libssh2_sftp_fsync is an extension to libssh2 to support fsync(2) over
sftp, which is itself an extension of OpenSSH.
If both libssh2 and the ssh daemon support it, this will allow
bdrv_flush_to_disk to commit changes through to disk on the remote
server.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-system-x86_64 -drive file=ssh://hostname/some/image
QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.
You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...). You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).
Current limitations:
- Authentication must be done without passwords or passphrases, using
ssh-agent. Other authentication methods are not supported.
- Uses a single connection, instead of concurrent AIO with multiple
SSH connections.
This is implemented using libssh2 on the client side. The server just
requires a regular ssh daemon with sftp-server support. Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
What is the highest addressable sector on an empty CD-ROM? Nothing is
addressable so produce an error.
This patch prevents a divide-by-zero in ide_set_sector() since
s->sectors and s->heads would be 0. Not to mention that a sector=-1
argument would be nonsense.
Note that WIN_READ_NATIVE_MAX can be triggered using hdparm -N 1024
/dev/cdrom. The LBA bit will be set to 1 though, so the only easy way
to go down the ide_set_sector() CHS code path which divides by zero is
to comment out the s->select & 0x40 case for testing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of breaking up RAM state into many small chunks, pass the iovec
to the block layer for better performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Known bugs in to_json():
* A start byte for a three-byte sequence followed by less than two
continuation bytes is split into one-byte sequences.
* Start bytes for sequences longer than three bytes get misinterpreted
as start bytes for three-byte sequences. Continuation bytes beyond
byte three become one-byte sequences.
This means all characters outside the BMP are decoded incorrectly.
* One-byte sequences with the MSB are put into the JSON string
verbatim when char is unsigned, producing invalid UTF-8. When char
is signed, they're replaced by "\\uFFFF" instead.
This includes \xFE, \xFF, and stray continuation bytes.
* Overlong sequences are happily accepted, unless screwed up by the
bugs above.
* Likewise, sequences encoding surrogate code points or noncharacters.
* Unlike other control characters, ASCII DEL is not escaped. Except
in overlong encodings.
My rewrite fixes them as follows:
* Malformed UTF-8 sequences are replaced.
Except the overlong encoding \xC0\x80 of U+0000 is still accepted.
Permits embedding NUL characters in C strings. This trick is known
as "Modified UTF-8".
* Sequences encoding code points beyond Unicode range are replaced.
* Sequences encoding code points beyond the BMP produce a surrogate
pair.
* Sequences encoding surrogate code points are replaced.
* Sequences encoding noncharacters are replaced.
* ASCII DEL is now always escaped.
The replacement character is U+FFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Test cases cover the two noncharacters in the BMP. Add tests for the
other 64 noncharacters.
Three existing test cases involve noncharacters U+FFFF and U+10FFFF.
Instead of deleting them as now duplicates, adjust them to use U+FFFC
and U+10FFFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'mingw' of git://qemu.weilnetz.de/qemu:
qemu-timer: move timeBeginPeriod/timeEndPeriod to os-win32
Release SMP restriction on Windows
Ensure good ordering of memory instruction in cpu_exec
Check effective suspension of TCG thread
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove static attribute to Td[0-5] and Te[0-5] tables so that they
can be used outside of aes.c. Change their type from u32 to uint32_t,
to keep the u32 udef local to aes.c. Prefix them with AES_ so that they
do not conflict with other symbols.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The PCLMULQDQ instruction has been introduced on the Westmere CPU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This brings us a step closer to QOM'ified SH7750 SoC and
fixes b350ab75 (target-sh4: Move PVR/PRR/CVR into SuperHCPUClass)
assuming SuperHCPU type for SUPERH_CPU_GET_CLASS().
Fix Coding Style issues while at it (indentation, braces).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Print an error message as done for the r2d machine and exit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'tci' of git://qemu.weilnetz.de/qemu:
tci: Make tcg temporaries local to tcg_qemu_tb_exec
tci: Delete unused tb_ret_addr
tci: Avoid code before declarations
tci: Use a local variable for env
tci: Use 32-bit signed offsets to loads/stores
* 'tcg-s390' of git://github.com/rth7680/qemu:
tcg-s390: Fix merge error in tgen_brcond
tcg-s390: Use all 20 bits of the offset in tcg_out_mem
tcg-s390: Use load-address for addition
tcg-s390: Cleanup argument shuffling fixme in softmmu code
tcg-s390: Use risbgz for andi
tcg-s390: Remove constraint letters for and
tcg-s390: Implement deposit opcodes
tcg-s390: Implement movcond opcodes
tcg-s390: Implement mulu2_i64 opcode
tcg-s390: Implement add2/sub2 opcodes
tcg-s390: Remove useless preprocessor conditions
tcg-s390: Properly allocate a stack frame.
tcg-s390: Fix movi
These are needed for any of the Win32 alarm timer implementations.
They are not tied to mmtimer exclusively.
Jacob tested this patch with both mmtimer and Win32 timers.
Cc: qemu-stable@nongnu.org
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The previous patches make QEMU SMP safe on Windows, we can now release
the restriction.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The IO thread, when it senses cpu_single_env == 0, expects exit_request
to be checked later on. A compiler scheduling constraint is not strong
enough to ensure this on modern architecture. A memory fence is needed
as well.
Signed-off-by: Olivier Hainque <hainque@adacore.com>
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
On multi-core systems, SuspendThread does not guaranty immediate thread
suspension. We add busy loop to wait for effective thread suspension
after call to ThreadSuspend().
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The CONFIG_DEBUG_EXEC define compiles out a single qemu_log_mask()
call, which is a pretty trivial cost even for something in the main
cpu_exec() loop. Having this be conditionally defined means that
'-d exec' on a non-debug build will silently do nothing. Drop the
define and the configure machinery that sets it, in favour of just
always allowing this log option to be enabled at runtime. As a
concession to the mainloopiness, we use qemu_loglevel_mask()+qemu_log()
rather than qemu_log_mask() to avoid the function call overhead.
Note that DEBUG_DISAS is always defined, so removing the
'|| defined(CONFIG_DEBUG_EXEC)' from those conditionals makes
no behavioural change for that logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This change makes conversion of TARGET_O_NONBLOCK and TARGET_O_CLOEXEC flags
to host flags before calling eventfd for TARGET_NR_eventfd2.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Register the CPU VMState in the correct way, via cpu_class_set_vmsd(),
rather than doing it in two different wrong ways (once by providing
cpu_save and cpu_load functions, and once by setting the vmsd field in
DeviceClass).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We're moving away from the temporaries stored in env. Make sure we can
differentiate between temp stores and possibly bogus stores for extra
call arguments. Move TCG_AREG0 and TCG_REG_CALL_STACK out of the way
of the parameter passing registers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off by: Stefan Weil <sw@weilnetz.de>
This only valid with c99 extensions enabled, and easy to avoid.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off by: Stefan Weil <sw@weilnetz.de>
Since we have total conversion away from global AREG0, we do not
need a global variable named "env". Retain that name as the
function parameter inside the interpreter.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off by: Stefan Weil <sw@weilnetz.de>
Since the change to tcg_exit_req, the first insn of every TB is
a load with a negative offset from env.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off by: Stefan Weil <sw@weilnetz.de>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
