It's possible to set system time with dates after 2070, however, it's
not possible to set the RTC. It has limitation to up to year
2070 (1970+100). In order to keep both clock in sync and before the
kernel complains on invalid values, bail out early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The current guest-fstrim support only returns an error if some
mountpoint was unable to be trimmed, skipping any possible additional
mountpoints. The result of the TRIM operation itself is also discarded.
This change returns a per mountpoint result of the TRIM operation. If an
error occurs on some mountpoints that error is returned and the
guest-fstrim continue with any additional mountpoints.
The returned values for errors, minimum and trimmed are dependant on the
filesystem, storage stacks and kernel version.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
* s/type/struct/ in schema type definitions
* moved version annotation for new guest-fstrim return field to
the field itself rather than applying to the entire command
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The FITRIM ioctl updates the fstrim_range structure it receives. This
way the caller can determine how many bytes were trimmed. The
guest-fstrim logic reuses the same fstrim_range for each filesystem,
effectively limiting each filesystem to trim at most as much as the
previous was able to trim.
If a previous filesystem would have trimmed 0 bytes, than the next
filesystem would report an error 'Invalid argument' because a FITRIM
request with length 0 is not valid.
This change resets the fstrim_range structure for each filesystem.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
It's detected by coverity. Close the dirfd.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This conveys general information about guest memory blocks. Currently,
just the memory block size.
The size of a memory block is architecture dependent, it represents the logical
unit upon which memory online/offline operations are to be performed.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can change guest's online/offline state of memory blocks, by using
command 'guest-set-memory-blocks'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can get guest's memory block information by using command
"guest-get-memory-blocks", the returned value contains a list of memory block
info, such as phys-index, online state, can-offline info.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*replaced guest-triggerable assertion with an error msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Moved the code that sets non-blocking flag on fd into a separate function.
Signed-off-by: Simon Zolin <szolin@parallels.com>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If readdir_r fails, error_setg_errno will reference the freed
pointer *dirpath*.
Moreover, readdir_r may cause a buffer overflow, using readdir instead.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. ga_get_fd_handle() and
guest_file_handle_add() don't return a useful value when they fail,
but that's just stupid. Fix that, and check them instead. As far
as I can tell, errp can't be null there, but this is more robust and
more obviously correct.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We mixed the use of "guest time", "system time", "hardware time",
"RTC" in documentation, it's unclear.
This patch just added two remarks of RTC and replace two "guest time"
by "guest's system time".
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC qga/commands.o
qga/commands.c: In function ‘slog’:
qga/commands.c:28:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap);
^
gcc 4.8.2 reports this warning when slog is declared with the
gnu_printf format attribute:
qga/commands-posix.c: In function ‘qmp_guest_file_open’:
qga/commands-posix.c:404:5: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=]
slog("guest-file-open, handle: %d", handle);
^
On 32 bit hosts there are three more warnings which are also fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.
Following patch changes the command so it works with systemd, upstart and SysV
With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
shutdown -P +0 "..."
shutdown -H +0 "..."
shutdown -r +0 "..."
SysV equivalents for these are:
shutdown -h -P +0 "..."
shutdown -h -H +0 "..."
shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.
According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
shutdown -p +0 "..."
shutdown -h +0 "..."
shutdown -r +0 "..."
shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, fsfreeze-freeze may cause deadlock if a guest has loopback mounts
of image files in its disk; e.g.:
# mount | grep ^/
/dev/vda1 / type ext4 (rw,noatime,seclabel,data=ordered)
/tmp/disk.img on /mnt type ext4 (rw,relatime,seclabel)
To avoid the deadlock, this freezes filesystems in reverse order of mounts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In Windows guests this may make a difference.
Since the original patch (commit c689b4f1) sought to be pedantic and to
consider theoretical corner cases of portability, we should fix it up
where it failed to come through in that pursuit.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The qemu guest agent creates a bunch of files with insecure permissions
when started in daemon mode. For example:
-rw-rw-rw- 1 root root /var/log/qemu-ga.log
-rw-rw-rw- 1 root root /var/run/qga.state
-rw-rw-rw- 1 root root /var/log/qga-fsfreeze-hook.log
In addition, at least all files created with the "guest-file-open" QMP
command, and all files created with shell output redirection (or
otherwise) by utilities invoked by the fsfreeze hook script are affected.
For now mask all file mode bits for "group" and "others" in
become_daemon().
Temporarily, for compatibility reasons, stick with the 0666 file-mode in
case of files newly created by the "guest-file-open" QMP call. Do so
without changing the umask temporarily.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hosts hold on to handles provided by guest-file-open for periods that can
span beyond the life of the qemu-ga process that issued them. Since these
are issued starting from 0 on every restart, we run the risk of issuing
duplicate handles after restarts/reboots.
As a result, users with a stale copy of these handles may end up
reading/writing corrupted data due to their existing handles effectively
being re-assigned to an unexpected file or offset.
We unfortunately do not issue handles as strings, but as integers, so a
solution such as using UUIDs can't be implemented without introducing a
new interface.
As a workaround, we fix this by implementing a persistent key-value store
that will be used to track the value of the last handle that was issued
across restarts/reboots to avoid issuing duplicates.
The store is automatically written to the same directory we currently
set via --statedir to track fsfreeze state, and so should be applicable
for stable releases where this flag is supported.
A follow-up can use this same store for handling fsfreeze state, but
that change is cosmetic and left out for now.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
* fixed guest_file_handle_add() return value from uint64_t to int64_t
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Neglects to free errors allocated by qmp_guest_fsfreeze_thaw().
Spotted by Coverity.
While there, drop the test whether return value is negative (it's
never true), and improve logging.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
To use the online disk snapshot for online-backup, application-level
consistency of the snapshot image is required. However, currently the
guest agent can provide only filesystem-level consistency, and the
snapshot may contain dirty data, for example, incomplete transactions.
This patch provides the opportunity to quiesce applications before
snapshot is taken.
If --fsfreeze-hook option is specified, the hook is executed with
"freeze" argument before the filesystem is frozen by fsfreeze-freeze
command. As for fsfreeze-thaw command, the hook is executed with "thaw"
argument after the filesystem is thawed.
This patch depends on patchset to improve error reporting by Luiz Capitulino:
http://lists.gnu.org/archive/html/qemu-devel/2012-11/msg03016.html
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
*clarified usage in help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR today.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR today.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR. Also, adds ga_wait_child() as
a future commit will use it too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use error_setg_errno() when possible with an improved error description.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
