Commit Graph

109 Commits

Author SHA1 Message Date
Don Slutz dffacd4654 char/serial: Fix emptyness handling
The commit 88c1ee73d3
char/serial: Fix emptyness check

Still causes extra NULL byte(s) to be sent.

So if the fifo is empty, do not send an extra NULL byte.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Message-id: 1395160174-16006-1-git-send-email-dslutz@verizon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-07 14:51:32 +01:00
Rob Herring f72dbf3d26 pl011: fix incorrect logic to set the RXFF flag
The receive fifo full bit should be set when 1 character is received and
the fifo is disabled or when 16 characters are in the fifo.

Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-4-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-18 19:38:56 +00:00
Rob Herring ce8f0905a5 pl011: fix UARTRSR accesses corrupting the UARTCR value
Offset 4 is UARTRSR/UARTECR, not the UARTCR. The UARTCR would be
corrupted if the UARTRSR is ever written. Fix by implementing a correct
model of the UARTRSR/UARTECR register. Reads of this register simply
reflect the error bits in data register. Only breaks can be triggered in
QEMU. With the pl011_can_receive function, we effectively have flow
control between the host and the model. Framing and parity errors simply
don't make sense in the model and will never occur.

Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-3-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-18 19:38:55 +00:00
Rob Herring 22709e90a2 pl011: reset the fifo when enabled or disabled
Intermittent issues have been seen where no serial input occurs. It
appears the pl011 gets in a state where the rx interrupt never fires
because the rx interrupt only asserts when crossing the fifo trigger
level. The fifo state appears to get out of sync when the pl011 is
re-configured. This combined with the rx timeout interrupt not being
modeled results in no more rx interrupts.

Disabling the fifo is the recommended way to clear the tx fifo in the
TRM (section 3.3.8). The behavior in this case for the rx fifo is
undefined in the TRM, but having fifo contents to be maintained during
configuration changes is not likely expected behavior. Reseting the
fifo state when the fifo size is changed is the simplest solution.

Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-2-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-18 19:36:49 +00:00
Christian Borntraeger 4f3ed190a6 s390x/sclpconsole-lm: Fix and simplify irq setup
valgrind complains about a memory leak in irq setup of sclpconsole:

==42117== 8 bytes in 1 blocks are definitely lost in loss record 89of 833
==42117==    at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117==    by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117==    by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117==    by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117==    by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117==    by 0x800F5685: console_init (sclpconsole.c:235)
==42117==    by 0x80297C79: event_realize (event-facility.c:386)
==42117==    by 0x80105071: device_set_realized (qdev.c:693)
==42117==    by 0x801CDC4B: property_set_bool (object.c:1337)
 ==42117==    by 0x801CBD7F: object_property_set (object.c:819)
[...]

We dont need the indirection of an qemu irq to inject an slcp interrupt.
Fixes a valgrind error and makes the code simpler.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
2014-03-17 22:01:19 +01:00
Christian Borntraeger b074e62205 s390x/sclpconsole: Fix and simplify interrupt injection
valgrind complains about a memory leak in irq setup of sclpconsole:

==42117== 8 bytes in 1 blocks are definitely lost in loss record 89 of 833
==42117==    at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117==    by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117==    by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117==    by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117==    by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117==    by 0x800F5685: console_init (sclpconsole.c:235)
==42117==    by 0x80297C79: event_realize (event-facility.c:386)
==42117==    by 0x80105071: device_set_realized (qdev.c:693)
==42117==    by 0x801CDC4B: property_set_bool (object.c:1337)
==42117==    by 0x801CBD7F: object_property_set (object.c:819)
[...]

Turns out that we actually dont need the indirection, so trigger the
sclp interrupt directly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
2014-03-17 22:01:19 +01:00
Andreas Färber be21c33616 virtio-console: Fix VIRTIO_CONSOLE() cast macro
Commit 0399a3819b (virtio-console: QOM
cast cleanup for VirtConsole) broke virtserialport since it shares
functions and state struct with virtconsole. Let virtconsole inherit
from virtserialport, and use virtserialport type for casting.

Note that virtio-serial-port is the abstract base type in
virtio-serial-bus.c, whereas virtserialport is the user-instantiatable
type in virtio-console.c. Therefore using TYPE_VIRTIO_CONSOLE_SERIAL_PORT.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 21:12:07 +01:00
Andreas Färber 2ef66625f3 virtio-serial-port: Convert to QOM realize/unrealize
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 01:21:57 +01:00
Andreas Färber 0399a3819b virtio-console: QOM cast cleanup for VirtConsole
Introduce type constant, cast macro and rename parent field.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 01:21:57 +01:00
Peter Maydell 61e8a92364 QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
 * NAND fix for "info qtree"
 * Cleanup and extension of QOM machine tests
 * IndustryPack test cases and conversion to QOM realize
 * I2C cleanups
 * Cleanups of legacy qdev properties
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
 vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
 DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
 9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
 4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
 q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
 XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
 HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
 FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
 hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
 PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
 O1CfsE7x0GH/Rbi/Hxhu
 =KRcc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 13:05:48 +00:00
Peter Crosthwaite 88c1ee73d3 char/serial: Fix emptyness check
This was guarding against a full fifo rather than an empty fifo when
popping. Fix.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-15 16:10:25 +04:00
Paolo Bonzini c7bcc85d66 qdev: Remove hex8/32/64 property types
Replace them with uint8/32/64.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:04 +01:00
Andreas Färber 1f9c4cfda4 ipack: Move IndustryPack out of hw/char/
Move the header defining an IPackBus and IPackDevice base class into
a new include/ directory and move their implementation and a
PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/.

Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:11:53 +01:00
Andreas Färber 08c9cacf0e ipoctal232: QOM parent field cleanup
Clean up accesses to IPOctalState::dev field and rename it.

Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:07:20 +01:00
Andreas Färber 227d327252 ipack: QOM parent field cleanup for IPackDevice
Rename the IPackDevice::qdev field to avoid accidental use.

Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:07:20 +01:00
Andreas Färber a21ac343d1 ipack: QOM parent field cleanup for IPackBus
Clean up the only user of IPackBus::qbus field and rename it.

Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:07:20 +01:00
Andreas Färber 5c57090255 ipack: Convert to QOM realize
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:07:20 +01:00
Michael Walle 02d3bf7fe7 lm32_uart/lm32_juart: use qemu_chr_fe_write_all()
qemu_chr_fe_write() may return EAGAIN. Therefore, use
qemu_chr_fe_write_all().

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-04 19:34:30 +01:00
Antony Pavlov b2c623a3d9 milkymist-uart: use qemu_chr_fe_write_all() instead of qemu_chr_fe_write()
qemu_chr_fe_write() is capable of returning 0
to indicate EAGAIN (and friends) and we don't
handle this.

Just change it to qemu_chr_fe_write_all() to fix.

Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-04 19:34:29 +01:00
Anthony Liguori 666eb032d3 Merge remote-tracking branch 'mjt/trivial-patches' into staging
* mjt/trivial-patches:
  acpi unit-test: Remove temporary disk after test
  mainstone: Fix duplicate array values for key 'space'
  pxa27x: Add 'const' attribute to keyboard maps
  pxa27x: Reduce size of keyboard matrix mapping
  doc: Mention chardev:id in available devices for -serial
  configure: Python tests must be done before help message
  configure: Rewrite code for help message
  fix -boot strict regressed in commit 6ef4716
  vl: make boot_strict variable static (not used outside vl.c)
  x86: only allow real mode to access 32bit without LMA
  linux-user: Use macro TARGET_NSIG_WORDS where possible
  exynos4210: Use macro ARRAY_SIZE where possible
  ui/cocoa: Use macro ARRAY_SIZE where possible
  misc: Use macro ARRAY_SIZE where possible
  openrisc: Fix spelling in comment (transaltion -> translation)
  hw/arm/highbank: Simplify code (memory region in device state)

Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-09 11:24:12 -08:00
Peter Crosthwaite 38acd64b1c char/cadence_uart: Implement Tx flow control
If the UART back-end blocks, buffer in the Tx FIFO to try again later.
This stops the IO-thread busy waiting on char back-ends (which causes
all sorts of performance problems).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4bea048b3ab38425701d82ccc1ab92545c26b79c.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 1e5d8cacb7 char/cadence_uart: Delete redundant rx rst logic
uart_rx_reset() called immediately above already does this. Remove.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 05e30826496cf2579084ed801ac0b2c0d0a3071f.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 86baecc3e4 char/cadence_uart: Use the TX fifo for transmission
Populate the TxFIFO with the Tx data before sending. Prepares
support for proper Tx flow control implementation.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bdf7f8af2ef02839bea18665701bc2612f7baa6f.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite d0ac820fe4 char/cadence_uart: Fix can_receive logic
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:

Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 2152e08ad1 char/cadence_uart: Remove TX timer & add TX FIFO state
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.

The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.

While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 11a239a51c char/cadence_uart: Define Missing SR/ISR fields
Some (interrupt) status register bits relating to the TxFIFO path were
not defined. Define them. This prepares support for proper Tx data path
flow control.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2068b963f0af8cc834c353944e9fa816d950b163.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 676f4c095d char/cadence_uart: Simplify status generation
The status register bits are always pure functions of other device
state. Move the generation of these bits to the update_status()
function to simplify. Makes developing much easier as theres now no need
to recheck status bits on all the changes to rx/tx fifo state.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 321994929f789096975104f99c55732774be4cae.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 1e77c91e24 char/cadence_uart: s/r_fifo/rx_fifo
Rename this field to match the many other uses of "rx". Xilinx
docmentation (UG585) also refers to this as "RxFIFO".

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7386d7cee0ea175f7e53ed5ff045265528d34e32.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 823dd48761 char/cadence_uart: Fix reset.
Don't reset the uart as an init step. Register the reset function as a
proper reset fn instead.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d82cd2e65e5a6f8b6deeecb6cced61f0bf3f8c89.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 589bfb6888 char/cadence_uart: Add missing uart_update_state
This should be rechecked on bus write accesses as such accesses may
change the underlying state that generates the interrupt. Particular
relevant for when the guest touches the interrupt status or mask.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1c250cd61b7b8de492fbc8b79b8370958a56d83b.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite 059ca2bf0d char/cadence_uart: Mark struct fields as public/private
As per current QOM conventions.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a1e31bd62e9709ffb9b3efc6c120f83f30b7a660.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Stefan Weil c46b07f0d7 exynos4210: Use macro ARRAY_SIZE where possible
This improves readability and simplifies the code.

Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-23 16:02:19 +04:00
Antony Pavlov 142593c9d7 hw/arm/digic: add UART support
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-5-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Anthony Liguori e157b8fdd4 Merge remote-tracking branch 'bonzini/virtio' into staging
# By Andreas Färber (18) and Paolo Bonzini (12)
# Via Paolo Bonzini
* bonzini/virtio: (30 commits)
  virtio: Convert exit to unrealize
  virtio: Complete converting VirtioDevice to QOM realize
  virtio-scsi: Convert to QOM realize
  virtio-rng: Convert to QOM realize
  virtio-balloon: Convert to QOM realize
  virtio-net: Convert to QOM realize
  virtio-serial: Convert to QOM realize
  virtio-blk: Convert to QOM realize
  virtio-9p: Convert to QOM realize
  virtio: Start converting VirtioDevice to QOM realize
  virtio-scsi: QOM realize preparations
  virtio-rng: QOM realize preparations
  virtio-balloon: QOM realize preparations
  virtio-net: QOM realize preparations
  virtio-serial: QOM realize preparations
  virtio-blk: QOM realize preparations
  virtio-9p: QOM realize preparations
  virtio-blk-dataplane: Improve error reporting
  virtio-pci: add device_unplugged callback
  virtio-rng: switch exit callback to VirtioDeviceClass
  ...
2013-12-13 11:10:33 -08:00
Andreas Färber 306ec6c3ce virtio: Convert exit to unrealize
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 21:46:49 +01:00
Andreas Färber 863462440d virtio-serial: Convert to QOM realize
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 21:46:49 +01:00
Andreas Färber b1a20c3fca virtio-serial: QOM realize preparations
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 21:46:49 +01:00
Paolo Bonzini 0e86c13fe2 virtio-serial: switch exit callback to VirtioDeviceClass
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.

Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 21:46:48 +01:00
Stefan Weil 1246b259f8 misc: Replace 'struct QEMUTimer' by 'QEMUTimer'
Most code already used QEMUTimer without the redundant 'struct' keyword.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02 21:03:39 +04:00
Alexey Kardashevskiy 29fdedfed5 spapr: add vio-bus devices to categories
In order to get devices appear in output of
"./qemu-system-ppc64 -device ?",
they must be assigned to one of DEVICE_CATEGORY_XXXX.

This puts VIO devices classes to corresponding categories.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-11-08 04:33:18 +01:00
Antony Pavlov c77dd5f614 milkymist-uart: Use Device::realize instead of SysBusDevice::init
Use of SysBusDevice::init is deprecated. Use Device::realize instead.

Also introduce TypeInfo::instance_init milkymist_uart_init().

Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:29 +01:00
Anthony Liguori b0eb759fb2 pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
 - pci master abort support by Marcel
 - pci IRQ API rework by Marcel
 - acpi generation support by myself
 
 Everything has gone through several revisions, latest versions have been on
 list for a while without any more comments, tested by several
 people.
 
 Please pull for 1.7.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
 X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
 34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
 rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
 /iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
 2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
 =CVfs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci, pc, acpi fixes, enhancements

This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself

Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.

Please pull for 1.7.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

* mst/tags/for_anthony: (39 commits)
  ssdt-proc: update generated file
  ssdt: fix PBLK length
  i386: ACPI table generation code from seabios
  pc: use new api to add builtin tables
  acpi: add interface to access user-installed tables
  hpet: add API to find it
  pvpanic: add API to access io port
  ich9: APIs for pc guest info
  piix: APIs for pc guest info
  acpi/piix: add macros for acpi property names
  i386: define pc guest info
  loader: allow adding ROMs in done callbacks
  i386: add bios linker/loader
  loader: use file path size from fw_cfg.h
  acpi: ssdt pcihp: updat generated file
  acpi: pre-compiled ASL files
  acpi: add rules to compile ASL source
  i386: add ACPI table files from seabios
  q35: expose mmcfg size as a property
  q35: use macro for MCFG property name
  ...

Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 16:58:32 +01:00
Marcel Apfelbaum 9e64f8a3fc hw: set interrupts using pci irq wrappers
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.

An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.

Removed irq related fields from state if not used anymore.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:11:45 +03:00
Guenter Roeck 84faf7c392 sh4: Fix serial line access for Linux kernels later than 3.2
With Linux kernel version 3.3 or later, qemu fails with the following message:

sh_serial: unsupported read from 0x18
  Aborted

Reported-and-analyzed-by: Rob Landley <rob@landley.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-02 22:55:28 +04:00
Heinz Graalfs 6a444f8507 s390/sclplmconsole: Add support for SCLP line-mode console
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:30 +02:00
Christian Borntraeger c3d9f24a39 s390/eventfacility: allow childs to handle more than 1 event type
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20 13:55:30 +02:00
Christian Borntraeger 8b8b1138df s390/eventfacility: remove unused event_type variable
The event_type variable is never used. Get rid of it.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20 13:55:30 +02:00
Heinz Graalfs 3af6de321f s390/sclp: add reset() functions
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:29 +02:00
Heinz Graalfs cb335bebe1 s390/sclpconsole: Add code to support live migration for sclpconsole
This patch adds the necessary life migration pieces to the sclp code
by using vmstate_register.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:29 +02:00
Heinz Graalfs ea9ad3e945 s390/sclpconsole: modify definition of input buffer
To use VMState for migration, we need to adapt some sclp code:
   - allocate console buffer as part of the console
   - change semantic of sclpconsole offset fields

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:29 +02:00