Commit Graph

366 Commits

Author SHA1 Message Date
Libo Zhou d1cc153350 target/mips: gdbstub: Revert commit 8e0b373
Multiple reports from users were received regarding failures of
packet 'g' communication with gdb for some MIPS configurations.
It was found out (by bisecting) that the problematic commit is
8e0b373. Revert that commit until a better solution is developed.

Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Libo Zhou <zhlb29@foxmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1568207966-25202-1-git-send-email-aleksandar.markovic@rt-rk.com>
2019-09-12 18:25:34 +02:00
Peter Maydell 4f02a06d50 target/mips: Switch to do_transaction_failed() hook
Switch the MIPS target from the old unassigned_access hook to the new
do_transaction_failed hook.

Unlike the old hook, do_transaction_failed is only ever called from
the TCG memory access paths, so there is no need for the "ignore this
if we're using KVM" hack that we were previously using to work around
the way unassigned_access was called for all kinds of memory accesses
to unassigned physical addresses.

The MIPS target does not ever do direct memory reads by physical
address (via either ldl_phys etc or address_space_ldl etc), so the
only memory accesses this affects are the 'normal' guest loads and
stores, which will be handled by the new hook; their behaviour is
unchanged.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20190802160458.25681-3-peter.maydell@linaro.org>
2019-09-12 18:25:34 +02:00
Peter Maydell 9de65783e1 Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
 Return host address from probe_write / probe_access.
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
 gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
 CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
 foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
 VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
 RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
 xM2HEw==
 =bLLU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging

Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.

# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190903: (36 commits)
  tcg: Factor out probe_write() logic into probe_access()
  tcg: Make probe_write() return a pointer to the host page
  s390x/tcg: Pass a size to probe_write() in do_csst()
  hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
  mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
  tcg: Enforce single page access in probe_write()
  tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
  s390x/tcg: Fix length calculation in probe_write_access()
  s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
  tcg: Check for watchpoints in probe_write()
  cputlb: Handle watchpoints via TLB_WATCHPOINT
  cputlb: Remove double-alignment in store_helper
  cputlb: Fix size operand for tlb_fill on unaligned store
  exec: Factor out cpu_watchpoint_address_matches
  cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
  exec: Factor out core logic of check_watchpoint()
  exec: Move user-only watchpoint stubs inline
  target/sparc: sun4u Invert Endian TTE bit
  target/sparc: Add TLB entry with attributes
  cputlb: Byte swap memory transaction attribute
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04 16:29:18 +01:00
David Hildenbrand 3a9576ec98 mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
Let's call it also for CONFIG_USER_ONLY. While at it, add a FIXME and get
rid of one local variable.

MIPS code probably needs a bigger refactoring in regards of
ensure_writable_pages(), similar to s390x, so for example, watchpoints
can be handled reliably later. The actually accessed addresses should
be probed only, not full pages.

Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190826075112.25637-6-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:34:18 -07:00
Tony Nguyen 4574664677 target/mips: Hard code size with MO_{8|16|32|64}
Temporarily no-op size_memop was introduced to aid the conversion of
memory_region_dispatch_{read|write} operand "unsigned size" into
"MemOp op".

Now size_memop is implemented, again hard coded size but with
MO_{8|16|32|64}. This is more expressive and avoids size_memop calls.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <99c4459d5c1dc9013820be3dbda9798165c15b99.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:39 -07:00
Tony Nguyen e501824b3f target/mips: Access MemoryRegion with MemOp
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".

Convert interfaces by using no-op size_memop.

After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".

As size_memop is a no-op, this patch does not change any behaviour.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <af407f0a34dc95ef5aaf2c00dffda7c65df23c3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:38 -07:00
Tony Nguyen 14776ab5a1 tcg: TCGMemOp is now accelerator independent MemOp
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.

Target dependant attributes are conditionalized upon NEED_CPU_H.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:38 -07:00
Aleksandar Markovic abd4393d76 target/mips: Fix emulation of ST.W in system mode
Order of arguments in helper_ret_stl_mmu() invocations was wrong,
apparently caused by a misplaced multiline copy-and-paste.

Fixes: 6decc57 ("target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host")

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1567009239-11273-1-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:11:14 +02:00
Aleksandar Markovic 14d92efd72 target/mips: Clean up handling of CP0 register 31
Clean up handling of CP0 register 31.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-31-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:08:49 +02:00
Aleksandar Markovic 4bcf121ebb target/mips: Clean up handling of CP0 register 30
Clean up handling of CP0 register 30.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-30-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:08:25 +02:00
Aleksandar Markovic af4bb6da80 target/mips: Clean up handling of CP0 register 29
Clean up handling of CP0 register 29.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-29-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:08:10 +02:00
Aleksandar Markovic a30e2f2180 target/mips: Clean up handling of CP0 register 28
Clean up handling of CP0 register 28.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-28-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:07:56 +02:00
Aleksandar Markovic 5a10873d7d target/mips: Clean up handling of CP0 register 27
Clean up handling of CP0 register 27.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-27-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:07:38 +02:00
Aleksandar Markovic dbbf08b289 target/mips: Clean up handling of CP0 register 26
Clean up handling of CP0 register 26.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-26-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:07:26 +02:00
Aleksandar Markovic 1176b328c3 target/mips: Clean up handling of CP0 register 25
Clean up handling of CP0 register 25.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-25-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:07:11 +02:00
Aleksandar Markovic 8d7b4b6efb target/mips: Clean up handling of CP0 register 24
Clean up handling of CP0 register 24.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-24-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:06:29 +02:00
Aleksandar Markovic 4cbf4b6d00 target/mips: Clean up handling of CP0 register 23
Clean up handling of CP0 register 23.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-23-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:06:07 +02:00
Aleksandar Markovic 14f92b0b9c target/mips: Clean up handling of CP0 register 20
Clean up handling of CP0 register 20.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-22-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:05:51 +02:00
Aleksandar Markovic be274dc18e target/mips: Clean up handling of CP0 register 19
Clean up handling of CP0 register 19.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-21-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 12:04:01 +02:00
Aleksandar Markovic e8dcfe825a target/mips: Clean up handling of CP0 register 18
Clean up handling of CP0 register 18.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-20-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:56:05 +02:00
Aleksandar Markovic 706ce14205 target/mips: Clean up handling of CP0 register 17
Clean up handling of CP0 register 17.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-19-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:55:49 +02:00
Aleksandar Markovic 433efb4cca target/mips: Clean up handling of CP0 register 16
Clean up handling of CP0 register 16.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-18-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:55:33 +02:00
Aleksandar Markovic 4466cd49e5 target/mips: Clean up handling of CP0 register 15
Clean up handling of CP0 register 15.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-17-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:55:18 +02:00
Aleksandar Markovic 35e4b54d90 target/mips: Clean up handling of CP0 register 14
Clean up handling of CP0 register 14.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-16-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:55:01 +02:00
Aleksandar Markovic e3c7559d89 target/mips: Clean up handling of CP0 register 13
Clean up handling of CP0 register 13.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-15-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:54:40 +02:00
Aleksandar Markovic 2b0848674b target/mips: Clean up handling of CP0 register 12
Clean up handling of CP0 register 12.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-14-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:54:22 +02:00
Aleksandar Markovic f5f3834ff0 target/mips: Clean up handling of CP0 register 11
Clean up handling of CP0 register 11.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-13-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:54:07 +02:00
Aleksandar Markovic 860ffef047 target/mips: Clean up handling of CP0 register 10
Clean up handling of CP0 register 10.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-12-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:53:52 +02:00
Aleksandar Markovic e5a98a7232 target/mips: Clean up handling of CP0 register 9
Clean up handling of CP0 register 9.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-11-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:53:23 +02:00
Aleksandar Markovic 67d167d2d8 target/mips: Clean up handling of CP0 register 8
Clean up handling of CP0 register 8.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-10-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:53:07 +02:00
Aleksandar Markovic 143a9875e5 target/mips: Clean up handling of CP0 register 7
Clean up handling of CP0 register 7.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-9-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:52:51 +02:00
Aleksandar Markovic 9023594b40 target/mips: Clean up handling of CP0 register 6
Clean up handling of CP0 register 6.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:52:31 +02:00
Aleksandar Markovic a1e76353e3 target/mips: Clean up handling of CP0 register 5
Clean up handling of CP0 register 5.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:52:11 +02:00
Aleksandar Markovic 020fe37909 target/mips: Clean up handling of CP0 register 4
Clean up handling of CP0 register 4.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:51:09 +02:00
Aleksandar Markovic acd3731632 target/mips: Clean up handling of CP0 register 3
Clean up handling of CP0 register 3.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:50:58 +02:00
Aleksandar Markovic 6d27d5bd73 target/mips: Clean up handling of CP0 register 2
Clean up handling of CP0 register 2.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:50:47 +02:00
Aleksandar Markovic 30deb4605b target/mips: Clean up handling of CP0 register 1
Clean up handling of CP0 register 1.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:50:35 +02:00
Aleksandar Markovic 1b142da5f8 target/mips: Clean up handling of CP0 register 0
Clean up handling of CP0 register 0.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29 11:50:18 +02:00
Peter Maydell f3b8f18ebf Monitor patches for 2019-08-21
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl1dZKsSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTJ4QP/10izA+dSofQ9404GRq3TNzwRCKugU44
 nES9CqDh6x5emx+ADQWYkugblgfH9GOvUaAUNtY+uFaEr55yC/F+VWeVXvyjt5U6
 ZpPZqIRDOHo2+PZrddr/KcKmiomS6plz03m9bzb3pYN1yIl2ZzgClAhAqWQLk0WB
 wwiY+YsJ83YR4sdiRMZkuF+UL7N8fSqYvIIj0yzM8+8ONDor9n16PoPeFg3JSsyG
 aMxXIUnSBZAVtClaNkUPtS0Wf9XEuqoG1rvMRV4Vv+eeb7fwA414DqanRJdLlGMA
 yNRtFcVyztCfjgVEXnY9JJlFe6pDkoe8ycoimQ4YA60C9c1DIMHqyjFWXRHfDwk8
 bYMSX6CTpfoEvbTfmwqYR6KSkb/KuXiFDmcYlTYFvIt3grhhdHQbru9vy+E5sm/b
 j3CPV2DTCkeGY+oZFfKIaQT9yoWZOhmMY5doMTYyinXygPTGQROUrHtzUeRXKmJZ
 arqDRmh+mlEiGETNeYQCI45eYCSDYxO+UNrhszxhmv6B1+ixhIrV2oXhi61vVBeY
 yngY4EILbuA2Z/E4BevJk91ESWJTr3UP13c6p7yf21iN4BD1KkHy5HoXCgYfQDeV
 4kar49g6WQ/VQEiwhi65Xd0OwstynkcV69F+kMagVMgaLeRsdU5ikGJQzxTeWJRl
 SPpc7oDwuAS+
 =2F3E
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-08-21' into staging

Monitor patches for 2019-08-21

# gpg: Signature made Wed 21 Aug 2019 16:35:07 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-08-21:
  monitor/qmp: Update comment for commit 4eaca8de26
  qdev: Collect HMP handlers command handlers in qdev-monitor.c
  qapi: Move query-target from misc.json to machine.json
  hw/core: Move cpu.c, cpu.h from qom/ to hw/core/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 10:31:21 +01:00
Markus Armbruster 2e5b09fd0e hw/core: Move cpu.c, cpu.h from qom/ to hw/core/
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
2019-08-21 13:24:01 +02:00
Pavel Dovgalyuk 9e9b10c649 icount: remove unnecessary gen_io_end calls
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
2019-08-20 17:26:22 +02:00
tony.nguyen@bt.com 52bf9771fd configure: Define target access alignment in configure
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.

Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-20 17:26:19 +02:00
Aleksandar Markovic 71375b5924 target/mips: Style improvements in translate.c
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-12-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Aleksandar Markovic eca3cbb847 target/mips: Style improvements in machine.c
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-10-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Aleksandar Markovic cf02a11648 target/mips: Style improvements in cpu.c
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Aleksandar Markovic 2f0d019672 target/mips: Style improvements in cp0_timer.c
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Alex Bennée 502700d067 target/mips: rationalise softfloat includes
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-08-19 12:07:13 +01:00
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00