Fixes warning:
CC sparc-bsd-user/exec.o
/src/qemu/exec.c: In function `page_check_range':
/src/qemu/exec.c:2375: warning: comparison is always true due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The page tracking code in exec.c is used by both userspace and system
emulation. Userspace emulation uses it to track virtual pages, and
system emulation to track ram pages. Introduce a new type to hold this
kind of address.
Signed-off-by: Paul Brook <paul@codesourcery.com>
The addr < end comparison prevents iterating over the last
page in the guest address space; an iteration based on
length avoids this problem.
At the same time, assert that the given address is in the
guest address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Define L1_MAP_ADDR_SPACE_BITS to be either the virtual address size
(in user mode) or physical address size (in system mode), and use
that to size l1_map. This rewrites page_find_alloc, page_flush_tb,
and walk_memory_regions.
Use TARGET_PHYS_ADDR_SPACE_BITS for the physical memory map based
off of l1_phys_map. This rewrites page_phys_find_alloc and
phys_page_for_each.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Port qemu-kvm's -mem-path and -mem-prealloc options. These are useful
for backing guest memory with huge pages via hugetlbfs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: john cooper <john.cooper@redhat.com>
Userspace doesn't have physical memory, so cpu_physical_memory_rw
makes no sense. This is only used to implement cpu_memory_rw_debug, so
just implement that directly instead.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Userspace emulation doesn't have a physical address space, so
l1_phys_map makes no sense. This code is never actually used, so don't
try and build it.
Signed-off-by: Paul Brook <paul@codesourcery.com>
remove direct kvm calls from exec.c, make
kvm use memory notifiers framework instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds notifiers for phys memory changes: a set of callbacks that
vhost can register and update kernel accordingly. Down the road, kvm
code can be switched to use these as well, instead of calling kvm code
directly from exec.c as is done now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Qemu may hang in host_signal_handler after qemu has done a
seppuku with cpu_abort(). But at this stage we are not really
interested in target process coredump anymore, so unregister
host_signal_handler to die grafefully.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
The default action of coalesced MMIO is, cache the writing in buffer, until:
1. The buffer is full.
2. Or the exit to QEmu due to other reasons.
But this would result in a very late writing in some condition.
1. The each time write to MMIO content is small.
2. The writing interval is big.
3. No need for input or accessing other devices frequently.
This issue was observed in a experimental embbed system. The test image
simply print "test" every 1 seconds. The output in QEmu meets expectation,
but the output in KVM is delayed for seconds.
Per Avi's suggestion, I hooked flushing coalesced MMIO buffer in VGA update
handler. By this way, We don't need vcpu explicit exit to QEmu to
handle this issue.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Win32 suffers from a very big memory leak when dealing with SCSI devices.
Each read/write request allocates memory with qemu_memalign (ie
VirtualAlloc) but frees it with qemu_free (ie free).
Pair all qemu_memalign() calls with qemu_vfree() to prevent such leaks.
Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes receiving signals when guest code is being executed in a tight
loop. For an example, try interrupting the following code with ctrl-c.
http://nchipin.kos.to/test-loop.c
The tight loop is ofcourse brainless, but it is also exactly how the waitpid* testcases
are implemented.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The limit of iomem areas is quite low. Without the
debug print, it is quite hard to figure out why more
devices are not getting registered.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
/tmp doesn't exist under win32. Ease the pain of win32 development slightly.
From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
KVM on S390x requires the virtual address space of the guest's RAM to be
within the first 256GB.
The general direction I'd like to see KVM on S390 move is that this requirement
is losened, but for now that's what we're stuck with.
So let's just hack up qemu_ram_alloc until KVM behaves nicely :-).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Call MADV_MERGEABLE on guest memory allocations. MADV_MERGABLE will be
available starting in Linux 2.6.32. This system call registers a region of
virtual address space with Linux as a candidate for transparent memory
sharing.
Patchworks-ID: 35447
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't require full pages in cpu_register_physical_memory,
except for RAM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Win32 the setvbuf function requires the last parameter to be size between 2 and INT_MAX bytes, so the calls always failed. Since the whole point of the calls is to set line-buffered mode for the file handle and that's not supported on Win32 anyway, conditionally remove them.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use static empty variable s_cputlb_empty_entry to clear entries,
also reset addend member when clearing entries.
This helps running with valgrind/memcheck
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
fix memory leak in cpu_unregister_map_client() and cpu_notify_map_clients().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Maximum alignment for Win32 is 16, so don't try
to set it to 32. Otherwise the compiler complains:
exec.c:102: warning: alignment of 'code_gen_prologue'
is greater than maximum object file alignment. Using 16
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
remove unnecessary #if NB_MMU_MODES by using loop.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are some people interested in, given a cpu number,
pick its CPUState. KVM is an example, although not yet in tree.
This patch provides a way of doing that.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move io_mem_init() downwards to avoid a forward declaration. No code change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
