Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.
Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.
Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.
* for SPAPR it will be a spapr core type and for ARM/s390x/x86
a respective descendant of CPUClass.
Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently the only vNVDIMM backend can guarantee the guest write
persistence is device DAX on Linux, because no host-side kernel cache
is involved in the guest access to it. The approach to detect whether
the backend is device DAX needs to access sysfs, which may not work
with SELinux.
Instead, we add the 'unarmed' option to device 'nvdimm', so that users
or management utils, which have enough knowledge about the backend,
can control the unarmed flag in guest ACPI NFIT via this option. The
guest Linux NVDIMM driver, for example, will mark the corresponding
vNVDIMM device read-only if the unarmed flag in guest NFIT is set.
The default value of 'unarmed' option is 'off' in order to keep the
backwards compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These are crashes / errors which have been fixed already in the past
months. We can remove these from the device-crash-test script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513613438-11017-1-git-send-email-thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The qdev_unplug() function contains a g_assert(hotplug_ctrl) statement,
so QEMU crashes when the user tries to device_add + device_del a device
that does not have a corresponding hotplug controller. This could be
provoked for a couple of devices in the past (see commit 4c93950659
or 84ebd3e8c7 for example), and can currently for example also be
triggered like this:
$ s390x-softmmu/qemu-system-s390x -M none -nographic
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) device_add qemu-s390x-cpu,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
So devices clearly need a hotplug controller when they should be usable
with device_add.
The code in qdev_device_add() already checks whether the bus has a proper
hotplug controller, but for devices that do not have a corresponding bus,
there is no appropriate check available yet. In that case we should check
whether the machine itself provides a suitable hotplug controller and
refuse to plug the device if none is available.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1509617407-21191-3-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of doing the clean-ups on errors multiple times, introduce
a jump label at the end of the function that can be used by all
error paths that need this cleanup.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1509617407-21191-2-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The only user-creatable sysbus devices in qemu-system-x86_64 are
amd-iommu, intel-iommu, and xen-backend. xen-backend is handled
by xen_set_dynamic_sysbus(), so we only need to add amd-iommu and
intel-iommu.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-7-ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no need to make the machine allow every possible sysbus
device. We can now just add xen-sysdev to the allowed list.
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-6-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
TYPE_SPAPR_PCI_HOST_BRIDGE is the only dynamic sysbus device not
rejected by ppc_spapr_reset(), so it can be the only entry on the
allowed list.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-5-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
platform_bus_create_devtree() already rejects all dynamic sysbus
devices except TYPE_ETSEC_COMMON, so register it as the only
allowed dynamic sysbus device for the ppce500 machine-type.
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-4-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Replace the TYPE_SYS_BUS_DEVICE entry in the allowed sysbus
device list with the two device types that are really supported
by the virt machine: vfio-amd-xgbe and vfio-calxeda-xgmac.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The existing has_dynamic_sysbus flag makes the machine accept
every user-creatable sysbus device type on the command-line.
Replace it with a list of allowed device types, so machines can
easily accept some sysbus devices while rejecting others.
To keep exactly the same behavior as before, the existing
has_dynamic_sysbus=true assignments are replaced with a
TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches
will replace the TYPE_SYS_BUS_DEVICE entries with more specific
lists of devices.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-2-ehabkost@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a function to only create a memfd, without mmap. The function is
used in the following memory backend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171023141815.17709-2-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A bunch of fixes, cleanus and new features all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaYQZfAAoJECgfDbjSjVRpnwsIAKwqHUL3TaijtxrHhrVc4vCJ
vkEuO09ZTT5qSvZpqyZjLZ+lTC8MpXIZAbC66PLtYLObGTEq88943BFjmscrjcwt
gCX3hvcurbulLbyWrIxLSwiPZ4tjzp1ZHRIoxB83wCQ4ipGN5A76n78asY69nuwP
EDmqzQVDm83FSEkE8uwkO/6Ft5l4z/zUHT6b6Hx5J6JpRkHNNDJSz4QHppPYmaNH
5tsYECg2ztYryedd45Toh53q21fjz8oK5bSoO02Cfm+dbf3kGtIeZF8eLprqVGxZ
s8TWUfdXwHLJhqiYTDZZ0glaatZhT0yvedgO0CR1ABco4iEIcZX61Z5mzBVvLOI=
=B+bl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: features, fixes, cleanups
A bunch of fixes, cleanus and new features all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Jan 2018 20:41:03 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (29 commits)
vhost: remove assertion to prevent crash
vhost-user: fix misaligned access to payload
vhost-user: factor out msg head and payload
tests: acpi: add comments to fetch_rsdt_referenced_tables/data->tables usage
tests: acpi: rename test_acpi_tables()/test_dst_table() to reflect its usage
tests: acpi: init table descriptor in test_dst_table()
tests: acpi: move tested tables array allocation outside of test_acpi_dsdt_table()
x86_iommu: check if machine has PCI bus
x86_iommu: Move machine check to x86_iommu_realize()
vhost-user-test: use init_virtio_dev in multiqueue test
vhost-user-test: make features mask an init_virtio_dev() argument
vhost-user-test: setup virtqueues in all tests
vhost-user-test: extract read-guest-mem test from main loop
vhost-user-test: fix features mask
hw/acpi-build: Make next_base easy to follow
ACPI/unit-test: Add a testcase for RAM allocation in numa node
hw/pci-bridge: fix QEMU crash because of pcie-root-port
intel-iommu: Extend address width to 48 bits
intel-iommu: Redefine macros to enable supporting 48 bit address width
vhost-user: fix multiple queue specification
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU will assert on vhost-user backed virtio device hotplug if QEMU is
using more RAM regions than VHOST_MEMORY_MAX_NREGIONS (for example if
it were started with a lot of DIMM devices).
Fix it by returning error instead of asserting and let callers of
vhost_set_mem_table() handle error condition gracefully.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently take a pointer to a misaligned field of a packed structure.
clang reports this as a build warning.
A fix is to keep payload in a separate structure, and access is it
from there using a vectored write.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Main purpose of test_dst_table() is loading a table from QEMU
with checking that checksum in header matches actual one,
rename it reflect main action it performs.
Likewise test_acpi_tables() name is to broad, while the function
only loads tables referenced by RSDT, rename it to reflect it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
remove code duplication and make sure that table descriptor
passed in for initialization is in expected state.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
at best it's confusing that array for list of tables to be tested
against reference tables is allocated within test_acpi_dsdt_table()
and at worst it would just overwrite list of tables if they were
added before test_acpi_dsdt_table().
Move array initialization to test_acpi_one() before we start
processing tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Starting qemu with
qemu-system-x86_64 -S -M isapc -device {amd|intel}-iommu
leads to a segfault. The code assume PCI bus is present and
tries to access the bus structure without checking.
Since Intel VT-d and AMDVI should only work with PCI, add a
check for PCI bus and return error if not present.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Instead of having the same error checks in vtd_realize()
and amdvi_realize(), move that over to the generic
x86_iommu_realize().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that init_virtio_dev() has been generalized to all cases,
use it in test_multiqueue() to avoid code duplication.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The goal is to generalize the use of [un]init_virtio_dev() to
all tests, which does not necessarily expose the same features
set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Only the multiqueue test setups the virtqueues.
This patch generalizes the setup of virtqueues for all tests.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch makes read-guest-test consistent with other tests,
i.e. create the test server in the test function.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_NET_F_MAC is a bit position, not a bit mask.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
It may be hard to read the assignment statement of "next_base", so
S/next_base += (1ULL << 32) - pcms->below_4g_mem_size;
/next_base = mem_base + mem_len;
... for readability.
No functionality change.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As QEMU supports the memory-less node, it is possible that there is
no RAM in the first numa node(also be called as node0). eg:
... \
-m 128,slots=3,maxmem=1G \
-numa node -numa node,mem=128M \
But, this makes it hard for QEMU to build a known-to-work ACPI SRAT
table. Only fixing it is not enough.
Add a testcase for this situation to make sure the ACPI table is
correct for guest.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we try to use more pcie_root_ports then available slots
and an IO hint is passed to the port, QEMU crashes because
we try to init the "IO hint" capability even if the device
is not created.
Fix it by checking for error before adding the capability,
so QEMU can fail gracefully.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current implementation of Intel IOMMU code only supports 39 bits
iova address width. This patch provides a new parameter (x-aw-bits)
for intel-iommu to extend its address width to 48 bits but keeping the
default the same (39 bits). The reason for not changing the default
is to avoid potential compatibility problems with live migration of
intel-iommu enabled QEMU guest. The only valid values for 'x-aw-bits'
parameter are 39 and 48.
After enabling larger address width (48), we should be able to map
larger iova addresses in the guest. For example, a QEMU guest that
is configured with large memory ( >=1TB ). To check whether 48 bits
aw is enabled, we can grep in the guest dmesg output with line:
"DMAR: Host address width 48".
Signed-off-by: Prasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current implementation of Intel IOMMU code only supports 39 bits
host/iova address width so number of macros use hard coded values based
on that. This patch is to redefine them so they can be used with
variable address widths. This patch doesn't add any new functionality
but enables adding support for 48 bit address width.
Signed-off-by: Prasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The number of queues supported by the slave is queried with
message VHOST_USER_GET_QUEUE_NUM, not with message
VHOST_USER_GET_PROTOCOL_FEATURES.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function should be declared in generic header file so we can
utilize it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu <siliu@redhat.com>
Reported-by: Xiaoling Gao <xiagao@redhat.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the EventNotifier's cleanup callback function to execute the
event_notifier_cleanup function after kvm unregistered the eventfd.
This change supports running the virtio_bus_set_host_notifier
function inside a memory region transaction. Otherwise, a closed
fd is sent to kvm, which results in a failure.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adding a cleanup callback function to the EventNotifier struct
which allows users to execute event_notifier_cleanup in a
different context.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages in
libvhost-user library, users can implement their own I/O target
based on the library. This enable the virtio config space delivered
between QEMU host device and the I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be
used for live migration of vhost user devices, also vhost user devices
can benefit from the messages to get/set virtio config space from/to the
I/O target. For the purpose to support virtio config space change,
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier
in case virtio config space change in the slave I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Highlight: new CPU models that expose CPU features that guests
can use to mitigate CVE-2017-5715 (Spectre variant #2).
-----BEGIN PGP SIGNATURE-----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=GtpX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 queue, 2018-01-17
Highlight: new CPU models that expose CPU features that guests
can use to mitigate CVE-2017-5715 (Spectre variant #2).
# gpg: Signature made Thu 18 Jan 2018 02:00:03 GMT
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
i386: Add EPYC-IBPB CPU model
i386: Add new -IBRS versions of Intel CPU models
i386: Add FEAT_8000_0008_EBX CPUID feature word
i386: Add spec-ctrl CPUID bit
i386: Add support for SPEC_CTRL MSR
i386: Change X86CPUDefinition::model_id to const char*
target/i386: add clflushopt to "Skylake-Server" cpu model
pc: add 2.12 machine types
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
