MIPS r6 encodes jr as jalr zero, and jr.hb as jalr.hb zero, so add these
encodings to the MIPS disassembly table.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1443788657-14537-3-git-send-email-james.hogan@imgtec.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Type fprintf_function which fits here was defined with this attribute.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437208027-14584-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the Release 6 of the MIPS Architecture, LL, SC, LLD, SCD, PREF
and CACHE instructions have 9 bits offsets.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Compilation of TCI was accidentally broken by the recent disassembler
changes:
CC x86_64-softmmu/arch_init.o
In file included from target-i386/cpu-qom.h:23:0,
from target-i386/cpu.h:986,
from include/qemu-common.h:122,
from include/disas/bfd.h:12,
from disas/tci.c:20:
include/qom/cpu.h:178:43: error: unknown type name ‘disassemble_info’
void (*disas_set_info)(CPUState *cpu, disassemble_info *info);
^
include/qom/cpu.h:179:1: error:
no semicolon at end of struct or union [-Werror]
} CPUClass;
^
cc1: all warnings being treated as errors
The underlying cause of this is an include loop:
bfd.h -> qemu-common.h -> target-arm/cpu.h -> target-arm/cpu-qom.h
-> qom/cpu.h -> bfd.h
which means that if bfd.h is included first then qom/cpu.h doesn't
get the definition of the disassemble_info type that it wanted.
The easiest fix for this is to include qemu-common.h from tci.c
before including disas/bfd.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cris has the complication of variable length instructions and has
a check in place to clamp memory reads in case the disas request
doesn't have enough bytes for the instruction being disas'd. This
breaks down in the case where disassembling for the monitor where
the buffer length is defaulted to 0.
The buffer length should never be zero for a regular target_disas,
so we can safely assume the 0 case is for the monitor in which case
consider the buffer length to be the max for cris instructions.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In a normal disassembly flow, the printf() and stream being used varies
from disas job to job. In particular it varies if mixing monitor_disas
and target_disas.
Make both the printf() function and target stream settable in the
QEMUDisassmbler class.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access
upper word of extended to 64-bits CP0 registers.
In MIPS64, when CP0 destination register specified is the EntryLo0 or
EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or
EntryLo1. This is to compensate for RI and XI, which were shifted to bits
63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate
functions for EntryLo0 and EntryLo1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit
that is set by execution of an LL instruction, and thus when placed between
an LL and SC sequence, will never cause the SC to fail.
Presence of ERETNC is denoted by the Config5.LLB.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Warnings from the Sparse static analysis tool:
disas/microblaze.c:289:3: warning:
symbol 'opcodes' was not declared. Should it be static?
disas/microblaze.c:570:6: warning:
symbol 'register_prefix' was not declared. Should it be static?
disas/microblaze.c:571:6: warning:
symbol 'special_register_prefix' was not declared. Should it be static?
disas/microblaze.c:572:6: warning:
symbol 'fsl_register_prefix' was not declared. Should it be static?
disas/microblaze.c:573:6: warning:
symbol 'pvr_register_prefix' was not declared. Should it be static?
Remove the unused variable special_register_prefix.
The variable pvr_register_prefix was unused, too, but can be used.
Add also 'const' where possible.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
disas/arm.c:1552:15: warning:
symbol 'last_type' was not declared. Should it be static?
disas/arm.c:1553:5: warning:
symbol 'last_mapping_sym' was not declared. Should it be static?
disas/arm.c:1554:9: warning:
symbol 'last_mapping_addr' was not declared. Should it be static?
Instead of adding 'static', the unused variables and the unused code which
refers to those variables (which was deactivated a long time ago in
commit 4b0f1a8b) are removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warning from the Sparse static analysis tool:
disas/sh4.c:335:22: warning:
symbol 'sh_table' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
disassembling relative branches in code which doesn't reside at
what the guest CPU would think its execution address is. Use
the new MapCodeAddress() API to tell libvixl where the code is
from the guest CPU's point of view so it can get the target
addresses right.
Previous disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x7f6cb7020434)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x7f6cb702042c)
0x0000000040000014: d61f0080 br x4
Fixed disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x40000020)
0x0000000040000014: d61f0080 br x4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-3-git-send-email-peter.maydell@linaro.org
Update our copy of libvixl to upstream's 1.7 release.
This includes upstream's fix for the issue we had a local
patch for in commit 94cc44a9e.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-2-git-send-email-peter.maydell@linaro.org
The variables s390_opformats and s390_num_opformats are unused and
provoke clang warnings:
disas/s390.c:849:33: warning: variable 's390_opformats' is not needed and will not be emitted [-Wunneeded-internal-declaration]
static const struct s390_opcode s390_opformats[] =
^
disas/s390.c:875:18: warning: unused variable 's390_num_opformats' [-Wunused-const-variable]
static const int s390_num_opformats =
^
Delete them, since QEMU doesn't use them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove sparc_opcode_archs and the macros which use it, because we don't
use them in QEMU and they provoke clang warnings:
disas/sparc.c:307:39: warning: unused variable 'sparc_opcode_archs' [-Wunused-const-variable]
static const struct sparc_opcode_arch sparc_opcode_archs[] =
^
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This array is used by print_mips16_insn_arg() which is guarded by #if 0.
Therefore doing the same with the array as it generates clang warnings.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For Standard TLB configuration (Config.MT=1):
TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.
TLBINVF causes all entries to be invalidated.
Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
The instructions-a64.h header defines a number of floating point
constants whose initializers are function calls. gcc 5 will warn
if these constants are not used by the C or C++ file which includes
the header, because they imply a runtime cost. Since for the files
QEMU uses from libvixl we don't use these constants at all, just
remove them.
Upstream intend to fix these by shifting to an 'extern const' in
the header plus definition in a suitable source file, so we can
drop this patch when we sync with the upcoming libvixl 1.7.
The related compiling error:
CXX disas/arm-a64.o
In file included from /upstream/qemu/disas/libvixl/a64/disasm-a64.h:32:0,
from disas/arm-a64.cc:20:
disas/libvixl/a64/instructions-a64.h:98:13: error: 'vixl::kFP32PositiveInfinity' defined but not used [-Werror=unused-variable]
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
^
disas/libvixl/a64/instructions-a64.h:99:13: error: 'vixl::kFP32NegativeInfinity' defined but not used [-Werror=unused-variable]
const float kFP32NegativeInfinity = rawbits_to_float(0xff800000);
^
disas/libvixl/a64/instructions-a64.h💯14: error: 'vixl::kFP64PositiveInfinity' defined but not used [-Werror=unused-variable]
const double kFP64PositiveInfinity =
^
disas/libvixl/a64/instructions-a64.h:102:14: error: 'vixl::kFP64NegativeInfinity' defined but not used [-Werror=unused-variable]
const double kFP64NegativeInfinity =
^
disas/libvixl/a64/instructions-a64.h:107:21: error: 'vixl::kFP64SignallingNaN' defined but not used [-Werror=unused-variable]
static const double kFP64SignallingNaN =
^
disas/libvixl/a64/instructions-a64.h:109:20: error: 'vixl::kFP32SignallingNaN' defined but not used [-Werror=unused-variable]
static const float kFP32SignallingNaN = rawbits_to_float(0x7f800001);
^
disas/libvixl/a64/instructions-a64.h:112:21: error: 'vixl::kFP64QuietNaN' defined but not used [-Werror=unused-variable]
static const double kFP64QuietNaN =
^
disas/libvixl/a64/instructions-a64.h:114:20: error: 'vixl::kFP32QuietNaN' defined but not used [-Werror=unused-variable]
static const float kFP32QuietNaN = rawbits_to_float(0x7fc00001);
^
disas/libvixl/a64/instructions-a64.h:117:21: error: 'vixl::kFP64DefaultNaN' defined but not used [-Werror=unused-variable]
static const double kFP64DefaultNaN =
^
disas/libvixl/a64/instructions-a64.h:119:20: error: 'vixl::kFP32DefaultNaN' defined but not used [-Werror=unused-variable]
static const float kFP32DefaultNaN = rawbits_to_float(0x7fc00000);
^
cc1plus: all warnings being treated as errors
make: *** [disas/arm-a64.o] Error 1
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
[PMM: Rewrote the commit message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update our copy of libvixl to upstream 1.6. There are no
changes of any particular interest to QEMU, so this is simply
keeping up with current upstream.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412091418-25744-1-git-send-email-peter.maydell@linaro.org
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced
MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions.
In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant
i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been
updated yet.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot -
they have forbidden slot instead. However, current implementation does not
support forbidden slot yet.
Add also BC1EQZ and BC1NEZ instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping
with MIPS32R6 SDBBP.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Use "R6_" prefix in front of all new Multiply / Divide instructions for
easier differentiation between R6 and preR6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6.
Additionally, the hint codes in PREF instruction greater than or
equal to 24 generate Reserved Instruction Exception.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of LL and SC instruction has changed in MIPS32 Release 6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
The pre-v9 ADDX/SUBX insns were renamed ADDC/SUBC for v9.
Standardizing on the v9 name makes things less confusing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
On T4 and newer Sparc chips we have an add-with-carry insn
that takes its input from %xcc instead of %icc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Update our copy of libvixl to upstream's 1.5 release.
This includes the upstream versions of the fixes we
were carrying locally (commit ffebe899).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1407162987-4659-1-git-send-email-peter.maydell@linaro.org
Currently the Makefile of disas/libvixl appends
-I$(SRC_PATH)/disas/libvixl to QEMU_CFLAGS. As a consequence C++ files
that #include "utils.h", such as disas/libvixl/a64/instructions-a64.cc,
are going to look for utils.h on all the other include paths first.
When building QEMU as part of the Xen make system, another unrelated
utils.h file is going to be chosen for inclusion, causing a build
failure:
In file included from disas/libvixl/a64/instructions-a64.cc:27:0:
/qemu/disas/libvixl/a64/instructions-a64.h:88:64: error:
'rawbits_to_float' was not declared in this scope
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
Fix the problem by prepending (rather than appending) the libvixl
include path to QEMU_CFLAGS.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the compiler is told to check the arguments of AppendToOutput,
it reports several errors of this kind:
error: format ‘%d’ expects argument of type ‘int’,
but argument 3 has type ‘int64_t {aka long int}’ [-Werror=format]
Fix those bugs by using the correct format strings with PRId64, PRIx64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1403113751-19799-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update our copy of libvixl to upstream's 1.4 release.
Note that we no longer need any local fixes for compilation
on 32 bit hosts -- they have all been integrated upstream.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1399040419-9227-1-git-send-email-peter.maydell@linaro.org
Acked-by: Richard Henderson <rth@twiddle.net>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"%d" or "%x" won't work on hosts where int values are smaller than 64 bit.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1394219753-26106-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
