Response format r6 includes a subset of the status bits;
clear the clear-on-read bits which are read by an r6 response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix some bugs in our implementation of the APP_CMD status bit:
* the response to an ACMD should have APP_CMD set, not cleared
* if an illegal ACMD is sent then the next command should be
handled as a normal command
This requires that we split "card is expecting an ACMD" from
the state of the APP_CMD status bit (the latter indicates
both "expecting ACMD" and "that was an ACMD").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Correct how we handle the type B ("cleared on valid command")
status bits. In particular, the CURRENT_STATE bits in a response
should be the state of the card when it received that command,
not the state when it received the preceding command. (This is
one of the issues noted in LP:597641.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
App commands in an invalid state should set ILLEGAL_COMMAND, not
merely return a zero response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Handle returning CRC and locked-card errors in the same code path
we use for other responses. This makes no difference in behaviour
but means that these error responses will be printed by the debug
logging code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add an extra sd_illegal value to the sd_rsp_type_t enum so that
sd_app_command() and sd_normal_command() can tell sd_do_command()
that the command was illegal. This is needed so we can do things
like reset certain status bits only on receipt of a valid command.
For the moment, just use it to pull out the setting of the
ILLEGAL_COMMAND status bit into sd_do_command().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix a typo that meant that ADDRESS_ERRORs setting or clearing write
protection would clear every other bit in the status register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
If we fail to validate the CRC for an SD command we should be setting
COM_CRC_ERROR, not clearing it. (This bug actually has no effect currently
because sd_req_crc_validate() always returns success.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add a clarifying comment about what the CARD_STATUS_[ABC]
macros are defining.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix bugs in the code determining whether to accept a command when the
SD card is locked. Most notably, we had the condition completely
reversed, so we would accept all the commands we should refuse and
refuse all the commands we should accept. Correct this by refactoring
the enormous if () clause into a separate function.
We had also missed ACMD42 off the list of commands which are accepted
in locked state: add it.
This is one of the two problems reported in LP:597641.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
To let device models distinguish between eject and load.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should be able to use it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This leads to random off-by-one error.
When the size of the SD is exactly 1GB, the emulation was returning a
wrong SDHC CSD descriptor.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK
QEmu throws an error saying that we've run off the end, and leaves
itself in the wrong state.
Tested on ARM Vexpress model.
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The SDIO specification introduces new commands 52 and 53.
Handle as illegal command but do not complain on stderr,
as SDIO-aware OSes (including Linux) may legitimately use
these in their probing for presence of an SDIO card.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sd_set_cb() calls bdrv_is_read_only() and bdrv_is_inserted() even if
no block driver is associated with the card reader.
This patch fixes the issues by not setting the irq in this case, this
fixes ARM versatile crash.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SD_STATUS and SEND_NUM_WR_BLOCKS commands are supposed to cause
the card to send data back to the host. However sd.c was missing the
state change to sd_sendingdata_state for these commands, with the effect
that the Linux driver would either hang indefinitely waiting for
nonexistent data (pl181) or read zeroes and provoke a qemu warning
message (omap).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Extend the change_cb callback with a reason argument, and use it
to tell drivers about size changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
./hw/sd.c: In function ‘sd_init’:
./hw/sd.c:443: error: implicit declaration of function ‘qemu_blockalign’
./hw/sd.c:443: error: nested extern declaration of ‘qemu_blockalign’
./hw/sd.c:443: error: assignment makes pointer from integer without a cast
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use qemu_blockalign for all allocations in the block layer. This allows
increasing the required alignment, which is need to support O_DIRECT on
devices with large block sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds SHDC support (-sd sd.img, where sd.img is
larger than 1GB) to qemu.
Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eliminate "mmc0: SD card claims to support the incompletely defined 'low voltage
range'. This will be ignored." warning. Qemu says the card is a SD card, and SD
spec doesn't define low-voltage cards, so do now pretend to be one.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6772 c046a42c-6fe2-441c-8c8c-71466251a162
Add the OMAP242x (arm1136 core) initialisation with basic on-chip
peripherals and update OMAP1 peripherals which are re-used in OMAP2.
Make palmte.c and sd.c errors go to stderr.
Allow disabling SD chipselect.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4213 c046a42c-6fe2-441c-8c8c-71466251a162
Remove bogus setting of bits 63 of R2 type responses.
Make some constants static to allow definitions by the same name for SDIO.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3850 c046a42c-6fe2-441c-8c8c-71466251a162
Don't error out on reading GPCR register, just warn (Thorsten Zitterell).
Don't zero a memory that's already zeroed.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3676 c046a42c-6fe2-441c-8c8c-71466251a162
