For the purpose of rebuild_hflags_a64, we do not need to compute
all of the va parameters, only tbi. Moreover, we can compute them
in a form that is more useful to storing in hflags.
This eliminates the need for aa64_va_parameter_both, so fold that
in to aa64_va_parameter. The remaining calls to aa64_va_parameter
are in get_phys_addr_lpae and in pauth_helper.c.
This reduces the total cpu consumption of aa64_va_parameter in a
kernel boot plus a kvm guest kernel boot from 3% to 0.5%.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that aa64_va_parameters_both sets select based on the number
of ranges in the regime, the ttbr1_valid check is redundant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Select should always be 0 for a regime with one range.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The psuedocode in aarch64/functions/pac/auth/Auth and
aarch64/functions/pac/strip/Strip always uses bit 55 for
extfield and do not consider if the current regime has 2 ranges.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200216194343.21331-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now, the z2 machine only boots if a flash image is provided.
This is not really necessary; the machine can boot from initrd or from
SD without it. At the same time, having to provide dummy flash images
is a nuisance and does not add any real value. Make it optional.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210903.18602-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now, the mainstone machine only boots if two flash images are
provided. This is not really necessary; the machine can boot from initrd
or from SD without it. At the same time, having to provide dummy flash
images is a nuisance and does not add any real value. Make it optional.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210824.18513-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix warning reported by Clang static code analyzer:
CC hw/misc/iotkit-secctl.o
hw/misc/iotkit-secctl.c:343:9: warning: Value stored to 'value' is never read
value &= 0x00f000f3;
^ ~~~~~~~~~~
Fixes: b3717c23e1
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200217132922.24607-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This returns a fixed but non-zero value for the chip id.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This splits the common write callback into separate ast2400 and ast2500
implementations. This makes it clearer when implementing differing
behaviour.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=hrAW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200221' into staging
ppc patch queue 2020-02-21
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
# gpg: Signature made Fri 21 Feb 2020 03:35:40 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200221:
hw/ppc/virtex_ml507:fix leak of fdevice tree blob
spapr: Fix handling of unplugged devices during CAS and migration
spapr: Don't use spapr_drc_needed() in CAS code
ppc: free 'fdt' after reset the machine
target/ppc/cpu.h: Clean up comments in the struct CPUPPCState definition
target/ppc/cpu.h: Move fpu related members closer in cpu env
target/ppc: Fix typo in comments
spapr: Allow changing offset for -kernel image
pnv/phb3: Add missing break statement
pnv/phb4: Fix error path in pnv_pec_realize()
pnv/phb3: Convert 1u to 1ull
target/ppc/cpu.h: Remove duplicate includes
spapr: Add Hcalls to support PAPR NVDIMM device
spapr: Add NVDIMM device support
nvdimm: add uuid property to nvdimm
mem: move nvdimm_device_list to utilities
ppc: function to setup latest class options
ppc/pnv: Fix PCI_EXPRESS dependency
qtest: Fix rtas dependencies
spapr/rtas: Print message from "ibm,os-term"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl5Ork4SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9A7XYH/RFs+kxf+v9V1qE1rwdbJCXdA36/JIoF
AW6CtPk47vEodvssjgPBygs/GBqQDdkpZKyA42ZxrE3dPeyRCusncYKRRFPbP4Oq
pXj/ZYy9YBn0LIqK41kmXgMdm9HZ113WcG5/rNuh5DOtwX7e688tmHXOHbT8MKAR
q/nBK1AVNVxFyBRnRow/YK1jGXmA5rIoONVd6Spkj/5xmKZJ6RtpQb1+WnD7HI3j
TVvDcEnKGCT/qZ73rJ6UFRIUdllAQ7fJAOLnXYFwcwkErq3fMEwLpq3syuiuks+B
KoFlUzCsM3xiASGnz5MgZI7EVhjGzruneVoBrSyhjlRqNaOB2pYeBwQ=
=4/ZP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-02-20' into staging
Block patches:
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
# gpg: Signature made Thu 20 Feb 2020 16:05:34 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-02-20:
iotests: Test snapshot -l field separation
block: Fix VM size field width in snapshot dump
iotests: Test convert -n -B to backing-less target
qemu-img: Fix convert -n -B for backing-less targets
iotests: Add test for image creation fallback
iscsi: Drop iscsi_co_create_opts()
file-posix: Drop hdev_co_create_opts()
block: Generic file creation fallback
block/nbd: Fix hang in .bdrv_close()
iotests/279: Fix for non-qcow2 formats
block/backup-top: fix flags handling
block: always fill entire LUKS header space with zeros
qemu-img: Add --target-is-zero to convert
qapi: Allow getting flat output from 'query-named-block-nodes'
iotests/147: Fix drive parameters
iotests: Remove the superfluous 2nd check for the availability of quorum
docs: qcow2: introduce compression type feature
docs: improve qcow2 spec about extending image header
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20200218091154.21696-3-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We already detect if a device is being hot plugged before CAS to trigger
a CAS reboot and during migration to migrate the state of the associated
DRC. But hot unplugging a device is also an asynchronous operation that
requires the guest to take action. This means that if the guest is migrated
after the hot unplug event was sent but before it could release the device
with RTAS, the destination QEMU doesn't know about the pending unplug
operation and doesn't actually remove the device when the guest finally
releases it.
Similarly, if the unplug request is fired before CAS, the guest isn't
notified of the change, just like with hotplug. It ends up booting with
the device still present in the DT and configures it, just like it was
never removed. Even weirder, since the event is still queued, it will
be eventually processed when some other unrelated event is posted to
the guest.
Enhance spapr_drc_transient() to also return true if an unplug request is
pending. This fixes the issue at CAS with a CAS reboot request and
causes the DRC state to be migrated. Some extra care is still needed to
inform the destination that an unplug request is pending : migrate the
unplug_requested field of the DRC in an optional subsection. This might
break backwards migration, but this is still better than ending with
an inconsistent guest.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158169248798.3465937.1108351365840514270.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently don't support hotplug of devices between boot and CAS. If
this happens a CAS reboot is triggered. We detect this during CAS using
the spapr_drc_needed() function which is essentially a VMStateDescription
.needed callback. Even if the condition for CAS reboot happens to be the
same as for DRC migration, it looks wrong to piggyback a migration helper
for this.
Introduce a helper with slightly more explicit name and use it in both CAS
and DRC migration code. Since a subsequent patch will enhance this helper
to cover the case of hot unplug, let's go for spapr_drc_transient(). While
here convert spapr_hotplugged_dev_before_cas() to the "transient" wording as
well.
This doesn't change any behaviour.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158169248180.3465937.9531405453362718771.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'fdt' forgot to clean both e500 and pnv when we call 'system_reset' on ppc,
this patch fix it. The leak stacks are as follow:
Direct leak of 4194304 byte(s) in 4 object(s) allocated from:
#0 0x7fafe37dd970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7fafe2e3149d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x561876f7f80d in create_device_tree /mnt/sdb/qemu-new/qemu/device_tree.c:40
#3 0x561876b7ac29 in ppce500_load_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:364
#4 0x561876b7f437 in ppce500_reset_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:617
#5 0x56187718b1ae in qemu_devices_reset /mnt/sdb/qemu-new/qemu/hw/core/reset.c:69
#6 0x561876f6938d in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1412
#7 0x561876f6a25b in main_loop_should_exit /mnt/sdb/qemu-new/qemu/vl.c:1645
#8 0x561876f6a398 in main_loop /mnt/sdb/qemu-new/qemu/vl.c:1679
#9 0x561876f7da8e in main /mnt/sdb/qemu-new/qemu/vl.c:4438
#10 0x7fafde16b812 in __libc_start_main ../csu/libc-start.c:308
#11 0x5618765c055d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)
Direct leak of 1048576 byte(s) in 1 object(s) allocated from:
#0 0x7fc0a6f1b970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7fc0a656f49d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55eb05acd2ca in pnv_dt_create /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:507
#3 0x55eb05ace5bf in pnv_reset /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:578
#4 0x55eb05f2f395 in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1410
#5 0x55eb05f43850 in main /mnt/sdb/qemu-new/qemu/vl.c:4403
#6 0x7fc0a18a9812 in __libc_start_main ../csu/libc-start.c:308
#7 0x55eb0558655d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200214033206.4395-1-pannengyuan@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu env struct is quite complex but comments supposed to explain
it in its definition just make it harder to read. Reformat and reword
some comments to make it clearer and more readable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8707144ab1ccf9c5c89a39c2d7a0b02307ca25d4.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move fp_status and fpscr closer to other floating point and vector
related members in cpu env definition so they are in one group.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b50e9e7eec2c383ae878b397d0b2927efc9ea43.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
"Deferred" was misspelled as "differed" in some comments, correct this
typo,
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200214155748.0896B745953@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows moving the kernel in the guest memory. The option is useful
for step debugging (as Linux is linked at 0x0); it also allows loading
grub which is normally linked to run at 0x20000.
This uses the existing kernel address by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032943.121178-6-aik@ozlabs.ru>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We obviously don't want to print out an error message if addr points to
a valid register.
Reported-by: Coverity CID 1419391 Missing break in switch
Fixes: 9ae1329ee2 "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153365202.3229002.11521084761048102466.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Obviously, we want to pass &local_err so that we can check it then
line below, not errp.
Reported-by: Coverity CID 1419395 'Constant' variable guards dead code
Fixes: 4f9924c4d4 "ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153364605.3229002.2796177658957390343.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As reported by Coverity defect CID 1419397, the 'j' variable goes up to
63 and shouldn't be used to left shift a 32-bit integer.
The result of the operation goes to a 64-bit integer : use a 64-bit
constant.
Reported-by: Coverity CID 1419397 Bad bit shift operation
Fixes: 9ae1329ee2 "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153364010.3229002.8004283672455615950.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 74433bf083 added some includes but added them twice. Since
these are guarded against multiple inclusion including them once is
enough.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200212223207.5A37574637F@zero.eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch implements few of the necessary hcalls for the nvdimm support.
PAPR semantics is such that each NVDIMM device is comprising of multiple
SCM(Storage Class Memory) blocks. The guest requests the hypervisor to
bind each of the SCM blocks of the NVDIMM device using hcalls. There can
be SCM block unbind requests in case of driver errors or unplug(not
supported now) use cases. The NVDIMM label read/writes are done through
hcalls.
Since each virtual NVDIMM device is divided into multiple SCM blocks,
the bind, unbind, and queries using hcalls on those blocks can come
independently. This doesn't fit well into the qemu device semantics,
where the map/unmap are done at the (whole)device/object level granularity.
The patch doesnt actually bind/unbind on hcalls but let it happen at the
device_add/del phase itself instead.
The guest kernel makes bind/unbind requests for the virtual NVDIMM device
at the region level granularity. Without interleaving, each virtual NVDIMM
device is presented as a separate guest physical address range. So, there
is no way a partial bind/unbind request can come for the vNVDIMM in a
hcall for a subset of SCM blocks of a virtual NVDIMM. Hence it is safe to
do bind/unbind everything during the device_add/del.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <158131059899.2897.11515211602702956854.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm
device interface in QEMU to support virtual NVDIMM devices for Power.
Create the required DT entries for the device (some entries have
dummy values right now).
The patch creates the required DT node and sends a hotplug
interrupt to the guest. Guest is expected to undertake the normal
DR resource add path in response and start issuing PAPR SCM hcalls.
The device support is verified based on the machine version unlike x86.
This is how it can be used ..
Ex :
For coldplug, the device to be added in qemu command line as shown below
-object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
-device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
For hotplug, the device to be added from monitor as below
object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[Early implementation]
Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For ppc64, PAPR requires the nvdimm device to have UUID property
set in the device tree. Add an option to get it from the user.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158131056931.2897.14057087440721445976.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to add more init for the latest machine, so move the setup
to a function so we don't have to change the DEFINE_SPAPR_MACHINE macro
each time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200207064628.1196095-1-mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When PHB4 bridge has been added, the dependencies to PCIE_PORT has been
added to XIVE_SPAPR and indirectly to PSERIES.
The build of the PowerNV machine is fine while we also build the PSERIES
machine.
If we disable the PSERIES machine, the PowerNV build fails because the
PCI Express files are not built:
/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power8_pic_print_info':
.../hw/ppc/pnv.c:623: undefined reference to `pnv_phb3_msi_pic_print_info'
/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power9_pic_print_info':
.../hw/ppc/pnv.c:639: undefined reference to `pnv_phb4_pic_print_info'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_write_config':
.../hw/usb/hcd-ehci-pci.c:129: undefined reference to `pci_default_write_config'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_realize':
.../hw/usb/hcd-ehci-pci.c:68: undefined reference to `pci_allocate_irq'
/usr/bin/ld: .../hw/usb/hcd-ehci-pci.c:72: undefined reference to `pci_register_bar'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'
This patch fixes the problem by adding needed dependencies to POWERNV.
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200205232016.588202-3-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qtest "rtas" command is only available with pseries not all ppc64 targets,
so if I try to compile only powernv machine, the build fails with:
/usr/bin/ld: qtest.o: in function `qtest_process_command':
.../qtest.c:645: undefined reference to `qtest_rtas_call'
We fix this by enabling rtas command only with pseries machine.
Fixes: eeddd59f59 ("tests: add RTAS command in the protocol")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200205232016.588202-2-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ibm,os-term" RTAS call has a single parameter which is a pointer to
a message from the guest kernel about the termination cause; this prints
it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032044.118585-1-aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
-----BEGIN PGP SIGNATURE-----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=WAH+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging
Implement membarrier, SO_RCVTIMEO and SO_SNDTIMEO
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
# gpg: Signature made Thu 20 Feb 2020 09:20:20 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
linux-user: Add support for selected alsa timer instructions using ioctls
linux-user: Add support for getting/setting selected alsa timer parameters using ioctls
linux-user: Add support for selecting alsa timer using ioctl
linux-user: Add support for getting/setting specified alsa timer parameters using ioctls
linux-user: Add support for getting alsa timer version and id
linux-user: remove gemu_log from the linux-user tree
linux-user: Use `qemu_log' for strace
linux-user: Use `qemu_log' for non-strace logging
configure: Avoid compiling system tools on user build by default
linux-user/strace: Improve output of various syscalls
configure: linux-user doesn't need neither fdt nor slirp
linux-user: implement getsockopt SO_RCVTIMEO and SO_SNDTIMEO
linux-user: Implement membarrier syscall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test that all fields in "qemu-img snapshot -l"s output are
separated by spaces.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Renamed test from 284 to 286]
Signed-off-by: Max Reitz <mreitz@redhat.com>
When printing the snapshot list (e.g. with qemu-img snapshot -l), the VM
size field is only seven characters wide. As of de38b5005e, this is
not necessarily sufficient: We generally print three digits, and this
may require a decimal point. Also, the unit field grew from something
as plain as "M" to " MiB". This means that number and unit may take up
eight characters in total; but we also want spaces in front.
Considering previously the maximum width was four characters and the
field width was chosen to be three characters wider, let us adjust the
field width to be eleven now.
Fixes: de38b5005e
Buglink: https://bugs.launchpad.net/qemu/+bug/1859989
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This must not crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-3-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
s.target_has_backing does not reflect whether the target BDS has a
backing file; it only tells whether we should use a backing file during
conversion (specified by -B).
As such, if you use convert -n, the target does not necessarily actually
have a backing file, and then dereferencing out_bs->backing fails here.
When converting to an existing file, we should set
target_backing_sectors to a negative value, because first, as the
comment explains, this value is only used for optimization, so it is
always fine to do that.
Second, we use this value to determine where the target must be
initialized to zeroes (overlays are initialized to zero after the end of
their backing file). When converting to an existing file, we cannot
assume that to be true.
Cc: qemu-stable@nongnu.org
Fixes: 351c8efff9
("qemu-img: Special post-backing convert handling")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-2-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Added a note that NBD does not support resizing, which is why
the second case is expected to fail]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The generic fallback implementation effectively does the same.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-5-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The generic fallback implementation effectively does the same.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-4-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If a protocol driver does not support image creation, we can see whether
maybe the file exists already. If so, just truncating it will be
sufficient.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-3-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When nbd_close() is called from a coroutine, the connection_co never
gets to run, and thus nbd_teardown_connection() hangs.
This is because aio_co_enter() only puts the connection_co into the main
coroutine's wake-up queue, so this main coroutine needs to yield and
wait for connection_co to terminate.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
First, driver=qcow2 will not work so well with non-qcow2 formats (and
this test claims to support qcow, qed, and vmdk).
Second, vmdk will always report the backing file format to be vmdk.
Filter that out so the output looks like for all other formats.
Third, the flat vmdk subformats do not support backing files, so they
will not work with this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191219144243.1763246-1-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
backup-top "supports" write-unchanged, by skipping CBW operation in
backup_top_co_pwritev. But it forgets to do the same in
backup_top_co_pwrite_zeroes, as well as declare support for
BDRV_REQ_WRITE_UNCHANGED.
Fix this, and, while being here, declare also support for flags
supported by source child.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200207161231.32707-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When initializing the LUKS header the size with default encryption
parameters will currently be 2068480 bytes. This is rounded up to
a multiple of the cluster size, 2081792, with 64k sectors. If the
end of the header is not the same as the end of the cluster we fill
the extra space with zeros. This was forgetting that not even the
space allocated for the header will be fully initialized, as we
only write key material for the first key slot. The space left
for the other 7 slots is never written to.
An optimization to the ref count checking code:
commit a5fff8d4b4 (refs/bisect/bad)
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Wed Feb 27 16:14:30 2019 +0300
qcow2-refcount: avoid eating RAM
made the assumption that every cluster which was allocated would
have at least some data written to it. This was violated by way
the LUKS header is only partially written, with much space simply
reserved for future use.
Depending on the cluster size this problem was masked by the
logic which wrote zeros between the end of the LUKS header and
the end of the cluster.
$ qemu-img create --object secret,id=cluster_encrypt0,data=123456 \
-f qcow2 -o cluster_size=2k,encrypt.iter-time=1,\
encrypt.format=luks,encrypt.key-secret=cluster_encrypt0 \
cluster_size_check.qcow2 100M
Formatting 'cluster_size_check.qcow2', fmt=qcow2 size=104857600
encrypt.format=luks encrypt.key-secret=cluster_encrypt0
encrypt.iter-time=1 cluster_size=2048 lazy_refcounts=off refcount_bits=16
$ qemu-img check --object secret,id=cluster_encrypt0,data=redhat \
'json:{"driver": "qcow2", "encrypt.format": "luks", \
"encrypt.key-secret": "cluster_encrypt0", \
"file.driver": "file", "file.filename": "cluster_size_check.qcow2"}'
ERROR: counting reference for region exceeding the end of the file by one cluster or more: offset 0x2000 size 0x1f9000
Leaked cluster 4 refcount=1 reference=0
...snip...
Leaked cluster 130 refcount=1 reference=0
1 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
127 leaked clusters were found on the image.
This means waste of disk space, but no harm to data.
Image end offset: 268288
The problem only exists when the disk image is entirely empty. Writing
data to the disk image payload will solve the problem by causing the
end of the file to be extended further.
The change fixes it by ensuring that the entire allocated LUKS header
region is fully initialized with zeros. The qemu-img check will still
fail for any pre-existing disk images created prior to this change,
unless at least 1 byte of the payload is written to.
Fully writing zeros to the entire LUKS header is a good idea regardless
as it ensures that space has been allocated on the host filesystem (or
whatever block storage backend is used).
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200207135520.2669430-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In many cases the target of a convert operation is a newly provisioned
target that the user knows is blank (reads as zero). In this situation
there is no requirement for qemu-img to wastefully zero out the entire
device.
Add a new option, --target-is-zero, allowing the user to indicate that
an existing target device will return zeros for all reads.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200205110248.2009589-2-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
