Implement the following PowerISA v3.1 instructions:
vdivesw: Vector Divide Extended Signed Word
vdiveuw: Vector Divide Extended Unsigned Word
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
vdivsw: Vector Divide Signed Word
vdivuw: Vector Divide Unsigned Word
vdivsd: Vector Divide Signed Doubleword
vdivud: Vector Divide Unsigned Doubleword
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the next round of system calls. These are open, openat, close,
fdatasync, fsync, close_from, revoke, access, eacccess, facccessat, chdir,
fchdir, rename, renameat, mkdir, mkdirat, rmdir, _getcwd, dup, dup2, truncate,
ftruncate, acct and sync. In addition, the helper functions needed for these to
work are included. With the helper functions, all of these system calls are the
'obvious' wrapper...
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=JmJY
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-syscall-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user into staging
bsd-user: Next round of syscalls
Implement the next round of system calls. These are open, openat, close,
fdatasync, fsync, close_from, revoke, access, eacccess, facccessat, chdir,
fchdir, rename, renameat, mkdir, mkdirat, rmdir, _getcwd, dup, dup2, truncate,
ftruncate, acct and sync. In addition, the helper functions needed for these to
work are included. With the helper functions, all of these system calls are the
'obvious' wrapper...
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmKvZSwACgkQbBzRKH2w
# EQCrdxAA0UeXmh/l1znPSrX4lif7Vhe4H5TdmHavGQX0p7B+dMd160SMLfKFJt7J
# HHXuQZbPFNuwqE5qiFPTcXIFjT5tq2WSjd9ZC/ZexfzBJIICwcUWuWvG2WfCA3fD
# hth/Ru2fX0vUwoUwvYw7lTPnhb9o52Z1rf5AEFu85E3UjKWEcARHCakm7n8a+Cg+
# PkF1qZ/qFic+bkBZkZLWyHB5qR2p2sIp+VHwlG1ew39Xim457kynQOoF8etIXc1Y
# g5PrjePUsVhPR7qm4CFplM4UOyGOOqIykHERppaXKtk2+kP8dp9HWog9Z/IFVOKc
# z3huDtf03UtmohjdJBYkpCcCzmd2EETRPgkFaVT5ciVGMb3Nom1b2/DOnndpS9qb
# TdE7J6Ek1vp4Mr386QHzm6AfdoHGZc4tH+SpDQZrsWbnugklYnQd3++GCqj8D2rA
# LJ8oWInviZP8xWDn5q1sXCNw/lgVup9ZNrMl7TcXmQDZXHSW1tElIAT2PZCebman
# rSwg/umr7fPOXdIAkLhF77bAt3J3kAzxhuYwHEstB3kRXEJ2VinLMf3BJBrGLnuK
# kr6kJy6hw7luIT5nUNLrrNtwsAAwEu6S7OSGhEiGaUSIhiER96k/tX2u/KOBtwGC
# VzIP7vK5V2xYPepyj4tXkVRHkjxxw3s8fYRXf73IsaZ6Avot8pg=
# =JmJY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 19 Jun 2022 11:04:28 AM PDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-syscall-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user:
bsd-user: Implement acct and sync
bsd-user: Implement trunctate and ftruncate
bsd-user: Implement dup and dup2
bsd-user: Implement rmdir and undocumented __getcwd
bsd-user: Implement mkdir and mkdirat
bsd-user: Implement link, linkat, unlink and unlinkat
bsd-user: Implement rename and renameat
bsd-user: Implement chdir and fchdir
bsd-user: Implement revoke, access, eaccess and faccessat
bsd-user: Implement fdatasync, fsync and close_from
bsd-user: Implement open, openat and close
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
more CXL patches
RSA support for crypto
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKrYLMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpwpwH/2IS+V7wS3q/XXPz1HndJLpUP/z+mkeu9W6+
X1U9CJ+66Ag4eD5T/jzoN0JEjiTeET/3xM+PY5NYZCh6QTAmA7EfFZv99oNWpGd1
+nyxOdaMDPSscOKjLfDziVTi/QYIZBtU6TeixL9whkipYCqmgbs5gXV8ynltmKyF
bIJVeaXm5yQLcCTGzKzdXf+HmTErpEGDCDHFjzrLVjICRDdekElGVwYTn+ycl7p7
oLsWWVDgqo0p86BITlrHUXUrxTXF3wyg2B59cT7Ilbb3o+Fa2GsP+o9IXMuVoNNp
A+zrq1QZ49UO3XwkS03xDDioUQ1T/V0L4w9dEfaGvpY4Horv0HI=
=PvmT
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
RSA support for crypto
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKrYLMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpwpwH/2IS+V7wS3q/XXPz1HndJLpUP/z+mkeu9W6+
# X1U9CJ+66Ag4eD5T/jzoN0JEjiTeET/3xM+PY5NYZCh6QTAmA7EfFZv99oNWpGd1
# +nyxOdaMDPSscOKjLfDziVTi/QYIZBtU6TeixL9whkipYCqmgbs5gXV8ynltmKyF
# bIJVeaXm5yQLcCTGzKzdXf+HmTErpEGDCDHFjzrLVjICRDdekElGVwYTn+ycl7p7
# oLsWWVDgqo0p86BITlrHUXUrxTXF3wyg2B59cT7Ilbb3o+Fa2GsP+o9IXMuVoNNp
# A+zrq1QZ49UO3XwkS03xDDioUQ1T/V0L4w9dEfaGvpY4Horv0HI=
# =PvmT
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 09:56:19 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
acpi/erst: fix fallthrough code upon validation failure
vhost: also check queue state in the vhost_dev_set_log error routine
crypto: Introduce RSA algorithm
virtio-iommu: Add an assert check in translate routine
virtio-iommu: Use recursive lock to avoid deadlock
virtio-iommu: Add bypass mode support to assigned device
virtio/vhost-user: Fix wrong vhost notifier GPtrArray size
docs/cxl: Add switch documentation
pci-bridge/cxl_downstream: Add a CXL switch downstream port
pci-bridge/cxl_upstream: Add a CXL switch upstream port
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At any step when any validation fail in check_erst_backend_storage(), there is
no need to continue further through other validation checks. Further, by
continuing even when record_size is 0, we run the risk of triggering a divide
by zero error if we continued with other validation checks. Hence, we should
simply return from this function upon validation failure.
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220513141005.1929422-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
When check queue state in the vhost_dev_set_log routine, it miss the error
routine check, this patch also check queue state in error case.
Fixes: 1e5a050f57 ("check queue state in the vhost_dev_set_log routine")
Signed-off-by: Ni Xun <richardni@tencent.com>
Reviewed-by: Zhigang Lu <tonnylu@tencent.com>
Message-Id: <OS0PR01MB57139163F3F3955960675B52EAA79@OS0PR01MB5713.jpnprd01.prod.outlook.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With address space switch supported, dma access translation only
happen after endpoint is attached to a non-bypass domain.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-4-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching address space with mutex lock hold, mapping will be
replayed for assigned device. This will trigger relock deadlock.
Also release the mutex resource in unrealize routine.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently assigned devices can not work in virtio-iommu bypass mode.
Guest driver fails to probe the device due to DMA failure. And the
reason is because of lacking GPA -> HPA mappings when VM is created.
Add a root container memory region to hold both bypass memory region
and iommu memory region, so the switch between them is supported
just like the implementation in virtual VT-d.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In fetch_or_create_notifier, idx begins with 0. So the GPtrArray size
should be idx + 1 and g_ptr_array_set_size should be called with idx + 1.
This wrong GPtrArray size causes fetch_or_create_notifier return an invalid
address. Passing this invalid pointer to vhost_user_host_notifier_remove
causes assert fail:
qemu/include/qemu/int128.h:27: int128_get64: Assertion `r == a' failed.
shutting down, reason=crashed
Backends like dpdk-vdpa which sends out vhost notifier requests almost always
hit qemu crash.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Change-Id: I87e0f7591ca9a59d210879b260704a2d9e9d6bcd
Message-Id: <20220526034851.683258-1-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Switches were already introduced, but now we support them update
the documentation to provide an example in diagram and
qemu command line parameter forms.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-4-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Emulation of a simple CXL Switch downstream port.
The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-3-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
-----BEGIN PGP SIGNATURE-----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=3ejn
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu into staging
9pfs: fix 'Twalk' protocol violation
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmKrDSAXHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VgoQ//bA/lXYa6hds4f73+opq7iiJ/
# 88gnJO8uPctNWXJ5f6ufXcTFtC99QRcl97jgSQhSIUdaZCfcpg7Pq3fONc060cMt
# MNxi5Da31Fq7xz4UhSQHgWlgAfomfClYoBSOtrrxjVbXChA2rB7FXhD9aewimUtt
# TlolXdJuPbGR3F6H0glN1itij12Ay5c0DMqFPy5npYlzjNhxmPb8QgFZ8E+lxhcT
# hG+OMmS9O5Mk7WKYWC1Iij7tWm45RbThPEUsfCPt6jIJYQqheOQs0ohJG9wyCZu3
# JUCgSBPG1nNY0hgBJ/X7un7e89BoRw8edwqP+sSigfDf+LquUggqRFgz+joTbfvj
# Prq+1NTDIckDRZF6CDUSkZE3+Gq3qlIhw/2vS+bjYZrk04lP4x8d9JYPSkT3i8xc
# +YT/apDUkT68FjJ6PudfS2j6xRtYt86nOuWuhYukTZ2z5FJ0c9XAJlJX2ZS9Az3n
# AqKFCT+8UE4VYKnAJ61xDdqvAdEmKJUi5YutfuwH+j6sS4peLX0gg8mGlNi7y8JK
# bsqNjE1ve8rkp24DuUoHmivs/m1ogJi9Jxp5IjB4d26MPhgojrxOpaYUVg98QS7d
# os2ES47CSn4KFxqsFMZnZpgzKxIvRQ4C9bBbSClDOffHWHRJub6PCw5F9eCTH4dO
# z/QPJ+smDY7bolF+gSg=
# =3ejn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 03:59:44 AM PDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu:
tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistent
tests/9pfs: guard recent 'Twalk' behaviour fix
9pfs: fix 'Twalk' to only send error if no component walked
9pfs: refactor 'name_idx' -> 'nwalked' in v9fs_walk()
tests/9pfs: compare QIDs in fs_walk_none() test
tests/9pfs: Twalk with nwname=0
tests/9pfs: walk to non-existent dir
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend previously added test case by checking that fid was unaffected
by 'Twalk' request (i.e. when 2nd path component of request being
invalid). Do that by subsequently sending a 'Tgetattr' request with
the fid previously used for 'Twalk'; that 'Tgetattr' request should
return an 'Rlerror' response by 9p server with error code ENOENT as
that fid is basically invalid.
And as we are at it, also check that the QID returned by 'Twalk' is
not identical to the root node's QID.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <6f0813cafdbf683cdac8b1492dd4ef8699c5b1d9.1647339025.git.qemu_oss@crudebyte.com>
Previous 9p patch fixed 'Twalk' request handling, which was previously not
behaving as specified by the 9p2000 protocol spec. This patch adds a new test
case which guards the new 'Twalk' behaviour in question.
More specifically: it sends a 'Twalk' request where the 1st path component
is valid, whereas the 2nd path component transmitted to server does not
exist. The expected behaviour is that 9p server would respond by sending
a 'Rwalk' response with exactly 1 QID (instead of 'Rlerror' response).
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <61bde2f44b87e24b70ec098dfb81765665b2dfcb.1647339025.git.qemu_oss@crudebyte.com>
Current implementation of 'Twalk' request handling always sends an 'Rerror'
response if any error occured. The 9p2000 protocol spec says though:
"
If the first element cannot be walked for any reason, Rerror is returned.
Otherwise, the walk will return an Rwalk message containing nwqid qids
corresponding, in order, to the files that are visited by the nwqid
successful elementwise walks; nwqid is therefore either nwname or the index
of the first elementwise walk that failed.
"
http://ericvh.github.io/9p-rfc/rfc9p2000.html#anchor33
For that reason we are no longer leaving from an error path in function
v9fs_walk(), unless really no path component could be walked successfully or
if the request has been interrupted.
Local variable 'nwalked' counts and reflects the number of path components
successfully processed by background I/O thread, whereas local variable
'name_idx' subsequently counts and reflects the number of path components
eventually accepted successfully by 9p server controller portion.
New local variable 'any_err' is an aggregate variable reflecting whether any
error occurred at all, while already existing variable 'err' only reflects
the last error.
Despite QIDs being delivered to client in a more relaxed way now, it is
important to note though that fid still must remain unaffected if any error
occurred.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <bc73e24258a75dc29458024c7936c8a036c3eac5.1647339025.git.qemu_oss@crudebyte.com>
The local variable 'name_idx' is used in two loops in function v9fs_walk().
Let the first loop use its own variable 'nwalked' instead, which we will
use in subsequent patch as the number of (requested) path components
successfully walked by background I/O thread.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <d506308e7e343023c4db95d0e6053dd2627ed3c1.1647339025.git.qemu_oss@crudebyte.com>
Extend previously added fs_walk_none() test by comparing the QID
of the root fid with the QID of the cloned fid. They should be
equal.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5bbe9c6931b4600a9a23742f5ff2d38c1188237d.1647339025.git.qemu_oss@crudebyte.com>
Send Twalk request with nwname=0. In this case no QIDs should
be returned by 9p server; this is equivalent to walking to dot.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <b5ead2775000203607801f09bcefc04c493d8bfa.1647339025.git.qemu_oss@crudebyte.com>
Expect ENOENT Rlerror response when trying to walk to a
non-existent directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Based-on: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com>
Message-Id: <1f5aa50ace3ba3861ea31e8888367518282065a6.1647339025.git.qemu_oss@crudebyte.com>
This pull request includes an important aio=native I/O stall fix, the
experimental vifo-user server, the io_uring_register_ring_fd() optimization for
aio=io_uring, and an update to Vladimir Sementsov-Ogievskiy's maintainership
details.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmKp/+AACgkQnKSrs4Gr
c8gg9wf/ZG1+eGR2NA0T1szlhtgy2bnp95hrLbKzP7tVxueFq7QCcsIsLGWqfnMd
RREUi6Tgx1v7Agk2oIyUcrjn5rt4LPVOKolVbK6e5Pyou2/Sf/ApkhRjRnzzfACE
J56H8gPU7fS4/8sJYCYGlWEr7pMmJMVJFPl2tNsErPwuZMSjo27n6UqDE/ZSZF1p
w1a+cwo+6YSjtJg4AFB/+izBam4+U6w1YhgZM6p6hx5a7GLoq/w59W6Yb119GANO
tg5qzmSHtMKTieORJmYAt83T1xS5d/iyca4w1PiYQxJsHsqwAaPpoyEhgGT+u+CA
hfb3HDdQCFyVKwlKD5H1a+WD/Hr11w==
=zcl8
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request includes an important aio=native I/O stall fix, the
experimental vifo-user server, the io_uring_register_ring_fd() optimization for
aio=io_uring, and an update to Vladimir Sementsov-Ogievskiy's maintainership
details.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmKp/+AACgkQnKSrs4Gr
# c8gg9wf/ZG1+eGR2NA0T1szlhtgy2bnp95hrLbKzP7tVxueFq7QCcsIsLGWqfnMd
# RREUi6Tgx1v7Agk2oIyUcrjn5rt4LPVOKolVbK6e5Pyou2/Sf/ApkhRjRnzzfACE
# J56H8gPU7fS4/8sJYCYGlWEr7pMmJMVJFPl2tNsErPwuZMSjo27n6UqDE/ZSZF1p
# w1a+cwo+6YSjtJg4AFB/+izBam4+U6w1YhgZM6p6hx5a7GLoq/w59W6Yb119GANO
# tg5qzmSHtMKTieORJmYAt83T1xS5d/iyca4w1PiYQxJsHsqwAaPpoyEhgGT+u+CA
# hfb3HDdQCFyVKwlKD5H1a+WD/Hr11w==
# =zcl8
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 08:50:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
linux-aio: explain why max batch is checked in laio_io_unplug()
linux-aio: fix unbalanced plugged counter in laio_io_unplug()
vfio-user: handle reset of remote device
vfio-user: handle device interrupts
vfio-user: handle PCI BAR accesses
vfio-user: handle DMA mappings
vfio-user: IOMMU support for remote device
vfio-user: handle PCI config space accesses
vfio-user: run vfio-user context
vfio-user: find and init PCI device
vfio-user: instantiate vfio-user context
vfio-user: define vfio-user-server object
vfio-user: build library
remote/machine: add vfio-user property
remote/machine: add HotplugHandler for remote machine
qdev: unplug blocker for devices
Use io_uring_register_ring_fd() to skip fd operations
MAINTAINERS: update Vladimir's address and repositories
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It may not be obvious why laio_io_unplug() checks max batch. I discussed
this with Stefano and have added a comment summarizing the reason.
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220609164712.1539045-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Every laio_io_plug() call has a matching laio_io_unplug() call. There is
a plugged counter that tracks the number of levels of plugging and
allows for nesting.
The plugged counter must reflect the balance between laio_io_plug() and
laio_io_unplug() calls accurately. Otherwise I/O stalls occur since
io_submit(2) calls are skipped while plugged.
Reported-by: Nikolay Tenev <nt@storpool.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220609164712.1539045-2-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 68d7946648 ("linux-aio: add `dev_max_batch` parameter to laio_io_unplug()")
[Stefano Garzarella suggested adding a Fixes tag.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds handler to reset a remote device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 112eeadf3bc4c6cdb100bc3f9a6fcfc20b467c1b.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Forward remote device's interrupts to the guest
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-id: 9523479eaafe050677f4de2af5dd0df18c27cfd9.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register callbacks to manage the RAM regions used for
device DMA
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: faacbcd45c4d02c591f0dbfdc19041fbb3eae7eb.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assign separate address space for each device in the remote processes.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: afe0b0a97582cdad42b5b25636a29c523265a10a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define and register handlers for PCI config space accesses
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: be9d2ccf9b1d24e50dcd9c23404dbf284142cec7.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setup a handler to run vfio-user context. The context is driven by
messages to the file descriptor associated with it - get the fd for
the context and hook up the handler with it
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e934b0090529d448b6a7972b21dfc3d7421ce494.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Find the PCI device with specified id. Initialize the device context
with the QEMU PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7798dbd730099b33fdd00c4c202cfe79e5c5c151.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
create a context with the vfio-user library to run a PCI device
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a452871ac8c812ff96fc4f0ce6037f4769953fab.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define vfio-user object which is remote process server for QEMU. Setup
object initialization functions and properties necessary to instantiate
the object
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e45a17001e9b38f451543a664ababdf860e5f2f2.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add vfio-user to x-remote machine. It is a boolean, which indicates if
the machine supports vfio-user protocol. The machine configures the bus
differently vfio-user and multiprocess protocols, so this property
informs it on how to configure the bus.
This property should be short lived. Once vfio-user fully replaces
multiprocess, this property could be removed.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 5d51a152a419cbda35d070b8e49b772b60a7230a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow hotplugging of PCI(e) devices to remote machine
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d1e6cfa0afb528ad343758f9b1d918be0175c5e5.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add blocker to prevent hot-unplug of devices
TYPE_VFIO_USER_SERVER, which is introduced shortly, attaches itself to a
PCIDevice on which it depends. If the attached PCIDevice gets removed
while the server in use, it could cause it crash. To prevent this,
TYPE_VFIO_USER_SERVER adds an unplug blocker for the PCIDevice.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c41ef80b7cc063314d629737bed2159e5713f2e0.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Linux recently added a new io_uring(7) optimization API that QEMU
doesn't take advantage of yet. The liburing library that QEMU uses
has added a corresponding new API calling io_uring_register_ring_fd().
When this API is called after creating the ring, the io_uring_submit()
library function passes a flag to the io_uring_enter(2) syscall
allowing it to skip the ring file descriptor fdget()/fdput()
operations. This saves some CPU cycles.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20220531105011.111082-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While at it, remove a dead assignment and simply inline the value of the
"target" variable, which is used just once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to spec:
"TSEG Enable (T_EN): Enabling of SMRAM memory for Extended SMRAM space
only. When G_SMRAME = 1 and TSEG_EN = 1, the TSEG is enabled to appear
in the appropriate physical address space. Note that once D_LCK is set,
this bit becomes read only."
Changed to match the spec description.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220615034501.2733802-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The existing check has two problems:
1. Meson uses a private directory for the get_supported_arguments check.
./instrumentation-filter does not exist in that private directory (it is
copied into the root of the build-directory).
2. fsanitize-coverage-allowlist is unused when coverage instrumentation
is not configured. No instrumentation are passed for the
get_supported_arguments check
Thus the check always fails. To work around this, change the check to an
"if cc.compiles" check and provide /dev/null, instead of the real
filter.
Meson log:
Working directory: build/meson-private/tmpl6wld2d9
Command line: clang-13 -m64 -mcx16
build/meson-private/tmpl6wld2d9/output.obj -c -O3 -D_FILE_OFFSET_BITS=64
-O0 -Werror=implicit-function-declaration -Werror=unknown-warning-option
-Werror=unused-command-line-argument
-Werror=ignored-optimization-argument
-fsanitize-coverage-allowlist=instrumentation-filter
Error:
error: argument unused during compilation:
'-fsanitize-coverage-allowlist=instrumentation-filter'
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220614155415.4023833-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tests/vm/Makefile.include used to assume that it could run in an unconfigured
source tree, and Cirrus CI relies on that. It was however broken by commit
f4c66f1705 ("tests: use tests/venv to run basevm.py-based scripts", 2022-06-06),
which co-opted the virtual environment being used by avocado tests
to also run the basevm.py tests.
For now, reintroduce the usage of qemu.qmp from the source directory, but
without the sys.path() hacks. The CI configuration can be changed to
install the package via pip when qemu.qmp is removed from the source tree.
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place it only inside the 'if test "$pie" = "no"' conditional. Since
commit 43924d1e53 ("pc-bios/optionrom: detect -fno-pie", 2022-05-12),
the PIE options are detected independently by pc-bios/optionrom/Makefile,
and the CFLAGS_NOPIE/LDFLAGS_NOPIE variables are not used anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
