Commit Graph

377 Commits

Author SHA1 Message Date
Cornelia Huck 7b18aad543 s390: Add channel I/O instructions.
Provide handlers for (most) channel I/O instructions.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29 21:50:04 +01:00
Paolo Bonzini 884fea4e87 mirror: support arbitrarily-sized iterations
Yet another optimization is to extend the mirroring iteration to include more
adjacent dirty blocks.  This limits the number of I/O operations and makes
mirroring efficient even with a small granularity.  Most of the infrastructure
is already in place; we only need to put a loop around the computation of
the origin and sector count of the iteration.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:35 +01:00
Paolo Bonzini 402a47411b mirror: support more than one in-flight AIO operation
With AIO support in place, we can start copying more than one chunk
in parallel.  This patch introduces the required infrastructure for
this: the buffer is split into multiple granularity-sized chunks,
and there is a free list to access them.

Because of copy-on-write, a single operation may already require
multiple chunks to be available on the free list.

In addition, two different iterations on the HBitmap may want to
copy the same cluster.  We avoid this by keeping a bitmap of in-flight
I/O operations, and blocking until the previous iteration completes.
This should be a pretty rare occurrence, though; as long as there is
no overlap the next iteration can start before the previous one finishes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:35 +01:00
Paolo Bonzini bd48bde8f0 mirror: switch mirror_iteration to AIO
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target.  However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:34 +01:00
Paolo Bonzini b812f6719c mirror: perform COW if the cluster size is bigger than the granularity
When mirroring runs, the backing files for the target may not yet be
ready.  However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros.  Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying).  So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.

However, we want to lower the granularity for efficiency, so we need
a better solution.  The solution is to always copy a whole cluster the
first time it is touched.  The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini 8f0720ecbc block: implement dirty bitmap using HBitmap
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.

Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini e7c033c3fa add hierarchical bitmap data type and test cases
HBitmaps provides an array of bits.  The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.

In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level.  When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).

Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):

     bits 0-57 => word in the last bitmap     | bits 58-63 => bit in the word
     bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
     bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word

So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits.  To move down, you shift the index left
similarly, and add the word index within the group.  Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.

Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.

When iterating on a bitmap, each bit (on any level) is only visited
once.  Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps.  Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:32 +01:00
Alon Levy e0ac6097b6 qxl: stop using non revision 4 rom fields for revision < 4
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-22 11:01:06 +01:00
Markus Armbruster 089da572b9 fw_cfg: Use void *, size_t instead of uint8_t *, uint32_t for blobs
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB.  Clean it
up anyway.  Size overflow now fails assertions.

Bonus: saves a whole bunch of silly casts.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-19 10:22:44 +00:00
Markus Armbruster f6e3534327 fw_cfg: Replace debug prints by tracepoints
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-19 10:22:39 +00:00
Andreas Färber 63e3555e80 Merge branch 'master' of git://git.qemu.org/qemu into prep-up
Conflicts:
	hw/Makefile.objs
	hw/ppc_prep.c

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-10 21:52:28 +01:00
Gerd Hoffmann 89eb147c2c uhci: stop using portio lists
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-08 10:56:58 +01:00
Stefan Hajnoczi e72f66a0a2 dataplane: add virtio-blk data plane code
virtio-blk-data-plane is a subset implementation of virtio-blk.  It only
handles read, write, and flush requests.  It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.

This approach performs very well but can be used for raw image files
only.  The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.

Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:47 +01:00
Stefan Hajnoczi 88807f89d9 dataplane: add virtqueue vring code
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.

This patch introduces a virtqueue module based on the kernel's vhost
vring code.  The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.

Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:55:47 +01:00
Marc-André Lureau 5a49d3e9a7 spice-qemu-char: add spiceport chardev
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.

Examples:

This allows the Spice client to have a special port for the qemu
monitor:

... -chardev spiceport,name=org.qemu.monitor,id=monitorport
    -mon chardev=monitorport

v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17 14:01:41 +01:00
David Gibson 500efa2319 pseries: Add tracepoints to the XICS interrupt controller
This patch adds tracing / debugging calls to the XICS interrupt controller
implementation used on the pseries machine.

Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14 13:12:54 +01:00
Gerd Hoffmann 8c908fca58 usb-host: update tracing
Now that we have separate status and length fields in USBPacket
update the completion tracepoint to log both.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16 11:27:32 +01:00
Gerd Hoffmann 55903f1d2d ehci: handle dma errors
Starting with commit 1c380f9460 dma
transfers can actually fail.  This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer.  Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.

This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16 11:27:32 +01:00
Alon Levy 511aefb0c6 hw/qxl: qxl_send_events: nop if stopped
Added a trace point for easy logging.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=870972

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-05 11:49:22 +01:00
Anthony Liguori de0a36cd01 Merge remote-tracking branch 'kraxel/usb.69' into staging
* kraxel/usb.69: (31 commits)
  usb-redir: Allow redirecting super speed devices to high speed controllers
  usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
  usb-redir: Use reject rather the disconnect on bad ep info
  usb-redir: Add an usbredir_setup_usb_eps() helper function
  usb-redir: Add support for input pipelining
  usb-redir: Add support for 32 bits bulk packet length
  combined-packet: Add a workaround for Linux usbfs + live migration
  usb: Add packet combining functions
  uhci: Don't crash on device disconnect
  uhci: Add a uhci_handle_td_error() helper function
  usb/ehci-pci: add helper to create ich9 usb controllers
  usb/ehci-pci: add ich9 00:1a.* variant
  usb/ehci-pci: dynamic type generation
  uhci: add ich9 00:1a.* variants
  uhci: stick irq routing info into UHCIInfo too.
  uhci: dynamic type generation
  xilinx_zynq: add USB controllers
  usb/ehci: add sysbus variant
  usb/ehci: split into multiple source files
  usb/ehci: Guard definition of EHCI_DEBUG
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-01 14:34:13 -05:00
Gerd Hoffmann 4f47f0f82e xhci: add port trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01 13:10:09 +01:00
Paolo Bonzini f563a5d7a8 Merge remote-tracking branch 'origin/master' into threadpool
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31 10:42:51 +01:00
Paolo Bonzini d354c7eccf aio: add generic thread-pool facility
Add a generic thread-pool.  The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:

- use QemuSemaphore instead of QemuCond;

- separate the state of the thread from the return code of the worker
function.  The return code is totally opaque for the thread pool;

- do not busy wait when doing cancellation.

A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31 10:37:48 +01:00
Anthony Liguori 6b0e6468e3 Merge remote-tracking branch 'kraxel/usb.68' into staging
* kraxel/usb.68: (36 commits)
  xhci: fix usb name in caps
  xhci: make number of interrupters and slots configurable
  xhci: allow disabling interrupters
  xhci: flush endpoint context unconditinally
  xhci: fix function name in error message
  uhci: Use only one queue for ctrl endpoints
  uhci: Retry to fill the queue while waiting for td completion
  uhci: Always mark a queue valid when we encounter it
  uhci: When the guest marks a pending td non-active, cancel the queue
  uhci: Detect guest td re-use
  uhci: Verify queue has not been changed by guest
  uhci: Immediately free queues on device disconnect
  uhci: Store ep in UHCIQueue
  uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
  uhci: Add uhci_read_td() helper function
  uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
  uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
  uhci: Drop unnecessary forward declaration of some static functions
  uhci: Don't retry on error
  uhci: cleanup: Add an unlink call to uhci_async_cancel()
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-29 10:34:29 -05:00
Hans de Goede 66a08cbe6a uhci: Verify queue has not been changed by guest
According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25 09:08:11 +02:00
Paolo Bonzini 893f7ebafe mirror: introduce mirror job
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background.  This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program.  It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.

The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.

The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.

In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source.  (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).

It is not yet possible to complete the job and switch over to the target
disk.  The next patches will fix this and add many refinements to the
basic idea introduced here.  These include improved error management,
some tunable knobs and performance optimizations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini aeae883baf block: add block-job-complete
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Juan Quintela 3c12193d99 ram: create trace event for migration sync bitmap
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:58 +02:00
Paolo Bonzini 6e37fb811a qmp: add block-job-pause and block-job-resume
Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:32 +02:00
Jeff Cody 9abf2dbaf6 blockdev: rename block_stream_cb to a generic block_job_cb
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:23:16 +02:00
Jeff Cody 747ff60263 block: add live block commit functionality
This adds the live commit coroutine.  This iteration focuses on the
commit only below the active layer, and not the active layer itself.

The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base.  At the end, intermediate images are deleted, and the
chain stitched together.  Images are restored to their original open
flags upon completion.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:23:12 +02:00
Aurelien Jarno cfb75cb980 Merge branch 'usb.65' of git://git.kraxel.org/qemu
* 'usb.65' of git://git.kraxel.org/qemu:
  uhci: Don't queue up packets after one with the SPD flag set
  usb-redir: Revert usb-redir part of commit 93bfef4c
  usb-redir: Add chardev open / close debug logging
  usb-redir: Add support for migration
  usb-redir: Store max_packet_size in endp_data
  usb-redir: Add an already_in_flight packet-id queue
  usb-redir: Change cancelled packet code into a generic packet-id queue
  ehci: Walk async schedule before and after migration
  ehci: Don't set seen to 0 when removing unseen queue-heads
  configure: usbredir fixes
  ehci: Don't process too much frames in 1 timer tick (v2)
  ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
  ehci: switch to new-style memory ops
  usb-host: allow emulated (non-async) control requests without USBPacket
2012-09-21 19:53:26 +02:00
Alon Levy a639ab0482 hw/qxl: support client monitor configuration via device
Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.

Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.

The maximal number of monitors is limited on the QXLRom to 64.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:31 +02:00
Alon Levy 1a1bc08568 qxl: add trace-event for QXL_IO_LOG
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:30 +02:00
Alon Levy 917ae08ca1 hw/qxl: tracing fixes
Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"

Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.

Change d to qxl in one place.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-13 07:31:30 +02:00
Gerd Hoffmann 3e4f910c8d ehci: switch to new-style memory ops
Also register different memory regions for capabilities,
operational registers and port status registers.  Create
separate tracepoints for operational regs and port status
regs.  Ditch a bunch of sanity checks because the memory
core will do this for us now.

Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-12 08:09:49 +02:00
Gerd Hoffmann 962d11e172 xhci: add XHCIInterrupter
Move all state belonging to the (single) interrupter into a separate
struct.  First step in adding support for multiple interrupters.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:02 +02:00
Gerd Hoffmann 4c47f80063 xhci: add msix support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:02 +02:00
Gerd Hoffmann 2077469b58 usb3: bos decriptor
Add support for creating BOS descriptor and
device cappability descriptors.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann d829fde97d xhci: add trace_usb_xhci_ep_set_dequeue
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann 873123fe09 xhci: trace cc codes in cleartext
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann d5a15814b4 xhci: drop buffering
This patch splits the xhci_xfer_data function into three.
The xhci_xfer_data function used to do does two things:

  (1) copy transfer data between guest memory and a temporary buffer.
  (2) report transfer results to the guest using events.

Now we three functions to handle this:

  (1) xhci_xfer_map creates a scatter list for the transfer and
      uses that (instead of the temporary buffer) to build a
      USBPacket.
  (2) xhci_xfer_unmap undoes the mapping.
  (3) xhci_xfer_report sends out events.

The patch also fixes reporting of transaction errors which must be
reported unconditinally, not only in case the guest asks for it
using the ISP flag.

[ v2: fix warning ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:43:01 +02:00
Gerd Hoffmann 1defcbd1e8 ehci: add doorbell trace events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:42:59 +02:00
Gerd Hoffmann 5c514681ab ehci: trace guest bugs
make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any.  Add tracepoint to log this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11 07:42:59 +02:00
Alon Levy 020af1c45f qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.

[ kraxel: 3 continues to be the default revision.  Once we have a new
          stable spice-server release and the qemu patches to enable
          the new bits merged we'll go flip the switch and make rev4
          the default ]

This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.

On migration reissue spice_qxl_monitors_config_async.

RHBZ: 770842

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

fixup

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05 17:11:55 +02:00
Hervé Poussineau 1ae41f447d prep: Add pc87312 Super I/O emulation
This provides floppy and IDE controllers as well as serial and parallel
ports. However, dynamic configuration of devices is not yet supported.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: QOM'ify, split out header, create CharDriverState if absent]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-15 22:10:58 +02:00
Alexey Kardashevskiy 0ee2c058a3 pseries: Add PCI MSI/MSI-X support
This patch implements MSI and MSI-X support for the pseries PCI host
bridge.  To do this it adds:

 * A "config_space_address to msi_table" map, since the MSI RTAS calls
take a PCI config space address as an identifier.

 * A MSIX memory region to catch msi_notify()/msix_notiry() from
virtio-pci and pass them to the guest via qemu_irq_pulse().

 * RTAS call "ibm,change-msi" which sets up MSI vectors for a
device. Note that this call may configure and return lesser number of
vectors than requested.

 * RTAS call "ibm,query-interrupt-source-number" which translates MSI
vector to interrupt controller (XICS) IRQ number.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix error case ndev < 0]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:16 +02:00
Alexey Kardashevskiy a2950fb6e7 pseries: Add trace event for PCI irqs
This adds a trace event in the pseries PCI specific set_irq() function to
assist in debugging.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: add trace.h include]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:16 +02:00
Paolo Bonzini e48e84ea80 scsi: establish precedence levels for unit attention
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED.  However, we should ensure that this
condition does not override a more important unit attention condition.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-27 08:25:25 +02:00
Paolo Bonzini 814589c450 scsi: add tracepoint for scsi_req_cancel
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-27 08:25:24 +02:00
Hannes Reinecke 10d6530c64 megasas: Replace trace_megasas_dcmd_dump_frame()
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it.  As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-26 17:44:07 +02:00
Anthony Liguori dfe1ce5d80 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (41 commits)
  fdc-test: Clean up a bit
  fdc-test: introduce test_relative_seek
  fdc: fix relative seek
  qemu-iotests: Valgrind support
  coroutine-ucontext: Help valgrind understand coroutines
  qemu-io: Fix memory leaks
  hw/block-common: Factor out fall back to legacy -drive cyls=...
  blockdev: Don't limit DriveInfo serial to 20 characters
  hw/block-common: Factor out fall back to legacy -drive serial=...
  hw/block-common: Move BlockConf & friends from block.h
  Relax IDE CHS limits from 16383,16,63 to 65535,16,255
  blockdev: Drop redundant CHS validation for if=ide
  hd-geometry: Compute BIOS CHS translation in one place
  qtest: Test we don't put hard disk info into CMOS for a CD-ROM
  ide pc: Put hard disk info into CMOS only for hard disks
  block: Geometry and translation hints are now useless, purge them
  qtest: Cover qdev property for BIOS CHS translation
  ide: qdev property for BIOS CHS translation
  qdev: New property type chs-translation
  qdev: Collect private helpers in one place
  ...
2012-07-18 14:44:50 -05:00
Anthony Liguori 83199ca43c Merge remote-tracking branch 'kraxel/usb.57' into staging
* kraxel/usb.57:
  ehci: improve expire time calculation
  ehci: implement Interrupt Threshold Control support
  ehci: raise irq in the frame timer
  uhci: initialize expire_time when loading v1 vmstate
  usb: add usb attached scsi emulation
  scsi: add free_request callback
2012-07-18 14:44:27 -05:00
Markus Armbruster 1f24d7b47e hd-geometry: Switch to uint32_t to match BlockConf
Best to use the same type, to avoid unwanted truncation or sign
extension.

BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00
Markus Armbruster 31f7eedfa6 hd-geometry: Add tracepoints
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00
Hervé Poussineau fabaaf1d1f esp: add AMD PCscsi emulation (PCI SCSI adapter)
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:13:29 +00:00
Hervé Poussineau 3af4e9aa56 esp: use trace framework instead of stderr output
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:12:41 +00:00
Hervé Poussineau 6915bff1a8 esp: implement Reset ATN command
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:11:57 +00:00
Hervé Poussineau 6fe84c1835 esp: implement Disable selection command
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:11:49 +00:00
Gerd Hoffmann 7efc17af9a ehci: implement Interrupt Threshold Control support
Also reorganize and comment the irq functions while being at it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-07-12 15:00:50 +02:00
Gerd Hoffmann 0f58f68b58 usb: add usb attached scsi emulation
$subject says all.  First cut.

It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility.  If your guest can't handle it use usb-storage
instead.

The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...).  It provides just the HBA where you can attach scsi
devices as you like using '-device'.  A single scsi target with up to
256 luns is supported.

For now only usb 2.0 transport is supported.  This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.

No migration support yet.  I'm planning to add usb 3.0 support first as
this probably requires saving additional state.

Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-07-12 15:00:39 +02:00
Anthony Liguori 3f6e9a5fad Merge remote-tracking branch 'quintela/migration-anthony-v2' into staging
* quintela/migration-anthony-v2:
  Maintain the number of dirty pages
  dirty bitmap: abstract its use
  Exit loop if we have been there too long
  Only calculate expected_time for stage 2
  Only TCG needs TLB handling
  No need to iterate if we already are over the limit
  Add tracepoints for savevm section start/end
  Add spent time for migration
  Add migration_end function
  Add debugging infrastructure
  Add save_block_hdr function
  Add MigrationParams structure
  Add missing check for host_from_stream_offset return value for RAM_SAVE_FLAG_PAGE
2012-07-09 11:57:34 -05:00
Anthony Liguori fe0cb8ef84 Merge remote-tracking branch 'kraxel/usb.55' into staging
* kraxel/usb.55:
  usb-host: add trace events for iso xfers
  usb: fix interface initialization
  usb: split endpoint init and reset
  usb-redir: Correctly handle the usb_redir_babble usbredir status
  ehci: Kick async schedule on wakeup in the non companion case
  usb-ehci: Fix an assert whenever isoc transfers are used
  ehci: don't flush cache on doorbell rings.
  ehci: fix td writeback
  ehci: fix ehci_qh_do_overlay
2012-07-09 09:51:33 -05:00
Gerd Hoffmann c32da15188 usb-host: add trace events for iso xfers
Replace iso transfer fprintf's with trace points.  Also rename existing
tracepoints so they all match usb_host_iso_*.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-07-09 11:59:55 +02:00
Hannes Reinecke e8f943c3bc megasas: LSI Megaraid SAS HBA emulation
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.

Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
  and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-02 11:11:25 +02:00
Juan Quintela 517a13c91a Add tracepoints for savevm section start/end
This allows to know how long each section takes to save.

An awk script like this tells us sections that takes more that 10ms

$1 ~ /savevm_state_iterate_end/ {
	/* Print savevm_section_end line when > 10ms duration */
	if ($2 > 10000) {
		printf("%s times_missing=%u\n", $0, times_missing++);
	}
}

Signed-off-by: Juan Quintela <quintela@redhat.com>

fix ws tracepoints

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29 13:27:28 +02:00
Gerd Hoffmann 30e9d4120f ehci: tracing improvements
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-20 14:46:02 +02:00
Daniel P. Berrange afeecec2e8 Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
Allow certain event types to be rate limited to avoid flooding
monitor clients. The monitor_protocol_event() method is changed
such that instead of immediately emitting the event to Monitor
instances, it will call a new monitor_protocol_event_queue()
method.

This will check to see if the rate limit for the event has been
exceeded, and if so schedule a timer to wakeup at the end of the
rate limit period. If further events arrive before the timer fires,
the previously queued event will be discarded in favour of the new
event. The event will eventually be emitted when the timer fires.

This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG
events, since the data associated with these events is stateless

 * monitor.c: Add support for rate limiting
 * monitor.h: Define monitor_global_init for one-time setup tasks
 * vl.c: Invoke monitor_global_init
 * trace-events: Add hooks for monitor event tracing

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-15 13:35:00 -03:00
Gerd Hoffmann eb36a88e6b ehci: add EHCIPacket
Add a separate EHCIPacket struct and move fields over from EHCIQueue.
Preparing for supporting multiple packets per queue being in flight at
the same time.  No functional changes yet.

Fix some codestyle issues along the way.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:22 +02:00
Gerd Hoffmann 348f10374a xhci: trace: slots
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:22 +02:00
Gerd Hoffmann 97df650bb9 xhci: trace: transfers
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:22 +02:00
Gerd Hoffmann c1f6b49326 xhci: trace: endpoints
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:22 +02:00
Gerd Hoffmann 0703a4a7a6 xhci: trace: ring fetch
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:22 +02:00
Gerd Hoffmann 7acd279f83 xhci: trace: irq + events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:21 +02:00
Gerd Hoffmann fc0ddaca33 xhci: trace: run+stop
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:21 +02:00
Gerd Hoffmann 2d754a10e4 xhci: trace: mmio reads+writes
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:21 +02:00
Gerd Hoffmann 7dd0dfd7f7 uhci: fix trace format strings
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:20 +02:00
Gerd Hoffmann 4aed20e2d7 uhci: fix bandwidth management
uhci_process_frame() can be invoked multiple times per frame, so
accounting usb bandwith in a local variable doesn't fly, use a variable
in UHCIState instead.  Also check the limit more frequently.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07 10:02:20 +02:00
Ronnie Sahlberg f4dfa67f04 ISCSI: Switch to using READ16/WRITE16 for I/O to the LUN
This allows using LUNs bigger than 2TB.  Keep using READ10 for other
device types such as MMC.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28 14:04:16 +02:00
Anthony Liguori 25b9e14e78 Merge remote-tracking branch 'spice/spice.v52' into staging
* spice/spice.v52:
  qxl-render: fix broken vnc+spice since commit f934493
  qxl: set default values of vram*_size_mb to -1
  trace-events: remove unused qxl_vga_ioport_while_not_in_vga_mode
2012-04-18 07:56:18 -05:00
Alon Levy a9257af0b9 trace-events: remove unused qxl_vga_ioport_while_not_in_vga_mode
The resulting stp file fails to load because of an unresolvable probe.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-18 12:21:45 +02:00
Gerd Hoffmann 96dd9aac37 usb-host: rewrite usb_linux_update_endp_table
This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:

 * We are using the USBDescriptor struct instead of hard-coded offsets
   now to access descriptor data.
 * (debug) printfs are all gone, tracepoints have been added instead.
 * We don't try (and fail) to skip over unneeded descriptors.  We parse
   them all one by one.  We keep track of which configuration, interface
   and altsetting we are looking at and use this information to figure
   which desciptors are in use and which we can ignore.
 * On parse errors we clear all endpoint information, which will
   disallow any communication with the device, except control endpoint
   messages.  This makes sure we don't end up with a silly device state
   where half of the endpoints got enabled and the other half was left
   disabled.
 * Some sanity checks have been added.

The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:28 +02:00
Gerd Hoffmann 529f8f9fa9 usb-hub: add tracepoints
Add tracepoints to the usb hub emulation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann 19b89252a3 usb-host: add usb packet to request tracepoints
Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann 6aebe40796 usb-host: trace canceled requests
Add tracepoints to track canceled requests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann e382e751ef usb-host: trace emulated requests
Add tracepoint to track completion of emulated control requests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Kevin Wolf bfe24e1a26 trace-events: Rename 'next' argument
'next' is a systemtap keyword, so it's a bad idea to use it as an
argument name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:39 +02:00
Stefan Weil 95b752bc32 trace-events: Fix broken build caused by wrong format specifier
mem is an uint64_t value, so %lx was wrong.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-26 12:34:20 +01:00
Alon Levy d53291cf59 qxl/qxl_render.c: add trace events
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19 13:12:19 +01:00
Alon Levy c480bb7da4 qxl: switch qxl.c to trace-events
dprint is still used for qxl_init_common one time prints.

also switched parts of spice-display.c over, mainly all the callbacks to
spice server.

All qxl device trace events start with the qxl device id.

Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19 13:12:19 +01:00
Gerd Hoffmann 50dcc0f85d uhci: tracing support
Zap DPRINTF, add tracepoints instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Gerd Hoffmann 5ac2731cf8 usb: improve packet state sanity checks
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Gerd Hoffmann f1ae32a1ec usb: the big rename
Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Anthony Liguori fb23ae6e41 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
  test-coroutine: add performance test for nesting
  coroutine: adding configure option for sigaltstack coroutine backend
  coroutine: adding configure choose mechanism for coroutine backend
  coroutine: adding sigaltstack method (.c source)
  qcow2: Reduce number of I/O requests
  qcow2: Add qcow2_alloc_clusters_at()
  qcow2: Factor out count_cow_clusters
  qmp: convert blockdev-snapshot-sync to a wrapper around transactions
  add mode field to blockdev-snapshot-sync transaction item
  rename blockdev-group-snapshot-sync
  qapi: complete implementation of unions
  use QSIMPLEQ_FOREACH_SAFE when freeing list elements
  Add 'make check-block'
  make check: Add qemu-iotests subset
  qemu-iotests: Mark some tests as quick
  qcow2: Add error messages in qcow2_truncate
  block: handle -EBUSY in bdrv_commit_all()
  qcow2: Add some tracing
  qed: do not evict in-use L2 table cache entries
  Group snapshot: Fix format name for backing file
2012-03-12 20:51:42 -05:00
Kevin Wolf 250196f19c qcow2: Reduce number of I/O requests
If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.

After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 15:14:07 +01:00
Kevin Wolf 3cce16f44d qcow2: Add some tracing
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 15:14:06 +01:00
Alon Levy 727500181a vga: add trace event for ppm_save
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 10:30:27 +00:00
Alon Levy cdbc19dd8d console: add some trace events
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 10:30:23 +00:00
Gerd Hoffmann 808aeb98ff usb: add tracepoint for usb packet state changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-27 13:37:36 +01:00
Hervé Poussineau 63b9932dd0 jazz-led: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22 09:02:19 -06:00
Stefan Hajnoczi 6e4f59bd0d qed: replace is_write with flags field
Per-request attributes like read/write are currently implemented as bool
fields in the QEDAIOCB struct.  This becomes unwiedly as the number of
attributes grows.  For example, the qed_aio_setup() function would have
to take multiple bool arguments and at call sites it would be hard to
distinguish the meaning of each bool.

Instead use a flags field with bitmask constants.  This will be used
when zero write support is added.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09 16:17:50 +01:00
Stefan Hajnoczi f08f2ddae0 block: add .bdrv_co_write_zeroes() interface
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.

Image formats may support an optimized metadata representation instead
of writing zeroes into the image file.  This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.

The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.

Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate.  That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09 16:17:50 +01:00
Fabien Chouteau 0c685d2827 GRLIB UART: Add RX channel
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-30 19:13:21 +00:00
Stefan Hajnoczi 81b6b9faef virtio-blk: add virtio_blk_handle_read trace event
There already exists a virtio_blk_handle_write trace event as well as
completion events.  Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 370521a1d6 qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 12bd451fe0 qmp: add block_stream command
Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:14 +01:00
Stefan Hajnoczi 4f1043b4ff block: add image streaming block job
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 11:45:26 +01:00
Stefan Hajnoczi 470c05047a block: make copy-on-read a per-request flag
Previously copy-on-read could only be enabled for all requests to a
block device.  This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.

For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image.  Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.

Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests.  Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 11:45:26 +01:00
Anthony Liguori 5b4448d27d Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
  kvm: Activate in-kernel irqchip support
  kvm: x86: Add user space part for in-kernel IOAPIC
  kvm: x86: Add user space part for in-kernel i8259
  kvm: x86: Add user space part for in-kernel APIC
  kvm: x86: Establish IRQ0 override control
  kvm: Introduce core services for in-kernel irqchip support
  memory: Introduce memory_region_init_reservation
  ioapic: Factor out base class for KVM reuse
  ioapic: Drop post-load irr initialization
  i8259: Factor out base class for KVM reuse
  i8259: Completely privatize PicState
  apic: Open-code timer save/restore
  apic: Factor out base class for KVM reuse
  apic: Introduce apic_report_irq_delivered
  apic: Inject external NMI events via LINT1
  apic: Stop timer on reset
  kvm: Move kvmclock into hw/kvm folder
  msi: Generalize msix_supported to msi_supported
  hyper-v: initialize Hyper-V CPUID leaves.
  hyper-v: introduce Hyper-V support infrastructure.

Conflicts:
	Makefile.target

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-23 11:00:26 -06:00
Jan Kiszka 343270ea87 apic: Introduce apic_report_irq_delivered
The in-kernel i8259 and IOAPIC backends for KVM will need this, so
encapsulate the shared bits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-19 12:14:40 +01:00
Gerd Hoffmann 1de14d43e2 usb: track altsetting in USBDevice
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-13 10:25:44 +01:00
Anthony Liguori f3c6a169a3 Merge remote-tracking branch 'qemu-kvm/memory/page_desc' into staging
* qemu-kvm/memory/page_desc: (22 commits)
  Remove cpu_get_physical_page_desc()
  sparc: avoid cpu_get_physical_page_desc()
  virtio-balloon: avoid cpu_get_physical_page_desc()
  vhost: avoid cpu_get_physical_page_desc()
  kvm: avoid cpu_get_physical_page_desc()
  memory: remove CPUPhysMemoryClient
  xen: convert to MemoryListener API
  memory: temporarily add memory_region_get_ram_addr()
  xen, vga: add API for registering the framebuffer
  vhost: convert to MemoryListener API
  kvm: convert to MemoryListener API
  kvm: switch kvm slots to use host virtual address instead of ram_addr_t
  memory: add API for observing updates to the physical memory map
  memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
  framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
  loader: remove calls to cpu_get_physical_page_desc()
  framebuffer: drop use of cpu_get_physical_page_desc()
  memory: introduce memory_region_find()
  memory: add memory_region_is_logging()
  memory: add memory_region_is_rom()
  ...
2012-01-03 14:39:05 -06:00
Avi Kivity 20581d2078 xen: convert to MemoryListener API
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03 19:19:22 +02:00
Aneesh Kumar K.V 2f008a8c97 hw/9pfs: Use the correct signed type for different variables
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-12-21 12:37:23 +05:30
Paolo Bonzini ad54ae80c7 block: bdrv_aio_* do not return NULL
Initially done with the following semantic patch:

@ rule1 @
expression E;
statement S;
@@
  E =
(
   bdrv_aio_readv
|  bdrv_aio_writev
|  bdrv_aio_flush
|  bdrv_aio_discard
|  bdrv_aio_ioctl
)
     (...);
(
- if (E == NULL) { ... }
|
- if (E)
    { <... S ...> }
)

which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15 12:40:07 +01:00
Kevin Wolf c57c465800 dma-helpers: Add trace events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi ab1859218a block: core copy-on-read logic
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Anthony Liguori 8494a397b6 Merge remote-tracking branch 'kwolf/for-anthony' into staging
Conflicts:
	block/vmdk.c
2011-10-31 11:09:00 -05:00
Aneesh Kumar K.V 7999f7e127 hw/9pfs: Make VirtFS tracing work correctly
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:05:28 +00:00
Paolo Bonzini e88c591d63 scsi: do not call transfer_data after canceling a request
Otherwise, if cancellation is "faked" by the AIO layer and goes
through qemu_aio_flush, the whole request is completed synchronously
during scsi_req_cancel.

Using the enqueued flag would work here, but not in the next patches,
so I'm introducing a new io_canceled flag.  That's because scsi_req_data
is a synchronous callback and the enqueued flag might be reset by the
time it returns.  scsi-disk cannot unref the request until after calling
scsi_req_data.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:52 +02:00
Ronnie Sahlberg c589b24972 iSCSI block driver
This provides built-in support for iSCSI to QEMU.

This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.

This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
    git://github.com/sahlberg/libiscsi.git

The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
  qemu against libiscsi.
* --enable-libiscsi
  Force a build against libiscsi. If libiscsi is not available
  the build will fail.
* --disable-libiscsi
  Do not link against libiscsi, even if it is available.

When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.

You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:48 +02:00
Blue Swirl 870be6ad57 Sparc: convert win_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:19:18 +00:00
Blue Swirl 11e66bca8a Sparc: convert interrupt helpers to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:58 +00:00
Blue Swirl ec0ceb1759 Sparc: convert mmu_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:57 +00:00
Paolo Bonzini 4265d620c5 block: add bdrv_co_discard and bdrv_aio_discard support
This similarly adds support for coroutine and asynchronous discard.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:13 +02:00
Stefan Weil c76eaf1397 hw/9pfs: Fix broken compilation caused by wrong trace events
Commit c572f23a3e added trace events
with mismatching format string and arguments.

gcc reports these errors:

In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]

Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.

v2: Fixed position of } for v9fs_mkdir_return.

Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20 15:30:59 -05:00
Anthony Liguori 1f99b94932 Merge remote-tracking branch 'aneesh/for-upstream-6' into staging
Conflicts:
	trace-events
2011-10-20 08:42:08 -05:00
Max Filippov 342407fd95 hw: add OpenCores 10/100 Mbps Ethernet controller
This is OpenCores Ethernet MAC + subset of National Semiconductors
DP83838C PHY.
OpenCores Ethernet MAC project: http://opencores.org/project,ethmac

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:42:20 +00:00
Harsh Prateek Bora c572f23a3e hw/9pfs: Introduce tracing for 9p pdu handlers
Plan is to replace the existing debug infrastructure with Qemu tracing
infrastructure so that user can dynamically enable/disable trace events and
therefore a meaningful trace log can be generated which can be further
filtered using an analysis script.

Note: Because of current simpletrace limitations, the trace events are
logging at max 6 args, however, once the more args are supported, we can
change trace events to log more info as well. Also, This initial patch only
provides a replacement for existing debug infra. More trace events to be
added later for newly added handlers and sub-routines.

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-15 15:30:27 +05:30
Blue Swirl 53e621704c Merge branch 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32
* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32:
  milkymist: new interrupt map
  milkymist_uart: support new core version
  lm32: add missing qemu_init_vcpu() call
2011-10-08 15:40:08 +00:00
Michael Walle fcfa339778 milkymist_uart: support new core version
The new version of the uart core introduces status and control bits.

Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-03 12:44:22 +02:00
Stefan Hajnoczi 59370aaa56 trace: add arguments to bdrv_co_io_em() trace event
It is useful to know the BlockDriverState as well as the
sector_num/nb_sectors of an emulated .bdrv_co_*() request.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03 10:56:27 +01:00
Stefan Hajnoczi 89bd820acb trace: trace monitor qmp dispatch/completion
Add trace events for handle_qmp_command(), which dispatches qmp
commands, and monitor_protocol_emitter(), which produces the reply to a
qmp command.

Also remove duplicate #include "trace/control.h".

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03 10:56:25 +01:00
Stefan Hajnoczi 28dcee10c5 trace: trace bdrv_open_common()
bdrv_open_common() is a useful point to trace since it reveals the
filename and block driver for a given BlockDriverState.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03 10:55:50 +01:00
Blue Swirl bf4b9889ab ESP: convert to trace framework
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01 09:28:40 +00:00
Paolo Bonzini 903ec8eae6 fix compilation with stderr trace backend
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21 10:49:02 +01:00
Stefan Hajnoczi 4e1837f855 trace: add virtio_set_status() trace event
The virtio device lifecycle can be observed by looking at the sequence
of set status operations.  This is especially important for catching the
reset operation (status value 0), which resets the device and all
virtqueues.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17 15:14:24 +00:00
Stefan Hajnoczi 689d7e2fad trace: remove trailing double quotes after PRI*64
Now that format strings can end in a PRI*64 macro, remove the
workarounds from the trace-events file.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17 15:14:20 +00:00
Stefan Hajnoczi 2f4a725b94 trace: remove newline from grlib_irqmp_check_irqs format string
There is no need to put a newline in trace event format strings.  The
backend may use the format string within some context and takes care of
how to display the event.  The stderr backend automatically appends "\n"
whereas the ust backend does not want a newline at all.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17 15:13:59 +00:00
Markus Armbruster 025e849a50 block: Rename bdrv_set_locked() to bdrv_lock_medium()
While there, make the locked parameter bool.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12 15:17:20 +02:00
Hervé Poussineau 83818f7cdd mipsnet: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:50:46 +00:00
Gerd Hoffmann 891fb2cd45 usb: claim port at device initialization time.
This patch makes qemu assign a port when creating the device, not when
attaching it.  For most usb devices this isn't a noticable difference
because they are in attached state all the time.

The change affects usb-host devices which live in detached state while
the real device is unplugged from the host.  They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.

The change also allows to simplify usb-hub.  It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now.  The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases.  For example it is not possible
any more to plug the hub into one of its own downstream ports.

The usb host adapters must care too.  USBPort->dev being non-NULL
doesn't imply any more the device is in attached state.  The host
adapters must additionally check the USBPort->dev->attached flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:58:26 +02:00
Gerd Hoffmann 2fe80192ba usb-ehci: handle siTDs
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer.  This is good enougth to handle the
inactive siTDs used by FreeBSD.  Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:58:16 +02:00
Gerd Hoffmann 9516bb4772 usb-host: claim port
When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port.  It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:58:12 +02:00
Gerd Hoffmann e6a2f50042 usb-host: start tracing support
Add a bunch of trace points to usb-linux.c  Drop a bunch of DPRINTK's in
favor of the trace points.  Also cleanup error reporting a bit while being
at it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:50:39 +02:00
Frediano Ziglio a74cd8cc37 rename qemu_malloc and related to glib names for coherence
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02 10:35:41 -05:00
Lluís 47f08d7a9d trace: enable all events
Given that all events with programmatically-controlled state are disabled by
default, we can delete the "disable" property from all events.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01 10:34:54 +01:00
Lluís 03727e6a06 trace: [simple] disable all trace points by default
Note that this refers to the backend-specific state (whether the output must be
generated), not the event "disabled" property (which always uses the "nop"
backend).

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01 10:34:54 +01:00
Hervé Poussineau b213b37072 g364fb: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-27 17:03:23 +00:00
Jan Kiszka 1f6f408c8c target-i386: Remove unused polarity arguments from APIC API
Polarity of external interrupts needs to be handled in the IOAPIC.
Passing it to the APIC is pointless. So remove all these arguments.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22 14:37:03 -05:00
Blue Swirl 30c2f2388a escc: replace DPRINTFs with tracepoints
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21 20:02:02 +00:00
Paolo Bonzini 98254542f9 scsi: add special traces for common commands
Can be useful when debugging the device scan phase.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-12 08:31:28 -05:00
Paolo Bonzini b45ef674f4 scsi: move sense handling to generic code
With this patch, sense data is stored in the generic data structures
for SCSI devices and requests.  The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.

At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-12 08:27:30 -05:00
Kevin Wolf b96e92470a coroutines: Locks
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-02 15:53:40 +02:00
Kevin Wolf f9f05dc58c block: Add bdrv_co_readv/writev emulation
In order to be able to call bdrv_co_readv/writev for drivers that don't
implement the functions natively, add an emulation that uses the AIO functions
to implement them.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-02 15:53:40 +02:00
Kevin Wolf da1fa91d6c block: Add bdrv_co_readv/writev
Add new block driver callbacks bdrv_co_readv/writev, which work on a
QEMUIOVector like bdrv_aio_*, but don't need a callback. The function may only
be called inside a coroutine, so a block driver implementing this interface can
yield instead of blocking during I/O.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-02 15:53:40 +02:00
Kevin Wolf 00dccaf1f8 coroutine: introduce coroutines
Asynchronous code is becoming very complex.  At the same time
synchronous code is growing because it is convenient to write.
Sometimes duplicate code paths are even added, one synchronous and the
other asynchronous.  This patch introduces coroutines which allow code
that looks synchronous but is asynchronous under the covers.

A coroutine has its own stack and is therefore able to preserve state
across blocking operations, which traditionally require callback
functions and manual marshalling of parameters.

Creating and starting a coroutine is easy:

  coroutine = qemu_coroutine_create(my_coroutine);
  qemu_coroutine_enter(coroutine, my_data);

The coroutine then executes until it returns or yields:

  void coroutine_fn my_coroutine(void *opaque) {
      MyData *my_data = opaque;

      /* do some work */

      qemu_coroutine_yield();

      /* do some more work */
  }

Yielding switches control back to the caller of qemu_coroutine_enter().
This is typically used to switch back to the main thread's event loop
after issuing an asynchronous I/O request.  The request callback will
then invoke qemu_coroutine_enter() once more to switch back to the
coroutine.

Note that if coroutines are used only from threads which hold the global
mutex they will never execute concurrently.  This makes programming with
coroutines easier than with threads.  Race conditions cannot occur since
only one coroutine may be active at any time.  Other coroutines can only
run across yield.

This coroutines implementation is based on the gtk-vnc implementation
written by Anthony Liguori <anthony@codemonkey.ws> but it has been
significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use
setjmp()/longjmp() instead of the more expensive swapcontext() and by
Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-01 12:14:09 +02:00
Gerd Hoffmann 2e97f03ed7 usb-ehci: trace: rename "next" to "nxt".
"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22 13:36:31 +02:00
Hervé Poussineau d43ed9ec25 ds1225y: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 20:54:50 +00:00
Anthony Liguori 03ff09580e Merge remote-tracking branch 'agraf/xen-next' into staging 2011-07-19 08:04:35 -05:00
Amit Shah d02e4fa4a8 virtio-console: Add some trace events
Add some trace events for messages passed between the char layer and the
virtio-serial bus.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:14 +05:30
Amit Shah 49e3fdd7f2 virtio-serial-bus: Add trace events
Add some trace events for messages passed between the guest and host.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:14 +05:30
Jan Kiszka e41d7c691a xen: Clean up map cache API naming
The map cache is a Xen thing, so its API should make this clear.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:24 +02:00
Steven Smith 01195b7347 xen: Add the Xen platform pci device
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests.  The device is necessary for PV on HVM drivers to work.

Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:43:04 +02:00
Anthony PERARD b4dd7802ca xen: Introduce VGA sync dirty bitmap support
This patch introduces phys memory client for Xen.

Only sync dirty_bitmap and set_memory are actually implemented.
migration_log will stay empty for the moment.

Xen can only log one range for bit change, so only the range in the
first call will be synced.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:40:04 +02:00
Gerd Hoffmann 025b168ca6 usb-ehci: split trace calls to handle arg count limits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann e654887f38 usb-ehci: itd handling fixes.
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page.  Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory.  Also the transfer length updates for outgoing transfers wasn't
correct.

While being at it DPRINTFs have been replaced by tracepoints.

The isoch_pause logic has been disabled.  Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds.  Even when no xfer happens we have to clear the active bit.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann 8ac6d699c4 usb-ehci: multiqueue support
This patch adds support for keeping multiple queues going at the same
time.  One slow device will not affect other devices any more.

The patch adds code to manage EHCIQueue structs.  It also does a number
of changes to the state machine:

 * The state machine will never ever stop in EXECUTING any more.
   Instead it will continue with the next queue (aka HORIZONTALQH) when
   the usb device returns USB_RET_ASYNC.
 * The state machine will stop processing when it figures it walks in
   circles (easy to figure now that we have a EHCIQueue struct for each
   QH we've processed).  The bailout logic should not be needed any
   more.  For now it is still in, but will assert() in case it triggers.
 * The state machine will just skip queues with a async USBPacket in
   flight.
 * The state machine will resume processing as soon as the async
   USBPacket is finished.

The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.

It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them.  This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:40 +02:00
Gerd Hoffmann f2c88dc10e usb-ehci: trace buffer copy
Add a trace point for buffer copies and drop the DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:29 +02:00
Gerd Hoffmann c4f8e21165 usb-ehci: improve mmio tracing
Add a separate tracepoint to log how register values change in response
to a mmio write.  Especially useful for registers which have read-only
or clear-on-write bits in them.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann dcbd0b5c0e usb-ehci: trace port state
Trace usb port operations (attach, detach, reset),
drop a few obsolete DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann 26d53979db usb-ehci: trace state machine changes
Add functions to get and set the current state of the state machine,
add tracepoints there to trace state transitions.  Add support for
traceing the queue heads and transfer descriptors as we look at them.

Drop a few DPRINTFs and all DPRINTF_ST lines, they are obsolete now.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann 439a97ccab usb-ehci: trace mmio and usbsts
This patch starts adding trace support to ehci.  It traces
updates of the status register (USBSTS), mmio access and
controller reset.

It also adds functions to set and clear status register bits
and puts them in use everywhere.

Some DPRINTF's are dropped in favor of the new tracepoints.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Paolo Bonzini d800040fb4 scsi: fix tracing of scsi requests with simple backend
The simple backend only supports a maximum of 6 arguments.  Split the
scsi_req_parsed event in two parts to cope with the limit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-05 15:05:35 +00:00
Paolo Bonzini ad3376cc55 scsi: introduce scsi_req_continue
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
2011-05-26 12:14:16 +02:00
Paolo Bonzini ab9adc88c8 scsi: introduce scsi_req_data
This abstracts calling the command_complete callback, reducing churn
in the following patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26 12:14:14 +02:00
Paolo Bonzini 5138efecf2 scsi: add tracing of scsi requests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26 12:14:14 +02:00
Stefan Hajnoczi 6f321e93ab qed: Periodically flush and clear need check bit
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.

QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed.  In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.

It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed.  This patch adds a timer
after the last allocating write request completes.  When the timer fires
it will flush and then clear the dirty bit.  The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-18 14:38:46 +02:00
Anthony PERARD 050a0ddf39 Introduce qemu_put_ram_ptr
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:01 +02:00
Jun Nakajima 432d268c05 xen: Introduce the Xen mapcache
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.

Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.

Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.

Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:01 +02:00
Michael Walle 57aa265d46 lm32: add Milkymist Minimac2 support
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-03 10:48:40 +02:00
Lluís 2b287af620 trace: [trace-events] fix print formats in some events
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-26 13:14:50 +01:00
Stefan Hajnoczi b4548fcc03 trace: Remove %s in grlib trace events
Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all).  Recording
const char * values is not meaningful if their contents are not recorded
too.

Change grlib trace events that rely on strings so that they communicate
similar information without using strings.

A follow-up patch explains this limitation and updates docs/tracing.txt.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-26 13:14:49 +01:00
Stefan Hajnoczi b8c6d09589 trace: Trace bdrv_set_locked()
It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-07 13:51:47 +02:00
Michael Walle d23948b15a lm32: add Milkymist VGAFB support
This patch adds support for Milkymist's VGA framebuffer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 883de16b46 lm32: add Milkymist UART support
This patch adds support for Milkymist's simple UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0670dadd64 lm32: add Milkymist TMU2 support
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 9683242448 lm32: add Milkymist System Controller support
This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 87a381ec34 lm32: add Milkymist SoftUSB support
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 5ee18b9c68 lm32: add Milkymist PFPU support
This patch adds support for Milkymist's Programmable FPU.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0742454485 lm32: add Milkymist Minimac support
This patch adds support for Milkymist's minimal Ethernet MAC.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle b4e37d9856 lm32: add Milkymist memory card support
This patch adds support for Milkymist's memory card core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle e4dc6d2cdc lm32: add Milkymist HPDMC support
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 25a8bb96f4 lm32: add Milkymist AC97 support
This patch adds support for the Milkymist AC97 compatible sound output and
input core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Stefan Hajnoczi ddca9fb2b5 trace: Trace posix-aio-compat.c completion and cancellation
This patch adds paio_complete() and paio_cancel() trace events to
complement the paio_submit() event.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-03-07 15:34:46 +00:00
Stefan Hajnoczi a13aac04e1 trace: Trace bdrv_aio_flush()
Add a trace event for bdrv_aio_flush() to complement the existing
bdrv_aio_readv() and bdrv_aio_writev() events.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-03-07 15:34:42 +00:00
Michael Walle f19410ca69 lm32: system control model
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Michael Walle 770ae5713a lm32: uart model
This patch add support for the LatticeMico32 UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle ea7924dcc4 lm32: timer model
This patch adds support for the LatticeMico32 system timer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 15d7dc4f80 lm32: juart model
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00