Commit 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
added error checking for KVM_SET_SREGS/KVM_SET_SREGS2. In doing so, it
exposed a long-running bug in current KVM support for SEV-ES where the
kernel assumes that MSR_EFER_LMA will be set explicitly by the guest
kernel, in which case EFER write traps would result in KVM eventually
seeing MSR_EFER_LMA get set and recording it in such a way that it would
be subsequently visible when accessing it via KVM_GET_SREGS/etc.
However, guest kernels currently rely on MSR_EFER_LMA getting set
automatically when MSR_EFER_LME is set and paging is enabled via
CR0_PG_MASK. As a result, the EFER write traps don't actually expose the
MSR_EFER_LMA bit, even though it is set internally, and when QEMU
subsequently tries to pass this EFER value back to KVM via
KVM_SET_SREGS* it will fail various sanity checks and return -EINVAL,
which is now considered fatal due to the aforementioned QEMU commit.
This can be addressed by inferring the MSR_EFER_LMA bit being set when
paging is enabled and MSR_EFER_LME is set, and synthesizing it to ensure
the expected bits are all present in subsequent handling on the host
side.
Ultimately, this handling will be implemented in the host kernel, but to
avoid breaking QEMU's SEV-ES support when using older host kernels, the
same handling can be done in QEMU just after fetching the register
values via KVM_GET_SREGS*. Implement that here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Lara Lazier <laramglazier@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: <kvm@vger.kernel.org>
Fixes: 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231206155821.1194551-1-michael.roth@amd.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmVurjcACgkQEuIgTA5d
tgLWVBAAkzus4nN2+Z0H23VUmeBPCLPFXRSkK8mOWC3ymbX3kiy/IjgM7Ept6QWA
btssTf3YEeDtycgbrb5GZ4kEfKThDN7bbGRHvCW5bjwkyLQN1Ys2K61CTRX0VhSi
U4HDE3gCm+LpO28BuV/1KunlSH4TWjt76AB6YG5PuyzSH+AbC8yY7m+VSJTmCw1k
cZv0TQ+9lqWc4C6ziETV8UqhhltBmd/57P3xFDKhYNl0EtzxnKGSZ2szzWqE7guY
DsmTlfB5bnkYPE51xxTcJnRj907utNrIfa2kbu9wXU/GuPuEf9QkDo1Dt3t1Z0Zm
OZPkloXC2eNufVcGYVJa2PylRjwFlg01IuhYmlhsgerg5LZz2RIyrWM61JTONF2J
6EvO89e2S3XpBbnl2ugf2rMIdW1tlLSWhnLZD+jZzOu+V2TeLm6/onHWCVQ02sLr
ddDVpf2djvUsmRvcBBYlI40FcC9Wt828Spm+wkRsGHC+VbAg2al6jRNXyJ2LWeiS
wGsAwRV6XhQz996uMOWTA7jEsAawHUFgYCsH4bgiqiWEn+FblufY2iicRxY4ZsJA
GXpvxGoUHWE8e0XjXG1BnRFo2Q5ns9SRl5gx5X7rcmIKUGGCh3ZI72zfeVgCjm7b
5/CV/YzKuCRWJCYcORguli1GVuPO01FJrBloTJc0OSaDAtZL2Mg=
=o2kr
-----END PGP SIGNATURE-----
Merge tag 'pull-ufs-20231205' of https://gitlab.com/jeuk20.kim/qemu into staging
ufs fixes for 8.2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmVurjcACgkQEuIgTA5d
# tgLWVBAAkzus4nN2+Z0H23VUmeBPCLPFXRSkK8mOWC3ymbX3kiy/IjgM7Ept6QWA
# btssTf3YEeDtycgbrb5GZ4kEfKThDN7bbGRHvCW5bjwkyLQN1Ys2K61CTRX0VhSi
# U4HDE3gCm+LpO28BuV/1KunlSH4TWjt76AB6YG5PuyzSH+AbC8yY7m+VSJTmCw1k
# cZv0TQ+9lqWc4C6ziETV8UqhhltBmd/57P3xFDKhYNl0EtzxnKGSZ2szzWqE7guY
# DsmTlfB5bnkYPE51xxTcJnRj907utNrIfa2kbu9wXU/GuPuEf9QkDo1Dt3t1Z0Zm
# OZPkloXC2eNufVcGYVJa2PylRjwFlg01IuhYmlhsgerg5LZz2RIyrWM61JTONF2J
# 6EvO89e2S3XpBbnl2ugf2rMIdW1tlLSWhnLZD+jZzOu+V2TeLm6/onHWCVQ02sLr
# ddDVpf2djvUsmRvcBBYlI40FcC9Wt828Spm+wkRsGHC+VbAg2al6jRNXyJ2LWeiS
# wGsAwRV6XhQz996uMOWTA7jEsAawHUFgYCsH4bgiqiWEn+FblufY2iicRxY4ZsJA
# GXpvxGoUHWE8e0XjXG1BnRFo2Q5ns9SRl5gx5X7rcmIKUGGCh3ZI72zfeVgCjm7b
# 5/CV/YzKuCRWJCYcORguli1GVuPO01FJrBloTJc0OSaDAtZL2Mg=
# =o2kr
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Dec 2023 23:59:35 EST
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20231205' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: avoid generating the same ID string for different LU devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU would not start when trying to create two UFS host controllers and
a UFS logical unit for each with the following options:
-device ufs,id=bus0 \
-device ufs-lu,drive=drive1,bus=bus0,lun=0 \
-device ufs,id=bus1 \
-device ufs-lu,drive=drive2,bus=bus1,lun=0 \
This is because the same ID string ("0:0:0/scsi-disk") is generated
for both UFS logical units.
To fix this issue, prepend the parent pci device's path to make
the ID string unique.
("0000:00:03.0/0:0:0/scsi-disk" and "0000:00:04.0/0:0:0/scsi-disk")
Resolves: #2018
Fixes: 096434fea1 ("hw/ufs: Modify lu.c to share codes with SCSI subsystem")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231204150543.48252-1-akinobu.mita@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
* Turn off SME if SVE is turned off (this combination doesn't
currently work and QEMU will assert if you try it)
-----BEGIN PGP SIGNATURE-----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=K/u0
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231204-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Turn off SME if SVE is turned off (this combination doesn't
currently work and QEMU will assert if you try it)
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVt3wQZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vrmD/9zu48IxCdHFSshMRmXz6kI
# tMvTrsMSOGXfuQqCbvLn3CUP/La50Yt/T1C2TKzVII1W8zpw8wEEvraCBjexzUzK
# Jcjw0dPSIllQOHBkoUGsgqA0+UkhfIwH0po10rxm1L+ZP3DfISVdyDV9oxCNfEO0
# pGXI1eAN9GIQtJtUj3kZE+RUoamJfoSjlm5XVeX3T+utEU7yf1461L1/qaylYOrW
# wao72ffbuf41jRJwnVmMFoIPrwueYtEeuKl/EgYU4YPxkSQEo34u6d9fz2Irt6/Y
# utO2SffhhmlxQaFhgPX3hvAsfapMt/p2Jy6oUpThOjN75adCq+g1CYj7lzEfIX16
# kb2CY8zQ8NboJtgnkiQAA062myURnk/kmulv0OF6Hh0jHSuLzuMMLcCfBJgq4H6s
# mnBCJfetwRgwqcSl1JTfrMm4wYOLmSrmOcM5JjYwY2YYjnFXI+XB1MdKm0h8cROG
# nFu5TZtNnxgzqBgoh1140AYN851Y1dshczZIHb1/YuNpBIl+ZUO4v5sRT3KBSzb+
# G21570neBv8QcfDSgrLesrjNBDREfkaWEu9BM85461uTjbCLG8RUpn+Jd4VtpkNe
# YVzomhuM9CI5CmYdrTMJ74gnZUtAT9Q3FTcfGL8G4KiSIe85BTw+gEy4PhLXD6FT
# 68fP1M+s8/hsuXCJYbvmAA==
# =K/u0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Dec 2023 09:15:32 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20231204-1' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Disable SME if SVE is disabled
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I missed this when going through the recent failure logs. I can run
the test 30 times without failure locally but it seems to hang pretty
reliably on GitLab's CI infra-structure.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231201201027.2689404-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() use an 'int ret' variable
that is used to do an early 'return' if ret > 0. Both are being called
in functions that are also declaring a 'ret' integer, initialized with
'0', and this integer is used as return of the function.
The result is that the compiler is less than pleased and is pointing
shadowing errors:
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_get_regs_csr':
../target/riscv/kvm/kvm-cpu.c:90:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
90 | int ret = kvm_get_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:539:5: note: in expansion of macro 'KVM_RISCV_GET_CSR'
539 | KVM_RISCV_GET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:536:9: note: shadowed declaration is here
536 | int ret = 0;
| ^~~
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_put_regs_csr':
../target/riscv/kvm/kvm-cpu.c:98:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
98 | int ret = kvm_set_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:556:5: note: in expansion of macro 'KVM_RISCV_SET_CSR'
556 | KVM_RISCV_SET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:553:9: note: shadowed declaration is here
553 | int ret = 0;
| ^~~
The macros are doing early returns for non-zero returns and the local
'ret' variable for both functions is used just to do 'return 0', so
remove them from kvm_riscv_get_regs_csr() and kvm_riscv_put_regs_csr()
and do a straight 'return 0' in the end.
For good measure let's also rename the 'ret' variables in
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() to '_ret' to make them more
resilient to these kind of errors.
Fixes: 937f0b4512 ("target/riscv: Implement kvm_arch_get_registers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231123101338.1040134-1-dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Using direct pointer dereferencing can allow for unaligned accesses,
which was seen during execution with sanitizers enabled.
Cc: qemu-stable@nongnu.org
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Peter Foley <pefoley@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231116163633.276671-1-venture@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These variables "ret" are never referenced in the code, thus
add check logic for the "ret"
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231121080802.4500-1-zhujun2@cmss.chinamobile.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replaces TABS with spaces to ensure have a consistent coding
style with an indentation of 4 spaces in the SH4 subsystem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/376
Signed-off-by: Yihuan Pan <xun794@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231124044554.513752-1-xun794@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use 'unsupported_configs' and 'tested_configs' here
instead of non-inclusive words.
Message-ID: <20231122084000.809696-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no architectural requirement that SME implies SVE, but
our implementation currently assumes it. (FEAT_SME_FA64 does
imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off"
you quickly run into an assert when the guest tries to write to
SMCR_EL1:
#6 0x00007ffff4b38e96 in __GI___assert_fail
(assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101
#7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865
#8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871
#9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995
#10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839
#11 0x00007fff60056781 in code_gen_buffer ()
Avoid this unsupported and slightly odd combination by
disabling SME when SVE is not present.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231127173318.674758-1-peter.maydell@linaro.org
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
wHXYpLbD5jkthqav5E0DObCF9gIZdA==
=qtvU
-----END PGP SIGNATURE-----
Merge tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu into staging
Flaky avocado tests, gdbstub and gitlab tweaks
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
# KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
# YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
# ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
# 486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
# t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
# wHXYpLbD5jkthqav5E0DObCF9gIZdA==
# =qtvU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Dec 2023 12:48:08 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu:
gitlab: add optional job to run flaky avocado tests
gitlab: build the correct microblaze target
tests/avocado: tag sbsa tests as tcg only
docs/devel: rationalise unstable gitlab tests under FLAKY_TESTS
gdbstub: use a better signal when we halt for IO reasons
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-sound device is currently not migratable. QEMU crashes
on the source machine at some point during the migration with a
segmentation fault.
Even with this bug fixed, the virtio-sound device doesn't migrate
the state of the audio streams. For example, running streams leave
the device on the destination machine in a broken condition.
Mark the device as unmigratable until these issues have been fixed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231204072837.6058-1-vr_qemu@t-online.de>
Commit d921fea338 ("ui/vnc-clipboard: fix infinite loop in
inflate_buffer (CVE-2023-3255)") removed this hunk, but it is still
required, because it can happen that stream.avail_in becomes zero
before coming across a return value of Z_STREAM_END in the loop.
This fixes the host->guest direction of the clipboard with noVNC and
TigerVNC as clients.
Fixes: d921fea338 ("ui/vnc-clipboard: fix infinite loop in inflate_buffer (CVE-2023-3255)")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231122125826.228189-1-f.ebner@proxmox.com>
Commit 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing
scanout") introduced a regression when QEMU is running with a
virtio-gpu-gl-device on a host under X11. After the guest has
initialized the virtio-gpu-gl-device, the guest screen only
shows "Display output is not active.".
Commit 6f189a08c1 moved all function calls in
gd_egl_scanout_texture() to a code path which is only called
once after gd_egl_init() succeeds in gd_egl_scanout_texture().
Move all function calls in gd_egl_scanout_texture() back to
the regular code path so they get always called if one of the
gd_egl_init() calls was successful.
Fixes: 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing scanout")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231111104020.26183-1-vr_qemu@t-online.de>
Keep it the same to vhost-user-blk.
At the same time, fix the vhost_reset_device.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-3-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the error occurs in vhost_dev_init, the value of s->connected is set to true
in advance, and there is no chance to enter this function execution again
in the future.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the rollback in msix_set_vector_notifiers(), original patch forgot to
undo msix_vector_poll_notifier pointer.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Robert Hoo <robert.hoo.linux@gmail.com>
Message-Id: <20231113081349.1307-1-robert.hoo.linux@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code already checks iommu_mr is not NULL so there is no
need to check container_of() is not NULL. Remove the check.
Fixes: CID 1523901
Fixes: 09b4c3d6a2 ("virtio-iommu: Record whether a probe request has
been issued")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-Id: <20231109170715.259520-1-eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`kvm_enabled()` is compiled down to `0` and short-circuit logic is
used to remove references to undefined symbols at the compile stage.
Some build configurations with some compilers don't attempt to
simplify this logic down in some cases (the pattern appears to be
that the literal false must be the first term) and this was causing
some builds to emit references to undefined symbols.
An example of such a configuration is clang 16.0.6 with the following
configure: ./configure --enable-debug --without-default-features
--target-list=x86_64-softmmu --enable-tcg-interpreter
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Message-Id: <20231119203116.3027230-1-dhoff749@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
erst_realizefn() passes @errp to functions without checking for
failure. If it runs into another failure, it trips error_setv()'s
assertion.
Use the ERRP_GUARD() macro and check *errp, as suggested in commit
ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120130017.81286-1-philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_new() aborts if the allocation fails so it returns NULL only if the
requested allocation size is zero. register_vfs() makes such an
allocation if NumVFs is zero so it should not assert that g_new()
returns a non-NULL value.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Buglink: https://issues.redhat.com/browse/RHEL-17209
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231123075630.12057-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yanghang Liu<yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <<a href="mailto:clg@redhat.com" target="_blank">clg@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes on exit when a virtio-sound device has failed to
realise. Its vmstate field was not cleaned up properly with
qemu_del_vm_change_state_handler().
This patch changes the realize() order as
1. Validate the given configuration values (no resources allocated
by us either on success or failure)
2. Try AUD_register_card() and return on failure (no resources allocated
by us on failure)
3. Initialize vmstate, virtio device, heap allocations and stream
parameters at once.
If error occurs, goto error_cleanup label which calls
virtio_snd_unrealize(). This cleans up all resources made in steps
1-3.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 2880e676c0 ("Add virtio-sound device stub")
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231116072046.4002957-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
AUD_register_card might fail. Even though errp was passed as an
argument, the call's return value was not checked for failure.
Fixes: Coverity CID 1523899
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231109162034.2108018-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit b7639b7dd0 ("hw/audio: Simplify hda audio init") inverted
the sense of hda codec property mixer during initialization.
Change the code so that mixer=on enables the hda mixer emulation
and mixer=off disables the hda mixer emulation.
With this change audio playback and recording streams don't start
muted by default.
Fixes: b7639b7dd0 ("hw/audio: Simplify hda audio init")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-2-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After a relatively short time, there is an multiplication overflow
when multiplying (now - buft_start) with hda_bytes_per_second().
While the uptime now - buft_start only overflows after 2**63 ns
= 292.27 years, this happens hda_bytes_per_second() times faster
with the multiplication. At 44100 samples/s * 2 channels
* 2 bytes/channel = 176400 bytes/s that is 14.52 hours. After the
multiplication overflow the affected audio stream stalls.
Replace the multiplication and following division with muldiv64()
to prevent a multiplication overflow.
Fixes: 280c1e1cdb ("audio/hda: create millisecond timers that handle IO")
Reported-by: M_O_Bz <m_o_bz@163.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-1-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio sound device is currently an unclassified PCI device.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Unclassified device [00ff]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Set the correct PCI class code to change the device to a
multimedia audio controller.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Multimedia audio controller [0401]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231107185034.6434-1-vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
One problem with flaky tests is they often only fail under CI
conditions which makes it hard to debug. We add an optional allow_fail
job so developers can trigger the only the flaky tests in the CI
environment if they are debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-8-alex.bennee@linaro.org>
We inadvertently built the LE target for BE tests.
Fixes: 78ebc00b06 (gitlab: shuffle some targets and reduce avocado noise)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-7-alex.bennee@linaro.org>
As firmware runs at a higher privilege level than the hypervisor we
can only run these tests under TCG emulation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-6-alex.bennee@linaro.org>
migrate_uri_parse() allocates memory to 'channel' if the user
opts for old syntax - uri, which is leaked because there is no
code for freeing 'channel'.
So, free channel to avoid memory leak in case where 'channels'
is empty and uri parsing is required.
Fixes: 5994024f ("migration: Implement MigrateChannelList to qmp migration flow")
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20231129204301.131228-1-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It doesn't make sense to have two classes of flaky tests. While it may
take the constrained environment of CI to trigger failures easily it
doesn't mean they don't occasionally happen on developer machines. As
CI is the gating factor to passing there is no point developers
running the tests locally anyway unless they are trying to fix things.
While we are at it update the language in the docs to discourage the
QEMU_TEST_FLAKY_TESTS becoming a permanent solution.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-3-alex.bennee@linaro.org>
The gdb description GDB_SIGNAL_IO is "I/O possible" and by default gdb
will try and restart the guest, getting us nowhere. Report
GDB_SIGNAL_STOP instead which should at least halt the session at the
failure point.
Reviewed-by: Luis Machado <luis.machado@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-2-alex.bennee@linaro.org>
netdev test keeps failing sometimes.
I don't think we should increase the timeout some more:
let's try something else instead, testing how busy the
system is.
Seems to work for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
getloadavg is supported on Linux, BSDs, Solaris.
Following man page:
RETURN VALUE
If the load average was unobtainable, -1 is returned; otherwise,
the number of samples actually retrieved is returned.
accordingly, make stub for systems which don't support this function return -1
for consistency.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
require out of tree binary blob.
* SLOF update to fix virtio serial bugs.
-----BEGIN PGP SIGNATURE-----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=7rvy
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-8.2-20231130' of https://gitlab.com/npiggin/qemu into staging
* Add a default BIOS for the new amigaone machine so it does not
require out of tree binary blob.
* SLOF update to fix virtio serial bugs.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmVof8kACgkQZ7MCdqhi
# HK71ng//TCpoi02/aZY5kAd1a1NxvRDd/gR9d5y79TaixgJ9FoV7joNg7Labu21r
# Gezghpgj7Ph+Wy175/qYhIJJ6JheK6xsAb7JmCJUq5HeOixJHkK0xHCJ0uGf1tcb
# c24+6JYa7K1Yd48EhGQUDwd+7J7QeAKPyJLSZHG2Qg9+sPX2koxa9tzZMoaWoA2L
# pMfXhUTBiK6Q93FtrQw16pRUcGrY542wLeA/nRaUFtuPdv38TDmJ4ktnid27fIh5
# 1+QVGQD0HCO29SVT/VP1TJenJukrYVjBfT8ulVC/wo53tZHhNSDVffXbRijrVFlX
# CPowJ2UebPwpvnvv8F8CSGPL4XPI+IBVdUOwZZMkH5oGaMXQW6mP4zsB7TK+g5z3
# 8+hQ0VZS0MzrrfSqufup8SUJAqJ1Sckx104clrpXtrBSAoiF634Qi1+UurwDVLFS
# VibKnMl31LauNRIWXVfj4BYOdH9oHOEHR5ghoaRguOAe58N7fGNiXC/WnScWbp8r
# PXE9D7SUMPtxNejDFRam+Df7JwTY+CdB56uvZ/behgs3FABfMmqBX+WgBbNhLaP4
# B4Wa0MTOAHz3itXRHYtvd6n3M9ts4nU88Srkuf0akAzp4Nv4b3+isuIncUazDREt
# q2z94oolhuZarLhsi/8Qo2G/SfJBNM0s4fmx4NTrqscupl5SadM=
# =7rvy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Nov 2023 07:27:53 EST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-8.2-20231130' of https://gitlab.com/npiggin/qemu:
ppc/amigaone: Allow running AmigaOS without firmware image
pseries: Update SLOF firmware image
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
In this pull request:
- fix form p-ioc set too soon
- free 'saddr' at the right time
Please, apply.
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1090495323
-----BEGIN PGP SIGNATURE-----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=5Img
-----END PGP SIGNATURE-----
Merge tag 'migration-20231130-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231130)
Hi
In this pull request:
- fix form p-ioc set too soon
- free 'saddr' at the right time
Please, apply.
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1090495323
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVoZrgACgkQ9IfvGFhy
# 1yOS6BAA2Rag1bz2yrI/Gts+J/+pVu3a8AZh0lu8J5nABkFSGwrQ5RfVuSuq1Cwt
# j9uctmt9qAEbbLeFsTf/CYCxO4R1RDhOw78o7YfPZPiUFOAvuZB+gHCGA+NH1YH7
# a8uzh/yQ0wSQSKrkFHKV7A1Kli7k6c8iYo3v9ibJDqphUpOfjSPLB22hmRqRp/gy
# 2ZQH/mxj9xlkYxQ/WUKVVl3weXbshbniuQ3RM3HnZYzzWlam4PjI+rAyAF6jhmf6
# ReKDm4n55jTNZXXd9Wa5PZQ7g55BwO1suJfGeojJGsdgfqsFXf/TTwRdmvxOMg/V
# 5X/Eo8GxMF2Vf3pul/m3eNmKvlP0Bh+VlN8dF+Ii8ZXawOEsJpXcCE2yNpXn4UqP
# nyaTznnel2QCDMNWaQNHVbGXFc+n5ocwEnDmO5Idwp5W3/+MFM+xP05FpnshpR0h
# 1vq5dUO/mq5jIoYK//iIXe99rHoIJlOP6SRdtTyxRBhJLg76YKRYmF3RaU51B9n4
# qWLWhDQBwbdv0ZEPZIAhDlO5grY9BRQT5aGNLRsLWL0rY4nJtYdVv8/MyISlNCD8
# eY8SOB0cs/vaLG7Nfj0tboXMAh5sPCXxqx25pVf+x+09EJhD1VZ+axTjbnJmRTs/
# nL5tmQ2EPvFzoVzxeOHdEK+jXdJYWBZf6LBlPY1HN+Gt3JjIecE=
# =5Img
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Nov 2023 05:40:56 EST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231130-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: free 'saddr' since be no longer used
migration/multifd: Stop setting p->ioc before connecting
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The machine uses a modified U-Boot under GPL license but the sources
of it are lost with only a binary available so it cannot be included
in QEMU. Allow running without the firmware image which can be used
when calling a boot loader directly and thus simplifying booting
guests. We need a small routine that AmigaOS calls from ROM which is
added in this case to allow booting AmigaOS without external firmware
image.
Fixes: d9656f860a ("hw/ppc: Add emulation of AmigaOne XE board")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since socket_parse() will allocate memory for 'saddr',and its value
will pass to 'addr' that allocated by migrate_uri_parse(),
then 'saddr' will no longer used,need to free.
But due to 'saddr->u' is shallow copying the contents of the union,
the members of this union containing allocated strings,and will be used after that.
So just free 'saddr' itself without doing a deep free on the contents of the SocketAddress.
Fixes: 72a8192e22 ("migration: convert migration 'uri' into 'MigrateAddress'")
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231120031428.908295-1-zhouzongmin@kylinos.cn>
This is being shadowed but the assignments at
multifd_channel_connect() and multifd_tls_channel_connect() .
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231110200241.20679-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
