Commit Graph

2132 Commits

Author SHA1 Message Date
Alex Bennée 39d87c8c0c configure: detect and report genisoimage
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
2020-03-04 09:57:33 +00:00
Juan Quintela 3a67848134 configure: Enable test and libs for zstd
Add it to several build systems to make testing good.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:24:43 +01:00
Alexander Bulekov adc28027ff fuzz: add configure flag --enable-fuzzing
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-19-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22 08:26:48 +00:00
Philippe Mathieu-Daudé e10ee3f567 configure: Avoid compiling system tools on user build by default
User-mode does not need the system tools. Do not build them by
default if the user specifies --disable-system.

This disables building the following binaries on a user-only build:

- elf2dmp
- qemu-edid
- qemu-ga
- qemu-img
- qemu-io
- qemu-nbd
- ivshmem-client
- ivshmem-server

The qemu-user binaries are not affected by this change.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200217133327.25144-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-19 11:17:40 +01:00
Laurent Vivier d599938af1 configure: linux-user doesn't need neither fdt nor slirp
if softmmu is not enabled, we disable by default fdt and
slirp as they are only used by -softmmu targets.

A side effect is the git submodules are not cloned
if they are not needed.

Clone and build can be forced with --enable-fdt and
--enable-slirp.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190621130544.18860-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-19 11:17:40 +01:00
Peter Maydell 9ced5c7c20 QAPI patches for 2020-02-15
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl5Hy4wSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTTygP/3Oaqnsye6AvJZ5UOxSmh5hMQ8Q10AL7
 HVulvQbWhbNfdRPT8maYIfES/EIsUNXmH7DGvXoh4vlhTiRUzECJM02PbehHyZaV
 cv9xQG5dcRUHnACB4YeJ6htLGIcuENhFbjOzm8alYtSlsvEvnVgdZkeBlU6X6xdr
 EuZ2L3FhLUE6kZ9+eyzFUQuFENnopakwEBzSJ3Zx9XQz8Stav8uDcP5n2N2Mot3f
 7x/MIrFTmY1Zs8Vg9KhLi9+uWwj0JnWKGJdsfEnl61hf5SelKWwLmMp+UasNNCm8
 jdHQBsV3qEYEUCwiM4CpQ/jHVypAXWNJKjsJl2GpPRjpH73/8DHX+0suNmIF3WRk
 25MtcFip+1AbinPb2U3h/huJ20S6/aYamtnuAUSaNFd0Dx3pv5Boi/J7BAKPmY63
 z4teyJ6NfjU8Iy8dtu28GfacnF/85ydOYYCkTpCJYe2EIBLZTTWSg7NHMNb2vwG9
 MlnVZeo42HUn8mKC8mXhFzgBNc6pjw/8VX2Nw6nj66Xw/3IkJZMi3k9E6zfQEDxm
 GEDPZ3nB058iZ4WdLQ8nQdlvlBlhSbYsVvs1m+uSpjZwC4G7Qq4jRB/c/r/05gwS
 SRX8rvqx9Ho0Qui3qlJ49iwZod6sIqEcGPVRJjWsA/5afpJO95EPCJ/+/Vu1gJUV
 qjyuuCGdjXFU
 =UwrK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-02-15' into staging

QAPI patches for 2020-02-15

# gpg: Signature made Sat 15 Feb 2020 10:44:28 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-02-15:
  qapi: Delete all the "foo: dropped in n.n" notes
  qapi/migration.json: Replace _this_ with *this*
  qapi: Add blank lines before bulleted lists
  qapi: Use explicit bulleted lists
  qapi/ui.json: Avoid `...' Texinfo style quoting
  qapi/ui.json: Put input-send-event body text in the right place
  qapi: Remove hardcoded tabs
  qapi: Fix indent level on doc comments in json files
  qapi: Fix incorrect "Not documented" claims in QMP documentation
  qapi/block-core.json: Use literal block for ascii art
  qga/qapi-schema.json: minor format fixups for rST
  qga/qapi-schema.json: Fix indent level on doc comments
  qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
  Makefile: Fix typo in dependency list for interop manpages
  configure: Check that sphinx-build is using Python 3
  configure: Pick sphinx-build-3 when available
  configure: Allow user to specify sphinx-build binary
  qapi: Expand documentation for LostTickPolicy

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-16 21:15:26 +00:00
Peter Maydell 758b617af8 configure: Check that sphinx-build is using Python 3
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails.  This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.

Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.

Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:

Warning: sphinx-build exists but it is either too old or uses too old a Python version

ERROR: User requested feature docs
       configure was not able to find it.
       Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx

(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:49 +01:00
Markus Armbruster 903458c8ab configure: Pick sphinx-build-3 when available
The next commit will require a sphinx-build that uses Python 3.  On
some systems, sphinx-build is fine, on others you need to use
sphinx-build-3.  To keep things working out of the box on both kinds
of systems, try sphinx-build-3, then sphinx-build.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <87a75lqe8e.fsf@dusky.pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-15 11:41:37 +01:00
Peter Maydell 971b2a1e5b RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
 avoid the Goldfish stuff getting buried as the next PR should contain the H
 extension implementation.
 
 As far as this PR goes, it contains:
 
 * The addition of syscon device tree nodes for reboot and poweroff, which
   allows Linux to control QEMU without an additional driver.  The existing
   device was already compatible with the syscon interface.
 * A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
   for rv32id-based systems.
 * A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
 * The addition of the Goldfish RTC device to the RISC-V virt board.
 
 This passes "make check" and boots buildroot for me.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl5ByuQTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYid5gD/44YscK7P2tcFl+yDPJkUNV1Hja7iRM
 K14kuSHw2UoZ4DwQ69pmBJekrMDKHiI3HltXk51xLA6tQ9geubt6BAlwUeJfuIJQ
 DC9f9cN4x5OsJQZaFXcelR1vfpGntqQuKU6SXNHYTUTCL3fOEgpxaFm89pDevvxI
 Rvalg3OLrx4uAfjlllkpzKtcRjdytq08QJ8H6F0VbFY+uAwYosfxhst4M29XCLdA
 ESHqL8IgXNWcownIsx6cYwNkjOC7hE1vYwBjxbyLY85Y8frijnbB6JwVXH1YQWPz
 lTfCDCmBwBt7z5W16djZiib6A3Nlb7UMmOXuMFVWa9j6fECwCtC3Huvg80ofVtHB
 FBO03mT1FrElTZ5unJInTx8gQX2dHaDF8v6rEzYTeroaAbdexX401boWPKUYoqhR
 kDcdcAx4EsNfBOVQc40jAEyLHEs3yZ81os8G1H/ZafW2yj2Sob9NNvV57v8moVdp
 nZ+B4NNXrK+/lASnuW0eoIAcExTjhA9WDztacJR5mafTw4RmeIkbRrNPsekn8cHb
 FjaMFgA4+r44cUYMjuLO2zx20y3fCCmYUFP9heBbsvRhkTy0VMvMbt9B2zIY1v8n
 IQgVvqcrN9Epxvq+8vgC842p3TJii0KaAiF/YLZ1nHAfxRI1ax8gXDP3ak2abs0a
 xjC5FaAaeE0VRw==
 =D4dQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 2

This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.

As far as this PR goes, it contains:

* The addition of syscon device tree nodes for reboot and poweroff, which
  allows Linux to control QEMU without an additional driver.  The existing
  device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
  for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.

This passes "make check" and boots buildroot for me.

# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg:                using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41
#      Subkey fingerprint: 2B3C 3747 4468 43B2 4A94  3A7A 2E13 19F3 5FBB 1889

* remotes/palmer/tags/riscv-for-master-5.0-sf2:
  MAINTAINERS: Add maintainer entry for Goldfish RTC
  riscv: virt: Use Goldfish RTC device
  hw: rtc: Add Goldfish RTC device
  riscv: Separate FPU register size from core register size in gdbstub [v2]
  riscv/virt: Add syscon reboot and poweroff DT nodes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-14 18:37:11 +00:00
Peter Maydell 2eb054c237 configure: Allow user to specify sphinx-build binary
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-14 16:31:21 +01:00
Paolo Bonzini 4cc600d229 build: move TARGET_GPROF to config-host.mak
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12 16:29:27 +01:00
Keith Packard ae4a70c071
riscv: Separate FPU register size from core register size in gdbstub [v2]
The size of the FPU registers is dictated by the 'f' and 'd' features,
not the core processor register size. Processors with the 'd' feature
have 64-bit FPU registers. Processors without the 'd' feature but with
the 'f' feature have 32-bit FPU registers.

Signed-off-by: Keith Packard <keithp@keithp.com>
[Palmer: This requires manually triggering a rebuild of
riscv32-softmmu/gdbstub-xml.c]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-10 12:01:36 -08:00
Thomas Huth 4f67366e3b configure: Fix typo of the have_afalg variable
The variable is called 'have_afalg' and not 'hava_afalg'.

Fixes: f0d92b56d8 ('introduce some common functions for af_alg backend')
Message-Id: <20200203160046.23194-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04 09:01:31 +01:00
Aarushi Mehta c10dd8565d configure: permit use of io_uring
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-2-stefanha@redhat.com
Message-Id: <20200120141858.587874-2-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 20:59:41 +00:00
Peter Maydell 760df0d121 * Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
 * virtio-scsi fix (Pan Nengyuan)
 * Tweak Skylake-v3 model id (Kashyap)
 * x86 UCODE_REV support and nested live migration fix (myself)
 * Advisory mode for pvpanic (Zhenwei)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
 uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
 +a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
 myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
 uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
 ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
 =TD0Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)

# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
  build-sys: clean up flags included in the linker command line
  target/i386: Add the 'model-id' for Skylake -v3 CPU models
  qdev: use object_property_help()
  qapi/qmp: add ObjectPropertyInfo.default-value
  qom: introduce object_property_help()
  qom: simplify qmp_device_list_properties()
  vl: print default value in object help
  qdev: register properties as class properties
  qdev: move instance properties to class properties
  qdev: rename DeviceClass.props
  qdev: set properties with device_class_set_props()
  object: return self in object_ref()
  object: release all props
  object: add object_class_property_add_link()
  object: express const link with link property
  object: add direct link flag
  object: rename link "child" to "target"
  object: check strong flag with &
  object: do not free class properties
  object: add object_property_set_default
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27 09:44:04 +00:00
Paolo Bonzini db5adeaa84 build-sys: clean up flags included in the linker command line
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it.  Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS.  All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).

So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:

1) options that are already in CFLAGS, for example "-g"

2) duplicate options

At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options.  For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).

Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:17 +01:00
Philippe Mathieu-Daudé 7ba4a4d328 configure: Do not build libfdt if not required
We only require libfdt for system emulation, in a small set
of architecture:

4077  # fdt support is mandatory for at least some target architectures,
4078  # so insist on it if we're building those system emulators.
4079  fdt_required=no
4080  for target in $target_list; do
4081    case $target in
4082      aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
4083        fdt_required=yes

Do not build libfdt if we did not manually specified --enable-fdt,
or have one of the platforms that require it in our target list.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:08 +01:00
Jiufei Xue 8a792b034d virtiofsd: support nanosecond resolution for file timestamp
Define HAVE_STRUCT_STAT_ST_ATIM to 1 if `st_atim' is member of `struct
stat' which means support nanosecond resolution for the file timestamp
fields.

Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23 16:41:37 +00:00
Aleksandar Markovic db37dd89d6 configure: Detect kcov support and introduce CONFIG_KCOV
kcov is kernel code coverage tracing tool. It requires kernel 4.4+
compiled with certain kernel options.

This patch checks if kcov header "sys/kcov.h" is present on build
machine, and stores the result in variable CONFIG_KCOV, meant to
be used in linux-user code related to the support for three ioctls
that were introduced at the same time as the mentioned header
(their definition was a part of the first version of that header).

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1579214991-19602-11-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-01-22 15:14:45 +01:00
Philippe Mathieu-Daudé ed5bad39e5 configure: Remove tcg/ from the preprocessor include search list
All tcg includes are relative to the repository root directory,
we can safely remove the tcg/ directory from the include search
path list.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-5-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15 15:13:10 -10:00
Thomas Huth 1cf4323ecd tests/libqos: Move the libqos files under tests/qtest/
The qos stuff belongs to qtest, so move it into that directory, too.

Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-12 11:42:41 +01:00
Thomas Huth 1e8a1fae74 test: Move qtests to a separate directory
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-12 11:42:41 +01:00
Marc-André Lureau 0dba4897be configure: check for gdbus-codegen presence
Some distros ship gdbus-codegen separately for gio headers/pc...

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200110112725.689401-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-10 12:18:09 +00:00
Marc-André Lureau 25a97a5670 configure: add GDBUS_CODEGEN
gdbus-codegen generated code requires gio-unix on Unix, so add it to
GIO libs/cflags.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-06 18:41:32 +04:00
Eduardo Habkost ddf9069963 configure: Require Python >= 3.5
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0.  Drop Python
2 support from configure completely, and require Python 3.5 or
newer.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191016224237.26180-1-ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-20 13:45:59 -03:00
Peter Maydell f59b31e6d0 Various testing and logging updates
- test tci with Travis
   - enable multiarch testing in Travis
   - default to out-of-tree builds
   - make changing logfile safe via RCU
   - remove redundant tests
   - remove gtester test from docker
   - convert DEBUG_MMAP to tracepoints
   - remove hand rolled glob function
   - trigger tcg re-configure when needed
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
 KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
 iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
 LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
 F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
 V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
 cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
 =OAkV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging

Various testing and logging updates

  - test tci with Travis
  - enable multiarch testing in Travis
  - default to out-of-tree builds
  - make changing logfile safe via RCU
  - remove redundant tests
  - remove gtester test from docker
  - convert DEBUG_MMAP to tracepoints
  - remove hand rolled glob function
  - trigger tcg re-configure when needed

# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
  tests/tcg: ensure we re-configure if configure.sh is updated
  trace: replace hand-crafted pattern_glob with g_pattern_match_simple
  linux-user: convert target_munmap debug to a tracepoint
  linux-user: log page table changes under -d page
  linux-user: add target_mmap_complete tracepoint
  linux-user: convert target_mmap debug to tracepoint
  linux-user: convert target_mprotect debug to tracepoint
  travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
  docker: gtester is no longer used
  Added tests for close and change of logfile.
  Add use of RCU for qemu_logfile.
  qemu_log_lock/unlock now preserves the qemu_logfile handle.
  Add a mutex to guarantee single writer to qemu_logfile handle.
  Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
  Fix double free issue in qemu_set_log_filename().
  ci: build out-of-tree
  travis.yml: Enable builds on arm64, ppc64le and s390x
  tests/test-util-filemonitor: Skip test on non-x86 Travis containers
  tests/hd-geo-test: Skip test when images can not be created
  iotests: Skip test 079 if it is not possible to create large files
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20 14:00:49 +00:00
Paolo Bonzini bc4486fb23 ci: build out-of-tree
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those.  To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.

Based on a patch by Marc-André Lureau.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
2019-12-18 20:17:55 +00:00
Alex Bennée afc3a8f9f1 configure: allow disable of cross compilation containers
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
2019-12-18 20:17:24 +00:00
Paolo Bonzini a358bca240 build: rename CONFIG_LIBCAP to CONFIG_LIBCAP_NG
Since we are actually testing for the newer capng library, rename the
symbol to match.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:35:47 +01:00
Paolo Bonzini 95c5f2debc configure: set $PYTHON to a full path
This will make it possible to replace it in a shebang line.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:48 +01:00
Paolo Bonzini 5342204076 libvixl: remove per-target compiler flags
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.

The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:48 +01:00
Paolo Bonzini b965e8c538 build-sys: do not include Windows SLIRP dependencies in $LIBS
When including the internal SLIRP library, we should add all the libraries that
it needs for the build.  Right now they are all included by QEMU, but -liphlpapi
is not needed without slirp.  Move it from LIBS to slirp_libs.

Based on a patch by Marc-André Lureau.

Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:47 +01:00
Thomas Huth 1d4ffe8dc7 Remove the core bluetooth code
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.

I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.

Even worse for the emulated device: When running

 qemu-system-x86_64 -bt device:keyboard

QEMU crashes once you hit a key.

So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.

Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.

Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17 09:01:14 +01:00
Paolo Bonzini 7e46261368 virtfs-proxy-helper: switch from libcap to libcap-ng
virtfs-proxy-helper is the only user of libcap; everyone else is using
the simpler libcap-ng API.  Switch and remove the configure code to
detect libcap.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug: - drop remaining -lcap from Makefile
        - fix error message in configure]
Signed-off-by: Greg Kurz <groug@kaod.org>
2019-12-02 15:26:33 +01:00
Philippe Mathieu-Daudé 623ef637a2 configure: Check bzip2 is available
The bzip2 tool is not included in default installations.
On freshly installed systems, ./configure succeeds but 'make'
might fail later:

    BUNZIP2 pc-bios/edk2-i386-secure-code.fd.bz2
  /bin/sh: bzip2: command not found
  make: *** [Makefile:305: pc-bios/edk2-i386-secure-code.fd] Error 127
  make: *** Deleting file 'pc-bios/edk2-i386-secure-code.fd'
  make: *** Waiting for unfinished jobs....

Add a check in ./configure to warn the user if bzip2 is missing.

See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-3-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-11-11 14:35:41 +01:00
Philippe Mathieu-Daudé 05dfa22b5b configure: Only decompress EDK2 blobs for X86/ARM targets
The EDK2 firmware blobs only target the X86/ARM architectures.
Define the DECOMPRESS_EDK2_BLOBS variable and only decompress
the blobs when the variable exists.

See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-2-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-11-11 14:30:09 +01:00
Yuval Shaia ee108585bb configure: Check if we can use ibv_reg_mr_iova
The function reg_mr_iova is an enhanced version of ibv_reg_mr function
that can help to easly register and use guest's MRs.

Add check in 'configure' phase to detect if we have libibverbs with this
support.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190818132107.18181-2-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-11-06 12:48:41 +02:00
Peter Maydell 68d8ef4ec5 TCG Plugins initial implementation
- use --enable-plugins @ configure
   - low impact introspection (-plugin empty.so to measure overhead)
   - plugins cannot alter guest state
   - example plugins included in source tree (tests/plugins)
   - -d plugin to enable plugin output in logs
   - check-tcg runs extra tests when plugins enabled
   - documentation in docs/devel/plugins.rst
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
 KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
 ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
 KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
 Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
 5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
 V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
 =UXR/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging

TCG Plugins initial implementation

  - use --enable-plugins @ configure
  - low impact introspection (-plugin empty.so to measure overhead)
  - plugins cannot alter guest state
  - example plugins included in source tree (tests/plugins)
  - -d plugin to enable plugin output in logs
  - check-tcg runs extra tests when plugins enabled
  - documentation in docs/devel/plugins.rst

# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
  travis.yml: enable linux-gcc-debug-tcg cache
  MAINTAINERS: add me for the TCG plugins code
  scripts/checkpatch.pl: don't complain about (foo, /* empty */)
  .travis.yml: add --enable-plugins tests
  include/exec: wrap cpu_ldst.h in CONFIG_TCG
  accel/stubs: reduce headers from tcg-stub
  tests/plugin: add hotpages to analyse memory access patterns
  tests/plugin: add instruction execution breakdown
  tests/plugin: add a hotblocks plugin
  tests/tcg: enable plugin testing
  tests/tcg: drop test-i386-fprem from TESTS when not SLOW
  tests/tcg: move "virtual" tests to EXTRA_TESTS
  tests/tcg: set QEMU_OPTS for all cris runs
  tests/tcg/Makefile.target: fix path to config-host.mak
  tests/plugin: add sample plugins
  linux-user: support -plugin option
  vl: support -plugin option
  plugin: add qemu_plugin_outs helper
  plugin: add qemu_plugin_insn_disas helper
  plugin: expand the plugin_init function to include an info block
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-30 14:10:32 +00:00
Peter Maydell 4599cb953c crypto: improve performance of ciphers in XTS mode
Currently QEMU uses its own XTS cipher mode, however, this has
 relatively poor performance.
 
 Gcrypt now includes its own XTS cipher which is at least x2 faster than
 what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
 further x5-6 speed up is seen.
 
 This is essential for QEMU's LUKS performance to be viable.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAl23DdYACgkQvobrtBUQ
 T99bzQ//dEr62GzFSjfxiVu4GTvhWQ2VAg3U/Mcpp/xx3zEFX7YY6lQmBRCMtOF8
 HMPEIop50coY55SnNLtiZaesBP/QW3MgUAer4tyMxDpgMo7Xspc00duB0CZx6UCp
 I7B8/OF6J27OSnii3+49IO9b0MNQ8yG1w0NuuvhaB4Syyp3u1flV4ZKEnMDCFN2I
 jAti4UcXmMjWZxWQNe95S6nmJLXpODhHG9ie3gxTtTTZyJkwnyF0lalelj5NMFiF
 /7Smnzy3cxx3e409TlRoPlA+47ZsfxjfN7HkV9zmxdI95Bhzh1ludhtSLsVhxdfW
 1JarQT6eUjJg9GrrrQJFmofcnDKTYGFJMZnPIydtfGfdEvQH0FBs4tuZ2cgklxCo
 kPISXgbriMdB5x8QRP1b6JHRupjbfKNkD9P63Ze7+0wpn7HyDfGSPebJNNFDl1um
 5Xkj5Sv+CuA+1VqRvpcDxaRhyNDI2sFmjd6vXyMNLLEyk5XujInjXfSobXk2HozB
 wmWEn+2aVDVz58FWlI8hTnJXTDwemkpPtxAQECou98I8S6gK25Ga1Mkkg7aUoyrM
 UovsisAIcHZuDSTRVZVyVfTp02JHZaiFiQZO9rBKfAwMNYOxoFPNJkAqJoOMDY8V
 GxVrT2DRvMetFyMk3AUmlVtbR/brYkBfr0jNCuvg8PgnLZEHIJk=
 =fkwe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/crypto-luks-pull-request' into staging

crypto: improve performance of ciphers in XTS mode

Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.

Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.

This is essential for QEMU's LUKS performance to be viable.

# gpg: Signature made Mon 28 Oct 2019 15:48:38 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/crypto-luks-pull-request:
  crypto: add support for nettle's native XTS impl
  crypto: add support for gcrypt's native XTS impl
  tests: benchmark crypto with fixed data size, not time period
  tests: allow filtering crypto cipher benchmark tests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29 15:33:15 +00:00
Peter Maydell 8c68ff250a Improvements for TARGET_PAGE_BITS_VARY
Fix for TCI ld16u_i64.
 Fix for segv on icount execute from i/o memory.
 Two misc cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl23AUwdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/nLwgAgp6uXYfxu5L5gyza
 tvAPieqn/Gyn9weNuJE6ZIgti9xmhVIz8V/EH5VabXBpwaWTs8ttDinjv05BgSUm
 p6Y0Zdbv6/oERA5KNtVuPMZXUpAyFL8w4bqtkwnlp7+0t7v1AtuNH09WqZ7B/VYG
 0zMPic8n/gi9zRCnSBgToRXJrK9FBmVeJFjJEG42rLV7GBGBaTllFcWzT+EyoknO
 OigvZb6ZkNP+cAPZY4ELj2qrR+ziVMxyAMHxGQ4QiCx6QMAys+/Mf44Is8425h1/
 GRKAEtfdUgptPMWLTQkivaH9l8pe71oj44NvCCSvfkPfynXAEyYsW+epCDWAmG71
 sHbuFQ==
 =wSJn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20191028' into staging

Improvements for TARGET_PAGE_BITS_VARY
Fix for TCI ld16u_i64.
Fix for segv on icount execute from i/o memory.
Two misc cleanups.

# gpg: Signature made Mon 28 Oct 2019 14:55:08 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20191028:
  translate-all: Remove tb_alloc
  translate-all: fix uninitialized tb->orig_tb
  cputlb: Fix tlb_vaddr_to_host
  exec: Cache TARGET_PAGE_MASK for TARGET_PAGE_BITS_VARY
  exec: Promote TARGET_PAGE_MASK to target_long
  exec: Restrict TARGET_PAGE_BITS_VARY assert to CONFIG_DEBUG_TCG
  exec: Use const alias for TARGET_PAGE_BITS_VARY
  configure: Detect compiler support for __attribute__((alias))
  exec: Split out variable page size support to exec-vary.c
  cpu: use ROUND_UP() to define xxx_PAGE_ALIGN
  cputlb: ensure _cmmu helper functions follow the naming standard
  tci: Add implementation for INDEX_op_ld16u_i64

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29 08:38:04 +00:00
Daniel P. Berrangé dc2207af2d crypto: add support for nettle's native XTS impl
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.

Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-28 16:45:07 +01:00
Daniel P. Berrangé e0576942e0 crypto: add support for gcrypt's native XTS impl
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.

As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.

This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-28 16:20:28 +01:00
Emilio G. Cota 671f760b93 tests/plugin: add sample plugins
Pass arguments with -plugin=libfoo.so,arg=bar,arg=baz

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Emilio G. Cota 26fffe29c0 plugin: add API symbols to qemu-plugins.symbols
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved into plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Alex Bennée 40e8c6f48a configure: add --enable-plugins
This adds the basic boilerplate feature enable option for the build.
We shall expand it later.

[AJB: split from larger patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Emilio G. Cota 54cb65d858 plugin: add core code
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved directory and merged various fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Jonathan Behrens ab9056ff9b
target/riscv: Expose "priv" register for GDB for reads
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.

Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:29 -07:00
Richard Henderson db8aaae822 configure: Detect compiler support for __attribute__((alias))
Such support is present almost everywhere, except for Xcode 9.
It is added in Xcode 10, but travis uses xcode9 by default,
so we should support it for a while yet.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 10:26:02 +01:00
Peter Maydell 39b68bc4f1 virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
 tests for new arm/virt ACPI tables.
 
 Virtio fs support (no migration).
 A vhost-user reconnect bugfix.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
 eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
 VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
 uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
 AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
 /6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
 =+xdg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost, acpi: features, fixes, tests

ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.

Virtio fs support (no migration).
A vhost-user reconnect bugfix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: add vhost-user-fs-pci device
  virtio: add vhost-user-fs base device
  virtio: Add virtio_fs linux headers
  tests/acpi: add expected tables for arm/virt
  tests: document how to update acpi tables
  tests: Add bios tests to arm/virt
  tests: allow empty expected files
  tests/acpi: add empty files
  tests: Update ACPI tables list for upcoming arm/virt tests
  docs/specs: Add ACPI GED documentation
  hw/arm: Use GED for system_powerdown event
  hw/arm: Factor out powerdown notifier from GPIO
  hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
  hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
  hw/arm/virt: Add memory hotplug framework
  hw/acpi: Add ACPI Generic Event Device Support
  hw/acpi: Do not create memory hotplug method when handler is not defined
  hw/acpi: Make ACPI IO address space configurable
  vhost-user: save features if the char dev is closed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-17 15:30:44 +01:00
Dr. David Alan Gilbert 98fc1ada4c virtio: add vhost-user-fs base device
The virtio-fs virtio device provides shared file system access using
the FUSE protocol carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190930105135.27244-3-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05 17:43:55 -04:00
Alexey Kardashevskiy 744a928cce spapr: Stop providing RTAS blob
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-04 10:25:23 +10:00
Thomas Huth ee35e9684c configure: Remove s390 (31-bit mode) from the list of supported CPUs
On IBM Z, KVM in the kernel is only implemented for 64-bit mode, and
with regards to TCG, we also only support 64-bit host CPUs (see the
check at the beginning of tcg/s390/tcg-target.inc.c), so we should
remove s390 (without "x", i.e. the old 31-bit mode CPUs) from the
list of supported CPUs.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190928190334.6897-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30 13:51:50 +02:00
Alex Bennée daa79d9a65 configure: preserve PKG_CONFIG for subdir builds
The slirp sub-module complains about not being able to find the glib
library on cross-compiles because it is using the default pkg-config
tool (which isn't installed in our cross-build docker images).
Preserve PKG_CONFIG in our host config and pass it down to slirp.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-26 19:00:53 +01:00
Kővágó, Zoltán 49ddd7e122 paaudio: port to the new audio backend api
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 21fe8f2cf949039c8c40a0352590c593b104917d.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23 12:28:47 +02:00
James Le Cuirot 754119198d configure: Add xkbcommon configure options
This dependency is currently "automagic", which is bad for distributions.

Signed-off-by: James Le Cuirot <chewi@gentoo.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190914145155.19360-1-chewi@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-19 14:42:31 +02:00
Alex Bennée 412aeacdc7 configure: check if --no-pie is supported first
For whatever reason this doesn't trigger normally but because
compile_prog uses QEMU_CFLAGS we end up trying to build a -pie
--no-pie build which confuses compilers on some non-x86 hosts.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 14:14:32 +01:00
Paolo Bonzini 2038f8c877 tests/tcg: move configuration to a sub-shell script
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script.  The same configuration files can
also be included in Makefile and Makefile.qemu

[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
2019-09-10 14:09:00 +01:00
Alex Bennée 8480517d4c configure: clean-up container cross compile detect
The introduction of podman support inadvertently broke configure's
detect of the container support as the configure probe didn't specify
an engine type. To fix this in docker.py:

  - only (re)set USE_ENGINE if --engine is specified
  - enhance the output so docker is no longer just yes

In the configure script we can at least start cleaning up the
detecting and naming of variables. To avoid too much churn the
conversion of the various make DOCKER_foo variables has been left for
future clean-ups.

Fixes: 9459f75413
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
2019-09-10 09:38:33 +01:00
Cleber Rosa 406ab2f331 configure: more resilient Python version capture
The current approach to capture the Python version is fragile, as it
was demonstrated by a very specific build of Python 3 on Fedora 29
that, under non-interactive shells would print multiline version
information.

The (badly) stripped version output would be sent to config-host.mak,
producing bad syntax and rendering the makefiles unusable.  Now, the
Python versions is printed by configure, but only a simple (and better
controlled variable) indicating whether the build system is using
Python 2 is kept on config-host.mak.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Message-Id: <20190826155832.17427-1-crosa@redhat.com>
Reviewed-by: Tony Nguyen <tony.nguyen@bt.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-27 16:57:24 -03:00
Peter Maydell 3590b27c7a require newer glib2 to enable autofree'ing of stack variables exiting scope
* Bump minium glib2 version to 2.48
 * Convert much of the crypto code to use automatic memory free functions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAl1ec88ACgkQvobrtBUQ
 T99J+Q//VLUBXqVEqPCc9IrcV12s9dlSTh8moIe+SEXuKHQc7STczbF0aoOnsoH3
 FmgYxibhjSC/m4OQxfuwk/F9x58mXgUgsIZGfqF0rW143xVgA0XZL9ZYL/igZFYC
 k4yQ7LvmPTicoL2IzctlgkwfpjX/2YIsBZr0sRRzutrILCeXzaY2ZTPkTPAzzCmE
 yssIkNpBfq/rZAqFGNNOQs+5Jv22e5hNYFkuIOMAM6VtZD1AEU7j0SlQ6MxL5Uo1
 GxwdBDMXLnUK94ZcYjH0m/5VqsIAkOb+dg51ZCiB2Ly8TV3hZhBJxioqWca+W324
 7IfwERYGBfCUFRdx08ff5IMxo7fsIt8f9K2qYscBZPlGetOjPeJVn+HRmSs1NY96
 KnToAp53XBh7JTaTnpC3jGuUEQtQ3oqxSkjVUJttECzuS5g/RAFYYA8IPS3JaXiy
 m9VqDembXNTtLvdI4yEqYfCnjGwayDfpbM5UOoaXDreO1jBi7DjzY46KPEqWjqys
 CUXovltZSuh1x03sodqyq14hwD1f/utVlkUaBZhcZXnE1EQVm42a5pWuHhuVgYd4
 2k1tcxhy3agLcoWSSKDkeRwMQp1ShhiiSZXtumP8DAuJT1NwdaKDRlpadcirs/po
 Zf1zo7gLU/n2y3KFxkafL/AaoKF78X94+8Bo/gyoN4bnr+Db0OY=
 =adkl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/autofree-pull-request' into staging

require newer glib2 to enable autofree'ing of stack variables exiting scope

* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions

# gpg: Signature made Thu 22 Aug 2019 11:51:59 BST
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/autofree-pull-request:
  crypto: use auto cleanup for many stack variables
  crypto: define cleanup functions for use with g_autoptr
  glib: bump min required glib library version to 2.48

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 17:57:09 +01:00
Peter Maydell 8109234808 * Longstanding chardev race condition fix (Berto)
* Cleanups and tests from the Meson POC (Marc-André, myself)
 * Coalesced range cleanup (Peter)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdXX8PAAoJEL/70l94x66DkR4H/1Phk6zuTQfHISBXGACjDkFS
 kbVq2WE6gQXwqmbf/04mM/DZzsi9bCsHFlGhf7mFQoq9g2ywm7kgtjF7kiRewlqh
 YZYSLLEoEVKpZRxC8kQbbbZ/tfYDM7ejnKMPFK6ibNiiN7acuKJuY8z18OLg4PEA
 V5LfuaGPjsx98NUAuU6bHRs5ZDCL25DzBQ9pdcE5wkJ2pVJXpP6UBafN55l8Clzq
 PzuuNnP18QyuqbdRVm5YrY+0nUeDCdlU2clCC3/H9rS57Ts/z3gocs71VT8GKqIa
 ppNRg3wVADXtfql3MkpnmvZefx+QK6DguAAiKR4CtPax7Xx6WoA4DwtMKfsLHsY=
 =RwuS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Longstanding chardev race condition fix (Berto)
* Cleanups and tests from the Meson POC (Marc-André, myself)
* Coalesced range cleanup (Peter)

# gpg: Signature made Wed 21 Aug 2019 18:27:43 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  char-socket: Lock tcp_chr_disconnect() and socket_reconnect_timeout()
  main-loop: Fix GSource leak in qio_task_thread_worker()
  memory: Fix up memory_region_{add|del}_coalescing
  memory: Remove has_coalesced_range counter
  memory: Split zones when do coalesced_io_del()
  memory: Refactor memory_region_clear_coalescing
  minikconf: don't print CONFIG_FOO=n lines
  configure: remove AUTOCONF_HOST
  tests: add module loading test
  module: return success on module load
  module: use g_hash_table_add()
  configure: define CONFIG_TOOLS here
  qemu-ga: clean up TOOLS variable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 13:13:35 +01:00
Daniel P. Berrangé 00f2cfbbec glib: bump min required glib library version to 2.48
Per supported platforms doc[1], the various min glib on relevant distros is:

  RHEL-8: 2.56.1
  RHEL-7: 2.50.3
  Debian (Buster): 2.58.3
  Debian (Stretch): 2.50.3
  OpenBSD (Ports): 2.58.3
  FreeBSD (Ports): 2.56.3
  OpenSUSE Leap 15: 2.54.3
  SLE12-SP2: 2.48.2
  Ubuntu (Xenial): 2.48.0
  macOS (Homebrew): 2.56.0

This suggests that a minimum glib of 2.48 is a reasonable target.

Compared to the previous version bump in

  commit e7b3af8159
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Fri May 4 15:34:46 2018 +0100

    glib: bump min required glib library version to 2.40

This will result in us dropping support for Debian Jessie and
Ubuntu 14.04.

As per the commit message 14.04 was already outside our list
of supported build platforms and an exception was only made
because one of the build hosts used during merge testing was
stuck on 14.04.

Debian Jessie is justified to drop because we only aim to
support at most 2 major versions of Debian at any time. This
means Buster and Stretch at this time.

The g_strv_contains compat code is dropped as this API is
present since 2.44

The g_assert_cmpmem compat code is dropped as this API is
present since 2.46

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-22 10:46:34 +01:00
Peter Maydell fe066b4848 Various trivial fixes
-----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl1dKK8SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748WhUP93YZ60SfAFhFLkAexO3fJSMzzb02Zvy3
 6Q0UyR56xigESPhlfD3rPtPdMpQRnROtIsS1qWcd6x/ejKINh08xyx1HkWLfMKOn
 F1Cc43AdkSqsuEbIfYVJbL/Yz7H6SnD7B9ghV6B2S+nDnDXGMzObAb6QXUtlnMV+
 4as6pawKOLZiP0zFb+98m1as1gjjuQA/3jrQjWPfF3pzYAaBQPh/pHgDhUSVWjsi
 G7KWu4iljKio15WhhRlzKylhSD8Z4u1OD5x/3pbPnborVnOzvryWQ1hiRQ1feB/h
 NUaWs3A2KcgM54LIZN0dC4APGdPlLohwNhakaZR8EnJD9eik2kRO3JBmzorkSHua
 y0UBpNkjeIR/Cv4ayZv6NtrNFmuEJRRcusPBHg7sg0IBUtd4YdXrfE5d2tcYS3Hu
 WoZaYLME1FmbuByJFs+cQhMw88ISYvGD5PkzfkZuQC9/nM/zd6pJyRCAhgchIkfh
 G5iCtOMK8gs5xZjr22pOx/XYLFRzFsOIsGx3kcHH3vSJVS5K3QYFt2xH47YmQZHk
 1k3wQfc8ePFPFpR2rnWqg+iYbPgl8FpOsEfz4fuPRwBeRGFRRzfkpXLQ2DJww59/
 8pd2UAWgdwrvtimmykfEmTu+LUuZKwNFJNH3KfNputbBqjnv1KkbmsPqnElj3deo
 a7LJ72Z1k4Q=
 =dzAT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Various trivial fixes

# gpg: Signature made Wed 21 Aug 2019 12:19:11 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/display: Compile various display devices as common object
  hw/display/sm501: Remove unused include
  spapr_events: Rewrite a fall through comment
  vl: Rewrite a fall through comment
  target/ppc: Rewrite a fall through comment
  hw/ipmi: Rewrite a fall through comment
  hw/dma/omap_dma: Move switch 'fall through' comment to correct place
  json: Move switch 'fall through' comment to correct place
  hw/net/e1000: Fix erroneous comment
  .gitignore: ignore some vhost-user* related files
  configure: fix sdl detection using sdl2-config
  configure: remove obsoleted $sparc_cpu variable
  misc: fix naming scheme of compatiblity arrays
  test: Use g_strndup instead of plain strndup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21 16:59:22 +01:00
Marc-André Lureau fbb04e760f configure: remove AUTOCONF_HOST
This is a left-over from commit
c12b6d70e3 ("pixman: drop submodule")

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21 16:29:57 +02:00
Paolo Bonzini c932ce3144 configure: define CONFIG_TOOLS here
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage
of including it also if e.g. qemu-ga is requested.  The correct
information is available in configure, define it there.

This also has the benefit of not installing the manpages for block layer
tools if the only "tool" being built is the guest agent.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21 16:29:56 +02:00
Paolo Bonzini 0814465ab8 qemu-ga: clean up TOOLS variable
qemu-ga is included in the TOOLS variable without the .exe suffix, and this is
then worked around twice in the Makefile.  Do the right thing in configure
instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21 16:29:56 +02:00
Carlo Marcelo Arenas Belón aee8a61946 configure: fix sdl detection using sdl2-config
If SDL2 is requested but pkg-config doesn't have a module for it
configure should fallback to use sdl*-config, but wasn't able to
because and old variable (from SDL) was being used by mistake.

Correct the variable name and complete other related changes so
there are no more references to the old SDL.

Fixes: 0015ca5cba ("ui: remove support for SDL1.2 in favour of SDL2")
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190710225528.409-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 10:31:33 +02:00
Carlo Marcelo Arenas Belón edd318b7a3 configure: remove obsoleted $sparc_cpu variable
9b9c37c364 ("tcg-sparc: Assume v9 cpu always, i.e. force v8plus in
32-bit mode.", 2012-09-21) removed the need for this variable and
most of the references to it, but this one.

Remove defunct code, no effect or functionality change expected.

Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190709234330.89699-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 10:30:11 +02:00
tony.nguyen@bt.com 52bf9771fd configure: Define target access alignment in configure
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.

Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-20 17:26:19 +02:00
Peter Maydell 23da9e297b target-arm queue:
* target/arm: Add missing break statement for Hypervisor Trap Exception
    (fixes handling of SMC insn taken to AArch32 Hyp mode via HCR.TSC)
  * hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
  * target/arm: Limit ID register assertions to TCG
  * configure: Clarify URL to source downloads
  * contrib/elf2dmp: Build download.o with CURL_CFLAGS
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl01tnsZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oqrEACkTEsgLU4jkksB3suL2uCP
 6Tk2f/+uyTtVh/vCBZFnvToMJC/iII1EESID/va1R7lI8kNxx08hFC09y64OGxqJ
 GXbSU5PUYQ4iNccop9IIU/lo7MXvAXlUL83OygMdZeifRoicNE+K2DIMQrgKyiDz
 91PaCNRdZzo7b7E7ojqlDXwNeCx6d0z76a7uv0BUTaU7Cx57tYDpCGdg6AXgkFHH
 WsKvAJmGhtrNLhOV/lRZcBZzo6TfBK51TEgQrNN8/wgpzhxfxhfmhtxiRDVJpQ73
 iGMy6xeGSWbbzn73FHwIBcvz5lUWCogw0WlunTm6BBabzhGylwbj2TkaGkq5NdsE
 0eCa5v2193xV5cG+hVq5zezhaRSSOt5WgrJu84VJ7EWckYgjH/aqx3fHRLgopPXV
 W07eXZ+LA1VjLDTAPX+siN46ZDQNZ4DTr3Vw6pPlshAmO9X8QtjhOmkfsB+gHKjN
 w9TGsCXWA/2wnWJ87Ex+5p501EwF8M/EZyiK09piSj042yidpg4ChLU/zLgX2OQv
 TaZrhjHf1iqvoYpcBv5X6FPPts+EmT0c2kcXhLdg/TPS4nrO4IDj9dBTsBWYuoAN
 pQqR69xJUAses8fM81ZCIxYqhYyg+LItRcy4WT3DiysgY+R1dmKxMLsXwVQqObdb
 vSCLh6wJNdvRRTkIWtP7+w==
 =6GBN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190722' into staging

target-arm queue:
 * target/arm: Add missing break statement for Hypervisor Trap Exception
   (fixes handling of SMC insn taken to AArch32 Hyp mode via HCR.TSC)
 * hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
 * target/arm: Limit ID register assertions to TCG
 * configure: Clarify URL to source downloads
 * contrib/elf2dmp: Build download.o with CURL_CFLAGS

# gpg: Signature made Mon 22 Jul 2019 14:13:31 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190722:
  contrib/elf2dmp: Build download.o with CURL_CFLAGS
  configure: Clarify URL to source downloads
  target/arm: Limit ID register assertions to TCG
  hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
  target/arm: Add missing break statement for Hypervisor Trap Exception

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-22 15:16:48 +01:00
Peter Maydell a3e3b5217b configure: Clarify URL to source downloads
If configure detects that it's being run on a source tree which
is missing git modules, it prints an error messages suggesting
that the user downloads a correct source archive from the project
website. However https://www.qemu.org/download/ is a link to a
page with multiple tabs, with the default being the one telling
users how to get binaries from their distro. Clarify the URL
we print to include the #source anchor, so that the browser will
go directly to the source-tarball instructions.

Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190718131659.20783-1-peter.maydell@linaro.org
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-22 14:07:39 +01:00
Marc-André Lureau 21e709aa07 build-sys: do no support modules on Windows
Our module system does not support Windows, because it relies on
resolving symbols from the main executable.

If there is enough interest in supporting modules on Windows, we could
generate an import library for the executable and link with it:
https://stackoverflow.com/questions/15454968/dll-plugin-that-uses-functions-defined-in-the-main-executable

However, there is a small chicken egg problem, since the executable
link and exports extra symbols needed by the library...

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190718120413.27678-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 19:05:05 +02:00
Daniel P. Berrangé 02f9135be6 configure: only link capstone to emulation targets
Only the emulators link to code that uses capstone, so adding it to the
global LIBs places undesirable dependancies on other binaries, in
particular the tools.

There is no variable that covers both user emulation and machine
emulation, so add a new "$libs_cpu" for this purpose.

In particular this removes the 8 MB capstone dep from the things
qemu-img links against, allowing for a more minimal installation
in scenarios that don't want system emulators installed.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-19 12:52:04 +01:00
Paolo Bonzini 3cae16db02 create_config: remove $(CONFIG_SOFTMMU) hack
CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
expands to the right thing in hw/Makefile.objs.  This however is not
needed anymore and it has a corresponding hack in create_config
to turn it into "#define CONFIG_TPM 1".  Clean up.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 20:58:37 +02:00
Peter Maydell 234e256511 Build system patches for 2019-07-02
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0clRwSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTIQIP/AmCDKPfSHEk2KTnVXjNVRL0CAks10cb
 6a3ywrf5gjPjIoNTidSUenNfDMhR1CRAxtGJzWLxD9+CRcExOmVMiLP6ubScwGtk
 dS+P6jp4weRwyweRIEGcFDsdYM6ao+ONgeOIMQTvek1+A3AziFgByJFzRVgVhYk5
 AJtdOIwXY4an/A8/i3l5iugDidKsfEdZUrHCi3rnO0hCDeEG91o6iMDgHnR/Iay6
 mjSMzIGu6qfHrMgGbBNtSdrW3/k7DhmbYnVp7pkyFqJz1GcuS/fWDDzrVzFJWImD
 0ietbsG9+DfhTMYE58bObUSwWT32XzRt8mJOGLphVgIHr4PKbxeWqKc7kYXqH4Fe
 8jdLOs+l7QSm2IggYgUfT+R8pZ1iQbBiq6ErUBkttYWAG6WnOnc6qgbEafAWSgv8
 F5T0arT2zhwtpWjoWH7hHOtRn7TQzd6sBg8MLsHqPapdAaTt/8eI6Ywii9X2hl6s
 qPEBAGLkfSkh9TPK1lasCRTQ2ANWIcC1F9M6dLZT4rxpI26A9/CVBPnuGz+Xzl5G
 Pm+uRpocMzG9z/hBp4Qb9byCQlIDV8H0Vs8afY/gjh+SztzUOAUtkwDOi+FRrZIE
 2uvwPNfcstq9NMatfu0DRXSH4eYCMAv/m+uHkkIbWtHZLufCaaGqWXjAtC66b6WG
 J8FRhxNoSWuC
 =XZs0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-build-2019-07-02-v2' into staging

Build system patches for 2019-07-02

# gpg: Signature made Wed 03 Jul 2019 12:44:28 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-build-2019-07-02-v2:
  Makefile: Reuse all's recursion machinery for clean and install
  Makefile: Rename targets for make recursion
  Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.def
  Makefile: Remove code to smooth transition to config.status

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04 15:58:46 +01:00
Markus Armbruster 3b8593eeaa Makefile: Rename targets for make recursion
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).

For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively.  Behaves nicely with -j and -k.

For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop.  Ignores -j and -k.

The next commit will fix that for "clean" and "install".  This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make.  This will permit reusing them for
goals other than "all".

Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T.  Rename
to T/all, and declare phony.

Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R.  Default
goal is "all" for all R.  Rename to pc-bios/R/all, and declare phony.

The remainder are renamed just for consistency.

Target subdir-dtc runs "make libbft/libfdt.a" in dtc.  Rename to
dtc/all, and declare phony.

Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone.  Rename to capstone/all, and declare phony.

Target subdir-slirp runs "make" in $(SRC_PATH)/slirp.  Default goal is
all, which builds $(BUILD_DIR)/libslirp.a.  Rename to slirp/all, and
declare phony.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
2019-07-03 13:18:17 +02:00
Eduardo Habkost e5abf59eae Deprecate Python 2 support
Python 2 will reach end of life in January 1 2020.  Declare it as
deprecated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190503193721.18459-1-ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ehabkost: print "warning:" in lowercase]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-01 19:02:10 -03:00
Peter Maydell 7d0e02405f configure improvements and fixes
MAINTAINERS update
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl0Tz0ISHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L7480D4QAJLK8xf0fhB+RR1fcBS1lrxNWvbTkYTQ
 kptVaWUTUYYnvMQbCLsgYYtna3W1zZxhgZKMQcAy7fLzj5wOM+MjalOHLjYHFIxH
 PEYtZt4urJoj0nmZbQVjO7s3Z1Asd5Lwnu9ylCtxBvai1pGxZGNbPfnxwkDRlGP6
 q73XiA2tsi0bmbevV4q15tshJvcPo1yskxPAsNb91YnUEbsE8/09HDOezgAvB2+7
 tR5k66aNEidqtISlQcm6ct215+tRA9lz4wz5gWn5UA0AJFUmDLq96DhgrkL/+l8H
 +N9cq3lw4P+ZFG5ufKbNV1qzDEDPuU1S6xycRg/c53q/UPle9MyZkRHrm0Ml/x5g
 Ro7MkqDEx1TwhkzoMhycDPD1grUFTOP6efiys+t4Z7lWvnhp4/q6FPblaX69wBvd
 rhDRO3Du11387ByEmsYINLsvMDdlee8WqrGUSk0BYHqoSFs6QnP/YSHryRfV3zkE
 iDROxxoQKqonpLrPHTPP6Jj0j0cBR36Th5wbq0uQPYXWg27ZBe9BI09ZKOnzFSbx
 JTMJxQ9VNaBeiOUTcqsZ85PIWzwzRKvdWlQPKJEe88ARrUWY4oXe0lJ2kjR+8/Lo
 lA+CE9eQJ+t8LdwuSWe5Hb3s492J3YCG2X/i1E2TZymoP0zaeEcDWwAMBlH2YZgc
 s5XLbPqHaTDe
 =UxmJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging

configure improvements and fixes
MAINTAINERS update

# gpg: Signature made Wed 26 Jun 2019 21:02:10 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request:
  MAINTAINERS: Change maintership of Xen code under hw/9pfs
  configure: use valid args testing sem_timedwait
  configure: disallow spaces and colons in source path and build path
  configure: set source_path only once and make its definition more robust

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:40:32 +01:00
Daniel P. Berrangé 811294b796 configure: use valid args testing sem_timedwait
The sem_timedwait function has been annotated as requiring
non-null args in latest header files from GCC snapshot
representing the future 2.30 release.

This causes configure to fail when -Werror is used:

config-temp/qemu-conf.c: In function ‘main’:
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 1) [-Werror=nonnull]
    2 | int main(void) { return sem_timedwait(0, 0); }
      |                         ^~~~~~~~~~~~~
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 2) [-Werror=nonnull]

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190617114114.24897-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-26 18:27:07 +02:00
Antonio Ospite 4ace32e227 configure: disallow spaces and colons in source path and build path
The configure script breaks when the qemu source directory is in a path
containing white spaces, in particular the list of targets is not
correctly generated when calling "./configure --help" because of how the
default_target_list variable is built.

In addition to that, *building* qemu from a directory with spaces breaks
some assumptions in the Makefiles, even if the original source path does
not contain spaces like in the case of an out-of-tree build, or when
symlinks are involved.

To avoid these issues, refuse to run the configure script and the
Makefile if there are spaces or colons in the source path or the build
path, taking as inspiration what the kbuild system in linux does.

Buglink: https://bugs.launchpad.net/qemu/+bug/1817345

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-3-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-26 18:27:00 +02:00
Antonio Ospite 142118254b configure: set source_path only once and make its definition more robust
Since commit 79d77bcd36 (configure: Remove --source-path option,
2019-04-29) source_path cannot be overridden anymore, move it out of the
"default parameters" block since the word "default" may suggest that the
value can change, while in fact it does not.

While at it, only set source_path once and separate the positional
argument of basename with "--" to more robustly cover the case of path
names starting with a dash.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-2-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-26 18:26:54 +02:00
Pino Toscano b10d49d761 ssh: switch from libssh2 to libssh
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2.  The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts

Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).

Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>

Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 16:01:04 +02:00
Marc-André Lureau 7f27154d50 configure: remove tpm_passthrough & tpm_emulator
This is a left-over from commit 7aaa6a1637 "tpm: express dependencies
with Kconfig".

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190524181411.8599-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03 14:03:02 +02:00
Peter Maydell 60905286cb ppc patch queue 2019-05-29
Next pull request against qemu-4.1.  Highlights:
   * KVM accelerated support for the XIVE interrupt controller in PAPR
     guests
   * A number of TCG vector fixes
   * Fixes for the PReP / 40p machine
   * Improvements to make check-tcg test coverage
 
 Other than that it's just a bunch of assorted fixes, cleanups and
 minor improvements.
 
 This supersedes both the pull request dated 2019-05-21 and the one
 dated 2019-05-22.  I've dropped one hunk which I think may have caused
 the check-tcg failure that Peter saw (by enabling the ppc64abi32
 build, which I think has been broken for ages).  I'm not entirely
 certain, since I haven't reproduced exactly the same failure.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlzuK2AACgkQbDjKyiDZ
 s5LFfxAAuvBI2d5gYDSDiniJPMrEzM8ANynf8fYMGSySRNpeKz5PnMhNQieoxaEt
 pS9qJnnaCDrpV09jJo6QWStUaqFqnLPOYdWvRsnb7mx0yXe5eWUyYPp0TRAqKj8S
 Ainv9ma8WfhVphsH3E01KR6evdC6BDC0F2afDToFGMKcDKXafmnSOEV9ZtFAzFXO
 xqh/Az+Y2ATwDmt92uSq7JBS5YRUvhYQORoKslxnrJswKkN+Uwi5+a2FzOHk3Jwe
 BlV6soEAVqb9ItFtgwcArclryCMMVxrqzs2VTWOYbhznFX0X1xUNeSQ8H+7F+IVy
 Xu1e2fnwufvilvWSsjtYvdYnnCbNvwgWjYfZNMrQ2hmSDtCQnRKyVIYwiU08Qj2y
 LmVlQzWN3WYHIRBTACLMDf5VHa9P01QZeJEoVIV6i4m4PCxbSmlzI62eRKNhW917
 2d3h8dGIxSDm9/WpXefKMMrt2P7fAqkiz5ZUZIjkspcHaPPmk7qQp0ngFjeEuyFk
 tJMd87hgemm9gg+mcF9XQ8yZGkR3oTq7nwDGwZHrp8S0GyRvNwhTbT2iKzAG2cxe
 kfWRFswxn1zYPShqkcj3rwNsg8LnC3b22Og/obHYVjQ8ONx4ZB0q8xJSkUpvsQf5
 HEUHLHtstBmrInFMf+2KbViUIpobmn4woojjNsqZ32W7OZv6Yk4=
 =2q3B
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging

ppc patch queue 2019-05-29

Next pull request against qemu-4.1.  Highlights:
  * KVM accelerated support for the XIVE interrupt controller in PAPR
    guests
  * A number of TCG vector fixes
  * Fixes for the PReP / 40p machine
  * Improvements to make check-tcg test coverage

Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.

This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22.  I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages).  I'm not entirely
certain, since I haven't reproduced exactly the same failure.

# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
  ppc/pnv: add dummy XSCOM registers for PRD initialization
  ppc/pnv: introduce new skiboot platform properties
  spapr: Don't migrate the hpt_maxpagesize cap to older machine types
  spapr: change default interrupt mode to 'dual'
  spapr/xive: fix multiple resets when using the 'dual' interrupt mode
  docs: provide documentation on the POWER9 XIVE interrupt controller
  spapr/irq: add KVM support to the 'dual' machine
  ppc/xics: fix irq priority in ics_set_irq_type()
  spapr/irq: initialize the IRQ device only once
  spapr/irq: introduce a spapr_irq_init_device() helper
  spapr: check for the activation of the KVM IRQ device
  spapr: introduce routines to delete the KVM IRQ device
  sysbus: add a sysbus_mmio_unmap() helper
  spapr/xive: activate KVM support
  spapr/xive: add migration support for KVM
  spapr/xive: introduce a VM state change handler
  spapr/xive: add state synchronization with KVM
  spapr/xive: add hcall support when under KVM
  spapr/xive: add KVM support
  spapr: Print out extra hints when CAS negotiation of interrupt mode fails
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-30 15:08:00 +01:00
Marc-André Lureau d52c454aad contrib: add vhost-user-gpu
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.

Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Richard Henderson 3ff1075ab6 configure: Use quotes around uses of $CPU_CFLAGS
About half of the values to which CPU_CFLAGS is set
have multiple space separated arguments.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:16 +10:00
Richard Henderson f8378accda configure: Distinguish ppc64 and ppc64le hosts
We cannot use the ppc64le host compiler to build ppc64(be) guest code.
Clean up confusion between cross_cc_powerpc and cross_cc_ppc; make use
of the cflags variable as well.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-2-richard.henderson@linaro.org>
[dwg: Dropped hunk relating to ppc64abi32, it doesn't test properly]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:13 +10:00
Peter Maydell d418238dca Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
 Use qemu_guest_getrandom in target/ppc darn instruction.
 Support ARMv8.5-RNG extension.
 Support x86 RDRAND extension.
 
 Acked-by: Daniel P. Berrangé <berrange@redhat.com>
 Acked-by: Laurent Vivier <laurent@vivier.eu>
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
 OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
 ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
 P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
 /4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
 kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
 YOBmSw==
 =2RnL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging

Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>

# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-rng-20190522: (25 commits)
  target/i386: Implement CPUID_EXT_RDRAND
  target/ppc: Use qemu_guest_getrandom for DARN
  target/ppc: Use gen_io_start/end around DARN
  target/arm: Implement ARMv8.5-RNG
  target/arm: Put all PAC keys into a structure
  hw/misc/exynos4210_rng: Use qemu_guest_getrandom
  hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
  hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
  aspeed/scu: Use qemu_guest_getrandom_nofail
  linux-user: Remove srand call
  linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
  linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
  linux-user: Call qcrypto_init if not using -seed
  linux-user: Initialize pseudo-random seeds for all guest cpus
  cpus: Initialize pseudo-random seeds for all guest cpus
  util: Add qemu_guest_getrandom and associated routines
  ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
  ui/vnc: Split out authentication_failed
  crypto: Change the qcrypto_random_bytes buffer type to void*
  crypto: Use getrandom for qcrypto_random_bytes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23 12:57:17 +01:00
Richard Henderson db1ed1abcf crypto: Use getrandom for qcrypto_random_bytes
Prefer it to direct use of /dev/urandom.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson 243dc2cf95 build: Link user-only with crypto random number objects
For user-only, we require only the random number bits of the
crypto subsystem.  Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.

Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson a73e82ef91 configure: Link test before auto-enabling crypto libraries
At least ubuntu 18.04 does not package static gnutls libraries.
At least Fedora 30 does not ship static nettle and gcrypt libraries.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190510012458.22706-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:08:21 -04:00
Markus Armbruster 04c6e16f1f configure: Fix spelling of sdl-image in --help
Fixes: a442fe2f2b
Cc: qemu-trivial@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190517183246.11933-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Laurent Vivier a512590595 configure: qemu-ga is only needed with softmmu targets
Remove it from the list of tools if --disable-system
and --disable-tools are used as we don't need it for
linux-user targets.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
[lv: I also disable it with disable-tools, not only with disable-system]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-4-lvivier@redhat.com>
2019-05-17 15:19:39 +02:00
Thomas Huth bb768f71eb Makefile: Fix inclusion of the config-devices.mak.d Kconfig dependencies
The Makefile tries to include device Kconfig dependencies via

 -include $(SUBDIR_DEVICES_MAK_DEP)

and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Peter Maydell 68a7b9724f Pull request trivial branch 2019-05-03
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJczCVqAAoJEPMMOL0/L748fJgP/2egGeZwC/CwnMOf/8U27mp6
 oINuhwZ+xM4Tb7ZaOJnyJIrXL5oJNXXc3EqhVS/m+bRM5WgvszWnAMVKr4aTqj5G
 exuqrIp9SRjvWd4giWHB8rgedIWuY6B5B6T6obvpwWJV3SNiNOGUeXbcF+oyH0L9
 msp9PS4mzp/pEauBiulJOHSlqa9r/9AtP/liGp52vJ7wb6St+y1fLDlAbfPSYh6i
 XQUXy/ymR4JrEFXSH0mLXDDqpY6UW1z1PRaqoNKrr99pfvYn7M+zrVXkXBEFDLTA
 wMLiTGiOTR8P/bDhkiKCreWVsH6X93qMPS4kiAQnrT8FnDYMgKzG8rscG3a/DMZR
 1cXrSh2mckupXQTXNaT0judoUYRXEDXu7fD7PlyXmNiAT1FkRLaBHUQ243DHzZ07
 E3UD0ngsXSl5m6W3EDpGag5RlnFlyexPDDVkN3ZNPjmzStp0lOKplj24DXIz4xYf
 9CpTAiVM16MH7PUWdIkhRGXk92n5giw+pZWynA2W5F7ykWIlV1lTTPLwt55g1aev
 ExdGTOH0qQ9s96AvQtBuomUzd45DfWLdL4Ixqf13uP4Diuy5XTZS8DnRZ/HGxKRN
 hTZXFxI3sVvRcLNId/hrjH6D8+Ou6W89RA8rfL762pc7zGsaD7+n9rqZQA1sDixh
 9N0IHgrPbbLiWGbZ56vf
 =fRKG
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Pull request trivial branch 2019-05-03

# gpg: Signature made Fri 03 May 2019 12:26:34 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  sockets: avoid string truncation warnings when copying UNIX path
  hw/sparc/leon3: Allow load of uImage firmwares
  Makefile: Let the 'clean' rule remove qemu-ga.exe on Windows hosts
  net: Print output of "-net nic, model=help" to stdout instead of stderr
  Header cleanups
  Update configure
  configure: fix pam test warning
  qom: use object_new_with_type in object_new_with_propv
  doc: fix the configuration path
  CODING_STYLE: indent example code as all others
  CODING_STYLE: specify the indent rule for multiline code
  hw/net/pcnet: Use qemu_log_mask(GUEST_ERROR) instead of printf

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-09 13:36:10 +01:00
Peter Maydell a6ae23831b Python queue, 2019-05-02
* configure: automatically pick python3 is available
   (Daniel P. Berrangé)
 
 * tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
   * Multi-architecture test support
   * Multiple arch-specific boot_linux_console test cases
   * Increase verbosity of avocado by default
   * docstring improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcy43mAAoJECgHk2+YTcWm7DEQAIWbC47Ux4Mbww+RFFHGiqR0
 Add+gvRp+PiAwHFqvE/tmWXlXFefMT6igeMfUmh6Z9SX+aWclX4IHP7NBQ5XeaWp
 YPoPzh0aPft40EfI/ncN6YCSRB89knAVbJZzsBjIduVOgRhty0HLo7TcNxGOISMo
 bUFGZEq8dFJW2twDBbYOD3ho4BSSw99RcfUcqp7SrIAvOi9b6AxN30MKomqwzZlq
 gOjGqhbbOvGllNclnB1VKJOp+3e4G6TuJu//OWgroKTAZMYx0+qmcjnCH9b9noDN
 JBhnoJbYGOS53FXNiPmhgz99hjQHSwovyepfwbnqHZgdFhMWceKkV2WbtsgixOba
 NKX3DPvQgLybXOWVYGBFpPAc5WwzAgfGuXWcN3Qe6H9YdZruJJVS6ZDy4P41hqrL
 1DAsMWVInwojwYT3Q5Xuy2FwUoEFXe1aFLzMc3KB7wDq1VOs9WfvXrECxWY3bo7z
 7Ygx721vJzfheRrvLQSlK6o3TgVc9MjWdLInbXpHHZtjyfp65MahjOMUvFz/NXPk
 DObg8xn35B955QSH08QsLl/t6uHx2YoEIJyXvHNr330U4+py0Akx3bPYwupKc6ft
 6j7KNFB3w15jDE4+WRoWbwCbWfwJ3JmeZAp54rp4tT69b2+gFnCXVp4iS9ARMewo
 gO4yr84+4dmHNt/tJp3b
 =GuGy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2019-05-02

* configure: automatically pick python3 is available
  (Daniel P. Berrangé)

* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
  * Multi-architecture test support
  * Multiple arch-specific boot_linux_console test cases
  * Increase verbosity of avocado by default
  * docstring improvements

# gpg: Signature made Fri 03 May 2019 01:40:06 BST
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
  configure: automatically pick python3 is available
  tests/boot_linux_console: add a test for alpha + clipper
  tests/boot_linux_console: add a test for s390x + s390-ccw-virtio
  tests/boot_linux_console: add a test for arm + virt
  tests/boot_linux_console: add a test for aarch64 + virt
  tests/boot_linux_console: add a test for mips64el + malta
  tests/boot_linux_console: add a test for mips + malta
  scripts/qemu.py: support adding a console with the default serial device
  tests/boot_linux_console: refactor the console watcher into utility method
  tests/boot_linux_console: increase timeout
  tests/boot_linux_console: add common kernel command line options
  tests/boot_linux_console: update the x86_64 kernel
  tests/boot_linux_console: rename the x86_64 after the arch and machine
  tests/acceptance: look for target architecture in test tags first
  tests/acceptance: use "arch:" tag to filter target specific tests
  tests/acceptance: introduce arch parameter and attribute
  tests/acceptance: fix doc reference to avocado_qemu directory
  tests/acceptance: improve docstring on pick_default_qemu_bin()
  tests/acceptance: show avocado test execution by default

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	configure
2019-05-03 15:26:09 +01:00
Peter Maydell 7c8cd3468a slirp: move slirp as git submodule project
Marc-André Lureau (2):
   build-sys: pass CFLAGS & LDFLAGS to subdir-slirp
   build-sys: move slirp as git submodule project
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5h27FdQXK97JfpLZ21UOifD6VPMFAlzLbUQACgkQ21UOifD6
 VPMCjA/7BOagCW1rD/uXEYB7XJultzVt0iIRj8UgPAnVh87MO3J2xJNc1PsxxMBU
 lqXUAnXQxxkToBVLdZ9RqGuS57ywPxzXrfMaHczgatu+5/S7zaFFtFx4ZrIFYLF1
 aaXbsgqBGUOfEfHgb1wTDeF86Pe2btd7m3YSuPqUTJOV/TCQwWEBdGlglLw9twBz
 7CQn8nSSUhjKYlWOKnnuBQQ64xG5GF6bSl/Bagc5Tw7wuMxxOjktMOLdupSp5DdA
 JNesmaqJ5gFpXNzoY+Cu0tNfPcyHxzDQJ10oeEIQh1/SmpyLBlsSehC0nQcoiXuE
 mi90QENORnfbXL+k9Hgv1MLjcHgOOTEbAxQMCPzj/83yHflYE+2EMm9AsPVmUn+w
 +1CgwrkUXxO0R/uV+jAuseYqxLw5lTUktBYn6CC9UtQMtgHKtcBoMbEw+bNMnbyg
 aeYHIwCmrPTHsZSttmNfBF9PevOxbdRTbLkw/UHmFspUbbdMan4NJ92tIKJzZyq0
 3Y8jxN13duxTIMGgs4x2cCpwwtT1xd2cj5ag+oFaT8pS5nhYKv+pzaMjiTBnhkIr
 NjFrryqOritTwsOp3gtewhDLKwoSP7lHBQF1YKtGIvhXV/F+EtYkB5MmgxIEDe//
 d5uc0tQ1wgTH9nEJGZX53fEdS8X7pOnKtjDIGTp/z5BB13oYHPI=
 =+IGr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp: move slirp as git submodule project

Marc-André Lureau (2):
  build-sys: pass CFLAGS & LDFLAGS to subdir-slirp
  build-sys: move slirp as git submodule project

# gpg: Signature made Thu 02 May 2019 23:20:52 BST
# gpg:                using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: E61D BB15 D417 2BDE C97E  92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
  build-sys: move slirp as git submodule project
  build-sys: pass CFLAGS & LDFLAGS to subdir-slirp

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-03 12:51:02 +01:00
Stefan Weil e0048b5e74 Update configure
The last *.aml file was removed in commit 13b1881aac.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190409053320.14612-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-03 13:03:04 +02:00
Dr. David Alan Gilbert 9c9642d09a configure: fix pam test warning
The pam test generates a warning on Fedora 29 with -O3 compilation
because the headers declare that the pam_conversation pointer to
pam_start must be non-NULL.  Change it to use the same 0 initialised
structure as we actually use in qauthz.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190404091725.20595-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-03 13:03:04 +02:00
Daniel P. Berrangé faf441429a configure: automatically pick python3 is available
Unless overridden via an env var or configure arg, QEMU will only look
for the 'python' binary in $PATH. This is unhelpful on distros which
are only shipping Python 3.x (eg Fedora) in their default install as,
if they comply with PEP 394, the bare 'python' binary won't exist.

This changes configure so that by default it will search for all three
common python binaries, preferring to find Python 3.x versions.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190327170701.23798-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-02 21:33:27 -03:00