Commit Graph

104 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé a7e1562ca2 hw/ssi/xilinx_spi: Use DeviceState::realize rather than SysBusDevice::init
Move from the legacy SysBusDevice::init method to using DeviceState::realize.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20181002212522.23303-5-f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
Cédric Le Goater b3d6b8f5af aspeed/smc: fix some alignment issues
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180921161939.822-6-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 15:13:24 +01:00
Peter Maydell 7d3912f54e hw/ssi/pl022: Correct wrong DMACR and ICR handling
In the PL022, register offset 0x20 is the ICR, a write-only
interrupt-clear register.  Register offset 0x24 is DMACR, the DMA
control register.  We were incorrectly implementing (a stub version
of) DMACR at 0x20, and not implementing anything at 0x24.  Fix this
bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-21-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:46 +01:00
Peter Maydell 139d941e5a hw/ssi/pl022: Correct wrong value for PL022_INT_RT
The PL022 interrupt registers have bits allocated as:
 0: ROR (receive overrun)
 1: RT (receive timeout)
 2: RX (receive FIFO half full or less)
 3: TX (transmit FIFO half full or less)

A cut and paste error meant we had the wrong value for
the PL022_INT_RT constant. This bug doesn't affect device
behaviour, because we don't implement the receive timeout
feature and so never set that interrupt bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-20-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:46 +01:00
Peter Maydell 13391a563f hw/ssi/pl022: Use DeviceState::realize rather than SysBusDevice::init
Move from the legacy SysBusDevice::init method to using
DeviceState::realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-19-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:45 +01:00
Peter Maydell 275ff67f40 hw/ssi/pl022: Don't directly call vmstate_register()
Use the DeviceState vmsd pointer rather than calling vmstate_register()
directly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-18-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:45 +01:00
Peter Maydell 66d9aa790f hw/ssi/pl022: Set up reset function in class init
Currently the PL022 calls pl022_reset() from its class init
function. Make it register a DeviceState reset method instead,
so that we reset the device on system reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-17-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:45 +01:00
Peter Maydell 1d52866f5a hw/ssi/pl022: Allow use as embedded-struct device
Create a new include file for the pl022's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.

While we're adding the new file to MAINTAINERS, add
also the .c file, which was missing an entry.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-16-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 13:17:44 +01:00
Peter Maydell 5321fa68fd hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code
We now support direct execution from MMIO regions in the
core memory subsystem. This means that we don't need to
have device-specific support for it, and we can remove
the request_ptr handling from the Xilinx SPIPS device.
(It was broken anyway due to race conditions, and disabled
by default.)

This device is the only in-tree user of this API.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-2-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Trent Piepho 016d4b0127 imx_spi: Unset XCH when TX FIFO becomes empty
The current emulation will clear the XCH bit when a burst finishes.
This is not quite correct.  According to the i.MX7d referemce manual,
Rev 0.1, §10.1.7.3:

    This bit [XCH] is cleared automatically when all data in the TXFIFO
    and the shift register has been shifted out.

So XCH should be cleared when the FIFO empties, not on completion of a
burst.  The FIFO is 64 x 32 bits = 2048 bits, while the max burst size
is larger at 4096 bits.  So it's possible that the burst is not finished
after the TXFIFO empties.

Sending a large block (> 2048 bits) with the Linux driver will use a
burst that is larger than the TXFIFO.  After the TXFIFO has emptied XCH
does not become unset, as the burst is not yet finished.

What should happen after the TXFIFO empties is the driver will refill it
and set XCH.  The rising edge of XCH will trigger another transfer to
begin.  However, since the emulation does not set XCH to 0, there is no
rising edge and the next trasfer never begins.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180731201056.29257-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16 14:29:57 +01:00
Philippe Mathieu-Daudé 31a1246df6 hw/ssi/omap_spi: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180624040609.17572-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:40 +01:00
Sai Pavan Boddu 21d887cde9 xilinx_spips: Make dma transactions as per dma_burst_size
Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
dma-burst-size property.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1529660880-30376-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:39 +01:00
Cédric Le Goater 96c4be955b aspeed/smc: rename aspeed_smc_flash_send_addr() to aspeed_smc_flash_setup()
Also handle the fake transfers for dummy bytes in this setup
routine. It will be useful when we activate MMIO execution.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:39 +01:00
Cédric Le Goater a57baeb45e aspeed/smc: fix HW strapping
Only the flash type is strapped by HW. The 4BYTE mode is set by
firmware when the flash device is detected.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:39 +01:00
Cédric Le Goater 0721309ed7 aspeed/smc: fix dummy cycles count when in dual IO mode
When configured in dual I/O mode, address and data are sent in dual
mode, including the dummy byte cycles in between. Adapt the count to
the IO setting.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:39 +01:00
Marc-André Lureau 265b578c58 object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add a reference to the target object, while
set_link() does.

Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.

Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:30 +02:00
Sai Pavan Boddu fbf3275266 xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
SNOOP_NONE state handle is moved above in the if ladder, as it's same
as SNOOP_STRIPPING during data cycles.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 1524119244-1240-1-git-send-email-saipava@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-26 11:04:40 +01:00
Francisco Iglesias b8cc850352 xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands
Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode
for matching what is expected by Micron (Numonyx) flashes (the default target
flash type of the QSPI).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01 11:05:44 +00:00
Francisco Iglesias 0c4a94b8e3 xilinx_spips: Enable only two slaves when reading/writing with stripe
Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and
chip selects are enabled (e.g reading/writing with stripe).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01 11:05:44 +00:00
Markus Armbruster e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Francisco Iglesias fbe5dac7b2 xilinx_spips: Correct usage of an uninitialized local variable
Coverity found that the variable tx_rx in the function
xilinx_spips_flush_txfifo was being used uninitialized (CID 1383841). This
patch corrects this by always initializing tx_rx to zeros.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20180124215708.30400-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
Alistair Francis a89f364ae8 Replace all occurances of __FUNCTION__ with __func__
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22 09:46:18 +01:00
Eric Blake 2562755ee7 maint: Fix macros with broken 'do/while(0); ' usage
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'.  Although our coding style frowns on brace-less 'if':
  if (cond)
    statement;
  else
    something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'.  But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'.  Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.

The change should have no semantic impact.  I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.

Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16 14:54:52 +01:00
Philippe Mathieu-Daudé f7ee2cf9d1 hw/ssi/aspeed_smc: remove unused #include
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Philippe Mathieu-Daudé d6e3f50a47 misc: avoid "include/" in include path
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Alistair Francis d3c348b6e3 xilinx_spips: Use memset instead of a for loop to zero registers
Use memset() instead of a for loop to zero all of the registers.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c076e907f355923864cb1afde31b938ffb677778.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:26 +00:00
Alistair Francis 4f0da466ca xilinx_spips: Set all of the reset values
Following the ZynqMP register spec let's ensure that all reset values
are set.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 19836f3e0a298b13343c5a59c87425355e7fd8bd.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:26 +00:00
Alistair Francis cbf8b991f8 xilinx_spips: Update the QSPI Mod ID reset value
Update the reset value to match the latest ZynqMP register spec.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c03e51d041db7f055596084891aeb1e856e32b9f.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:26 +00:00
Francisco Iglesias c95997a39d xilinx_spips: Add support for the ZynqMP Generic QSPI
Add support for the Zynq Ultrascale MPSoc Generic QSPI.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-13-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Francisco Iglesias 2e1cf2c968 xilinx_spips: Don't set TX FIFO UNDERFLOW at cmd done
Don't set TX FIFO UNDERFLOW interrupt after transmitting the commands.
Also update interrupts after reading out the interrupt status.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-12-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Francisco Iglesias fbfaa5074c xilinx_spips: Add support for 4 byte addresses in the LQSPI
Add support for 4 byte addresses in the LQSPI and correct LQSPI_CFG_SEP_BUS.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-11-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Francisco Iglesias 275e28cccc xilinx_spips: Add support for zero pumping
Add support for zero pumping according to the transfer size register.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-10-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:22 +00:00
Francisco Iglesias 2fdd171edf xilinx_spips: Make tx/rx_data_bytes more generic and reusable
Make tx/rx_data_bytes more generic so they can be reused (when adding
support for the Zynqmp Generic QSPI).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-9-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:21 +00:00
Francisco Iglesias ef06ca3946 xilinx_spips: Add support for RX discard and RX drain
Add support for the RX discard and RX drain functionality. Also transmit
one byte per dummy cycle (to the flash memories) with commands that require
these.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-8-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:21 +00:00
Francisco Iglesias c3725b8549 xilinx_spips: Update striping to be big-endian bit order
Update striping functionality to be big-endian bit order (as according to
the Zynq-7000 Technical Reference Manual). Output thereafter the even bits
into the flash memory connected to the lower QSPI bus and the odd bits into
the flash memory connected to the upper QSPI bus.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-7-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:21 +00:00
Francisco Iglesias 5394dbcca8 xilinx_spips: Move FlashCMD, XilinxQSPIPS and XilinxSPIPSClass
Move the FlashCMD enum, XilinxQSPIPS and XilinxSPIPSClass structures to the
header for consistency (struct XilinxSPIPS is found there). Also move out
a define and remove two double included headers (while touching the code).
Finally, add 4 byte address commands to the FlashCMD enum.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-6-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:21 +00:00
Subbaraya Sundeep cda607d5e0 msf2: Remove dead code reported by Coverity
Fixed incorrect frame size mask, validated maximum frame
size in spi_write and removed dead code.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1508898544-10307-1-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-31 11:50:51 +00:00
Subbaraya Sundeep 268ee7deb4 msf2: Add Smartfusion2 SPI controller
Modelled Microsemi's Smartfusion2 SPI controller.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170920201737.25723-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21 16:36:56 +01:00
KONRAD Frederic 83c3a1f616 xlnx-qspi: add a property for mmio-execution
This adds mmio-exec property to workaround the migration bug.
When enabled the migration is blocked and will return an error.

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1502438052-5117-1-git-send-email-frederic.konrad@adacore.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-14 14:17:18 +01:00
KONRAD Frederic 252b99baeb xilinx_spips: allow mmio execution
This allows to execute from the lqspi area.

When the request_ptr is called the device loads 1024bytes from the SPI device.
Then this code can be executed by the guest.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-06-27 15:09:15 +02:00
Cédric Le Goater b4cc583f02 aspeed/smc: use a modulo to check segment limits
The size of a segment is not necessarily a power of 2.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:30 +00:00
Cédric Le Goater 1a6d4fc27d aspeed/smc: handle dummies only in fast read mode
HW works fine in normal read mode with dummy bytes being set. So let's
check this case to not transfer bytes.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:29 +00:00
Cédric Le Goater ac2810defa aspeed/smc: handle dummy bytes when doing fast reads in command mode
When doing fast read, a certain amount of dummy bytes should be sent
before the read. This number is configurable in the controler CE0
Control Register and needs to be modeled using fake transfers to the
flash module.

This only supports command mode. User mode requires more work and a
possible extension of the m25p80 device model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1484751701-2646-1-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:20 +00:00
Cédric Le Goater fcdf2c5945 aspeed/smc: handle SPI flash Command mode
The Aspeed SMC controllers have a mode (Command mode) in which
accesses to the flash content are no different than doing MMIOs. The
controller generates all the necessary commands to load (or store)
data in memory.

However, accesses are restricted to the segment window assigned the
the flash module by the controller. This window is defined by the
Segment Address Register.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org
[PMM: Deleted now-unused aspeed_smc_is_usermode() function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:08 +00:00
Cédric Le Goater 087b57c993 aspeed/smc: adjust the size of the register region
The SPI controller of the AST2400 SoC has less registers. So we can
adjust the size of the memory region holding the registers depending
on the controller type. We can also remove the guest_error logging
which is useless as the range of the region is strict enough.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:08 +00:00
Cédric Le Goater d09dc5b75b aspeed/smc: unfold the AspeedSMCController array
This is getting difficult to read. Also add a 'has_dma' field for each
controller type.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:07 +00:00
Cédric Le Goater 0707b34dcb aspeed/smc: autostrap CE0/1 configuration
On the AST2500 SoC, the FMC controller flash type is fixed to SPI for
CE0 and CE1 and 4BYTE mode is autodetected for CE0.

On the AST2400 SoC, the FMC controller flash type and 4BYTE mode are
strapped with register SCU70. We use the default settings from the
palmetto-bmc machine for now.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:07 +00:00
Cédric Le Goater f248a9dbd0 aspeed/smc: rework the prototype of the AspeedSMCFlash helper routines
Change the routines prototype to use a 'AspeedSMCFlash *' instead of
'AspeedSMCState *'. The result will help in making future changes
clearer.

Also change aspeed_smc_update_cs() which uselessly loops on all slave
devices to update their status.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:07 +00:00
Cédric Le Goater 1d247bd079 aspeed/smc: remove call to aspeed_smc_update_cs() in reset function
Instead, we can simply set the irq level when unselecting the slave
devices. This change prepares ground for a subsequent cleanup of the
aspeed_smc_update_cs() routine which uselessly loops on all slaves to
update their status.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1483979087-32663-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:07 +00:00
Cédric Le Goater eafbafa32f aspeed/smc: remove call to reset in realize function
This is useless as reset will be called later on.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1483979087-32663-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:07 +00:00