When handling guest range-based IOTLB invalidation, we should decode the TG
field into the corresponding translation granule size so that we can pass
the correct invalidation range to backend. Set @granule to (tg * 2 + 10) to
properly emulate the architecture.
Fixes: d52915616c ("hw/arm/smmuv3: Get prepared for range invalidation")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210130043220.1345-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the frontend device has no space for a read the fd is removed
from polling to allow time for the guest to read and clear the buffer.
Without the call to qemu_chr_fe_accept_input(), the poll will not be
broken out of when the guest has cleared the buffer causing significant
IO delays that get worse with smaller buffers.
Buglink: https://bugs.launchpad.net/qemu/+bug/1913341
Signed-off-by: Iris Johnson <iris@modwiz.com>
Message-id: 20210130184016.1787097-1-iris@modwiz.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the Exynos 4210 UART code always reports available FIFO space
when the backend checks for buffer space. When the FIFO is disabled this
is behavior causes the backend chardev code to replace the data before the
guest can read it.
This patch changes adds the logic to report the capacity properly when the
FIFO is not being used.
Buglink: https://bugs.launchpad.net/qemu/+bug/1913344
Signed-off-by: Iris Johnson <iris@modwiz.com>
Message-id: 20210128033655.1029577-1-iris@modwiz.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander reported an issue in gic_get_current_cpu() using the
fuzzer. Yet another "deref current_cpu with QTest" bug, reproducible
doing:
$ echo readb 0xf03ff000 | qemu-system-arm -M npcm750-evb,accel=qtest -qtest stdio
[I 1611849440.651452] OPENED
[R +0.242498] readb 0xf03ff000
hw/intc/arm_gic.c:63:29: runtime error: member access within null pointer of type 'CPUState' (aka 'struct CPUState')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hw/intc/arm_gic.c:63:29 in
AddressSanitizer:DEADLYSIGNAL
=================================================================
==3719691==ERROR: AddressSanitizer: SEGV on unknown address 0x0000000082a0 (pc 0x5618790ac882 bp 0x7ffca946f4f0 sp 0x7ffca946f4a0 T0)
==3719691==The signal is caused by a READ memory access.
#0 0x5618790ac882 in gic_get_current_cpu hw/intc/arm_gic.c:63:29
#1 0x5618790a8901 in gic_dist_readb hw/intc/arm_gic.c:955:11
#2 0x5618790a7489 in gic_dist_read hw/intc/arm_gic.c:1158:17
#3 0x56187adc573b in memory_region_read_with_attrs_accessor softmmu/memory.c:464:9
#4 0x56187ad7903a in access_with_adjusted_size softmmu/memory.c:552:18
#5 0x56187ad766d6 in memory_region_dispatch_read1 softmmu/memory.c:1426:16
#6 0x56187ad758a8 in memory_region_dispatch_read softmmu/memory.c:1449:9
#7 0x56187b09e84c in flatview_read_continue softmmu/physmem.c:2822:23
#8 0x56187b0a0115 in flatview_read softmmu/physmem.c:2862:12
#9 0x56187b09fc9e in address_space_read_full softmmu/physmem.c:2875:18
#10 0x56187aa88633 in address_space_read include/exec/memory.h:2489:18
#11 0x56187aa88633 in qtest_process_command softmmu/qtest.c:558:13
#12 0x56187aa81881 in qtest_process_inbuf softmmu/qtest.c:797:9
#13 0x56187aa80e02 in qtest_read softmmu/qtest.c:809:5
current_cpu is NULL because QTest accelerator does not use CPU.
Fix by skipping the check and returning the first CPU index when
QTest accelerator is used, similarly to commit c781a2cc42
("hw/i386/vmport: Allow QTest use without crashing").
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-id: 20210128161417.3726358-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The documentation still refers to the makefile and the old sub-directory
layout. Meson works differently: tracetool output is placed into the
builddir with mangled filenames like <builddir>/trace/trace-accel_kvm.h
for the accel/kvm/ trace.h definition.
This meson setup also requires a manually-created accel/kvm/trace.h file
that #includes the <builddir>/trace/trace-accel_kvm.h file. Document
this!
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210112165859.225534-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is possible to repeat the --trace option to specify multiple
patterns. This may be preferrable to users who do not want to create a
file with a list of patterns.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210112165859.225534-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4e66c9ef64 "tracetool: add input filename and line number to
Event" forgot to add a line number and a filename argument at one
build method call site.
Traceback (most recent call last):
File "./scripts/simpletrace.py", line 261, in <module>
run(Formatter())
File "./scripts/simpletrace.py", line 236, in run
process(events, sys.argv[2], analyzer, read_header=read_header)
File "./scripts/simpletrace.py", line 177, in process
dropped_event =
Event.build("Dropped_Event(uint64_t num_events_dropped)")
TypeError: build() missing 2 required positional arguments:
'lineno' and 'filename'
Add the missing arguments.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131173415.3392-1-vr_qemu@t-online.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The -msg timestamp=on|off option controls whether a timestamp is printed
with error_report() messages. The "-msg" name suggests that this option
has a wider effect than just error_report(). The next patch extends it
to the 'log' trace backend, so rename the variable from
error_with_timestamp to message_with_timestamp.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Re-generate tracetool output when the tracetool source code changes. Use
the same approach as qapi_gen_depends and introduce a tracetool_depends
files list so meson is aware of the dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210125110958.214017-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
macro is not reset after use, so the format decoded is always the
one of the first "PRI" in the format string.
For instance:
vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, \
uint32_t flags) "dev: %p offset: %"PRIu32" \
size: %"PRIu32" flags: 0x%"PRIx32
generates:
printf("%d@%d vhost_vdpa_set_config dev: %p offset: %u size: %u \
flags: 0x%u\n", pid(), gettimeofday_ns(), dev, offset, \
size, flags)
for the "flags" parameter, we can see a "0x%u" rather than a "0x%x"
because the first macro was "PRIu32" (for offset).
In the loop, macro becomes "PRIu32PRIu32PRIx32", and c_macro_to_format()
returns always macro[3] ('u' in this case). This patch resets macro after
the format has been decoded.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210105191721.120463-3-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "simple" backend is actually more complicated to use than the "log"
backend. Update the quickstart documentation to feature the "log"
backend instead of the "simple" backend.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201216160923.722894-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a simple rST conversion of the documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace documentation section was accidentally split when the
ftrace section was introduced. Move the simpletrace-specific
documentation back into the simpletrace section.
Fixes: e64dd5efb2 ("trace: document ftrace backend")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes several compiler warnings on MacOS with Homebrew. The
git development branch for forthcoming libtasn1 4.17.0 has introduced
deprecation warnings for several macros/types that we use.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A test with sanitizers on macOS shows this error:
authz/pamacct.c:50:25: runtime error: null pointer passed as argument 1, which is declared to never be null
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/security/pam_appl.h:56:2: note: nonnull attribute specified here
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Primarily this is to pull in a fix for Win32 keycodes. The other useful
change is the removal of build timestamp from generated files which is
desirable for reproducable builds.
The make rules need updating due to slightly changed CLI syntax - more
args must now come after the command name.
6119e6e19a050df847418de7babe5166779955e4 Fix scan codes for Korean keys
685684a8404301780714e8a89a871981e7cae988 Fix argument order in output headers
b3774853042c951b200d767697285781cc59a83c Add HTML entries for Korean layout keys
8e54850d800e4697a2798fb82ac740e760f8530b Add macOS entries for Japanese keyboards
27acf0ef828bf719b2053ba398b195829413dbdd Fix win32 keycode for VK_OEM_102
317d3eeb963a515e15a63fa356d8ebcda7041a51 Add support for generating RST formatted docs pages
7381b9bfadd31c4c9e9a10b5bb5032f9189d4352 Introduce separate args for title & subtitle with docs generator
6280c94f306df6a20bbc100ba15a5a81af0366e6 keymap-gen: Name sections in pod output
df4e56f8fab65ba714ec18f4e7338a966a1620ad Add an empty meson project
16e5b0787687d8904dad2c026107409eb9bfcb95 remove buildtime from generated files
044f21dd0d4f62519aae9f1d53a026407a0b664f add header file generators
7779876a6b06755e3bb2c94ee3ded50635bcb0fa c++: add extern declaration to the generated file
0e0a317889464397d6f1ae03aad0d2ca593aab04 move CLanguageGenerator closer to CLanguageGenerator itself
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I am reading crypto related code, find some code style problems while
using checkpatch.pl to check crypto folder. Fix the error style
problems.
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The distinction between short life and long life Linux distributions
turned out to be redundant. They can both be covered in a simple way
by noting support will target the current release, and the previous
release for a period of two years or until its EOL. This rule can also
apply to the other UNIX based distros, leaving only Windows needing a
different set of rules.
This also clarifies that Debian LTS is out of scope, because the LTS
support is provided by a separate group from the main Debian maintainer
team.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update some docs and test cases to use 'on' | 'off' as the preferred
value for bool options.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -enable-fips option was added a long time ago to prevent the use of
single DES when VNC when FIPS mode is enabled. It should never have been
added, because apps are supposed to unconditionally honour FIPS mode
based on the '/proc/sys/crypto/fips_enabled' file contents.
In addition there is more to achieving FIPS compliance than merely
blocking use of certain algorithms. Those algorithms which are used
need to perform self-tests at runtime.
QEMU's built-in cryptography provider has no support for self-tests,
and neither does the nettle library.
If QEMU is required to be used in a FIPS enabled host, then it must be
built with the libgcrypt library enabled, which will unconditionally
enforce FIPS compliance in any algorithm usage.
Thus there is no need to keep either the -enable-fips option in QEMU, or
QEMU's internal FIPS checking methods.
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If you set the loaded property to true when it was already true, the
state is overwritten without freeing the old state first. Change the
set_loaded callback so that it always frees the old state (which is a
no-op if nothing was loaded) and only then load if requestsd.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qcrypto_secret_prop_set_loaded() forgets to reset secret->rawdata after
unloading a secret, which will lead to a double free at some point.
Because there is no use case for unloading an already loaded secret
(apart from deleting the whole secret object) and we know that nobody
could use this because it would lead to crashes, let's just forbid the
operation instead of fixing the unloading.
Eventually, we'll want to get rid of 'loaded' in the external interface,
but for the meantime this is more consistent with rng, which has a
similar property 'opened' that also can't be reset to false after it
became true.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of duplicating the code for user creatable objects in secret and
secret_keyring, move it to the common base clase secret_common. As the
base class is abstract, it won't become user creatable itself.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch fixes error style problems found by checkpatch.pl:
ERROR: spaces required around that '*'
ERROR: space required after that ','
ERROR: spaces required around that '|'
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the watchdog device uses its Clock input rather than being
passed the value of system_clock_scale at creation time, we can
remove the hack where we reset the STELLARIS_SYS at board creation
time to force it to set system_clock_scale. Instead it will be reset
at the usual point in startup and will inform the watchdog of the
clock frequency at that point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-26-peter.maydell@linaro.org
Message-id: 20210121190622.22000-26-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now no users are setting the frq properties on the CMSDK timer,
dualtimer, watchdog or ARMSSE SoC devices, we can remove the
properties and the struct fields that back them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-25-peter.maydell@linaro.org
Message-id: 20210121190622.22000-25-peter.maydell@linaro.org
Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC device:
these properties are unused now that the devices rely on their Clock
inputs instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-24-peter.maydell@linaro.org
Message-id: 20210121190622.22000-24-peter.maydell@linaro.org
Use the MAINCLK Clock input to set the system_clock_scale variable
rather than using the mainclk_frq property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210128114145.20536-23-peter.maydell@linaro.org
Message-id: 20210121190622.22000-23-peter.maydell@linaro.org
Now that the CMSDK APB watchdog uses its Clock input, it will
correctly respond when the system clock frequency is changed using
the RCC register on in the Stellaris board system registers. Test
that when the RCC register is written it causes the watchdog timer to
change speed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-22-peter.maydell@linaro.org
Message-id: 20210121190622.22000-22-peter.maydell@linaro.org
Switch the CMSDK APB watchdog device over to using its Clock input;
the wdogclk_frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-21-peter.maydell@linaro.org
Message-id: 20210121190622.22000-21-peter.maydell@linaro.org
Switch the CMSDK APB dualtimer device over to using its Clock input;
the pclk-frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-20-peter.maydell@linaro.org
Message-id: 20210121190622.22000-20-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Switch the CMSDK APB timer device over to using its Clock input; the
pclk-frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-19-peter.maydell@linaro.org
Message-id: 20210121190622.22000-19-peter.maydell@linaro.org
Create and connect the Clock input for the watchdog device on the
Stellaris boards. Because the Stellaris boards model the ability to
change the clock rate by programming PLL registers, we have to create
an output Clock on the ssys_state device and wire it up to the
watchdog.
Note that the old comment on ssys_calculate_system_clock() got the
units wrong -- system_clock_scale is in nanoseconds, not
milliseconds. Improve the commentary to clarify how we are
calculating the period.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-18-peter.maydell@linaro.org
Message-id: 20210121190622.22000-18-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Convert the SSYS code in the Stellaris boards (which encapsulates the
system registers) to a proper QOM device. This will provide us with
somewhere to put the output Clock whose frequency depends on the
setting of the PLL configuration registers.
This is a migration compatibility break for lm3s811evb, lm3s6965evb.
We use 3-phase reset here because the Clock will need to propagate
its value in the hold phase.
For the moment we reset the device during the board creation so that
the system_clock_scale global gets set; this will be removed in a
subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-17-peter.maydell@linaro.org
Message-id: 20210121190622.22000-17-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a fixed-frequency Clock object to be the SYSCLK, and wire it
up to the devices that require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-14-peter.maydell@linaro.org
Message-id: 20210121190622.22000-14-peter.maydell@linaro.org
The old-style convenience function cmsdk_apb_timer_create() for
creating CMSDK_APB_TIMER objects is used in only two places in
mps2.c. Most of the rest of the code in that file uses the new
"initialize in place" coding style.
We want to connect up a Clock object which should be done between the
object creation and realization; rather than adding a Clock* argument
to the convenience function, convert the timer creation code in
mps2.c to the same style as is used already for the watchdog,
dualtimer and other devices, and delete the now-unused convenience
function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-13-peter.maydell@linaro.org
Message-id: 20210121190622.22000-13-peter.maydell@linaro.org
Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices. The old property-based clock frequency setting
will remain in place until conversion is complete.
This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-12-peter.maydell@linaro.org
Message-id: 20210121190622.22000-12-peter.maydell@linaro.org
While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provide both at once. We want the final name of the main
input Clock to be "MAINCLK", following the hardware name.
Unfortunately creating an input Clock with a name X creates an
under-the-hood QOM property X; for "MAINCLK" this clashes with the
existing UINT32 property of that name.
Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the
MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be
deleted.
Commit created with:
perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-11-peter.maydell@linaro.org
Message-id: 20210121190622.22000-11-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the
wdogclk-frq property to using the Clock once all the users of this
device have been converted to wire up the Clock.
This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1, lm3s811evb, lm3s6965evb.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-10-peter.maydell@linaro.org
Message-id: 20210121190622.22000-10-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_DUALTIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.
We take the opportunity to correct the name of the clock input to
match the hardware -- the dual timer names the clock which drives the
timers TIMCLK. (It does also have a 'pclk' input, which is used only
for the register and APB bus logic; on the SSE-200 these clocks are
both connected together.)
This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-9-peter.maydell@linaro.org
Message-id: 20210121190622.22000-9-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.
Since the device doesn't already have a doc comment for its "QEMU
interface", we add one including the new Clock.
This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-8-peter.maydell@linaro.org
Message-id: 20210121190622.22000-8-peter.maydell@linaro.org
