Commit Graph

43770 Commits

Author SHA1 Message Date
Peter Maydell d38ea87ac5 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell ccd241b5a2 contrib: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-15-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell cae9fc567d io: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-14-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 9bbc853bd4 qom: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-13-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell f2ad72b30e qobject: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1454089805-5470-12-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 2744d9207f net: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 7df7482bf6 slirp: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 4459bf3866 qga: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-9-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell cbf2115190 qapi: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1454089805-5470-8-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 48d4ab25e7 disas: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-7-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell aafd758410 util: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-6-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Peter Maydell 9c058332f3 backends: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-5-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Peter Maydell 2231197c87 bsd-user: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-4-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Peter Maydell 87c9b5e047 stubs: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-3-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Peter Maydell e16f4c8770 ui: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Peter Maydell 5a3be00c9a Update OpenBIOS images
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJWszNpAAoJEFvCxW+uDzIfQ/4H/i/U0AIBXr9e6PJbQSMn08XT
 hr/PtmFSJRP2GyZAMIx/OY++Ajcnp/XiZCSfh3vV1m74dYXOyi/n61H8cJjKOwUe
 8G1qtSePXTjSB4m2mNwTbmJFZFJ/gbNup61G/gMbvrv6Jmfh5g3OQ1sa3OwRJY1l
 vp1p5QCXAIsEFzUjXDRaXGGGqPOKY8Ac7YLFixbKtov27+73DB58/EnM+oDrw/cJ
 qk7CZVMjew0S+zE8roXMvy1KQAuocZnQR4i7jy3Q0KkddEbhj8jDq9jnT6AMVC9o
 Debo2tvNmNP1yGNKn1NY+oPH7WFjAD4kbK0uxwp6VISsFnpUOT/Vc5qfsXKEz9w=
 =XRuR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging

Update OpenBIOS images

# gpg: Signature made Thu 04 Feb 2016 11:18:01 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-04 16:16:00 +00:00
Peter Maydell bac8e20367 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJWswswAAoJEO8Ells5jWIRmuAIAKfexolRpauVFoMt2w69Yrk4
 0XhaAuSaazsfU06azXKjrchBUgXbw4Y6lw3tkTos4lnd8m1ovfAzSTS4q28rZ+Tf
 u5M06Fi13oyhEViGS4gt6gTwmYPTx2FTBDMCL1OZvka7GPbVsweQn0IS18j1Q2xL
 ps2kruNTad7mUa2EypuBugm3woL8kGupLUX63aWKmnvqobwFDNTKJLWiFn5eXlbg
 Zq7LxmC4R3A5K9rD8wN16ScaK3RH2x83DXaRoddtSIRwdldxG9ZCv2oFKPZrr6WA
 HsJIjurMTXhaRxNL3PsGMd/MbT7gmNF5muq8kZnkORmGxfMvi3RUuBdyhrq1I0w=
 =2Uz/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 04 Feb 2016 08:26:24 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net/filter: Fix the output information for command 'info network'
  net: always walk through filters in reverse if traffic is egress
  net: netmap: use nm_open() to open netmap ports
  e1000: eliminate infinite loops on out-of-bounds transfer start
  slirp: Adding family argument to tcp_fconnect()
  slirp: Make udp_attach IPv6 compatible
  slirp: Add sockaddr_equal, make solookup family-agnostic
  slirp: Factorizing and cleaning solookup()
  slirp: Factorizing address translation
  slirp: Make Socket structure IPv6 compatible
  slirp: Adding address family switch for produced frames
  slirp: Generalizing and neutralizing ARP code
  slirp: goto bad in udp_input if sosendto fails
  cadence_gem: fix buffer overflow
  net: cadence_gem: check packet size in gem_recieve
  qemu-doc: Do not promote deprecated -smb and -redir options
  net/slirp: Tell the users when they are using deprecated options

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-04 14:17:11 +00:00
Peter Maydell ae533a46a1 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQIcBAABAgAGBQJWsmNCAAoJEH3vgQaq/DkOQAEP/AwDY/JkKRQuTA2j8xvqxsrF
 ilzQhjvGva1WBU8iKP4L0ILvMbjzNrQh4LE31amY0Er+TDjRfqZkz7vc+/6cQ3uY
 FzXVKYySHbO3hbcamarr+sYu+T7D/6o4uvH04Vj0VDYiGJWcfKitBq2nfXbB55WW
 M9AgKLyMwvRPjfHu9Hp8BIIvQbQvzCnz0lB6q2Bzb4Gb/zR6qmXXXSLsTwXnfmD+
 LDLi/sN/hhdX2yMqNpDmNDqmGoX+NsK2C2AN0X9uEvQ0ePUcIScI338GfP9OeCGs
 To55rYGhyGCYdhEIGh8qdY47r87KrNxFtZXCMcv+oBbXuPIlpxZNESc+b5hzsWFp
 nAJq2FqVH0e69RDV/jl0TviNE8FO2auOZroD/VwWpY6Pk2rhYVUbc6dN13R69Bs5
 iGNEOBC1UI8eFOEEEoyHE+IHXCRodGUpDGa1oNzYvsPir1LKXoYqwwMjMCzDUUMA
 DEPdhQdj7Q9VzYI8GtTEuysunPfOGrjBsaMXvOgJMbU1wZqvqQU4gw5itJGeLGNC
 oc6yfIhmkv8j5N5l3qBzIOcU0iJGRlX2Z8pMPKjtvuLkkw6TBAm2Jal7Xkx8C3TX
 AGXE05khcq8y8wD3jtZJfpLlSkJoJpcD1BaAxig1H1t8hrtntUNnAQ9OfUnAuAZ5
 yjN4MOqG+rPelBqEaMMj
 =UnwI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

# gpg: Signature made Wed 03 Feb 2016 20:29:54 GMT using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  dma: remove now useless DMA_* functions
  sb16: use IsaDma interface instead of global DMA_* functions
  gus: use IsaDma interface instead of global DMA_* functions
  cs4231a: use IsaDma interface instead of global DMA_* functions
  fdc: use IsaDma interface instead of global DMA_* functions
  sparc64: disable floppy DMA
  sparc: disable floppy DMA
  magnum: disable floppy DMA for now
  i8257: implement the IsaDma interface
  isa: add an ISA DMA interface, and store it within the ISA bus
  i8257: move state definition to new independent header
  i8257: QOM'ify
  i8257: add missing const
  i8257: make the DMA running method per controller
  i8257: rename functions to start with i8257_ prefix
  i8257: rename struct dma_regs to I8257Regs
  i8257: rename struct dma_cont to I8257State
  i8257: pass ISA bus to DMA_init() function
  i82374: device only existed as ISA device, so simplify device
  fdc: fix detection under Linux

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-04 12:50:43 +00:00
Mark Cave-Ayland 44c44eceea Update OpenBIOS images
Update OpenBIOS images to SVN r1378 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-02-04 11:17:44 +00:00
Peter Maydell 071aacc9c9 target-arm queue:
* virt-acpi-build: add always-on property for timer
  * various fixes for EL2 and EL3 behaviour
  * arm: virt-acpi: each MADT.GICC entry as enabled unconditionally
  * target-arm: Don't report presence of EL2 if it doesn't exist
  * raspi: add raspberry pi 2 machine
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJWsk26AAoJEDwlJe0UNgzeWwAP/j5AWKgqsi9hpskq1BVtjc8P
 yZZlsRcSN8oyKMRoCXUCXztQhiBSYVABeeABH5JWsoxCK1CA6vBqkOl89ENfhwNZ
 TmeRh4BLCwfW+YIb9OG84JoVpCbvt6M7KYpCA3DJBy5GLOsO5vxd3E3BLN7O+dKH
 ljEcF0l+SlJAupK692A34nyS01dCs91xwP/kigOSPoVjpkUBOmSHrQhD4wTHjunr
 xj6fgc6rLqnG9TrNUkTn8aIB8lZ1j9VmJUetbp0x/Zo7TKcC8KObh+pYk3hik7JK
 PLhNJU0tPe55PEx+RLi8i6vYZp8Fqsl5qskjshl3uBtvK5TR0doxbIAu89raapWL
 Bg7xesN2H6Z+w0tq6TRLU4FhL+MtN0+wQy6PJ55NOkHVgZv9/i5keH4Xe/vZwMZd
 YGVhhrSSjfGmR878Rh6s7v1ZNFhAJenti4icd66e82InPl6UHf2SC34dLBpzW6SF
 qnmIt3BCHIDruwJKmWF71RAjmd9eR4xSEw1wcqoZF7UqghnQOBSuszEv8dlvRmES
 zNYgDqOjxQ79X3zmtXLKQ8UFoGQqhy3E2DF6lsHgxHCwcwHKKuro6Q3LQWnLZvau
 e5CVQShK2lU8o2dwMLmXakjoFGleCG0OsJBz9Ls89w1YV/c4X/UPFXwAJMhJ5P9v
 cYtw9ol7WJmT5yLxQGtI
 =Ul6h
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160203' into staging

target-arm queue:
 * virt-acpi-build: add always-on property for timer
 * various fixes for EL2 and EL3 behaviour
 * arm: virt-acpi: each MADT.GICC entry as enabled unconditionally
 * target-arm: Don't report presence of EL2 if it doesn't exist
 * raspi: add raspberry pi 2 machine

# gpg: Signature made Wed 03 Feb 2016 18:58:02 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160203:
  raspi: add raspberry pi 2 machine
  arm/boot: move highbank secure board setup code to common routine
  bcm2836: add bcm2836 SoC device
  bcm2836_control: add bcm2836 ARM control logic
  bcm2835_peripherals: add rollup device for bcm2835 peripherals
  bcm2835_ic: add bcm2835 interrupt controller
  bcm2835_property: add bcm2835 property channel
  bcm2835_mbox: add BCM2835 mailboxes
  target-arm: Don't report presence of EL2 if it doesn't exist
  libvixl: Avoid std::abs() of 64-bit type
  arm: virt-acpi: each MADT.GICC entry as enabled unconditionally
  target-arm: Implement the S2 MMU inputsize > pamax check
  target-arm: Rename check_s2_startlevel to check_s2_mmu_setup
  target-arm: Apply S2 MMU startlevel table size check to AArch64
  hw/arm: Setup EL1 and EL2 in AArch64 mode for 64bit Linux boots
  target-arm: Make various system registers visible to EL3
  virt-acpi-build: add always-on property for timer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-04 11:06:35 +00:00
zhanghailiang aa9156f4b1 net/filter: Fix the output information for command 'info network'
The properties of netfilter object could be changed by 'qom-set'
command, but the output of 'info network' command is not updated,
because it got the old information through nf->info_str, it will
not be updated while we change the value of netfilter's property.

Here we split a helper function that could collect the output
information for filter, and also remove the useless member
'info_str' from struct NetFilterState.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Li Zhijian 25aaadf063 net: always walk through filters in reverse if traffic is egress
Previously, if we attach more than one filters for a single netdev,
both ingress and egress traffic will go through net filters in same
order like:

ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device
egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev.

This is against the natural feeling and will complicate filters
configuration since in some scenes, we hope filters handle the egress
traffic in a reverse order. For example, in colo-proxy (will be
implemented later), we have a redirector filter and a colo-rewriter
filter, we need the filter behave like:

ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device

Since both buffer filter and dump do not require strict order of
filters, this patch switches to always let egress traffic walk through
net filters in reverse to simplify the possible filters configuration
in the future.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Vincenzo Maffione ab685220f6 net: netmap: use nm_open() to open netmap ports
This patch simplifies the netmap backend code by means of the nm_open()
helper function provided by netmap_user.h, which hides the details of
open(), iotcl() and mmap() carried out on the netmap device.

Moreover, the semantic of nm_open() makes it possible to open special
netmap ports (e.g. pipes, monitors) and use special modes (e.g. host rings
only, single queue mode, exclusive access).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Laszlo Ersek dd793a7488 e1000: eliminate infinite loops on out-of-bounds transfer start
The start_xmit() and e1000_receive_iov() functions implement DMA transfers
iterating over a set of descriptors that the guest's e1000 driver
prepares:

- the TDLEN and RDLEN registers store the total size of the descriptor
  area,

- while the TDH and RDH registers store the offset (in whole tx / rx
  descriptors) into the area where the transfer is supposed to start.

Each time a descriptor is processed, the TDH and RDH register is bumped
(as appropriate for the transfer direction).

QEMU already contains logic to deal with bogus transfers submitted by the
guest:

- Normally, the transmit case wants to increase TDH from its initial value
  to TDT. (TDT is allowed to be numerically smaller than the initial TDH
  value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe
  that QEMU currently has here is a check against reaching the original
  TDH value again -- a complete wraparound, which should never happen.

- In the receive case RDH is increased from its initial value until
  "total_size" bytes have been received; preferably in a single step, or
  in "s->rxbuf_size" byte steps, if the latter is smaller. However, null
  RX descriptors are skipped without receiving data, while RDH is
  incremented just the same. QEMU tries to prevent an infinite loop
  (processing only null RX descriptors) by detecting whether RDH assumes
  its original value during the loop. (Again, wrapping from RDLEN to 0 is
  normal.)

What both directions miss is that the guest could program TDLEN and RDLEN
so low, and the initial TDH and RDH so high, that these registers will
immediately be truncated to zero, and then never reassume their initial
values in the loop -- a full wraparound will never occur.

The condition that expresses this is:

  xdh_start >= s->mac_reg[XDLEN] / sizeof(desc)

i.e., TDH or RDH start out after the last whole rx or tx descriptor that
fits into the TDLEN or RDLEN sized area.

This condition could be checked before we enter the loops, but
pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for
bogus DMA addresses, so we just extend the existing failsafes with the
above condition.

This is CVE-2016-1981.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Guillaume Subiron cc573a6924 slirp: Adding family argument to tcp_fconnect()
This patch simply adds a unsigned short family argument to remove the hardcoded
"AF_INET" in the call of qemu_socket().

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Guillaume Subiron 9b5a30dc41 slirp: Make udp_attach IPv6 compatible
A unsigned short is now passed in argument to udp_attach instead of using a
hardcoded "AF_INET" to call qemu_socket().

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Guillaume Subiron 8a87f121ca slirp: Add sockaddr_equal, make solookup family-agnostic
This patch makes solookup() compatible with varying address
families, by using a new sockaddr_equal() function that compares
two sockaddr_storage.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron a5fd24aa6d slirp: Factorizing and cleaning solookup()
solookup() was only compatible with TCP. Having the socket list in
argument, it is now compatible with UDP too.

Some optimization code is factorized inside the function (the function
look at the last returned result before browsing the complete socket
list).

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron 5379229a27 slirp: Factorizing address translation
This patch factorizes some duplicate code into a new function,
sotranslate_out(). This function perform the address translation when a
packet is transmitted to the host network. If the packet is destinated
to the host, the loopback address is used, and if the packet is
destinated to the virtual DNS, the real DNS address is used. This code
is just a copy of the existent, but factorized and ready to manage the
IPv6 case.

On the same model, the major part of udp_output() code is moved into a
new sotranslate_in(). This function is directly used in sorecvfrom(),
like sotranslate_out() in sosendto().
udp_output() becoming useless, it is removed and udp_output2() is
renamed into udp_output(). This adds consistency with the udp6_output()
function introduced by further patches.

Lastly, this factorizes some duplicate code into sotranslate_accept(), which
performs the address translation when a connection is established on the host
for port forwarding: if it comes from localhost, the host virtual address is
used instead.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron eae303ff23 slirp: Make Socket structure IPv6 compatible
This patch replaces foreign and local address/port couples in Socket
structure by 2 sockaddr_storage which can be casted in sockaddr_in.
Direct access to address and port is still possible thanks to some
\#define, so retrocompatibility of the existing code is assured.

The ss_family field of sockaddr_storage is declared after each socket
creation.

The whole structure is also saved/restored when a Qemu session is
saved/restored.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron 18137fba35 slirp: Adding address family switch for produced frames
In if_encap, a switch is added to prepare for the IPv6 case. Some code
is factorized.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron fc3779a118 slirp: Generalizing and neutralizing ARP code
Basically, this patch replaces "arp" by "resolution" every time "arp"
means "mac resolution" and not specifically ARP.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron 86c9e1e9d7 slirp: goto bad in udp_input if sosendto fails
Before this patch, if sosendto fails, udp_input is executed as if the
packet was sent, recording the packet for icmp errors, which does not
makes sense since the packet was not actually sent, errors would be
related to a previous packet.

This patch adds a goto bad to cut the execution of this function.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Michael S. Tsirkin d7f053652f cadence_gem: fix buffer overflow
gem_transmit copies a packet from guest into an tx_packet[2048]
array on stack, with size limited by descriptor length set by guest.  If
guest is malicious and specifies a descriptor length that is too large,
and should packet size exceed array size, this results in a buffer
overflow.

Reported-by: 刘令 <liuling-it@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Prasad J Pandit 244381ec19 net: cadence_gem: check packet size in gem_recieve
While receiving packets in 'gem_receive' routine, if Frame Check
Sequence(FCS) is enabled, it copies the packet into a local
buffer without checking its size. Add check to validate packet
length against the buffer size to avoid buffer overflow.

Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Thomas Huth c8c6afa886 qemu-doc: Do not promote deprecated -smb and -redir options
Since -smb and -redir are deprecated options, we should not
use them as examples in the documentation anymore.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Thomas Huth f853ac66c7 net/slirp: Tell the users when they are using deprecated options
We don't want to support the legacy -tftp, -bootp, -smb and
-net channel options forever. So let's start telling the users
that they are deprecated and what option should be used instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Peter Maydell 382d34ff9f -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJWsiEWAAoJEJykq7OBq3PIGXYIALsxSU9HYOBqt/7J5E07EUxS
 ef3pu/CnMSHw3I/oLVe+pdpwyKMEhRRa75t8DSl4+UodsPXyZ/YtuBTm2v7J+FXD
 tjOoDYimAuDqeJU+km4O3PRUKSUKIlo0V4g7DRWF1qCCC4xw8SwmkBvfax7oFf3a
 ew3s0Lw/v11/foe5lKTkgTBgoXKk/Oc1E3rhSsOb7WvZq0CbrhRV3R5Lp0jbXkjF
 1LMijbsQvzQY7v07r4FcZ2vwhdI5eUXQOKg6sHMBqBbNdrR0zEQeylgdXq7H2rqm
 RhdkK4Dd1bs4K1gk4TXNhysd7/U5gRJhGqeBkYCI12lNY9AJwyH0OBcBxGZBV6U=
 =pTqw
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Wed 03 Feb 2016 15:47:34 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  log: add "-d trace:PATTERN"
  trace: switch default backend to "log"
  trace: convert stderr backend to log
  log: move qemu-log.c into util/ directory
  log: do not unnecessarily include qom/cpu.h
  trace: add "-trace help"
  trace: add "-trace enable=..."
  trace: no need to call trace_backend_init in different branches now
  trace: split trace_init_file out of trace_init_backends
  trace: split trace_init_events out of trace_init_backends
  trace: fix documentation
  trace: track enabled events in a separate array
  trace: count number of enabled events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 19:00:33 +00:00
Hervé Poussineau ba0a71022c dma: remove now useless DMA_* functions
Keep only DMA_init function as a wrapper around DMA controllers creation.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-20-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:58 -05:00
Hervé Poussineau f203c16ea2 sb16: use IsaDma interface instead of global DMA_* functions
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-19-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:58 -05:00
Hervé Poussineau 467be5f2f0 gus: use IsaDma interface instead of global DMA_* functions
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-18-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:58 -05:00
Hervé Poussineau 2d01109133 cs4231a: use IsaDma interface instead of global DMA_* functions
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-17-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:58 -05:00
Hervé Poussineau c8a35f1cf0 fdc: use IsaDma interface instead of global DMA_* functions
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-16-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:58 -05:00
Hervé Poussineau c3ae40e12c sparc64: disable floppy DMA
All functions relative to DMA (DMA_*() functions) are stubs on sparc64 platform.
Disable the DMA of the floppy controller, instead of calling these stubs.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-15-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:57 -05:00
Hervé Poussineau dd446051b7 sparc: disable floppy DMA
All functions relative to DMA (DMA_*() functions) are stubs on sparc platform.
Disable the DMA in the floppy controller, instead of calling these stubs.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-14-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:57 -05:00
Hervé Poussineau 020e298699 magnum: disable floppy DMA for now
Floppy uses the DMA controller in rc4030 chipset, and not the i8259 from the ISA bus.
It's better to disable DMA than to call the wrong DMA controller.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-13-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:57 -05:00
Hervé Poussineau 16ffe36360 i8257: implement the IsaDma interface
Rewrite the global DMA_*() functions to use the IsaDma interface.
Note that these functions will be deleted in a few commits.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-12-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:57 -05:00
Hervé Poussineau 5484f30b2c isa: add an ISA DMA interface, and store it within the ISA bus
This will permit to deprecate global DMA_*() functions.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-11-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:57 -05:00
Hervé Poussineau f5f19ee2e4 i8257: move state definition to new independent header
We will now be able to embed the i8257 interrupt controller in another object.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-10-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:56 -05:00
Hervé Poussineau 340e19ebf2 i8257: QOM'ify
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1453843944-26833-9-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03 11:28:56 -05:00