util/aio-posix.c:329
#3 0x0000563c9e51f752 in aio_dispatch_handlers (ctx=0x563ca0606010) at ../util/aio-posix.c:372
#4 aio_dispatch (ctx=0x563ca0606010) at ../util/aio-posix.c:382
#5 0x0000563c9e4f4d9e in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:306
#6 0x00007fe96ef3fa9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#7 0x0000563c9e4ffeb8 in glib_pollfds_poll () at ../util/main-loop.c:231
#8 os_host_main_loop_wait (timeout=12188789) at ../util/main-loop.c:254
#9 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:530
#10 0x0000563c9e3c7211 in qemu_main_loop () at ../softmmu/runstate.c:725
#11 0x0000563c9dfd46fe in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:50
The rdma return path will not be created when qemu incoming is starting
since migrate_copy() is false at that moment, then a NULL return path
rdma was referenced if the user enabled postcopy later.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210525080552.28259-3-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
rdma_freeaddrinfo() is the reverse operation of rdma_getaddrinfo()
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210525080552.28259-2-lizhijian@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
the error path after calling qemu_rdma_dest_init() should do rdma cleanup
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210520081148.17001-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A segmentation fault was triggered when i try to abort a postcopy + rdma
migration.
since rdma_ack_cm_event releases a uninitialized cm_event in these case.
like below:
2496 ret = rdma_get_cm_event(rdma->channel, &cm_event);
2497 if (ret) {
2498 perror("rdma_get_cm_event after rdma_connect");
2499 ERROR(errp, "connecting to destination!");
2500 rdma_ack_cm_event(cm_event); <<<< cause segmentation fault
2501 goto err_rdma_source_connect;
2502 }
Refer to the rdma_get_cm_event() code, cm_event will be
updated/changed only if rdma_get_cm_event() returns 0. So it's okey to
remove the ack in error patch.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210519064740.10828-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The replication.h file is included from migration/colo.c and tests/unit/test-replication.c,
so it should be in include/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CONFIG_VFIO switch only works in target specific code. Since
migration/migration.c is common code, the #ifdef does not have
the intended behavior here. Move the related code to a separate
file now which gets compiled via specific_ss instead.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Message-Id: <20210414112004.943383-3-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We never read or write beyond the used_length of memory blocks when
migrating. Make this clearer by using offset_in_ramblock() consistently.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-11-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We actually want to print the used_length, against which we check.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-10-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works with the usable_length of a ram block and
does not expect this value to change at random points in time.
In the case of postcopy, relying on used_length is racy as soon as the
guest is running. Also, when used_length changes we might leave the
uffd handler registered for some memory regions, reject valid pages
when migrating and fail when sending the recv bitmap to the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Let's remember the original used_length in a separate variable and
use it in relevant postcopy code. Make sure to update it when we resize
during precopy, when synchronizing the RAM block sizes with the source.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-9-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add two new helper functions. This will come in come handy once we want to
handle ram block resizes while postcopy is active.
Note that ram_block_from_stream() will already print proper errors.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-8-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Added brackets in host_page_from_ram_block_offset
to cause uintptr_t to cast the sum, to fix armhf-cross build
In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when
synchronizing the RAM block state with the migration source), the resized
part would not get discarded. Let's perform that when being notified
about a resize while postcopy has been advised, but is not listening
yet. With precopy, the process is as following:
1. VM created
- RAM blocks are created
2. Incomming migration started
- Postcopy is advised
- All pages in RAM blocks are discarded
3. Precopy starts
- RAM blocks are resized to match the size on the migration source.
- RAM pages from precopy stream are loaded
- Uffd handler is registered, postcopy starts listening
4. Guest started, postcopy running
- Pagefaults get resolved, pages get placed
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-7-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.
Update the documentation. Postcopy will be handled separately.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Result @blocked is redundant. Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.
Since it was deprecated from the start, we can delete it without
the customary grace period. Do so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Starting from pss->page, ram_save_host_page() will check every page
and send the dirty pages up to the end of the current host page or
the boundary of used_length of the block. If the host page size is
a huge page, the step "check" will take a lot of time.
It will improve performance to use migration_bitmap_find_dirty().
Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G)
The time of ram_save_host_page() in the last round of ram saving:
before optimize: 9250us after optimize: 34us
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When the host page is a huge page and something is sent in the
current iteration, migration_rate_limit() should be executed.
If not, it can be omitted.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bulk stage is kind of weird: migration_bitmap_find_dirty() will
indicate a dirty page, however, ram_save_host_page() will never save it, as
migration_bitmap_clear_dirty() detects that it is not dirty.
We already fill the bitmap in ram_list_init_bitmaps() with ones, marking
everything dirty - it didn't used to be that way, which is why we needed
an explicit first bulk stage.
Let's simplify: make the bitmap the single source of thuth. Explicitly
handle the "xbzrle_enabled after first round" case.
Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right
now), there is now a slight change in behavior:
- Colo: When starting, it will be disabled (was implicitly enabled)
until the first round actually finishes.
- Free page hinting: When starting, XBZRLE will be disabled (was implicitly
enabled) until the first round actually finished.
- Snapshots: When starting, XBZRLE will be disabled. We essentially only
do a single run, so I guess it will never actually get disabled.
Postcopy seems to indirectly disable it in ram_save_page(), so there
shouldn't be really any change.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210216105039.40680-1-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename 'bs' to commonly used 'block' in migration/ram.c background
snapshot code.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-5-andrey.gruzdev@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This commit solves the issue with userfault_fd WP feature that
background snapshot is based on. For any never poluated or discarded
memory page, the UFFDIO_WRITEPROTECT ioctl() would skip updating
PTE for that page, thereby loosing WP setting for it.
So we need to pre-fault pages for each RAM block to be protected
before making a userfault_fd wr-protect ioctl().
Fixes: 278e2f551a (migration: support
UFFD write fault processing in ram_save_iterate())
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-4-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert:
Bodged ifdef __linux__ on ram_write_tracking_prepare, should really
go in a stub
The same thing as for incoming postcopy - we cannot deal with concurrent
RAM discards when using background snapshot feature in outgoing migration.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added missing qemu_fflush() on buffer file holding precopy device state.
Increased initial QIOChannelBuffer allocation to 512KB to avoid reallocs.
Typical configurations often require >200KB for device state and VMDESC.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Message-Id: <20210401092226.102804-2-andrey.gruzdev@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove dependency on qiochannel by removing yank_generic_iochannel and
letting migration and chardev use their own yank function for
iochannel.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
Commit 3eacf70bb5 neglected to fix this
for softmmu configs, which pull in migration's use of gnutls.
This fixes the following compilation failure on Arm-based Macs:
In file included from migration/multifd.c:23:
In file included from migration/tls.h:25:
In file included from include/io/channel-tls.h:26:
In file included from include/crypto/tlssession.h:24:
include/crypto/tlscreds.h:28:10: fatal error: 'gnutls/gnutls.h' file not found
#include <gnutls/gnutls.h>
^~~~~~~~~~~~~~~~~
1 error generated.
(as well as for channel.c and tls.c)
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20210320171221.37437-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Incoming enabled bitmaps are busy, because we do
bdrv_dirty_bitmap_create_successor() for them. But disabled bitmaps
being migrated are not marked busy, and user can remove them during the
incoming migration. Then we may crash in cancel_incoming_locked() when
try to remove the bitmap that was already removed by user, like this:
#0 qemu_mutex_lock_impl (mutex=0x5593d88c50d1, file=0x559680554b20
"../block/dirty-bitmap.c", line=64) at ../util/qemu-thread-posix.c:77
#1 bdrv_dirty_bitmaps_lock (bs=0x5593d88c0ee9)
at ../block/dirty-bitmap.c:64
#2 bdrv_release_dirty_bitmap (bitmap=0x5596810e9570)
at ../block/dirty-bitmap.c:362
#3 cancel_incoming_locked (s=0x559680be8208 <dbm_state+40>)
at ../migration/block-dirty-bitmap.c:918
#4 dirty_bitmap_load (f=0x559681d02b10, opaque=0x559680be81e0
<dbm_state>, version_id=1) at ../migration/block-dirty-bitmap.c:1194
#5 vmstate_load (f=0x559681d02b10, se=0x559680fb5810)
at ../migration/savevm.c:908
#6 qemu_loadvm_section_part_end (f=0x559681d02b10,
mis=0x559680fb4a30) at ../migration/savevm.c:2473
#7 qemu_loadvm_state_main (f=0x559681d02b10, mis=0x559680fb4a30)
at ../migration/savevm.c:2626
#8 postcopy_ram_listen_thread (opaque=0x0)
at ../migration/savevm.c:1871
#9 qemu_thread_start (args=0x5596817ccd10)
at ../util/qemu-thread-posix.c:521
#10 start_thread () at /lib64/libpthread.so.0
#11 clone () at /lib64/libc.so.6
Note bs pointer taken from bitmap: it's definitely bad aligned. That's
because we are in use after free, bitmap is already freed.
So, let's make disabled bitmaps (being migrated) busy during incoming
migration.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210322094906.5079-2-vsementsov@virtuozzo.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replaced various qemu_mutex_lock calls and their respective
qemu_mutex_unlock calls with QEMU_LOCK_GUARD macro. This simplifies
the code by eliminating the respective qemu_mutex_unlock calls.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-7-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If any error happens during multifd send thread creating (e.g. channel broke
because new domain is destroyed by the dst), multifd_tls_handshake_thread
may exit silently, leaving main migration thread hanging (ram_save_setup ->
multifd_send_sync_main -> qemu_sem_wait(&p->sem_sync)).
Fix that by adding error handling in multifd_tls_handshake_thread.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-3-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Function multifd_channel_connect() return "true" to indicate failure,
which is rather confusing. Fix that.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-2-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.
This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the alias mapping hash stores just strings of the target
objects internally. In further patches we'll be adding another member
which will need to be stored in the map so pass a copy of the whole
BitmapMigrationBitmapAlias QAPI struct into the map.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <fc5f27e1fe16cb75e08a248c2d938de3997b9bfb.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: adjust long lines]
Signed-off-by: Eric Blake <eblake@redhat.com>
Postcopy may also be advised for dirty-bitmap migration only, in which
case the remote page size will not be available and we'll instead read
bogus data, blocking migration with a mismatch error if the VM uses
hugepages.
Fixes: 58110f0acb ("migration: split common postcopy out of ram postcopy")
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210204163522.13291-1-s.reiter@proxmox.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
savevm, loadvm and delvm are some of the few HMP commands that have never
been converted to use QMP. The reasons for the lack of conversion are
that they blocked execution of the event thread, and the semantics
around choice of disks were ill-defined.
Despite this downside, however, libvirt and applications using libvirt
have used these commands for as long as QMP has existed, via the
"human-monitor-command" passthrough command. IOW, while it is clearly
desirable to be able to fix the problems, they are not a blocker to
all real world usage.
Meanwhile there is a need for other features which involve adding new
parameters to the commands. This is possible with HMP passthrough, but
it provides no reliable way for apps to introspect features, so using
QAPI modelling is highly desirable.
This patch thus introduces new snapshot-{load,save,delete} commands to
QMP that are intended to replace the old HMP counterparts. The new
commands are given different names, because they will be using the new
QEMU job framework and thus will have diverging behaviour from the HMP
originals. It would thus be misleading to keep the same name.
While this design uses the generic job framework, the current impl is
still blocking. The intention that the blocking problem is fixed later.
None the less applications using these new commands should assume that
they are asynchronous and thus wait for the job status change event to
indicate completion.
In addition to using the job framework, the new commands require the
caller to be explicit about all the block device nodes used in the
snapshot operations, with no built-in default heuristics in use.
Note that the existing "query-named-block-nodes" can be used to query
what snapshots currently exist for block nodes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-13-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: removed tests for now, the output ordering isn't
deterministic
Make snapshot deletion consistent with the snapshot save
and load commands by using a wrapper around the blockdev
layer. The main difference is that we get upfront validation
of the passed in device list (if any).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.
Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.
Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_params_check() has a number of error messages of the form
Parameter 'NAME' expects is invalid, it should be ...
Fix them to something like
Parameter 'NAME' expects a ...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-5-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cache_init() attempts to handle allocation failure. The two error
messages are garbage, as untested error messages commonly are:
Parameter 'cache size' expects Failed to allocate cache
Parameter 'cache size' expects Failed to allocate page cache
Fix them to just
Failed to allocate cache
Failed to allocate page cache
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-4-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) made the new parameter unsigned (QAPI type
'size', uint64_t in C). It neglected to update existing code, which
continues to use int64_t.
migrate_xbzrle_cache_size() returns the new parameter. Adjust its
return type.
QMP query-migrate-cache-size returns migrate_xbzrle_cache_size().
Adjust its return type.
migrate-set-parameters passes the new parameter to
xbzrle_cache_resize(). Adjust its parameter type.
xbzrle_cache_resize() passes it on to cache_init(). Adjust its
parameter type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-3-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introducing implementation of 'background' snapshot thread
which in overall follows the logic of precopy migration
while internally utilizes completely different mechanism
to 'freeze' vmstate at the start of snapshot creation.
This mechanism is based on userfault_fd with wr-protection
support and is Linux-specific.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-5-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In this particular implementation the same single migration
thread is responsible for both normal linear dirty page
migration and procesing UFFD page fault events.
Processing write faults includes reading UFFD file descriptor,
finding respective RAM block and saving faulting page to
the migration stream. After page has been saved, write protection
can be removed. Since asynchronous version of qemu_put_buffer()
is expected to be used to save pages, we also have to flush
migraion stream prior to un-protecting saved memory range.
Write protection is being removed for any previously protected
memory chunk that has hit the migration stream. That's valid
for pages from linear page scan along with write fault pages.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-4-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fixup pagefault.address cast for 32bit
Add new capability to 'qapi/migration.json' schema.
Update migrate_caps_check() to validate enabled capability set
against introduced one. Perform checks for required kernel features
and compatibility with guest memory backends.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed error when compiling migration/qemu-file.c with -Werror=maybe-uninitialized
as shown here:
../migration/qemu-file.c: In function 'qemu_get_buffer_in_place':
../migration/qemu-file.c:604:18: error: 'src' may be used uninitialized in this function [-Werror=maybe-uninitialized]
604 | *buf = src;
| ~~~~~^~~~~
cc1: all warnings being treated as errors
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210128130625.569900-1-wainersm@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When VM migrate VMState of configuration, the fields(name and capabilities)
of configuration having a flag of VMS_ALLOC need to allocate memory. If the
src doesn't free memory of capabilities in SaveState after save VMState of
configuration, or the dst doesn't free memory of name and capabilities in post
load of configuration, it may result in memory leak of name and capabilities.
We free memory in configuration_post_save and configuration_post_load func,
which prevents memory leak.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-3-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Register yank functions on sockets to shut them down.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <484c6a14cc2506bebedd5a237259b91363ff8f88.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of taking a list parameter and returning a new head at a
distance, just return the new item for the caller to insert into a
list via QAPI_LIST_PREPEND.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The following steps will cause qemu assertion failure:
- pause vm by executing 'virsh suspend'
- create external snapshot of memory and disk using 'virsh snapshot-create-as'
- doing the above operation again will cause qemu crash
The backtrace looks like:
at /build/qemu-5.0/migration/savevm.c:1401
at /build/qemu-5.0/migration/savevm.c:1453
When the first migration completes, bs->open_flags will set BDRV_O_INACTIVE
flag by bdrv_inactivate_all(), and during the second migration the
bdrv_inactivate_recurse assert that the bs->open_flags is already
BDRV_O_INACTIVE enabled which cause crash.
As Vladimir suggested, this patch makes migrate_prepare check the state of vm and
return error if it is in RUN_STATE_POSTMIGRATE state.
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <6b704294ad2e405781c38fb38d68c744@h3c.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reported-by: Li Zhang <li.zhang@cloud.ionos.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
bdrv_all_create_snapshot() can fails with some snapshots created,
so it's better to delete those snapshots before returns to the caller
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-3-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The snapshot in each bs is deleted at the beginning, so there is no need
to find the snapshot again.
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-2-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make qemu_start_incoming_migration local to migration/migration.c.
By using the runstate instead of a separate flag, vl need not do
anything to setup deferred incoming migration.
qmp_migrate_incoming also does not need the deferred_incoming flag
anymore, because "-incoming PROTOCOL" will clear the "once" flag
before the main loop starts. Therefore, later invocations of
the migrate-incoming command will fail with the existing
"The incoming migration has already been started" error message.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some very simple initialization routines can be nested in existing
subsystem-level functions, do that to simplify qemu_init.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123130.19656-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The following sequence may cause the VM abort during migration:
1. RUN_STATE_RUNNING,MIGRATION_STATUS_ACTIVE
2. before call migration_completion(), we send migrate_cancel
QMP command, the state machine is changed to:
RUN_STATE_RUNNING,MIGRATION_STATUS_CANCELLING
3. call migration_completion(), and the state machine is
switch to: RUN_STATE_RUNNING,MIGRATION_STATUS_COMPLETED
4. call migration_iteration_finish(), because the migration
status is COMPLETED, so it will try to set the runstate
to POSTMIGRATE, but RUNNING-->POSTMIGRATE is an invalid
transition, so abort().
The migration_completion() should not change the migration state
to COMPLETED if it is already changed to CANCELLING.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20201105091726.148-1-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When creating new tls client, the tioc->master will be referenced which results in socket
leaking after multifd_save_cleanup if we cancel migration.
Fix it by do object_unref() after tls client creation.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1605104763-118687-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove redundant blank line which is left by Commit 662770af7c,
also take this opportunity to remove redundant includes in dirtyrate.c.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604030281-112946-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the WITH_QEMU_LOCK_GUARD macro is added, the compiler cannot identify
that the statements in the macro must be executed. As a result, some variables
assignment statements in the macro may be considered as unexecuted by the compiler.
When the -Wmaybe-uninitialized capability is enabled on GCC9,the compiler showed warning:
migration/migration.c: In function ‘migrate_send_rp_req_pages’:
migration/migration.c:384:8: warning: ‘received’ may be used uninitialized in this function [-Wmaybe-uninitialized]
384 | if (received) {
| ^
Add a default value for 'received' to prevented the warning.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201111142203.2359370-6-kuhn.chenqun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu main loop could hang up forever when we enable TLS+Multifd.
The Src multifd_send_0 invokes tls handshake, it sends hello to sever
and wait response.
However, the Dst main qemu loop has been waiting recvmsg() for multifd_recv_1.
Both of Src and Dst main qemu loop are blocking and waiting for reponse which
results in hanging up forever.
Src: (multifd_send_0) Dst: (multifd_recv_1)
multifd_channel_connect migration_channel_process_incoming
multifd_tls_channel_connect migration_tls_channel_process_incoming
multifd_tls_channel_connect qio_channel_tls_handshake_task
qio_channel_tls_handshake gnutls_handshake
qio_channel_tls_handshake_task ...
qcrypto_tls_session_handshake ...
gnutls_handshake ...
... ...
recvmsg (Blocking I/O waiting for response) recvmsg (Blocking I/O waiting for response)
Fix this by offloadinig handshake work to a background thread.
Reported-by: Yan Jin <jinyan12@huawei.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604643893-8223-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
specifier ('%x').
Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201103112558.2554390-5-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
we should set ram_bulk_stage to false after ram_state_init,
otherwise the bitmap will be unused in migration_bitmap_find_dirty.
all pages in ram cache will be flushed to the ram of secondary guest
for each checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery. However it is also the 1st place to initiate the page
request from the main thread.
One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe. So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.
Postpone the wake up operation after the sync of faulted addresses.
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.
Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.
This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now. Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.
(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
a mark that when picking up 0c26781c09 we'd better have this one too; the real
fix will come later)
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OL0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging
migration pull: 2020-10-26
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Logically below race could trigger with the old code:
test program migration thread
------------ ----------------
wait_until('postcopy-pause')
postcopy_pause()
set_state('postcopy-pause')
do_postcopy_recover()
arm s->to_dst_file with new fd
release s->to_dst_file [1]
Here [1] could have released the just-installed recoverying channel. Then the
migration could hang without really resuming.
Instead, it should be very safe to release the fd before setting the state into
'postcopy-pause', because there's no reason for any other thread to touch it
during 'postcopy-active'.
Dave reported a very rare postcopy recovery hang that the migration-test
program waited for the migration to complete in migrate_postcopy_complete().
We do suspect it's the same thing that we're gonna fix here. Hard to tell.
However since we've noticed this, fix this irrelevant of the hang report.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that the faulted
threads can be served faster.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Maintain a list of faulted addresses on the destination host for which we're
waiting on. This is implemented using a GTree rather than a real list to make
sure even there're plenty of vCPUs/threads that are faulting, the lookup will
still be fast with O(log(N)) (because we'll do that after placing each page).
It should bring a slight overhead, but ideally that shouldn't be a big problem
simply because in most cases the requested page list will be short.
Actually we did similar things for postcopy blocktime measurements. This patch
didn't use that simply because:
(1) blocktime measurement is towards vcpu threads only, but here we need to
record all faulted addresses, including main thread and external
thread (like, DPDK via vhost-user).
(2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we
don't want to add that extra dependency on the kernel version since not
necessary. E.g., we don't need to know which thread faulted on which
page, we also don't care about multiple threads faulting on the same
page. But we only care about what addresses are faulted so waiting for a
page copying from src.
(3) blocktime measurement is not enabled by default. However we need this by
default especially for postcopy recover.
Another thing to mention is that this patch introduced a new mutex to serialize
the receivedmap and the page_requested tree, however that serialization does
not cover other procedures like UFFDIO_COPY.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is another layer wrapper for sending a page request to the source VM. The
new migrate_send_rp_message_req_pages() will be used elsewhere in coming
patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It'll be used in follow up patches to access more fields out of it. Meanwhile
fetch the userfaultfd inside the function.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Message-Id: <1603179176-5360-1-git-send-email-yubihong@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-9-git-send-email-yubihong@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-8-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-7-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-6-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-5-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-3-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-2-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit ef96e3ae96 in January 2019 removed the last user of the
VMSTATE_FLOAT64* macros. These were used by targets which defined
their floating point register file as an array of 'float64'.
We used to try to maintain a stricter distinction between
'float64' (a type for holding an integer representing an IEEE float)
and 'uint64_t', including having a debug option for 'float64' being
a struct and supposedly mandatory macros for converting between
float64 and uint64_t. We no longer think that's a usefully
strong distinction to draw and we allow ourselves to freely
assume that float64 really is just a 64-bit integer type, so
for new targets we would simply recommend use of the uint64_t type
for a floating point register file. The float64 type remains
as a useful way of documenting in the type signature of helper
functions and the like that they expect to receive an IEEE float
from the TCG generated code rather than an arbitrary integer.
Since the VMSTATE_FLOAT64* macros have no remaining users and
we don't recommend new code uses them, delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201022120830.5938-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A default value is provided for the variable 'bitmap_name' to avoid
a compiler warning.
The compiler showed the warning:
migration/block-dirty-bitmap.c:1090:13: warning: ‘bitmap_name’
may be used uninitialized in this function [-Wmaybe-uninitialized]
g_strlcpy(s->bitmap_name, bitmap_name, sizeof(s->bitmap_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201014114430.1898684-1-kuhn.chenqun@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
sectors_per_chunk is a 64 bit integer, but the calculation is done in 32
bits, leading to an overflow for coarse bitmap granularities.
If that results in the value 0, it leads to a hang where no progress is
made but send_bitmap_bits is constantly called with nr_sectors being 0.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20201021144456.1072-1-s.reiter@proxmox.com>
Fixes: b35ebdf07 migration: add postcopy migration of dirty bitmaps
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Use correct type for 8ULL, use () to avoid overflow]
Signed-off-by: Eric Blake <eblake@redhat.com>
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Querying could include both the start-time and the calc-time while at the measuring
state, allowing a caller to determine when they should expect to come back looking
for a result.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1601350938-128320-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Non-empty record/replay queue prevents saving and loading the VM state,
because it includes pending bottom halves and block coroutines.
But when the new VM state is loaded, we don't have to preserve the consistency
of the current state anymore. Therefore this patch just flushes the queue
allowing the coroutines to finish and removes checking for empty rr queue
for load_snapshot function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC 9.3.0 on Ubuntu complains:
In file included from /usr/include/string.h:495,
from /home/travis/build/huth/qemu/include/qemu/osdep.h:87,
from ../migration/global_state.c:13:
In function ‘strncpy’,
inlined from ‘global_state_store_running’ at ../migration/global_state.c:47:5:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error:
‘__builtin_strncpy’ specified bound 100 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... but we apparently really want to do a strncpy here - the size is already
checked with the assert() statement right in front of it. To silence the
warning, simply replace it with our strpadcpy() function.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> (two years ago)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200918103430.297167-4-thuth@redhat.com>
Message-Id: <20200925154027.12672-5-alex.bennee@linaro.org>
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eW0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging
Migration: Revert one patch for 068 fix
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200928a:
Revert "migration: Properly destroy variables on incoming side"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add trace points for multifd-tls for debug.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Similar like migration main thread, we need to do handshake
for each multifd thread.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd channel cleanup is need if multifd handshake failed,
let's extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-4-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migration_tls_client_create will be used in multifd-tls, let's
extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hostname is need in multifd-tls, save hostname into MigrationState.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af0).
Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200921144957.979989-1-lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200921094830.114028-1-dovmurik@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add trace_calls to make it easier to debug
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1600237327-33618-13-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic function fixup
Wording fixup in migration.json based on Eric's review
Implement calculate_dirtyrate() function.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-11-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement is_sample_period_valid() to check if the sample period is vaild and
do set_sample_page_period() to sleep specific time between sample actions.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-10-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In order to sample real RAM, skip ramblock with size below MIN_RAMBLOCK_SIZE
which is set as 128M.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-9-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Compare page hash results for recorded sampled page.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-8-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record hash results for each sampled page, crc32 is taken to calculate
hash results for each sampled length in TARGET_PAGE_SIZE.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAMBLOCK_FOREACH_MIGRATABLE is need in dirtyrate measure,
move the existing definition up into migration/ram.h
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add dirtyrate statistics functions to record/update dirtyrate info.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add RamblockDirtyInfo to store sampled page info of each ramblock.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-4-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
add DirtyRateStatus to denote calculating status.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic name fixup
Add get_dirtyrate_thread() functions to setup query-dirtyrate
framework.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-2-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_incoming_state_destroy(), we've got a few variables that aren't
destroyed properly, namely:
main_thread_load_event
postcopy_pause_sem_dst
postcopy_pause_sem_fault
rp_mutex
Destroy them properly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the migration folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-3-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
-----BEGIN PGP SIGNATURE-----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=gaaW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (65 commits)
block/qcow2-cluster: Add missing "fallthrough" annotation
block/nvme: Pair doorbell registers
block/nvme: Use generic NvmeBar structure
block/nvme: Group controller registers in NVMeRegs structure
file-win32: Fix "locking" option
iotests: Allow running from different directory
iotests: Test committing to overridden backing
iotests: Add test for commit in sub directory
iotests: Add filter mirror test cases
iotests: Add filter commit test cases
iotests: Let complete_and_wait() work with commit
iotests: Test that qcow2's data-file is flushed
block: Leave BDS.backing_{file,format} constant
block: Inline bdrv_co_block_status_from_*()
blockdev: Fix active commit choice
block: Drop backing_bs()
qemu-img: Use child access functions
nbd: Use CAF when looking for dirty bitmap
commit: Deal with filters
backup: Deal with filters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Places that use patterns like
if (bs->drv->is_filter && bs->file) {
... something about bs->file->bs ...
}
should be
BlockDriverState *filtered = bdrv_filter_bs(bs);
if (filtered) {
... something about @filtered ...
}
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently migration_tls_get_creds() adds the reference of creds
but there was no place to unref it. So the OBJECT(creds) will
never be freed and result in memory leak.
The leak stack:
Direct leak of 104 byte(s) in 1 object(s) allocated from:
#0 0xffffa88bd20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffa7f0cb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0x14b58cb in object_new_with_type qom/object.c:634
#3 0x14b597b in object_new qom/object.c:645
#4 0x14c0e4f in user_creatable_add_type qom/object_interfaces.c:59
#5 0x141c78b in qmp_object_add qom/qom-qmp-cmds.c:312
#6 0x140e513 in qmp_marshal_object_add qapi/qapi-commands-qom.c:279
#7 0x176ba97 in do_qmp_dispatch qapi/qmp-dispatch.c:165
#8 0x176bee7 in qmp_dispatch qapi/qmp-dispatch.c:208
#9 0x136e337 in monitor_qmp_dispatch monitor/qmp.c:150
#10 0x136eae3 in monitor_qmp_bh_dispatcher monitor/qmp.c:239
#11 0x1852e93 in aio_bh_call util/async.c:89
#12 0x18531b7 in aio_bh_poll util/async.c:117
#13 0x18616bf in aio_dispatch util/aio-posix.c:459
#14 0x1853f37 in aio_ctx_dispatch util/async.c:268
#15 0xffffa7f06a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
Since we're fine to use the borrowed reference when using the creds,
so just remove the object_ref() in migration_tls_get_creds().
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Message-Id: <20200722033228.71-1-yezhenyu2@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With blockdev, a BlockDriverState may not have a device name,
so using a node name is required as an alternative.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200827111606.1408275-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The vsock channel is more widely use in some new features, for example,
the Nitro/Enclave. It can also be used as the migration channel.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20200806074030.174-3-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, the only difference of tcp channel and unix channel in
migration/socket.c is the way to build SocketAddress, but socket_parse()
can handle these two types, so use it to instead of tcp_build_address()
and unix_build_address().
The socket-type channel can be further unified based on the up, this
would be helpful for us to add other socket-type channels.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20200806074030.174-2-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rename the macros to make them consistent with the MIGRATION_OBJ
macro name.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-51-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This migration parameter allows mapping block node names and bitmap
names to aliases for the purpose of block dirty bitmap migration.
This way, management tools can use different node and bitmap names on
the source and destination and pass the mapping of how bitmaps are to be
transferred to qemu (on the source, the destination, or even both with
arbitrary aliases in the migration stream).
While touching this code, fix a bug where bitmap names longer than 255
bytes would fail an assertion in qemu_put_counted_string().
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Noticed while reviewing the file for newer patches.
Fixes: b35ebdf076
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727203206.134996-1-eblake@redhat.com>
First, if only bitmaps postcopy is enabled (and not ram postcopy)
postcopy_pause_incoming crashes on an assertion
assert(mis->to_src_file).
And anyway, bitmaps postcopy is not prepared to be somehow recovered.
The original idea instead is that if bitmaps postcopy failed, we just
lose some bitmaps, which is not critical. So, on failure we just need
to remove unfinished bitmaps and guest should continue execution on
destination.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-18-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If target is turned off prior to postcopy finished, target crashes
because busy bitmaps are found at shutdown.
Canceling incoming migration helps, as it removes all unfinished (and
therefore busy) bitmaps.
Similarly on source we crash in bdrv_close_all which asserts that all
bdrv states are removed, because bdrv states involved into dirty bitmap
migration are referenced by it. So, we need to cancel outgoing
migration as well.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-17-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Bitmaps data is not critical, and we should not fail the migration (or
use postcopy recovering) because of dirty-bitmaps migration failure.
Instead we should just lose unfinished bitmaps.
Still we have to report io stream violation errors, as they affect the
whole migration stream.
While touching this, tighten code that was previously blindly calling
malloc on a size read from the migration stream, as a corrupted stream
(perhaps from a malicious user) should not be able to convince us to
allocate an inordinate amount of memory.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727194236.19551-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: typo fixes, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Keep bitmap state for disabled bitmaps too. Keep the state until the
end of the process. It's needed for the following commit to implement
bitmap postcopy canceling.
To clean-up the new list the following logic is used:
We need two events to consider bitmap migration finished:
1. chunk with DIRTY_BITMAP_MIG_FLAG_COMPLETE flag should be received
2. dirty_bitmap_mig_before_vm_start should be called
These two events may come in any order, so we understand which one is
last, and on the last of them we remove bitmap migration state from the
list.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
bdrv_enable_dirty_bitmap_locked() call does nothing, as if we are in
postcopy, bitmap successor must be enabled, and reclaim operation will
enable the bitmap.
So, actually we need just call _reclaim_ in both if branches, and
making differences only to add an assertion seems not really good. The
logic becomes simple: on load complete we do reclaim and that's all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-14-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
finish_lock is bad name, as lock used not only on process end.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move all state variables into one global struct. Reduce global
variable usage, utilizing opaque pointer where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No reasons to keep two public init functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200727194236.19551-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename dirty_bitmap_mig_cleanup to dirty_bitmap_do_save_cleanup, to
stress that it is on save part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename types to be symmetrical for load/save part and shorter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Using the _locked version of bdrv_enable_dirty_bitmap to bypass locking
is wrong as we do not already own the mutex. Moreover, the adjacent
call to bdrv_dirty_bitmap_enable_successor grabs the mutex.
Fixes: 58f72b965e9e1q
Cc: qemu-stable@nongnu.org # v3.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We shouldn't fail when finding an unnamed bitmap in a unnamed node or
node with auto-generated node name, as bitmap migration ignores such
bitmaps in the first place.
Fixes: 82640edb88
Fixes: 4ff5cc121b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200626130658.76498-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_fclose() could return error, f.e. if bdrv_co_flush() will return
the error.
This validation will become more important once we will start waiting of
asynchronous IO operations, started from bdrv_write_vmstate(), which are
coming soon.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Juan Quintela <quintela@redhat.com>
CC: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
"tmp.tls_hostname" and "tmp.tls_creds" allocated by migrate_params_test_apply()
is forgot to free at the end of qmp_migrate_set_parameters(). Fix that.
The leak stack:
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac52447fb in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1377)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c:165)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef(/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac5244893 in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1382)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef (/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: KeQian Zhu <zhukeqian1@huawei.com>
Reviewed-by: HaiLiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
real_dirty_pages becomes equal to total ram size after dirty log sync
in ram_init_bitmaps, the reason is that the bitmap of ramblock is
initialized to be all set, so old path counts them as "real dirty" at
beginning.
This causes wrong dirty rate and false positive throttling.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200622032037.31112-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This function returns a boolean success and we're returning -1;
lets just use the 'out' error path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 58b7c17e22 ("Disable mlock around incoming postcopy")
Buglink: https://bugs.launchpad.net/qemu/+bug/1885720
Message-Id: <20200701093557.130096-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
COLO will copy all memory in a RAM block, disable discarding of RAM.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RDMA will pin all guest memory (as documented in docs/rdma.txt). We want
to disable RAM block discards - however, to keep it simple use
ram_block_discard_is_required() instead of inhibiting.
Note: It is not sufficient to limit disabling to pin_all. Even when only
conditionally pinning 1 MB chunks, as soon as one page within such a
chunk was discarded and one page not, the discarded pages will be pinned
as well.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_rdma_registration_stop() uses the ERROR() macro to create, report
to stderr, and store an Error object. The stored Error object is
never used, and its memory is leaked.
Even where ERROR() doesn't leak, it is ill-advised. The whole point
of passing an Error to the caller is letting the caller handle the
error. Error handling may report to stderr, to somewhere else, or not
at all. Also reporting in the callee mixes up concerns that should be
kept separate. Since I don't know what reporting to stderr is
supposed to accomplish, I'm not touching it.
Commit 2a1bc8bde7 "migration/rdma: rdma_accept_incoming_migration fix
error handling" plugged the same leak in
rdma_accept_incoming_migration().
Plug the memory leak the same way: keep the report part, delete the
store part.
The report part uses fprintf(). If it's truly an error, it should use
error_report() instead. But I don't know, so I leave it alone, just
like commit 2a1bc8bde7 did.
Fixes: 2da776db48
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-27-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road. At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html
Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).
However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants. By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.
Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).
I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use. As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:
Use of MIN when MIN_CONST is needed:
In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
249 | ({ \
| ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
92 | char array[MIN(1, 2)] = "";
| ^~~
Use of MIN_CONST when MIN is needed:
/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
1225 | i = MIN_CONST(i, n);
| ^
Use of MIN in the preprocessor:
In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
249 | ({ \
| ^
Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros. cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.
It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration:
HMP/migration and test changes from Mao Zhongyi
multifd fix from Laurent Vivier
HMP
qom-set partial reversion/change from David Hildenbrand
now you need -j to pass json format, but it's regained the
old 100M type format.
Memory leak fix from Pan Nengyuan
Virtiofs
fchmod seccomp fix from Max Reitz
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAl7qYlIACgkQBRYzHrxb
/efT/A//eSmxz0m4LB3Vz3pmwKQosVlvLNYgLgfs/dthdM8f3YyhpnY/bCyEmgL2
J/TJevJvzBinVjiGJZkp1nv3wShcf1gpDGKvuhPpStavEajZoxStfGdiGGSvv/sX
XuzQW8efmphoah8qL7J9xE9eC+WOWDATGDlaYIQv4oDG9Ef/OpBOcoYzdwj90ZhR
Gl5AqPf3Bn2Xt2TpWK2aIaBfQtRSTu7xGSB/G8BQNzrJOraoALQmCZKvQYbQtlaq
Guqj7Ad/x7kic5RGG9I5vxy1rQnM0fQvHG57uNvj+Gvi3lLfsCqI77O3gZZmdTmt
mxjHn3OcIiwFmlptM9lNyWaZlrIniB3Di3K7VobHpvnuXbfkXGTElhD2CPNzErNY
QDit9I/ZJxHu9kauyoWBuhKKRfn4S9jpmrEiyIe51v3Gr9r2dkfZlFzYyk1wBJi8
caR7g5QVQFm+3TI5LgnVRisv/FQlLsPXiBaRN2rv6dE+CZIVs/7lbwzwOshpbtxR
NWv0FOvlIyQhdkZrCo+FIVbRK0vRJNZwpHOQ1ZwdlAbIbKBwyfqitMmHHCAJnpI4
CqLg9Bao8VYf/mynaTYt6h+azVnByBgSpj2KJlDUstPxKFhv+0SDgVXdHCnbOEya
6mknqBy4k/9To2g5Y3spJUinf5H4mcIuCWB0jEAioyZ6CjUfifg=
=KYWs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200617a' into staging
Migration (and HMP and virtiofs) pull 2020-06-17
Migration:
HMP/migration and test changes from Mao Zhongyi
multifd fix from Laurent Vivier
HMP
qom-set partial reversion/change from David Hildenbrand
now you need -j to pass json format, but it's regained the
old 100M type format.
Memory leak fix from Pan Nengyuan
Virtiofs
fchmod seccomp fix from Max Reitz
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 17 Jun 2020 19:34:58 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200617a:
migration: fix multifd_send_pages() next channel
docs/xbzrle: update 'cache miss rate' and 'encoding rate' to docs
monitor/hmp-cmds: improvements for the 'info migrate'
monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
monitor/hmp-cmds: add units for migrate_parameters
tests/migration: fix unreachable path in stress test
tests/migration: mem leak fix
hmp: Make json format optional for qom-set
qom-hmp-cmds: fix a memleak in hmp_qom_get
virtiofsd: Whitelist fchmod
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's reported an error of implicit conversion from "unsigned long" to
"double" when compiling with Clang 10. Simply make the encoding rate 0
when the encoded_size is 0.
Fixes: e460a4b1a4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
multifd_send_pages() loops around the available channels,
the next channel to use between two calls to multifd_send_pages() is stored
inside a local static variable, next_channel.
It works well, except if the number of channels decreases between two calls
to multifd_send_pages(). In this case, the loop can try to access the
data of a channel that doesn't exist anymore.
The problem can be triggered if we start a migration with a given number of
channels and then we cancel the migration to restart it with a lower number.
This ends generally with an error like:
qemu-system-ppc64: .../util/qemu-thread-posix.c:77: qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
This patch fixes the error by capping next_channel with the current number
of channels before using it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200617113154.593233-1-lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-31-armbru@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé
David Hildenbrand
Daniel P. Berrangé
Rao, Lei
Peter Xu
Hyman Huang(黄勇)
Dr. David Alan Gilbert
Li Zhijian
Leonardo Bras
Stefano Garzarella
Peter Maydell
Paolo Bonzini
Thomas Huth
Markus Armbruster
Kunkun Jiang
Andrey Gruzdev
Lukas Straub
Jessica Clarke
Vladimir Sementsov-Ogievskiy
Mahmoud Mandour
Hao Wang
Peter Krempa
Stefan Reiter
Wainer dos Santos Moschetta
Jinhao Gao
Eric Blake
Eduardo Habkost
Tuguoyi
Chetan Pant
Longpeng(Mike)
Chuan Zheng
Chen Qun
Kirti Wankhede
Bihong Yu
Marc-André Lureau
Kevin Wolf
Pavel Dovgalyuk
Pavel Dovgalyuk
Laurent Vivier
Dov Murik
Philippe Mathieu-Daudé
Stefan Hajnoczi
zhaolichang
Max Reitz
Zhenyu Ye
Liao Pingfang
Denis V. Lunev
Claudio Fontana
Keqian Zhu
Wei Wang