This adds support for the ARMv8 floating point VMAXNM and VMINNM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-6-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the VSEL floating point selection instruction
which was added in ARMv8.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Floating point is an extension to the instruction set rather than
a coprocessor, so call it directly from the ARM and Thumb decode
functions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-2-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode,
registers look vastly different, instruction encoding is completely different,
basically the system turns into a different machine.
So let's do a simple if() in translate.c to decide whether we can handle the
current code in the legacy AArch32 code or in the new AArch64 code.
So far, the translation always complains about unallocated instructions. There
is no emulator functionality in this patch!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org
[PMM:
* provide no-op versions of a64 functions ifndef TARGET_AARCH64;
this lets us avoid #ifdefs in translate.c
* insert the missing call to disas_a64_insn()
* stash the insn in the DisasContext rather than reloading it in
real_unallocated_encoding()
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds all the prerequisites for AArch64 support that didn't
fit into split up patches. It extends important bits in the core cpu
headers to also take AArch64 mode into account.
Add new ARM_TBFLAG_AARCH64_STATE translation buffer flag
indicate an ARMv8 cpu running in aarch64 mode vs aarch32 mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-10-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-4-git-send-email-john.rigby@linaro.org
[PMM:
* rearranged tbflags so AArch64? is bit 31 and if it is set then
30..0 are freely available for whatever makes most sense for that mode
* added version bump since we change VFP migration state
* added a comment about how VFP/Neon register state works
* physical address space is 48 bits, not 64
* added ARM_FEATURE_AARCH64 flag to identify 64-bit capable CPUs
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want gen_set_pc_im() to work for both AArch64 and AArch32, but
to do this we'll need the DisasContext* so we can tell which mode
we're in, so pass it in as a parameter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-7-git-send-email-peter.maydell@linaro.org
Correct a few places that were using uint32_t or a 32 bit
only format string to handle something that should be a target_ulong.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-6-git-send-email-peter.maydell@linaro.org
[PMM: split out to separate patch; added gen_goto_tb() and
gen_set_pc_im() dest params to list of things to change.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cpu_env tcg variable will be used by both the AArch32 and AArch64
handling code. Unstaticify it, so that both sides can make use of it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-5-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-3-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to share the disassembly status struct between AArch32 and
AArch64 modes. So put it into a header file that both sides can use.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-4-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-2-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AArch32 code (ie traditional 32 bit world) expects to be
able to pass a vaddr in a TCGv_i32. However when QEMU is
compiled with TARGET_LONG_BITS=32 the TCG load/store
functions take a TCGv_i64. Abstract out load/store with
a 32 bit vaddr so we have a place to put the zero extension
of the vaddr and the extension/truncation of the data value.
Apart from the function definitions most of this patch is
a simple s/tcg_gen_qemu_/gen_aa32_/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-3-git-send-email-peter.maydell@linaro.org
In the decode of ARM B and BL insns, swap the order of the
"append 2 implicit zeros to imm24" and the sign extend, and
use the new sextract32() utility function to do the latter.
This avoids a direct dependency on the undefined C behaviour
of shifting into the sign bit of an integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1378391908-22137-2-git-send-email-peter.maydell@linaro.org
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
These unimplemented opcodes are handled like illegal opcodes, but
they are used in existing code. We should at least report when they
are executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
The ARMv8 SEVL instruction is in the architectural hint space already
emulated as nop. This makes the decoding of SEVL explicit for clarity.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Message-id: 1370606786-5650-3-git-send-email-mans@mansr.com
[PMM: added 'SEVL' to the TODO comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 load acquire/store release instructions.
Since qemu does nothing special for memory barriers, these can be
emulated like their non-acquire/release counterparts.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The rfe instruction has been broken since patch
5a839c0d54 because of a typo.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these warnings from cppcheck:
hw/display/cirrus_vga.c:2603:
hw/sd/sd.c:348:
hw/timer/exynos4210_mct.c:1033:
target-arm/translate.c:9886:
target-s390x/mem_helper.c:518:
target-unicore32/translate.c:1936:
style: Consecutive return, break, continue, goto or throw statements are unnecessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All the uses of the gen_{ld,st}* functions are gone now, so remove
the functions themselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
gen_ld64() and gen_st64() are used only in one place, so just
expand them out.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
TCGv changes size depending on the compile time value of
TARGET_LONG_BITS. This is useful for generating code for MIPS style
"instructions are the same but the register width changes" CPUs, and
also for the generic bits of QEMU which operate on "width of a
virtual address" values, but mostly in the ARM target code we were
using it purely as a shorthand for "any 32 bit value".
This needs to change in preparation for AArch64 support, since an
AArch64-capable v8 core will have 64 bit virtual addresses but still
use 32 bit values for the 32 bit instruction set.
This patch mechanically converts all the occurrences of TCGv,
tcg_temp_new(), tcg_temp_free(), tcg_temp_local_new() and
TCGV_UNUSED() to their explicitly 32 bit counterparts. This is
correct for everything except the arguments to tcg_gen_qemu_{ld,st}*,
which really do need to be TCGv and so will require a 32-to-64
conversion when building the 32 bit code for AArch64. Those changes
will be in a separate patch for easier review.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since patch
81465888c5
target-arm: factor out handling of SRS instruction
the ARM mode SRS instruction has not worked in QEMU.
The problem is a missing return directive that was removed in the
refactoring, so after decoding the instruction, qemu would fall through
to generate an UNDEF exception for an illegal instruction.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
M profile cores do not have the RFE or SRS instructions, so
correctly UNDEF these insn patterns on those cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Factor out the handling of the SRS instruction rather than
duplicating it between the Thumb and ARM decoders. This in
passing fixes two bugs in the Thumb decoder's SRS handling
which didn't exist in the ARM decoder:
* (LP:1079080) storing CPSR rather than SPSR (fixed in the
ARM decoder in commit c67b6b71 in 2009)
* failing to free the 'addr' TCG temp in the writeback case
Reported-by: Cesson Vincent <vcesson@stmi.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While T0+~T1+CF = T0-T1+CF-1 is true for the low 32-bits,
it does not produce the correct carry-out to bit 33. Do
exactly what the manual says.
Using the ~T1 makes the add and subtract code paths nearly
identical, so have sbc_CC use adc_CC.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commits 49b4c31efc and
2de68a4900 reworked the implementation of adc_CC
and sub_CC. The new implementations (on the TCG_TARGET_HAS_add2_i32 code path)
are incorrect. The new logic is:
CF:NF = 0:A +/- 0:CF
CF:NF = CF:A +/- 0:B
The lower 32 bits of the intermediate result stored in NF needs to be passes
into the second addition in place of A (s/CF:A/CF:NF):
CF:NF = 0:A +/- 0:CF
CF:NF = CF:NF +/- 0:B
This patch fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use sub2 if available, otherwise use 64-bit arithmetic.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use add2 if available, otherwise use 64-bit arithmetic.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a leak of a TCG temporary in code paths for VFP system register
writes for cases which UNDEF or are write-ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Implement abs_i32 inline (with movcond) rather than using a helper
function.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the TCG operation to do Neon 64 bit negations rather than calling
a helper routine for it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instructions that both use the RRX second operand and update CS were
incorrect, as the Carry flag was updated too early. An example of such an
instruction would be:
ands r12,r13,RRX
Ands, because of the "s" flag will update the carry flag. But the RRX second
operand rotates through the C flag which should happen before the update.
Fixed the ordering of the two, the old carry is read by "r13,RRX" before being
updated.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: Vinesh Peringat <vineshp@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the deposit op instead of and hardcoded bit field insertion. It
allows the host to emit the corresponding instruction if available.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the movcond TCG op is available, it's possible to replace
shl and shr helpers by TCG code. The code generated by TCG is slightly
longer than the code generated by GCC for the helper but is still worth
it as this avoid all the consequences of using an helper: globals saved
back to memory, no possible optimization, call overhead, etc.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the setcond TCG op is available, it's possible to replace
add_cc and sub_cc helpers by TCG code. The code generated by TCG is
actually very close to the one generated by GCC for the helper, and
this avoid all the consequences of using an helper: globals saved back
to memory, no possible optimization, call overhead, etc.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use globals for CC flags instead of loading/storing them each they are
accessed. This allows some optimizations to be performed by the TCG
optimization passes.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reinstate the display of VFP registers in cpu_dump_state(), if
the CPU has them (this code had been #if 0'd out a for a long time).
We drop the attempt ot display the values as floating point, since
this makes assumptions about the host 'float' and 'double' formats
and is not done by eg the i386 cpu_dump_state().
This display is gated on the CPU_DUMP_FPU flag, as for x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Convert remaining helpers to AREG0 free mode: add an explicit
CPUState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0.
For easier review, convert only op helpers which don't return any value.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fix a variety of typos in comments in target-arm files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix errors in the TCG temp handling in the 64 bit coprocessor
write path: we were reusing a 32 bit temp after it had been
freed by store_reg(), and failing to free a 64 bit temp.
This bug has no visible effect at this point because there
aren't any non-NOP 64 bit registers yet; it needs to be fixed
as a prerequisite for the 64 bit registers in LPAE support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The coprocessor register rework broke cp15 based WFI instructions.
We incorrectly fall through the normal register write case, which
incorrectly adds a forced block termination. We've already done
a special version of this (DISAS_WFI), so return immediately.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the v6 optional block cache ops to the new cp15 framework.
This includes only providing them on the CPUs which implemented
them, rather than the previous blunderbuss approach of making
all MCRR instructions on all CPUs act as NOPs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the various WFI and barrier instruction special cases to use
cp_reginfo infrastructure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All the users of cpu_arm_set_cp_io have been converted, so we
can remove it and the infrastructure it used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initial infrastructure for data-driven registration of
coprocessor register implementations.
We still fall back to the old-style switch statements pending
complete conversion of all existing registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the SETEND instruction respect the setting of bswap_code,
so that in BE8 mode we UNDEF for attempts to switch into
little-endian mode and nop for attempts to stay in big-endian
mode. (This is the inverse of the existing handling of SETEND
in the more common little-endian setup, which we use since
we don't implement the architecturally-mandated dynamic
endianness switching.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for ARM BE8 userspace binaries.
i.e. big-endian data and little-endian code.
In principle LE8 mode is also possible, but AFAIK has never actually
been implemented/used.
System emulation doesn't have any useable big-endian board models,
but should in principle work once you fix that.
Dynamic endianness switching requires messing with data accesses,
preferably with TCG cooperation, and is orthogonal to BE8 support.
Signed-off-by: Paul Brook <paul@codesourcery.com>
[PMM: various changes, mostly as per my suggestions in code review:
* rebase
* use EF_ defines rather than hardcoded constants
* make bswap_code a bool for future VMSTATE macro compatibility
* update comment in cpu.h about TB flags bit field usage
* factor out load-code-and-swap into arm_ld*_code functions and
get_user_code* macros
* fix stray trailing space at end of line
* added braces in disas.c to satisfy checkpatch
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch replaces the ARM_FEATURE_VFP3 test when reading MVFR registers
with a test for a new feature flag ARM_FEATURE_MVFR, and sets this feature
for all ARMv6K cores (ARM1156 is not a v6K core, yet supports MVFR; qemu
does not support ARM1156 at this time.)
MVFR0 and MVFR1 were introduced in ARM1136JF-S r1p0 (ARMv6K, VFPv2) and are
present in ARM1156T2F-S (non-v6K), ARM1176JZF-S, ARM11MPCore and newer cores.
Reference: ARM DDI 0211H, 0290G, 0301H, 0360E.
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0211h/Ffbefjag.html
Without this change, the linux kernel will not boot with VFP support enabled
under ARM1176 system emulation, due to the unconditional use of MVFR1 at the
end of vfp_init() in arch/arm/vfp/vfpmodule.c:
VFP support v0.3: implemetor 41 architecture 1 part 20 variant b rev 5
Internal error: Oops - undefined instruction: 0 [#1]
Signed-off-by: Andrew Towers <atowers@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Decode the SETEND instruction correctly in Thumb mode,
rather than accidentally treating it like CPS. We don't
support BE8 mode, but this change brings the Thumb mode
in to line with behaviour in ARM mode: 'SETEND BE' is
not supported and will provoke an UNDEF exception, but
'SETEND LE' is correctly handled as a no-op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel Forsgren <daniel.forsgren@enea.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Scripted conversion:
sed -i "s/CPUState/CPUARMState/g" target-arm/*.[hc]
sed -i "s/#define CPUARMState/#define CPUState/" target-arm/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Fix errors in the decode of M profile CPS:
* the decode of the I (affects PRIMASK) and F (affects FAULTMASK)
bits was reversed
* the FAULTMASK system register number is 19, not 17
This fixes an issue reported as LP:913925.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify some slightly misleading comments in the Thumb decoder's
handling of the memory hint space -- in particular one code path
marked as 'UNPREDICTABLE or unallocated hint' also includes some
legitimate preload instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Implement the fused multiply-accumulate instructions (VFMA, VFMS,
VFNMA, VFNMS) which are new in VFPv4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for UDIV and SDIV in ARM mode. This is a new optional
feature for A profile cores (Thumb mode has had UDIV and SDIV for
M profile cores for some time).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the ARM_FEATURE_DIV feature bit to _THUMB_DIV, to
make room for a new feature switch enabling DIV in the ARM
encoding. (Cores may implement either (a) no divide insns
(b) divide insns in Thumb encodings only (c) divide insns
in both ARM and Thumb encodings.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up the decoding of the v6 media multiply space so that we UNDEF
on unassigned encodings rather than randomly interpreting them as
some instruction in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some stray printfs for cases which don't generally happen
(some VFP UNDEF cases, reads and writes to unknown cp14 registers);
we should simply generate an UNDEF when the instruction is executed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VCVTT/VCVTB with bit 8 set is UNPREDICTABLE; we choose to UNDEF.
This avoids a TCG assert later when the VCVTT/VCVTB code tries to
use a source register that wasn't ever set up.
We pull the check for the presence of the half-precision extension
up in to this common code as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the UNDEF and UNPREDICTABLE cases for VLDM and VSTM. In
particular, we now generate an undef exception for overlarge imm8
values rather than generating 1000+ TCG ops and hitting an assertion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv6 implemented various operations as special cases of cp15 accesses
which are true instructions in v7; this includes barriers (DMB, DSB, ISB).
Catch this special case at translate time, so that it works in linux-user
mode (which doesn't provide a functional get_cp15 helper) as well as
system mode.
Includes minor cleanup of the existing cases (single switch statement,
and doing the "OK in user mode?" test explicitly rather than hiding it in
cp15_user_ok()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
target-arm: Minimal implementation of performance counters
Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Revert "target-arm: Use global env in neon_helper.c helpers"
target-arm: Pass fp status pointer explicitly to neon fp helpers
target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
target-arm: Add helper function to generate code to get fpstatus pointer
Revert "target-arm: Use global env in iwmmxt_helper.c helpers"
Conflicts:
Makefile.target
Newer Linux kernels assume the existence of the performance counter
cp15 registers. Provide a minimal implementation of these registers.
We support no events. This should be compliant with the ARM ARM,
except that we don't implement the cycle counter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This effectively reverts commit 2a3f75b42a
so that we return to passing CPUState to helpers as an explicit parameter.
(There were a number of conflicts in target-arm/translate.c which had
to be resolved by hand so it is not a pure revert.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the Neon helpers for various floating point operations take an
explicit pointer to the float_status they use, so they don't rely on
the global environment pointer any more. This also allows us to drop
the mul/sub/add helpers completely and just use the vfp versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Will Newton
Richard Henderson
Alexander Graf
Peter Maydell
Anthony Liguori
Stefan Weil
Andreas Färber
Mans Rullgard
Anthony Liguori
Peter Chubb
Peter Crosthwaite
Paolo Bonzini
Evgeny Voevodin
Blue Swirl
Peter Crosthwaite
Aurelien Jarno
Paul Brook
Andrew Towers