The compilation flags for proper building are in the source tree. We
also fix exit to 0 so the result is counted as a success.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
With this you can launch a test in gdb with:
cd $(BUILD)/tests
make -f $(SRC)/tests/tcg/Makefile gdb-$(TEST_NAME)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We can't rely on shell redirect magic to get things right so lets
setup a common output chardev that is expecting to write to files. As
we have split run-test up we might as well move the default monitor
bits into the call.
Finally a little make sophistry is required to correctly quote
$(COMMA) and as we don't inherit common rules we have our own little
copy here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This will allow tests to modify the QEMU invocation with for example
different -cpu stazas without having to define a whole new set of
runner types.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Best to be explicit about where to find things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In an out-of-tree build gcovr can get quite confused about what is
going on otherwise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The --enable-modules build is consistently tripping the time limit so
reduce our target list to the "major" architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will be moving all builds out of tree eventually but for now we
need to for building the docs as sphinx requires an out-of-tree build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Travis enforce the use of the git protocol v2 on their images,
but the 'xcode10' image doesn't handle this correctly, resulting
in the brew packages installation failing:
$ git config protocol.version
2
$ rvm $brew_ruby do brew bundle --verbose --global
/usr/local/bin/brew tap homebrew/bundle
==> Tapping homebrew/bundle
Cloning into '/usr/local/Homebrew/Library/Taps/homebrew/homebrew-bundle'...
fatal: unknown value for config 'protocol.version': 2
Error: Failure while executing; `git clone https://github.com/Homebrew/homebrew-bundle /usr/local/Homebrew/Library/Taps/homebrew/homebrew-bundle --depth=1` exited with 128.
Error: Failure while executing; `/usr/local/bin/brew tap homebrew/bundle` exited with 1.
The newer 'xcode10.2' beta [*] image doesn't have this limitation.
This image comes with the following brew packages pre-installed,
which extend the current code coverage:
- libffi
- libpng
- libtasn1
- gnutls
- jpeg
- nettle
[*] https://blog.travis-ci.com/2019-02-12-xcode-10-2-beta-2-is-now-available
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190220193541.24419-1-philmd@redhat.com>
[AJB: re-enabled MacOS build first]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bunch of minor style problems
* Suppressed warnings about Spectre/Meltdown mitigations with TCG
* Added one more patch, a preliminary fix towards the not-quite-ready
support for NVLink VFIO passthrough.
This is a final pull request before the 4.0 soft freeze. Changes
include:
* A Great Renaming to use camel case properly in spapr code
* Optimization of some vector instructions
* Support for POWER9 cpus in the powernv machine
* Fixes a regression from the last pull request in handling VSX
instructions with mixed operands from the FPR and VMX parts of the
register array
* Optimization hack to avoid scanning all the (empty) entries on a
new IOMMU window
* Add FSL I2C controller model for E500
* Support for KVM acceleration of the H_PAGE_INIT hypercall on spapr
* Update u-boot image for E500
* Enable Specre/Meltdown mitigations by default on the new machine type
* Enable large decrementer support for POWER9
-----BEGIN PGP SIGNATURE-----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=f+No
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190312' into staging
ppc patch queue for 2019-03-10
This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bunch of minor style problems
* Suppressed warnings about Spectre/Meltdown mitigations with TCG
* Added one more patch, a preliminary fix towards the not-quite-ready
support for NVLink VFIO passthrough.
This is a final pull request before the 4.0 soft freeze. Changes
include:
* A Great Renaming to use camel case properly in spapr code
* Optimization of some vector instructions
* Support for POWER9 cpus in the powernv machine
* Fixes a regression from the last pull request in handling VSX
instructions with mixed operands from the FPR and VMX parts of the
register array
* Optimization hack to avoid scanning all the (empty) entries on a
new IOMMU window
* Add FSL I2C controller model for E500
* Support for KVM acceleration of the H_PAGE_INIT hypercall on spapr
* Update u-boot image for E500
* Enable Specre/Meltdown mitigations by default on the new machine type
* Enable large decrementer support for POWER9
# gpg: Signature made Tue 12 Mar 2019 08:14:51 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190312: (62 commits)
vfio: Make vfio_get_region_info_cap public
Suppress test warnings about missing Spectre/Meltdown mitigations with TCG
spapr: Use CamelCase properly
target/ppc: Optimize x[sv]xsigdp using deposit_i64()
target/ppc: Optimize xviexpdp() using deposit_i64()
target/ppc: add HV support for POWER9
ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9
ppc/pnv: add more dummy XSCOM addresses
ppc/pnv: activate XSCOM tests for POWER9
ppc/pnv: POWER9 XSCOM quad support
ppc/pnv: extend XSCOM core support for POWER9
ppc/pnv: add a OCC model for POWER9
ppc/pnv: add a OCC model class
ppc/pnv: add SerIRQ routing registers
ppc/pnv: add a LPC Controller model for POWER9
ppc/pnv: add a 'dt_isa_nodename' to the chip
ppc/pnv: add a LPC Controller class model
ppc/pnv: lpc: fix OPB address ranges
ppc/pnv: add a PSI bridge model for POWER9
ppc/pnv: add a PSI bridge class model
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes vfio_get_region_info_cap() to be used in quirks.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190307050518.64968-3-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new pseries-4.0 machine type defaults to enabling Spectre/Meltdown
mitigations. Unfortunately those mitigations aren't implemented for TCG
because we're not yet sure if they're necessary or how to implement them.
We don't fail fatally, but we do warn in this case, because it is quite
plausible that Spectre/Meltdown can be exploited through TCG (at least for
the guest to get access to the qemu address space).
This create noise in our testcases though. So, modify the affected tests
to explicitly disable the mitigations to suppress these warnings.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of. There are quite a lot of
places where we bend the rules in order to preserve the capitalization of
internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR".
That was a bad idea - it frequently leads to names ending up with hard to
read clusters of capital letters, and means they don't catch the eye as
type identifiers, which is kind of the point of the CamelCase convention in
the first place.
In short, keeping type identifiers look like CamelCase is more important
than preserving standard capitalization of internal "words". So, this
patch renames a heap of spapr internal type names to a more standard
CamelCase.
In addition to case changes, we also make some other identifier renames:
VIOsPAPR* -> SpaprVio*
The reverse word ordering was only ever used to mitigate the capital
cluster, so revert to the natural ordering.
VIOsPAPRVTYDevice -> SpaprVioVty
VIOsPAPRVLANDevice -> SpaprVioVlan
Brevity, since the "Device" didn't add useful information
sPAPRDRConnector -> SpaprDrc
sPAPRDRConnectorClass -> SpaprDrcClass
Brevity, and makes it clearer this is the same thing as a "DRC"
mentioned in many other places in the code
This is 100% a mechanical search-and-replace patch. It will, however,
conflict with essentially any and all outstanding patches touching the
spapr code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190309214255.9952-3-f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The t0 tcg_temp register is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190309214255.9952-2-f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We now have enough support to boot a PowerNV machine with a POWER9
processor. Allow HV mode on POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-16-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Activate only stop0 and stop1 levels. We should not need more levels
when under QEMU.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-15-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To improve OPAL/skiboot support. We don't need to strictly model these
XSCOM accesses.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-14-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We now have enough support to let the XSCOM test run on POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-13-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The POWER9 processor does not support per-core frequency control. The
cores are arranged in groups of four, along with their respective L2
and L3 caches, into a structure known as a Quad. The frequency must be
managed at the Quad level.
Provide a basic Quad model to fake the settings done by the firmware
on the Non-Cacheable Unit (NCU). Each core pair (EX) needs a special
BAR setting for the TIMA area of XIVE because it resides on the same
address on all chips.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-12-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide a new class attribute to define XSCOM operations per CPU
family and add a couple of XSCOM addresses controlling the power
management states of the core on POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-11-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OCC on POWER9 is very similar to the one found on POWER8. Provide
the same routines with P9 values for the registers and IRQ number.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-10-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To ease the introduction of the OCC model for POWER9, provide a new
class attributes to define XSCOM operations per CPU family and a PSI
IRQ number.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190307223548.20516-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is just a simple reminder that SerIRQ routing should be
addressed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-8-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LPC Controller on POWER9 is very similar to the one found on
POWER8 but accesses are now done via on MMIOs, without the XSCOM and
ECCB logic. The device tree is populated differently so we add a
specific POWER9 routine for the purpose.
SerIRQ routing is yet to be done.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ISA bus has a different DT nodename on POWER9. Compute the name
when the PnvChip is realized, that is before it is used by the machine
to populate the device tree with the ISA devices.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-6-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will ease the introduction of the LPC Controller model for POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190307223548.20516-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PowerNV LPC Controller exposes different sets of registers for
each of the functional units it encompasses, among which the OPB
(On-Chip Peripheral Bus) Master and Arbitrer and the LPC HOST
Controller.
The mapping addresses of each register range are correct but the sizes
are too large. Fix the sizes and define the OPB Arbitrer range to fill
the gap between the OPB Master registers and the LPC HOST Controller
registers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PSI bridge on POWER9 is very similar to POWER8. The BAR is still
set through XSCOM but the controls are now entirely done with MMIOs.
More interrupts are defined and the interrupt controller interface has
changed to XIVE. The POWER9 model is a first example of the usage of
the notify() handler of the XiveNotifier interface, linking the PSI
XiveSource to its owning device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To ease the introduction of the PSI bridge model for POWER9, abstract
the POWER chip differences in a PnvPsi class model and introduce a
specific Pnv8Psi type for POWER8. POWER8 interface to the interrupt
controller is still XICS whereas POWER9 uses the new XIVE model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -drive to configure the hd drive for the New World machine, the node
name "disk" should be used instead of the "hd" alias.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307212058.4890-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -drive to configure the hd drive for the Old World machine, the node
name "disk" should be used instead of the "hd" alias.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307212058.4890-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all VSX registers are stored in host endian order, there is no need
to go via different accessors depending upon the register number. Instead we
introduce vsr64_offset() and use it directly from within get_cpu_vsr{l,h}() and
set_cpu_vsr{l,h}().
This also allows us to rewrite avr64_offset() and fpr_offset() in terms of the
new vsr64_offset() function to more clearly express the relationship between the
VSX, FPR and VMX registers, and also remove vsrl_offset() which is no longer
required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-8-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When VSX support was initially added, the fpr registers were added at
offset 0 of the VSR register and the vsrl registers were added at offset
1. This is in contrast to the VMX registers (the last 32 VSX registers) which
are stored in host-endian order.
Switch the fpr/vsrl registers so that the lower 32 VSX registers are now also
stored in host endian order to match the VMX registers. This ensures that TCG
vector operations involving mixed VMX and VSX registers will function
correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By using the VsrD macro in avr64_offset() the same offset calculation can be
used regardless of the host endian. This allows get_avr64() and set_avr64() to
be simplified accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All TCG vector operations require pointers to the base address of the vector
rather than separate access to the top and bottom 64-bits. Convert the VMX TCG
instructions to use a new avr_full_offset() function instead of avr64_offset()
which can then itself be written as a simple wrapper onto vsr_full_offset().
This same function can also reused in cpu_avr_ptr() to avoid having more than
one copy of the offset calculation logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It isn't possible to include internal.h from cpu.h so move the Vsr* macros
into cpu.h alongside the other VMX/VSX register access functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of having multiple copies of the offset calculation logic, move it to a
single vsrl_offset() function.
This commit also renames the existing get_vsr()/set_vsr() functions to
get_vsrl()/set_vsrl() which better describes their purpose.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of having multiple copies of the offset calculation logic, move it to a
single fpr_offset() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On sPAPR vfio_listener_region_add() is called in 2 situations:
1. a new listener is registered from vfio_connect_container();
2. a new IOMMU Memory Region is added from rtas_ibm_create_pe_dma_window().
In both cases vfio_listener_region_add() calls
memory_region_iommu_replay() to notify newly registered IOMMU notifiers
about existing mappings which is totally desirable for case 1.
However for case 2 it is nothing but noop as the window has just been
created and has no valid mappings so replaying those does not do anything.
It is barely noticeable with usual guests but if the window happens to be
really big, such no-op replay might take minutes and trigger RCU stall
warnings in the guest.
For example, a upcoming GPU RAM memory region mapped at 64TiB (right
after SPAPR_PCI_LIMIT) causes a 64bit DMA window to be at least 128TiB
which is (128<<40)/0x10000=2.147.483.648 TCEs to replay.
This mitigates the problem by adding an "skipping_replay" flag to
sPAPRTCETable and defining sPAPR own IOMMU MR replay() hook which does
exactly the same thing as the generic one except it returns early if
@skipping_replay==true.
Another way of fixing this would be delaying replay till the very first
H_PUT_TCE but this does not work if in-kernel H_PUT_TCE handler is
enabled (a likely case).
When "ibm,create-pe-dma-window" is complete, the guest will map only
required regions of the huge DMA window.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190307050518.64968-2-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reset all regs but keep the MMIO BAR enabled as it is at realize time.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190306085032.15744-14-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a simple helper to translate XSCOM addresses to MMIO addresses
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190306085032.15744-13-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NSR register of the HV ring has a different, although similar, bit
layout. TM_QW3_NSR_HE_PHYS bit should now be raised when the
Hypervisor interrupt line is signaled. Other bits TM_QW3_NSR_HE_POOL
and TM_QW3_NSR_HE_LSI are not modeled. LSI are for special interrupts
reserved for HW bringup and the POOL bit is used when signaling a
group of VPs. This is not currently implemented in Linux but it is in
pHyp.
The most important special commands on the HV TIMA page are added to
let the core manage interrupts : acking and changing the CPU priority.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190306085032.15744-10-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The POWER9 and POWER8 processors have different interrupt controllers,
and reporting their state requires calling different helper routines.
However, the interrupt presenters are still handled in the higher
level pic_print_info() routine because they are not related to the
chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190306085032.15744-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
