Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the code in the secondary CPU boot stubs so that it correctly
initialises the GIC rather than relying on bugs or implementation
dependent aspects of the QEMU GIC implementation:
* set the GIC_PMR.Priority field to all-ones, so that all
interrupts are passed through. The default of all-zeroes
means all interrupts are masked, and QEMU only booted because
of a bug in the priority masking in our GIC implementation.
* add a barrier after GIC setup and before WFI to ensure that
GIC config is complete before we go into a possible low power
state. This isn't needed with the software GIC model but could
be required when using KVM and executing this code on the
real hardware CPU.
Note that of the three secondary stub implementations, only
the common generic one needs to support both v6 and v7 DSB
encodings; highbank and exynos4210 will always be v7 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
To avoid continually having to bump the initrd load address
to account for larger kernel images, put the initrd halfway
through RAM. This allows large kernels on new boards with lots
of RAM to work OK, without breaking existing usecases for
boards with only 32MB of RAM.
Note that this change fixes in passing a bug where we were
passing an overly large max_size to load_image_targphys()
for the initrd, which meant that we wouldn't correctly refuse
to load an enormous initrd that didn't actually fit into RAM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support the case where the device tree blob specifies that
#address-cells and #size-cells are greater than 1. (This
is needed for device trees which can handle 64 bit physical
addresses and thus total RAM sizes over 4GB.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The legacy ATAGS format for passing information to the kernel only
allows RAM sizes which fit in 32 bits; enforce this restriction
rather than silently doing something weird.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Clean up the mix of getting the RAM size from the global ram_size
and from the ram_size field in the arm_boot_info structure, so
that we always use the structure field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The DTB command line should only be overwritten if the user provides a command
line with -append. Otherwise whatever command line was in the DTB should stay
unchanged.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In particular this simplifies the &s->mpu->cpu->env expression again.
first_cpu and ->next_cpu are expected to be QOM'ified later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Adapt exynos4210 and highbank accordingly.
The parameter itself is unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Allows us to use cpu_reset() in place of cpu_state_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The parameters initrd_size and base are already included
in the info parameter, so there is no need to pass them
separately.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>,
Support passing a board ID value to the kernel in r1
that is more than 16 bits wide. This is needed to pass
the '-1 == invalid' value for boards which only support
device tree booting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(),
to allow platforms more control of how secondary CPUs are brought up. The
new functions default to NULL and aren't called unless they are populated
so there are no changes to existing platform models.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The secondary CPU bootloader in arm_boot.c holds secondary CPUs in a
pen until the primary CPU releases them. Make boards specify the
address to be polled to determine whether to leave the pen (it was
previously hardcoded to 0x10000030, which is a Versatile Express/
Realview specific system register address).
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Parameter 'info' is const, so add the missing attribute.
v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Newer kernels are large enough that they can overlap the address
where qemu places the initrd. Move the initrd up so that there is
enough space for the kernel again.
Unfortunately it's not possible to automatically determine the
size of the kernel if it is compressed, so this is the best we
can do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Integrate secondary CPU reset into arm_boot, removing it from realview.c.
On non-Linux systems secondary CPUs start with the same entry as the boot
CPU.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Booting an arm kernel has been broken a while when booting from non zero start
address. This is due to the order of events: board init loads the kernel and
sets register 15 to the start address and then qemu_system_reset reset the cpu
making register 15 zero again.
This patch fixes the usage of the register 15 start address trick in
combination with arm_load_kernel.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.
This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.
The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make MPCore secondary cpu initialization work with the new reset
handling. Also change the inital FLAG value from 3 to zero to match
recent kenrels.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Since 45a50b1 load_image_targphys should only be called once.
ARM boards incorrectly call it every time the system is reset.
Signed-off-by: Paul Brook <paul@codesourcery.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.
Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.
Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix remaining arm warnings - except for the mess in the NetWinder FP
emulator.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6766 c046a42c-6fe2-441c-8c8c-71466251a162
u-boot is a firmware. uImage is an executable file format.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5764 c046a42c-6fe2-441c-8c8c-71466251a162
Return the base address at which the image was loaded so that callers may keep
track of currently occupied guest memory.
This will be required by the PPC 440 embedded code to avoid hard coding a
device model/initrd location. Other users of this function could make use of
this parameter to avoid hard coding these locations in the future too.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5763 c046a42c-6fe2-441c-8c8c-71466251a162
