Otherwise, a serial port can get stuck if it is migrated while flow control
is in effect.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.
Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_xmit starts transmission of whatever is in the transmitter
register, THR or FIFO; serial_watch_cb is a wrapper around it and is
only used as a qemu_chr_fe_add_watch callback.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move common code outside the if, and reset tsr_retry even in loopback mode.
Right now it cannot become non-zero, but it will be possible as soon as
we start respecting the baud rate.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can never become negative; reflect this in the type of the field
and simplify the conditions.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If qemu_chr_fe_write() returns an error (represented by a negative
number) we should skip incrementing the count and initiating a
memmove().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 667e5dc534d33338fcfc2471e5aa32fe7cbd13dc.1466546703.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the hw/char/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old milkymist.org domain just forwards to mm-labs.hk nowadays. I've
created a mirror of the documents.
Signed-off-by: Michael Walle <michael@walle.cc>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit e7c9136977
(hw/char: QOM'ify escc.c) cause qemu-system-ppc/ppc64
OpenBIOS to freeze on startup, this commit fix it.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1464767898-30526-1-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
xilinx_uartlite device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
cadence_uart_device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drop the qemu_char_get_next_serial and use chardev prop instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add lm32_uart_create function to create lm32 uart device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add etraxfs_ser_create function to create etraxfs serial device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes. However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.
This will corrupt QEMU memory, in most situations this causes the vm to
crash.
Fix by checking the offset against the array size.
Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At present only the core UART functions (data path for tx/rx) are
implemented, which is enough for UEFI to boot. The following
features/registers are unimplemented:
* Line/modem control
* Scratch register
* Extra control
* Baudrate
* SPI interfaces
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An upcoming patch will alter how simple unions, like InputEvent, are
laid out, which will impact all lines of the form 'evt->u.XXX'
(expanding it to the longer 'evt->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
an InputEvent.
There was one instance in hid.c:hid_pointer_event() where the code
was referring to evt->u.rel inside the case label where evt->u.abs
is the correct name; thankfully, both members of the union have the
same type, so it happened to work, but it is now cleaner.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move allocation to virtio functions also when loading/saving a
VirtQueueElement. This will also let the load/save functions
keep backwards compatibility when the VirtQueueElement layout
is changed.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The return code of virtqueue_pop/vring_pop is unused except to check for
errors or 0. We can thus easily move allocation inside the functions
and just return a pointer to the VirtQueueElement.
The advantage is that we will be able to allocate only the space that
is needed for the actual size of the s/g list instead of the full
VIRTQUEUE_MAX_SIZE items. Currently VirtQueueElement takes about 48K
of memory, and this kind of allocation puts a lot of stress on malloc.
By cutting the size by two or three orders of magnitude, malloc can
use much more efficient algorithms.
The patch is pretty large, but changes to each device are testable
more or less independently. Splitting it would mostly add churn.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-14-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-7-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.
The new xenforeignmemory_map() function behaves like
xc_map_foreign_pages() when the err argument is NULL and like
xc_map_foreign_bulk() when err is non-NULL, which maps into the shim
here onto checking err == NULL and calling the appropriate old
function.
Note that xenforeignmemory_map() takes the number of pages before the
arrays themselves, in order to support potentially future use of
variable-length-arrays in the prototype (in the future, when Xen's
baseline toolchain requirements are new enough to ensure VLAs are
supported).
In preparation for adding support for libxenforeignmemory add support
to the <=4.0 and <=4.6 compat code in xen_common.h to allow us to
switch to using the new API. These shims will disappear for versions
of Xen which include libxenforeignmemory.
Since libxenforeignmemory will have its own handle type but for <= 4.6
the functionality is provided by using a libxenctrl handle we
introduce a new global xen_fmem alongside the existing xen_xc. In fact
we make xen_fmem a pointer to the existing xen_xc, which then works
correctly with both <=4.0 (xc handle is an int) and <=4.6 (xc handle
is a pointer). In the latter case xen_fmem is actually a double
indirect pointer, but it all falls out in the wash.
Unlike libxenctrl libxenforeignmemory has an explicit unmap function,
rather than just specifying that munmap should be used, so the unmap
paths are updated to use xenforeignmemory_unmap, which is a shim for
munmap on these versions of xen. The mappings in xen-hvm.c do not
appear to be unmapped (which makes sense for a qemu-dm process)
In fb_disconnect this results in a change from simply mmap over the
existing mapping (with an implicit munmap) to expliclty unmapping with
xenforeignmemory_unmap and then mapping the required anonymous memory
in the same hole. I don't think this is a problem since any other
thread which was racily touching this region would already be running
the risk of hitting the mapping halfway through the call. If this is
thought to be a problem then we could consider adding an extra API to
the libxenforeignmemory interface to replace a foreign mapping with
anonymous shared memory, but I'd prefer not to.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.
In preparation for this switch all uses of xc_map_foreign_range to
xc_map_foreign_pages. This is trivial because size was always
XC_PAGE_SIZE so the necessary adjustments are trivial:
* Pass &mfn (an array of length 1) instead of mfn. The function
takes a pointer to const, so there is no possibily of mfn changing
due to this change.
* Pass nr_pages=1 instead of size=XC_PAGE_SIZE
There is one wrinkle in xen_console.c:con_initialise() where
con->ring_ref is an int but can in some code paths (when !xendev->dev)
be treated as an mfn. I think this is an existing latent truncation
hazard on platforms where xen_pfn_t is 64-bit and int is 32-bit (e.g.
amd64, both arm* variants). I'm unsure under what circumstances
xendev->dev can be NULL or if anything elsewhere ensures the value
fits into an int. For now I just use a temporary xen_pfn_t to in
effect upcast the pointer from int* to xen_pfn_t*.
In xenfb.c:common_bind we now explicitly launder the mfn into a
xen_pfn_t, so it has the correct type to be passed to
xc_map_foreign_pages and doesn't provoke warnings on 32-bit x86.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxengnttab which provides access to grant
tables.
In preparation for this switch the compatibility layer in xen_common.h
(which support building with older versions of Xen) to use what will
be the new library API. This means that the gnttab shim will disappear
for versions of Xen which include libxengnttab.
To simplify things for the <= 4.0.0 support we wrap the int fd in a
malloc(sizeof int) such that the handle is always a pointer. This
leads to less typedef headaches and the need for
XC_HANDLER_INITIAL_VALUE etc for these interfaces.
Note that this patch does not add any support for actually using
libxengnttab, it just adjusts the existing shims.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
All of the work in con_disconnect applies to the primary console case
(when xendev->dev is NULL). Therefore remove the early check and bail
and allow it to fall through. All of the existing code is correctly
conditional already.
The ->dev and ->gnttabdev handles are either both set or neither. For
consistency with con_initialise() with to the former here too.
With this con_initialise and con_disconnect now mirror each other.
Fix up a hard tab in the function while editing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
