This patch *doesn't* update all of the docstring standards across the
QEMU package directory to make our docstring usage consistent. It
*doesn't* fix the formatting to make it look pretty or reasonable in
generated output. It *does* fix a few small instances where Sphinx would
emit a build warning because of malformed ReST -- If we built our Python
docs with Sphinx.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
For reasons that at-present escape me, pipenv insists on creating a stub
pyproject.toml file. This file is a nuisance, because its mere presence
changes the behavior of various tools.
For instance, this stub file will cause "pip install --user -e ." to
fail in spectacular fashion with misleading errors. "pip install -e ."
works okay, but for some reason pip does not support editable installs
to the user directory when using PEP517.
References:
https://github.com/pypa/pip/pull/9990https://github.com/pypa/pip/issues/7953
As outlined in ea1213b7cc, it is still too early for us to consider
moving to a PEP-517 exclusive package. We must support older
distributions, so squash the annoyance for now. (Python 3.6 shipped Dec
2016, PEP517 support showed up in pip sometime in 2019 or so.)
Add 'pyproject.toml' to the 'make clean' target, and also delete it
after every pipenv invocation issued by the Makefile.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update for visual parity with all the remaining targets.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update for visual parity with the other targets.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is a *third* way to run the Python tests. Unlike the first two
(check-pipenv, check-tox), this version does not require any specific
interpreter version -- making it a lot easier to tell people to run it
as a quick smoketest prior to submission to GitLab CI.
Summary:
Checked via GitLab CI:
- check-pipenv: tests our oldest python & dependencies
- check-tox: tests newest dependencies on all non-EOL python versions
Executed only incidentally:
- check-dev: tests newest dependencies on whichever python version
('make check' does not set up any environment at all, it just runs the
tests in your current environment. All four invocations perform the
exact same tests, just in different execution environments.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-12-jsnow@redhat.com
[Maintainer edit: added .dev-venv/ to .gitignore. --js]
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I missed the 'check-tox' target. Add that, but split the large .PHONY
specifier at the top into its component pieces and move them near the
targets they describe so that they're much harder to forget to update.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move it up near the check-pipenv help text, and update it to suggest parity.
(At the time I first added it, I wasn't sure if I would be keeping it,
but I've come to appreciate it as it has actually helped uncover bugs I
would not have noticed without it. It should stay.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Well, Cleber was right, this is a better name.
In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.
Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.
Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's not encouraged, but it's legitimate to want to know how to do.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Clarifying a few points; removing the reference to 'setuptools' because
it isn't referenced anywhere else in this document and doesn't really
provide any useful information to a Python newcomer.
Adjusting the language elsewhere to be less ambiguous and have fewer
run-on sentences.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.
The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.
Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.
(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Pylint updated to 2.9.0 upstream, adding new warnings for things that
re-use the 'err' variable. Luckily, this only breaks the
python-check-tox job, which is allowed to fail as a warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmDbap8ACgkQTeGvMW1P
Denz9wf9GtU4z7G0pQpFlv1smWPvQfv9qlkGiRvGcIQjEgPjcKjEsJC1CqtG6nZ5
BGYzey706iM7NAs6wPkyUyHgWXl+N/Ku5nNBvNJuzTN5J9aHgnqehe8civvS6ONU
0WtAQEEZCLu0Qbvw6KawCShXrJ6Jpmu+bYGggYEy5+baumLF0Qj50l2wRiDbImNu
rE3iZuhEenwnNNSTTkyt2RT8lSzizAtth4bAqzl3Zw1Q3NO+qDCL0wPOWD7YuD8p
LTZ8/ojB1+YUI3JrMM4MlzbJyGstdk2Y5zq6QpAcf86agaaFEmS0iqjOic52ImpL
VzmZZZ0W7kmhJVc5H/Q5y/KAFIHnFA==
=efjI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging
hw/nvme patches
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
# gpg: Signature made Tue 29 Jun 2021 19:46:55 BST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* remotes/nvme/tags/nvme-next-pull-request: (23 commits)
hw/nvme: add 'zoned.zasl' to documentation
hw/nvme: fix pin-based interrupt behavior (again)
hw/nvme: fix missing check for PMR capability
hw/nvme: documentation fix
hw/nvme: fix endianess conversion and add controller list
Partially revert "hw/block/nvme: drain namespaces on sq deletion"
hw/nvme: reimplement format nvm to allow cancellation
hw/nvme: reimplement zone reset to allow cancellation
hw/nvme: reimplement the copy command to allow aio cancellation
hw/nvme: add dw0/1 to the req completion trace event
hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_check
hw/nvme: remove assert from nvme_get_zone_by_slba
hw/nvme: save reftag when generating pi
hw/nvme: reimplement dsm to allow cancellation
hw/nvme: add nvme_block_status_all helper
hw/nvme: reimplement flush to allow cancellation
hw/nvme: default for namespace EUI-64
hw/nvme: namespace parameter for EUI-64
hw/nvme: fix csi field for cns 0x00 and 0x11
hw/nvme: add param to control auto zone transitioning to zone state closed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>
Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.
The correct implementation is to write to the destination variable
and don't have the extra read in the override.
Remove the unused arguments from gen_store_conditional[48]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>
Y4_l2fetch == l2fetch(Rs32, Rt32)
Y5_l2fetch == l2fetch(Rs32, Rtt32)
The semantics for these instructions are present, but the encodings
are missing.
Note that these are treated as nops in qemu, so we add overrides.
Test case added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>
Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmDZ3eAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV88Zgf/VZd2H9Wm3zUmV8VX
u9IlGuG1GROnMA8w+XakKrjKKuRdE/y3tm9vy1cGtYvekrcrHJcQpjouya6hNhWz
isqStmRDMiSLZ5kPdrnIaJ3+TOmUcp+ZXdxtsW6iZgO/knOeGFxbeZ35kG/6gmvN
AYYegK0vOmCD+Bh9QtlHItDvmCXGQQxWnjlLkRatA0HEoXHLI1r7W3oxCxFF9Hu9
3w/Tvp8rbK7oyVHCVb1ULCTJj4cwl8ZAN/509lUGy9FSZwcLKTi45k0EgAw+yuE8
3HZoON6ZyjvC++cUFJbArJGUEY78QIJWGdtMl1yIJh3V+Jp/shSaKRWSwN7p8kGf
QfVa8Q==
=XV4L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-axp-20210628' into staging
Fixes for NetBSD/alpha:
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
# gpg: Signature made Mon 28 Jun 2021 15:34:08 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-axp-20210628:
target/alpha: Honor the FEN bit
pc-bios: Update the palcode-clipper image
hw/alpha: Provide a PCI-ISA bridge device node
hw/alpha: Provide console information to the PALcode at start-up
hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jakub noticed[1] that, when using pin-based interrupts, the device will
unconditionally deasssert when any CQEs are acknowledged. However, the
pin should not be deasserted if other completion queues still holds
unacknowledged CQEs.
The bug is an artifact of commit ca247d3509 ("hw/block/nvme: fix
pin-based interrupt behavior") which fixed one bug but introduced
another. This is the third time someone tries to fix pin-based
interrupts (see commit 5e9aa92eb1 ("hw/block: Fix pin-based interrupt
behaviour of NVMe"))...
Third time's the charm, so fix it, again, by keeping track of how many
CQs have unacknowledged CQEs and only deassert when all are cleared.
[1]: <20210610114624.304681-1-jakub.jermar@kernkonzept.com>
Cc: qemu-stable@nongnu.org
Fixes: ca247d3509 ("hw/block/nvme: fix pin-based interrupt behavior")
Reported-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Qiang Liu reported that an access on an unknown address is triggered in
memory_region_set_enabled because a check on CAP.PMRS is missing for the
PMRCTL register write when no PMR is configured.
Cc: qemu-stable@nongnu.org
Fixes: 75c3c9de96 ("hw/block/nvme: disable PMR at boot up")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/362
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In the documentation of the '-detached' param "be" and "not" has been
used side by side, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the controller identifiers list CNS 0x13, available list of ctrls
in NVM Subsystem that may or may not be attached to namespaces.
In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion
for the nsid field.
These two CNS values shows affect when there exists a Subsystem.
Added condition if there is no Subsystem return invalid field in
command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This partially reverts commit 98f84f5a4e.
Since all "multi aio" commands are now reimplemented to properly track
the nested aiocbs, we can revert the "hack" that was introduced to make
sure all requests we're properly drained upon sq deletion.
The revert is partial since we keep the assert that no outstanding
requests remain on the submission queue after the explicit cancellation.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with broadcast format are
submitted anonymously (no aiocb reference saved from the blk_aio call).
Fix this by formatting the namespaces one after another, saving a
reference to the aiocb for each.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with zone reset are submitted
anonymously (no reference saved to the aiocb from the blk_aio call).
Fix this by resetting the zones one after another, saving a reference to
the aiocb for each reset.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Before this patch the code would issue several aios simultaneously
without saving a reference to the aiocb. Without the aiocb reference the
individual copies cannot be canceled.
Fix this by issuing copies of the ranges one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Some commands report additional useful information in dw0 and dw1 of the
completion queue entry.
Add them to the trace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The nvme_check_prinfo() and nvme_dif_check() functions operate on the
16 bit "control" member of the NvmeCmd. These functions do not otherwise
operate on an NvmeCmd or an NvmeRequest, so change them to expect the
actual 4 bit PRINFO field and add constants that work on this field as
well.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Make nvme_get_zone_by_slba() return NULL if the slba is out of range.
This allows the function to be used without guarding the call with a
call to nvme_check_bounds(), in preparation for the next patch.
Add asserts after calling nvme_get_zone_by_slba() instead.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prepare nvme_dif_pract_generate_dif() and nvme_dif_check() to be
callable in smaller increments by making the reftag a pointer parameter
updated by the function.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a loop was used to issue multiple "fire and forget"
aios for each range in the command. Without a reference to the aiocb
returned from the blk_aio_pdiscard calls, the aios cannot be canceled.
Fix this by processing the ranges one after another.
As a bonus, this fixes how metadata is cleared (i.e. we only zero it out
if the data was succesfully discarded).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Pull the gist of nvme_check_dulbe() into a helper function. This is in
preparation for dsm refactoring.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a broadcast flush would result in submitting
multiple "fire and forget" aios (no reference saved to the aiocbs
returned from the blk_aio_flush calls).
Fix this by issuing the flushes one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
On machines with version > 6.0 replace a missing EUI-64 by a generated
value.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
The EUI-64 field is the only identifier for NVMe namespaces in UEFI device
paths. Add a new namespace property "eui64", that provides the user the
option to specify the EUI-64.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
As per the TP 4056d Namespace types CNS 0x00 and CNS 0x11
CSI field shouldn't use but it is being used for these two
Identify command CNS values, fix that.
Remove 'nvme_csi_has_nvm_support()' helper as suggested by
Klaus we can safely assume NVM command set support for all
namespaces.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In the Zoned Namespace Command Set Specification, chapter
2.5.1 Managing resources
"The controller may transition zones in the ZSIO:Implicitly Opened state
to the ZSC:Closed state for resource management purposes."
The word may in this sentence means that automatically transitioning
an implicitly opened zone to closed is completely optional.
Add a new parameter so that the user can control if this automatic
transitioning should be performed or not.
Being able to control this can help with verifying that e.g. a user-space
program behaves properly even without this optional ZNS feature.
The default value is set to true, in order to not change the existing
behavior.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
[k.jensen: moved parameter to controller]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently LBAF formats are being intialized based on metadata
size if and only if nvme-ns "ms" parameter is non-zero value.
Since FormatNVM command being supported device parameter "ms"
may not be the criteria to initialize the supported LBAFs.
And make LBAF array as read-only.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add enums for the Identify Namespace FLBAS and MC fields.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: squashed separate flbas/mc commits into one]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
-----BEGIN PGP SIGNATURE-----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=JXBO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-06-25' into staging
block: Make block-copy API thread-safe
# gpg: Signature made Fri 25 Jun 2021 13:40:24 BST
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-jobs-2021-06-25:
block-copy: atomic .cancelled and .finished fields in BlockCopyCallState
block-copy: add CoMutex lock
block-copy: move progress_set_remaining in block_copy_task_end
block-copy: streamline choice of copy_range vs. read/write
block-copy: small refactor in block_copy_task_entry and block_copy_common
co-shared-resource: protect with a mutex
progressmeter: protect with a mutex
blockjob: let ratelimit handle a speed of 0
block-copy: let ratelimit handle a speed of 0
ratelimit: treat zero speed as unlimited
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit is used by NetBSD for lazy fpu migration.
Tested-by: Jason Thorpe <thorpej@me.com>
Reported-by: Jason Thorpe <thorpej@me.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/438
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>