This cleanups the PHB3 model a bit more since the root port is an
independent device and it will ease our task when adding user created
PHB3s.
pnv_phb_attach_root_port() is made public in pnv.c so it can be reused
with the pnv_phb4 root port later.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A similar situation as described previously with pnv_phb3_root_port
devices also happens with pnv_phb4_root_ports.
The solution is the same: assign an unique chassis/slot combo for them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When creating a pnv_phb3_root_port using the command line, the first
root port is created successfully, but the second fails with the
following error:
qemu-system-ppc64: -device pnv-phb3-root-port,bus=phb3-root.0,id=pcie.3:
Can't add chassis slot, error -16
This error comes from the realize() function of its parent type,
rp_realize() from TYPE_PCIE_ROOT_PORT. pcie_chassis_add_slot() fails
with -EBUSY if there's an existing PCIESlot that has the same
chassis/slot value, regardless of being in a different bus.
One way to prevent this error is simply set chassis and slot values in
the command line. However, since phb3 root buses only supports a single
root port, we can just get an unique chassis/slot value by checking
which root bus the pnv_phb3_root_port is going to be attached, get the
equivalent phb3 device and use its chip-id and index values, which are
guaranteed to be unique.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We use the endianness of interrupts to determine which endianness to
use for the guest kernel memory dump. For machines that support HILE
(powernv8 and up) we have been always generating big endian dump
files.
This patch uses the HILE support recently added to
ppc_interrupts_little_endian to fix the endianness of the dumps for
powernv machines.
Here are two dumps created at different moments:
$ file skiboot.dump
skiboot.dump: ELF 64-bit MSB core file, 64-bit PowerPC ...
$ file kernel.dump
kernel.dump: ELF 64-bit LSB core file, 64-bit PowerPC ...
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Next patches will split powerpc_excp in multiple family specific
handlers. This patch adds a wrapper to make the transition clearer.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function is now suitable for
determining the endianness of interrupts for all CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.
Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the compile time definition and make the logging be controlled
by the `-d mmu` option in the cmdline.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add some documentation files to the corresponding machine sections
and mention the machine names in the section titles where it is
not so obvious (e.g. that "taihu" is a 405 machine).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220105104800.407570-1-thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Protected Execution Facility is only available with the pseries
machine, so let's merge the old ASCII text into the new RST file now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105103232.405204-1-thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.03 introduced Floating Round to Integer instructions : frin,
friz, frip, and frim. Add them to POWER5+.
The PPC_FLOAT_EXT flag also includes the fre (Floating Reciprocal
Estimate) instruction which was introduced in ISA v2.0x. The
architecture document says its optional and that might be the reason
why it has been kept under the PPC_FLOAT_EXT flag. This means 970 CPUs
can not use it under QEMU, which doesn't seem to be a problem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWER5+ (ISA v2.03) processors are supported by the pseries machine
but they do not have Altivec instructions. Do not advertise support
for it in the DT.
To be noted that this test is in contradiction with the assert in
cap_vsx_apply().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
popcntb instruction was added in ISA v2.02. Add support for POWER5+
processors since they implement ISA v2.03.
PPC970 CPUs implement v2.01 and do not support popcntb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- Add SDHC support for SD card SPI-mode (Frank Chang)
-----BEGIN PGP SIGNATURE-----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=PEEr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging
SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20220108:
hw/sd: Add SDHC support for SD card SPI-mode
hw/sd/sdcard: Rename Write Protect Group variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b2fcb0c575
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20220107153019.504124-1-sw@weilnetz.de
Signed-off-by: John Snow <jsnow@redhat.com>
Mypy 0.930, released Dec 22, changes the way argparse objects are
considered. Crafting a definition that works under Python 3.6 and an
older mypy alongside newer versions simultaneously is ... difficult,
so... eh. Stub it out with an 'Any' definition to get the CI moving
again.
Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
0.920 (Released 2021-12-15) is not entirely happy with the
way that I was defining _FutureT:
qemu/aqmp/protocol.py:601: error: Item "object" of the upper bound
"Optional[Future[Any]]" of type variable "_FutureT" has no attribute
"done"
Update it with something a little mechanically simpler that works better
across a wider array of mypy versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220110191349.1841027-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
pylint's dependency astroid appears to have bugs in 2.9.1 and 2.9.2 (Dec
31 and Jan 3) that appear to erroneously expect the qemu namespace to
have an __init__.py file. astroid 2.9.3 (Jan 9) avoids that problem, but
appears to not understand a relative import within a namespace package.
Update the relative import - it was worth changing anyway, because these
packages will eventually be packaged and distributed separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This reverts commit 316011b8a7.
Fixes: 316011b8a7 ("virtio-pci: decouple the single vector from the interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 8806237234.
Fixes: 8806237234 ("vhost: introduce new VhostOps vhost_set_config_call")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 634f7c89fb.
Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 081f864f56.
Fixes: 081f864f56 ("virtio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f7220a7ce2.
Fixes: f7220a7ce2 ("vhost: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 497679d510.
Fixes: 497679d510 ("virtio-net: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit d48185f1a4.
Fixes: d48185f1a4 ("virtio-mmio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit d5d24d859c.
Fixes: d5d24d859c ("virtio-pci: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature") added
a new feature for processors from the 68020 onwards which do not require data
accesses to be word aligned.
Unfortunately the original commit missed an additional case whereby the SP is
still word aligned when setting up an additional format 1 stack frame so add the
necessary M68K_FEATURE_UNALIGNED_DATA feature guard.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108180453.18680-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The macfb VRAM memory region was configured with coalescing rather than dirty
memory logging enabled, causing some areas of the screen not to redraw after
a full screen update.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108164147.30813-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"qemu-system-m68k -M q800 -bios /dev/null" crashes with a segfault
in q800_init().
This happens because the code doesn't check that rom_ptr() returned
a non-NULL pointer .
To avoid NULL pointer, don't allow 0 sized file and use bios_size with
rom_ptr().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/756
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220107105049.961489-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This series of patches brings in 32-bit arm support for bsd-user. It implements
all the bits needed to do image activation, signal handling, stack management
and threading. This allows us to get to the "Hello World" level. The arm and x86
code are now the same as in the bsd-user fork. For full context, the fork is at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz (though the the recent
sig{bus,segv} needed updates are incomplete).
v5 changes:
o Moved to using the CPUArchState typedef and move
set_sigtramp_args, get_mcontext, set_mcontext, and
get_ucontext_sigreturn prototypes to
bsd-user/freebsd/target_os_ucontext.h
o Fix issues with arm's set_mcontext related to masking
and remove an unnecessary check.
We're down to only one hunk needing review:
bsd-user/arm/target_arch_signal.c: arm set_mcontext
Warnings that should be ignored:
o make checkpatch has a couple of complaints about the comments for the
signal trampoline, since it's a false positive IMHO.
WARNING: Block comments use a leading /* on a separate line
+ /* 8 */ sys_sigreturn,
WARNING: Block comments use a leading /* on a separate line
+ /* 9 */ sys_exit
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org
iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmHZPwUACgkQbBzRKH2w
EQDXyQ//cT3b2zUQobby/vJX017mFni8ozZgwWSFlAvVFGjWt8UMdAt4rUFzr7a3
G+IEaw39nqtNyEIaYSvKWFHdMSRP6v7vHnDT3Lz5SHEyShpdzjxKZNZ7NUOH21d2
T6gCXSOB9AsMPFmi9Pb9ICF61Kf4EhHwYYvw/4/7YKHPeWltfWZQo4sJPOTTVqg5
drwHu3JQEV53y/gmbVlnklfnNRnbFC0k0UCtfgD2n/IZj6yL1P3Di9zOVeaEQAyK
L7xF90yrUsFUWtGKpMc5D4idQAWSlwgoD/rYLZ/xPRQtJGNUbQhJ07C788M5/plB
z3TeWn+M6oBQMWIHwRMhF6vlhO7TNrmjQYW3mubLOigNuP7/2WOpSc2CDLhh72ty
CF13ifdPFaJzzzkagNHkn1s5BHYeR8TeKGdcYFvgdCgbSu8L0c1bY1ZDaDryOnPr
JvM7cFNnbukMjmBMNLGnc8HnDIdlRZufxHzEQBGUOEE4ujPooGhWBnhfYbNMCWxT
wlvmv47FMRSdAl9Qteqz2ZsbQdHDp9PVbvWO1yx9htoeXaM8Nr7il1MQ4FrUkxbz
P12yUWbCHPAS2+3fADiub/EZLOfYucYcAKPIQ2I7UokFzjR43l2+Nu01HSwcBG9C
Y4+H0yiwk22UWfKB8cLhFM7wUwh6oeK2cm1eO13IUFwlQGWP9Ik=
=zscp
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-arm-pull-request' of gitlab.com:bsdimp/qemu into staging
bsd-user: arm (32-bit) support
This series of patches brings in 32-bit arm support for bsd-user. It implements
all the bits needed to do image activation, signal handling, stack management
and threading. This allows us to get to the "Hello World" level. The arm and x86
code are now the same as in the bsd-user fork. For full context, the fork is at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz (though the the recent
sig{bus,segv} needed updates are incomplete).
v5 changes:
o Moved to using the CPUArchState typedef and move
set_sigtramp_args, get_mcontext, set_mcontext, and
get_ucontext_sigreturn prototypes to
bsd-user/freebsd/target_os_ucontext.h
o Fix issues with arm's set_mcontext related to masking
and remove an unnecessary check.
We're down to only one hunk needing review:
bsd-user/arm/target_arch_signal.c: arm set_mcontext
Warnings that should be ignored:
o make checkpatch has a couple of complaints about the comments for the
signal trampoline, since it's a false positive IMHO.
WARNING: Block comments use a leading /* on a separate line
+ /* 8 */ sys_sigreturn,
WARNING: Block comments use a leading /* on a separate line
+ /* 9 */ sys_exit
# gpg: Signature made Fri 07 Jan 2022 11:36:37 PM PST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-arm-pull-request' of gitlab.com:bsdimp/qemu: (37 commits)
bsd-user: add arm target build
bsd-user/freebsd/target_os_ucontext.h: Require TARGET_*CONTEXT_SIZE
bsd-user/arm/signal.c: arm get_ucontext_sigreturn
bsd-user/arm/signal.c: arm set_mcontext
bsd-user/arm/signal.c: arm get_mcontext
bsd-user/arm/signal.c: arm set_sigtramp_args
bsd-user/arm/target_arch_signal.h: Define size of *context_t
bsd-user/arm/target_arch_signal.h: arm machine context and trapframe for signals
bsd-user/arm/target_arch_signal.h: arm specific signal registers and stack
bsd-user/arm/target_arch_elf.h: arm get_hwcap2 impl
bsd-user/arm/target_arch_elf.h: arm get hwcap
bsd-user/arm/target_arch_elf.h: arm defines for ELF
bsd-user/arm/target_arch_thread.h: Routines to create and switch to a thread
bsd-user/arm/target_arch_sigtramp.h: Signal Trampoline for arm
bsd-user/arm/target_arch_vmparam.h: Parameters for arm address space
bsd-user/arm/target_arch_reg.h: Implement core dump register copying
bsd-user/arm/target_arch_cpu.h: Implement system call dispatch
bsd-user/arm/target_arch_cpu.h: Implement data abort exceptions
bsd-user/arm/target_arch_cpu.h: Implement trivial EXCP exceptions
bsd-user/arm/target_arch_cpu.h: Dummy target_cpu_loop implementation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fix illegal instruction when PMP is disabled
- SiFive PDMA 64-bit support
- SiFive PLIC cleanups
- Mark Hypervisor extension as non experimental
- Enable Hypervisor extension by default
- Support 32 cores on the virt machine
- Corrections for the Vector extension
- Experimental support for 128-bit CPUs
- stval and mtval support for illegal instructions
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmHZJhMACgkQIeENKd+X
cFSzfgf9FTU3spDGSFMQXFdHfFionDbbyRhXqHG785/9193DKAZysSCv1PWrScX1
i9GwbR963Z03ksGN0yGFleqZAE2wz6jQxzXPbikeL4kNH1CiBTP1HFUM194d4cLA
4bjZ3l29obkzjD53mlQpi/0siqe3deKbuRu+z55LlS21C3SUkxggb5Fda+V0dzix
h+Ytd7Qkif16aVDD20Q6O/4g8tZgqYvuDOdY78/V7VSzFd5bV1j8uONsDmp3NTWo
l2vgMDxtv1f7uggtApNvTeWRHeLkDB3OMMHZHiXYceyIcqYvZecmMfRloVC7qY7t
TOR378HVElPHJs9iJMzx7xlcJ5xHeQ==
=ffGh
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20220108' of github.com:alistair23/qemu into staging
Second RISC-V PR for QEMU 7.0
- Fix illegal instruction when PMP is disabled
- SiFive PDMA 64-bit support
- SiFive PLIC cleanups
- Mark Hypervisor extension as non experimental
- Enable Hypervisor extension by default
- Support 32 cores on the virt machine
- Corrections for the Vector extension
- Experimental support for 128-bit CPUs
- stval and mtval support for illegal instructions
# gpg: Signature made Fri 07 Jan 2022 09:50:11 PM PST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220108' of github.com:alistair23/qemu: (37 commits)
target/riscv: Implement the stval/mtval illegal instruction
target/riscv: Fixup setting GVA
target/riscv: Set the opcode in DisasContext
target/riscv: actual functions to realize crs 128-bit insns
target/riscv: modification of the trans_csrxx for 128-bit support
target/riscv: helper functions to wrap calls to 128-bit csr insns
target/riscv: adding high part of some csrs
target/riscv: support for 128-bit M extension
target/riscv: support for 128-bit arithmetic instructions
target/riscv: support for 128-bit shift instructions
target/riscv: support for 128-bit U-type instructions
target/riscv: support for 128-bit bitwise instructions
target/riscv: accessors to registers upper part and 128-bit load/store
target/riscv: moving some insns close to similar insns
target/riscv: setup everything for rv64 to support rv128 execution
target/riscv: array for the 64 upper bits of 128-bit registers
target/riscv: separation of bitwise logic and arithmetic helpers
target/riscv: additional macros to check instruction support
qemu/int128: addition of div/rem 128-bit operations
exec/memop: Adding signed quad and octo defines
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all architecutres define TARGET_[MU]CONTEXT_SIZE, enforce
requiring them and always check the sizeof target_{u,m}context_t
sizes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update ucontext to implement sigreturn.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the machine context to the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Get the machine context from the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement set_sigtramp_args to setup the arguments to the sigtramp
calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define the native sizes of mcontext_t and ucontext_t so that the tests
in target_os_ucontext.h ensure the size of arm's version of these
structures is correct.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
