GCC11 from crossbuild-essential-armhf from ubuntu 22.04 errors:
cc1: error: ‘-mfloat-abi=hard’: selected architecture lacks an FPU
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220604032713.174976-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-2-alex.bennee@linaro.org>
This series of patches continues the effort to get system calls working
upstream. This series was cleaved off a prior series to give me time to rework
based on the feedback from the first time I posted these. read, write and exit
are implemented, along with a few helper functions and tracing.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=nOc2
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-preen-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user into staging
bsd-user upstreaming: read, write and exit
This series of patches continues the effort to get system calls working
upstream. This series was cleaved off a prior series to give me time to rework
based on the feedback from the first time I posted these. read, write and exit
are implemented, along with a few helper functions and tracing.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmKknqsACgkQbBzRKH2w
# EQDJFhAA3ARnphfxKUvKHzi6ARza8YRFNJs/X48l78xugW8Fx2+UFxn/oPzVYuM3
# TUIIRNIXQxYDWP5rNN4zNfYjn1F32qx4PrLzzHw4t/0pNvNDvbVKyw+OB1pNUVI9
# 6hNH7jTLczi4OwZFPC4bJdFFHI55t4PCHxPaMQQO76lEsFzz3+9OcNNj3/j5aTBH
# kY3FsmOIKFEFuqDANjdn13lBlkNNWj5WMIsEQd+k1TPTfG3EWDlfHVJVezx9j5uH
# KMUjRRqBANLVJuqhog7sVAdkR6o/aKuq16nPVAgkLeJrsjwljoO1bGL3DTFWzhAo
# v3+S3a5gCReLXA/Z+dGCuJysmimsm+XdJWHyNIwDCV/UUg9tXc9/BI/eBSK7MLbz
# hvURY3cRSSVY+xiu5ts1OCp1bbqMaYbpIrv1mLZMA/32Y1KNv0LwSI0ClGag0MJ1
# rSVC3i/TGYn8Dk7TlfKkrKn751ZCCDsxZGROEcPlTV84Mc7080lpgYZKlgLCPJNT
# WWaVSBs9YhHhmoG3R3GurfsHnnRr8Y8iZkmndoCJdeSlmZh/1oD31PWKhnydsPa9
# jQCENkAM0dOM/r+hV+paFxOPkgklu7KLtjqGnVRxgB4j37jA9KDyw+UXLmjipP0K
# IwPlsNIfk1LujID3o5nJVgf/K+TJpXS7JDcUsuB9+FvlkeEMWm8=
# =nOc2
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 11 Jun 2022 06:54:51 AM PDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-preen-2022q2-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user:
bsd-user/freebsd/os-syscall.c: Implement exit
bsd-user/bsd-file.h: Meat of the write system calls
bsd-user/bsd-file.h: Add implementations for read, pread, readv and preadv
bsd-user/freebsd/os-syscall.c: Tracing and error boilerplate
bsd-user/freebsd/os-syscall.c: unlock_iovec
bsd-user/freebsd/os-syscall.c: lock_iovec
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes compilation due to false positives with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from qemu/src/include/glib-compat.h:32,
from qemu/src/include/qemu/osdep.h:144,
from ../src/hw/mips/boston.c:20:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘boston_mach_init’ at ../src/hw/mips/boston.c:790:52:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘dtb_load_data’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/mips/boston.c: In function ‘boston_mach_init’:
../src/hw/mips/boston.c:790:52: note: ‘dtb_load_data’ was declared here
790 | g_autofree const void *dtb_file_data, *dtb_load_data;
| ^~~~~~~~~~~~~
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘boston_mach_init’ at ../src/hw/mips/boston.c:790:36:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘dtb_file_data’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/mips/boston.c: In function ‘boston_mach_init’:
../src/hw/mips/boston.c:790:36: note: ‘dtb_file_data’ was declared here
790 | g_autofree const void *dtb_file_data, *dtb_load_data;
| ^~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220605151908.30566-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
etsec_create() wraps qdev API which is outdated. It is also unused,
so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The macro seems to be used only internally, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-4-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The tables contain spcifically crafted constants for algorithms, so make
them immutable.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_I8042 is exported, so reuse it for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Exposing the io_base offset as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
iobase = 112 (0x70)
irq = 8 (0x8)
lost_tick_policy = "discard"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 3b004a1654 'hw/rtc/
mc146818rtc: QOM'ify IRQ number' mc146818rtc's IRQ number is
configurable. Fix microvm-dt to respect its value.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
New code will be added where this is best practice. So update existing code
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix3_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-11-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
PCI interrupt wiring was performed in create() functions which are
obsolete. Move these tasks into QOM functions to modernize the code.
In order to avoid duplicate checking for xen_enabled() the realize
methods are now split.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-10-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix4_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Just like the real hardware, create the PIIX4 ACPI controller as part of
the PIIX4 southbridge. This also mirrors how the IDE and USB functions
are already created.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-7-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
PCI interrupt wiring and device creation were performed in create()
functions which are obsolete. Move these tasks into QOM functions to
modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining
ones, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is now unused and so can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-12-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Initialize the SMI IRQ in piix4_pm_init().
The smi_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce piix4_pm_init() instance init function and use it to
initialise the separate qdev gpio for the SCI IRQ.
The sci_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be
mapped outside of piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the smm_enabled value to be set using a standard qdev property instead
of being referenced directly in piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for conversion to a qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-3-mark.cave-ayland@ilande.co.uk>
[PMD: Change simm_enabled from int to bool, suggested by Ani Sinha]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This logic can be included as part of piix4_pm_realize() and does not need to
be handled externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo)
don't support DMA. The core floppy controller code expects this to
be indicated by setting FDCtrl::dma_chann to -1. This used to be
done in the device instance_init functions sysbus_fdc_initfn() and
sun4m_fdc_initfn(), but in commit 1430759ec3 we refactored this code
and accidentally lost the setting of dma_chann.
For sysbus-fdc this has no ill effects because we were redundantly
also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo
this means that guests which try to enable DMA on the floppy
controller will cause QEMU to crash because FDCtrl::dma is NULL.
Set dma_chann to -1 in the common instance init, and remove the
redundant code in fdctrl_init_sysbus() that is also setting it.
There is a six-year-old FIXME comment in the jazz board code to the
effect that in theory it should support doing DMA via a custom DMA
controller. If anybody ever chooses to fix that they can do it by
adding support for setting both FDCtrl::dma_chann and FDCtrl::dma.
(A QOM link property 'dma-controller' on the sysbus device which can
be set to an instance of IsaDmaClass is probably the way to go.)
Fixes: 1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220505101842.2757905-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA support in QEMU is actively used by MediaTek and is
planned to be maintained and potentially extended by MediaTek in
future.
Un-orphan nanoMIPS ISA support in QEMU by setting a maintainer from
MediaTek and remove deprecation notes from documentation as well.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Message-Id: <20220504110403.613168-8-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Switch statements for the code segments that handle nanoMIPS
instruction pools P.LL, P.SC, P.SHIFT, P.LS.S1, P.LS.E0, PP.LSXS
do not have proper default case, resulting in not generating
reserved instruction exception for certain illegal opcodes.
Fix this by adding default cases for these switch statements that
trigger reserved instruction exception.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-7-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA does not support unaligned memory access. Adjust
DisasContext's default_tcg_memop_mask to reflect this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-6-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If both rs and rt are the same register, the nanoMIPS instruction
BNEC[32] rs, rt, address is equivalent to NOP (branch is not taken and
there is no delay slot). This commit provides such behavior. Without
this commit, this scenario results in an incorrect behavior.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-5-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are currently two problems related to the emulation of the
instruction BPOSGE32C.
The nanoMIPS instruction BPOSGE32C belongs to DSP R3 instructions
(actually, as of now, it is the only instruction of DSP R3). The
presence of DSP R3 instructions in QEMU is indicated by the flag
MIPS_HFLAG_DSP_R3 (0x20000000). This flag is currently being properly
set in CPUMIPSState's hflags (for example, for I7200 nanoMIPS CPU).
However, it is not propagated to DisasContext's hflags, since the flag
MIPS_HFLAG_DSP_R3 is not set in MIPS_HFLAG_TMASK (while similar flags
MIPS_HFLAG_DSP_R2 and MIPS_HFLAG_DSP are set in this mask, and there
is no problem in functioning check_dsp_r2(), check_dsp()). This means
the function check_dsp_r3() currently does not work properly, and the
emulation of BPOSGE32C can not work properly as well.
Change MIPS_HFLAG_TMASK from 0x1F5807FF to 0x3F5807FF (logical OR
with 0x20000000) to fix this.
Additionally, check_cp1_enabled() is currently incorrectly called
while emulating BPOSGE32C. BPOSGE32C is in the same pool (P.BR1) as
FPU branch instruction BC1EQZC and BC1NEZC, but it not a part of FPU
(CP1) instructions, and check_cp1_enabled() should not be involved
while emulating BPOSGE32C.
Rearrange invocations of check_cp1_enabled() within P.BR1 pool
handling to affect only BC1EQZC and BC1NEZC emulation, and not
BPOSGE32C emulation.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-4-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field rs in the instruction EXTRV_S.H rt, ac, rs is specified in
nanoMIPS documentation as opcode[20..16]. It is, however, erroneously
considered as opcode[25..21] in the current QEMU implementation. In
function gen_pool32axf_2_nanomips_insn(), the variable v0_t corresponds
to rt/opcode[25..21], and v1_t corresponds to rs/opcode[20..16]), and
v0_t is by mistake passed to the helper gen_helper_extr_s_h().
Use v1_t rather than v0_t in the invocation of gen_helper_extr_s_h()
to fix this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-3-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field ac in nanoMIPS instruction MTHLIP rs, ac is specified in
nanoMIPS documentation as opcode[15..14] (2 bits). However, in the
current QEMU code, the corresponding argument passed to the helper
gen_helper_mthlip() has the value of opcode[15..11] (5 bits). Right
shift the value of this argument by three bits to fix this.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-2-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Richard Henderson
Bernhard Beschow
Mark Cave-Ayland
Peter Maydell
Stefan Pejic
Dragan Mladjenovic