Commit Graph

223 Commits

Author SHA1 Message Date
Richard Henderson ce8d408205 fpu: Bound increment for scalbn
Without bounding the increment, we can overflow exp either here
in scalbn_decomposed or when adding the bias in round_canonical.
This can result in e.g. underflowing to 0 instead of overflowing
to infinity.

The old softfloat code did bound the increment.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-17 14:52:38 +01:00
Alex Bennée 9cb4e398c2 fpu/softfloat: check for Inf / x or 0 / x before /0
The re-factoring of div_floats changed the order of checking meaning
an operation like -inf/0 erroneously raises the divbyzero flag.
IEEE-754 (2008) specifies this should only occur for operations on
finite operands.

We fix this by moving the check on the dividend being Inf/0 to before
the divisor is zero check.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180416135442.30606-1-alex.bennee@linaro.org
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-16 18:40:48 +01:00
Alex Bennée 801bc56336 fpu/softfloat: raise float_invalid for NaN/Inf in round_to_int_and_pack
The re-factor broke the raising of INVALID when NaN/Inf is passed to
the float_to_int conversion functions. round_to_uint_and_pack got this
right for NaN but also missed out the Inf handling.

Fixes https://bugs.launchpad.net/qemu/+bug/1759264

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180413140334.26622-3-alex.bennee@linaro.org
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-16 10:10:31 +01:00
Emilio G. Cota 6245327a36 softfloat: fix {min, max}nummag for same-abs-value inputs
Before 8936006 ("fpu/softfloat: re-factor minmax", 2018-02-21),
we used to return +Zero for maxnummag(-Zero,+Zero); after that
commit, we return -Zero.

Fix it by making {min,max}nummag consistent with {min,max}num,
deferring to the latter when the absolute value of the operands
is the same.

With this fix we now pass fp-test.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180413140334.26622-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-13 15:47:53 +01:00
Richard Henderson bd49e6027c fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
We incorrectly passed in the current rounding mode
instead of float_round_to_zero.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180410055912.934-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-10 13:02:26 +01:00
Stef O'Rear cffad426f5 softfloat: fix crash on int conversion of SNaN
Signed-off-by: Stef O'Rear <sorear2@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 14:30:12 +00:00
Michael Clark f798f1e29b
RISC-V FPU Support
Helper routines for FPU instructions and NaN definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07 08:30:28 +13:00
Laurent Vivier 0f605c889c softfloat: use floatx80_infinity in softfloat
Since f3218a8 ("softfloat: add floatx80 constants")
floatx80_infinity is defined but never used.

This patch updates floatx80 functions to use
this definition.

This allows to define a different default Infinity
value on m68k: the m68k FPU defines infinity with
all bits set to zero in the mantissa.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-4-laurent@vivier.eu>
2018-03-04 17:27:35 +01:00
Laurent Vivier 88857aca93 softfloat: export some functions
Move fpu/softfloat-macros.h to include/fpu/

Export floatx80 functions to be used by target floatx80
specific implementations.

Exports:
  propagateFloatx80NaN(), extractFloatx80Frac(),
  extractFloatx80Exp(), extractFloatx80Sign(),
  normalizeFloatx80Subnormal(), packFloatx80(),
  roundAndPackFloatx80(), normalizeRoundAndPackFloatx80()

Also exports packFloat32() that will be used to implement
m68k fsinh, fcos, fsin, ftan operations.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-2-laurent@vivier.eu>
2018-03-04 17:22:55 +01:00
Alex Bennée c13bb2da9e fpu/softfloat: re-factor sqrt
This is a little bit of a departure from softfloat's original approach
as we skip the estimate step in favour of a straight iteration. There
is a minor optimisation to avoid calculating more bits of precision
than we need however this still brings a performance drop, especially
for float64 operations.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:54 +00:00
Alex Bennée 0c4c909291 fpu/softfloat: re-factor compare
The compare function was already expanded from a macro. I keep the
macro expansion but move most of the logic into a compare_decomposed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:47 +00:00
Alex Bennée 8936006707 fpu/softfloat: re-factor minmax
Let's do the same re-factor treatment for minmax functions. I still
use the MACRO trick to expand but now all the checking code is common.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:41 +00:00
Alex Bennée 0bfc9f1952 fpu/softfloat: re-factor scalbn
This is one of the simpler manipulations you could make to a floating
point number.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:34 +00:00
Alex Bennée c02e1fb80b fpu/softfloat: re-factor int/uint to float
These are considerably simpler as the lower order integers can just
use the higher order conversion function. As the decomposed fractional
part is a full 64 bit rounding and inexact handling comes from the
pack functions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:29 +00:00
Alex Bennée ab52f973a5 fpu/softfloat: re-factor float to int/uint
We share the common int64/uint64_pack_decomposed function across all
the helpers and simply limit the final result depending on the final
size.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:21:22 +00:00
Alex Bennée dbe4d53a59 fpu/softfloat: re-factor round_to_int
We can now add float16_round_to_int and use the common round_decomposed and
canonicalize functions to have a single implementation for
float16/32/64 round_to_int functions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:21:16 +00:00
Alex Bennée d446830a3a fpu/softfloat: re-factor muladd
We can now add float16_muladd and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 muladd functions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:21:11 +00:00
Alex Bennée cf07323d49 fpu/softfloat: re-factor div
We can now add float16_div and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 versions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:21:06 +00:00
Alex Bennée 74d707e2cc fpu/softfloat: re-factor mul
We can now add float16_mul and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 versions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:20:59 +00:00
Alex Bennée 6fff216769 fpu/softfloat: re-factor add/sub
We can now add float16_add/sub and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 add and sub functions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-02-21 10:20:53 +00:00
Alex Bennée a90119b5a2 fpu/softfloat: define decompose structures
These structures pave the way for generic softfloat helper routines
that will operate on fully decomposed numbers.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-02-21 10:20:45 +00:00
Alex Bennée d97544c94a fpu/softfloat: move the extract functions to the top of the file
This is pure code-motion during re-factoring as the helpers will be
needed earlier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:20:39 +00:00
Alex Bennée 13894527f5 fpu/softfloat: improve comments on ARM NaN propagation
Mention the pseudo-code fragment from which this is based.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:20:37 +00:00
Alex Bennée 210cbd4910 fpu/softfloat: implement float16_squash_input_denormal
This will be required when expanding the MINMAX() macro for 16
bit/half-precision operations.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:20:14 +00:00
Laurent Vivier 0f72129281 softfloat: define floatx80_round()
Add a function to round a floatx80 to the defined precision
(floatx80_rounding_precision)

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170628204241.32106-5-laurent@vivier.eu>
2017-06-29 20:27:39 +02:00
Laurent Vivier e5b0cbe8e8 softfloat: define 680x0 specific values
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170611231633.32582-2-laurent@vivier.eu>
2017-06-15 09:15:38 +02:00
Peter Maydell d000b477f2 softfloat: Use correct type in float64_to_uint64_round_to_zero()
In float64_to_uint64_round_to_zero() a typo meant that we were
taking the uint64_t return value from float64_to_uint64() and
putting it into an int64_t variable before returning it as
uint64_t again. Use uint64_t instead of pointlessly casting it
back and forth to int64_t.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-28 09:03:38 +03:00
Bharata B Rao fd425037d2 softfloat: Add float128_to_uint32_round_to_zero()
float128_to_uint32_round_to_zero() is needed by xscvqpuwz instruction
of PowerPC ISA 3.0.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Bharata B Rao 2e6d856835 softfloat: Add float128_to_uint64_round_to_zero()
Implement float128_to_uint64() and use that to implement
float128_to_uint64_round_to_zero()

This is required by xscvqpudz instruction of PowerPC ISA 3.0.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Bharata B Rao 9ee6f678f4 softfloat: Add round-to-odd rounding mode
Power ISA 3.0 introduces a few quadruple precision floating point
instructions that support round-to-odd rounding mode. The
round-to-odd mode is explained as under:

Let Z be the intermediate arithmetic result or the operand of a convert
operation. If Z can be represented exactly in the target format, the
result is Z. Otherwise the result is either Z1 or Z2 whichever is odd.
Here Z1 and Z2 are the next larger and smaller numbers representable
in the target format respectively.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Bharata B Rao 5d51eaea84 softfloat: Fix the default qNAN for target-ppc
Currently float128_default_nan() returns 0xFFFF800000000000 in the
higher double word, but it should return 0x7FFF800000000000 which
is the correct higher double word for default qNAN on PowerPC.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:14 +11:00
Richard Henderson 005fa38d86 target-hppa: Add softfloat specializations
Like the original MIPS, HPPA has the MSB of an SNaN set.
However, it has different rules for silencing an SNaN:
(1) msb is cleared and (2) msb-1 must be set if the fraction
is now zero, and (implementation defined) may be set always.
I haven't checked real hardware but chose the set always
alternative because it's easy and within spec.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Andrew Dutcher d1eb8f2acb fpu: add mechanism to check for invalid long double formats
All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).

For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.

Signed-off-by: Andrew Dutcher <andrew@andrewdutcher.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1471392895-17324-1-git-send-email-andrew@andrewdutcher.com
[PMM: changed "1 << 63" to "1ULL << 63" to fix compile errors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-15 12:43:18 +01:00
Pranith Kumar dfd6076710 softfloat: Fix warn about implicit conversion from int to int8_t
Change the flag type to 'uint8_t' to fix the implicit conversion error.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 20160810185502.32015-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-15 16:15:38 +01:00
Aleksandar Markovic c27644f0e9 softfloat: Handle snan_bit_is_one == 0 in MIPS pickNaNMulAdd()
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct the order of argument comparisons in pickNaNMulAdd().

For more info, see [1], page 53, section "3.5.3 NaN Propagation".

[1] "MIPS Architecture for Programmers Volume IV-j:
    The MIPS32 SIMD Architecture Module",
    Imagination Technologies LTD, Revision 1.12, February 3, 2016

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
 * reworded the subject of the patch
 * swapped if/else code blocks to match the commit description]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:32 +01:00
Aleksandar Markovic a7c04d545a softfloat: For Mips only, correct default NaN values
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct default NaN values (in their 16-, 32-, and 64-bit flavors).

For more info, see [1], page 84, Table 6.3 "Value Supplied When a New
Quiet NaN Is Created", and [2], page 52, Table 3.7 "Default NaN
Encodings".

[1] "MIPS Architecture For Programmers Volume II-A:
    The MIPS64 Instruction Set Reference Manual",
    Imagination Technologies LTD, Revision 6.04, November 13, 2015

[2] "MIPS Architecture for Programmers Volume IV-j:
    The MIPS32 SIMD Architecture Module",
    Imagination Technologies LTD, Revision 1.12, February 3, 2016

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:31 +01:00
Aleksandar Markovic a59eaea646 softfloat: Clean code format in fpu/softfloat-specialize.h
fpu/softfloat-specialize.h is the most critical file in SoftFloat
library, since it handles numerous differences between platforms in
relation to floating point arithmetics. This patch makes the code
in this file more consistent format-wise, and hopefully easier to
debug and maintain.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:30 +01:00
Aleksandar Markovic af39bc8c49 softfloat: Implement run-time-configurable meaning of signaling NaN bit
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.

Background:

In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).

Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.

Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.

QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.

On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.

The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.

IMPORTANT:

This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.

Further break down of changes:

  1) Added field snan_bit_is_one to the structure float_status, and
     correspondent setter function set_snan_bit_is_one().

  2) Constants <float16|float32|float64|floatx80|float128>_default_nan
     (used both internally and externally) converted to functions
     <float16|float32|float64|floatx80|float128>_default_nan(float_status*).
     This is necessary since they are dependent on signaling bit meaning.
     At the same time, for the sake of code cleanup and simplicity, constants
     <floatx80|float128>_default_nan_<low|high> (used only internally within
     SoftFloat library) are removed, as not needed.

  3) Added a float_status* argument to SoftFloat library functions
     XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
     XXX_maybe_silence_nan(XXX a_). This argument must be present in
     order to enable correct invocation of new version of functions
     XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
     here)

  4) Updated code for all platforms to reflect changes in SoftFloat library.
     This change is twofolds: it includes modifications of SoftFloat library
     functions invocations, and an addition of invocation of function
     set_snan_bit_is_one() during CPU initialization, with arguments that
     are appropriate for each particular platform. It was established that
     all platforms zero their main CPU data structures, so snan_bit_is_one(0)
     in appropriate places is not added, as it is not needed.

[1] "IEEE Standard for Floating-Point Arithmetic",
    IEEE Computer Society, August 29, 2008.

Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
 * cherry-picked 2 chunks from patch #2 to fix compilation warnings]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:40:37 +01:00
Bastian Koppelmann 996a729f9b target-tricore: Add FPU infrastructure
This patch adds a file for all the FPU related helpers with all the includes,
useful defines, and a function to update the status bits. Additionally it adds
a mask for the rounding mode bits of PSW as well as all the opcodes for the
FPU instructions.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <1457708597-3025-2-git-send-email-kbastian@mail.uni-paderborn.de>
2016-03-23 09:22:48 +01:00
Peter Maydell 0c48262d47 fpu: Use plain 'int' rather than 'int_fast16_t' for exponents
Use the plain 'int' type rather than 'int_fast16_t' for handling
exponents. Exponents don't need to be exactly 16 bits, so using int16_t
for them would confuse more than it clarified.

This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-4-git-send-email-peter.maydell@linaro.org
2016-02-19 16:27:22 +00:00
Peter Maydell 07d792d2b0 fpu: Use plain 'int' rather than 'int_fast16_t' for shift counts
Use the plain 'int' type rather than 'int_fast16_t' for shift counts
in the various shift related functions, since we don't actually care
about the size of the integer at all here, and using int16_t would
be confusing.

This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-3-git-send-email-peter.maydell@linaro.org
2016-02-19 16:27:22 +00:00
Peter Maydell 0bb721d721 fpu: Remove use of int_fast16_t in conversions to int16
Make the functions which convert floating point to 16 bit integer
return int16_t rather than int_fast16_t, and correspondingly use
int_fast16_t in their internal implementations where appropriate.

(These functions are used only by the ARM target.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-2-git-send-email-peter.maydell@linaro.org
2016-02-19 16:27:21 +00:00
Peter Maydell d38ea87ac5 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Aurelien Jarno 7ceac86f49 softfloat: fix return type of roundAndPackFloat16
The roundAndPackFloat16 function should return a float16 value, not a
float32 one. Fix that.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452700993-6570-1-git-send-email-aurelien@aurel32.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-22 15:09:21 +00:00
Peter Maydell 8f506c709a fpu: Replace int8 typedef with int8_t
Replace the int8 softfloat-specific typedef with int8_t.
This change was made with

find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint8\b/int8_t/g'

together with manual removal of the typedef definition, and
manual undoing of various mis-hits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-6-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:21 +00:00
Peter Maydell 3a87d00910 fpu: Replace uint32 typedef with uint32_t
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with

find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'

together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.

All the uses in hw/ were using the wrong type by mistake.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:21 +00:00
Peter Maydell f4014512cd fpu: Replace int32 typedef with int32_t
Replace the int32 softfloat-specific typedef with int32_t.
This change was made with

find hw include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint32\b/int32_t/g'

together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.

The uses in hw/ipmi/ should not have been using this type at all.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-4-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:21 +00:00
Peter Maydell 182f42fdc2 fpu: Replace uint64 typedef with uint64_t
Replace the uint64 softfloat-specific typedef with uint64_t.
This change was made with

find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint64\b/uint64_t/g'

together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.

Note that the target-mips/kvm.c and target-s390x/kvm.c changes are fixing
code that should not have been using the uint64 type in the first place.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-3-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:20 +00:00
Peter Maydell f42c222482 fpu: Replace int64 typedef with int64_t
Replace the int64 softfloat-specific typedef with int64_t.
This change was made with

find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint64\b/int64_t/g'

together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1452603315-27030-2-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:20 +00:00
Aurelien Jarno 2daea9c16f target-s390x: define default NaN values
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00