Function 'kvm_get_supported_msrs' is only called once
now, get rid of the static variable 'kvm_supported_msrs'.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190725151639.21693-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Express the complex conditions in Kconfig rather than Makefiles, since Kconfig
is better suited at expressing dependencies and detecting contradictions.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
It is wrong for an entry to have parts out of scope of notifier's range.
assert this condition.
Out of scope mapping/unmapping would cause problem, as in below case:
1. initially there are two notifiers with ranges
0-0xfedfffff, 0xfef00000-0xffffffffffffffff,
IOVAs from 0x3c000000 - 0x3c1fffff is in shadow page table.
2. in vfio, memory_region_register_iommu_notifier() is followed by
memory_region_iommu_replay(), which will first call address space
unmap,
and walk and add back all entries in vtd shadow page table. e.g.
(1) for notifier 0-0xfedfffff,
IOVAs from 0 - 0xffffffff get unmapped,
and IOVAs from 0x3c000000 - 0x3c1fffff get mapped
(2) for notifier 0xfef00000-0xffffffffffffffff
IOVAs from 0 - 0x7fffffffff get unmapped,
but IOVAs from 0x3c000000 - 0x3c1fffff cannot get mapped back.
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <1561432878-13754-1-git-send-email-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to reduce the memory footprint we map into memory
the initrd using g_mapped_file_new() instead of reading it.
In this way we can share the initrd pages between multiple
instances of QEMU.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190724143105.307042-4-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to reduce the memory footprint we map into memory
the ELF to load using g_mapped_file_new_from_fd() instead of
reading each sections. In this way we can share the ELF pages
between multiple instances of QEMU.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190724143105.307042-3-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows handling an ELF memory-mapped, taking care
the reference count of the GMappedFile* passed through
rom_add_elf_program().
In this case, the 'data' pointer is not heap-allocated, so
we cannot free it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190724143105.307042-2-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for halt poll control MSR: save/restore, migration
and new feature name.
The purpose of this MSR is to allow the guest to disable
host halt poll.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20190603230408.GA7938@amt.cnet>
[Do not enable by default, as pointed out by Mark Kanda. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LzaF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-08-20' into staging
- Improvements for the Kconfig switches and Makefiles
# gpg: Signature made Tue 20 Aug 2019 08:26:41 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-08-20:
hw/core: Add a config switch for the generic loader device
hw/misc: Add a config switch for the "unimplemented" device
hw/core: Add a config switch for the "split-irq" device
hw/core: Add a config switch for the "or-irq" device
hw/core: Add a config switch for the "register" device
hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines
hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU
hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdWuVWAAoJENSXKoln91plH+UH/j2N0RdS/pLbJwW7JnmqDvDF
SKYZbK5i0KBzSMYMyiNimh+j7gQOfuPqbLJM/Y+FVPasJDfqqEsTdpHNc/HabbO2
fJNuviWT5LgiJ4E8K/y4RUa60uOdQFfaepukFFsGC1TanlDqGid0qRU2KXZwU1sQ
BV4LyM2FHsDG9AqPKfMiH012YsFQN5Qizu5He6JZxoW5tmqR3Mp7wIYJj6nqEEts
+zCGkFJAAYh8ZhkiRuYu0FwGjfjl3AGNKnjlmqDWsz/gjE19BHT9PDg9z5pWvOAH
IRfcRk9HH+GWUMXDgYti50i0/vILfU4O8nYwcC5FN2bHB3To/sCEfW6A/XiiFM8=
=eB6a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-20-2019' into staging
MIPS queue for August 20th, 2019
# gpg: Signature made Mon 19 Aug 2019 19:07:18 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-20-2019:
target/mips: tests/tcg: Fix target configurations for MSA tests
target/mips: tests/tcg: Add optional printing of more detailed failure info
target/mips: Style improvements in mips_mipssim.c
target/mips: Style improvements in mips_malta.c
target/mips: Style improvements in mips_int.c
target/mips: Style improvements in mips_fulong2e.c
target/mips: Style improvements in cps.c
target/mips: Style improvements in translate.c
target/mips: Style improvements in machine.c
target/mips: Style improvements in cpu.c
target/mips: Style improvements in cp0_timer.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- preallocation=falloc/full support for LUKS
- Various minor fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl1awg0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9Au70H/jTfnZ5HGCnuMG9Qfz592b3OJzLxAUxy
zRYZeYeQv2iBAJ8D3guJb4TIsvs9FgiZq6W+a+uXPZUfV2cPjHEcl2votnKuyWsx
udzR5wyGEbZjeMIv5lhzWMf3oqWin5MVDFQ2xUSjt9rfNDiHH4pMHuLO6AGkVaRS
MEOEs1/GEZ1mXPckG00YBJXMgmsk+7xWZ5cMjUI8Hsa1/nC2GLckh2j5y2rt3ppc
dt2he6/etnK0d8Yt8yZXyNl8xSW95f0Z+a1RefgGX5n3kCV6K/9hkRIhCTdunzDd
hULNummeZghjbn0HLyFjEnJlzSglWYprUsQj1HaXB4/LwMUwj3yNxHk=
=dDid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-08-19' into staging
Block patches:
- preallocation=falloc/full support for LUKS
- Various minor fixes
# gpg: Signature made Mon 19 Aug 2019 16:36:45 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-08-19:
doc: Preallocation does not require writing zeroes
iotests: Fix 141 when run with qed
vpc: Do not return RAW from block_status
vmdk: Make block_status recurse for flat extents
vdi: Make block_status recurse for fixed images
iotests: Full mirror to existing non-zero image
iotests: Test convert -n to pre-filled image
iotests: Convert to preallocated encrypted qcow2
vhdx: Fix .bdrv_has_zero_init()
vdi: Fix .bdrv_has_zero_init()
qcow2: Fix .bdrv_has_zero_init()
block: Use bdrv_has_zero_init_truncate()
block: Implement .bdrv_has_zero_init_truncate()
block: Add bdrv_has_zero_init_truncate()
mirror: Fix bdrv_has_zero_init() use
qemu-img: Fix bdrv_has_zero_init() use in convert
LUKS: support preallocation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The generic loader device is completely optional. Let's add a proper
config switch for it so that people can disable it if they don't need
it and want to create a minimalistic QEMU binary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.
Message-Id: <20190817101931.28386-8-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "split-irq" device is currently only used by machines that use
CONFIG_ARMSSE. Let's add a proper CONFIG_SPLIT_IRQ switch for this
so that it only gets compiled when we really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "register" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Message-Id: <20190817101931.28386-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The xlnx_dpdma device is only used by the ZynqMP AArch64 machine
(not the MicroBlaze PMU). Remove it from the ZynqMP generic objects.
(Note, this entry was duplicated for the AArch64).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-4-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Xilinx I/O Module Interrupt Controller is only used by the
MicroBlaze PMU, not by the AArch64 machine.
Move it from the generic ZynqMP object list to the PMU specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-3-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The XLNX_ZYNQMP config is used in multiple subdirectories
(timer, intc). Move it to the root hw/Kconfig.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-2-philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At this moment, the only MIPS CPUs that are emulated in QEMU and
support MSA extension are R5600 (mips32r5), and I6400/I6500 (mips64r6).
Therefore, mips32r5 and mips64r6 are the only ISAs that could support
MSA in QEMU. This means mips32r6 currently do not make much sense, and
mips32r5 support for MSA tests is needed, which is done by this patch.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-38-git-send-email-aleksandar.markovic@rt-rk.com>
There is a need for printing input and output data for failure cases,
for debugging purpose. This is achieved by this patch, and only if a
preprocessor constant is manually set to 1. (Assumption is that the
need for such printout is relatively rare.)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-37-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-17-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-16-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-15-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-14-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-13-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-12-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-10-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-8-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-7-git-send-email-aleksandar.markovic@rt-rk.com>
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
vpc is not really a passthrough driver, even when using the fixed
subformat (where host and guest offsets are equal). It should handle
preallocation like all other drivers do, namely by returning
DATA | RECURSE instead of RAW.
There is no tangible difference but the fact that bdrv_is_allocated() no
longer falls through to the protocol layer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-2-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The result of a sync=full mirror should always be the equal to the
input. Therefore, existing images should be treated as potentially
non-zero and thus should be explicitly initialized to be zero
beforehand.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test case for converting an empty image (which only returns zeroes
when read) to a preallocated encrypted qcow2 image.
qcow2_has_zero_init() should return 0 then, thus forcing qemu-img
convert to create zero clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190724171239.8764-10-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fixed VHDX images cannot guarantee to be zero-initialized. If the image
has the "fixed" subformat, forward the call to the underlying storage
node.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-9-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Static VDI images cannot guarantee to be zero-initialized. If the image
has been statically allocated, forward the call to the underlying
storage node.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190724171239.8764-8-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If a qcow2 file is preallocated, it can no longer guarantee that it
initially appears as filled with zeroes.
So implement .bdrv_has_zero_init() by checking whether the file is
preallocated; if so, forward the call to the underlying storage node,
except for when it is encrypted: Encrypted preallocated images always
return effectively random data, so .bdrv_has_zero_init() must always
return 0 for them.
.bdrv_has_zero_init_truncate() can remain bdrv_has_zero_init_1(),
because it presupposes PREALLOC_MODE_OFF.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-7-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
vhdx and parallels call bdrv_has_zero_init() when they do not really
care about an image's post-create state but only about what happens when
you grow an image. That is a bit ugly, and also overly safe when
growing preallocated images without preallocating the new areas.
Let them use bdrv_has_zero_init_truncate() instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-6-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
[mreitz: Added commit message]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We need to implement .bdrv_has_zero_init_truncate() for every block
driver that supports truncation and has a .bdrv_has_zero_init()
implementation.
Implement it the same way each driver implements .bdrv_has_zero_init().
This is at least not any more unsafe than what we had before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
No .bdrv_has_zero_init() implementation returns 1 if growing the file
would add non-zero areas (at least with PREALLOC_MODE_OFF), so using it
in lieu of this new function was always safe.
But on the other hand, it is possible that growing an image that is not
zero-initialized would still add a zero-initialized area, like when
using nonpreallocating truncation on a preallocated image. For callers
that care only about truncation, not about creation with potential
preallocation, this new function is useful.
Alternatively, we could have added a PreallocMode parameter to
bdrv_has_zero_init(). But the only user would have been qemu-img
convert, which does not have a plain PreallocMode value right now -- it
would have to parse the creation option to obtain it. Therefore, the
simpler solution is to let bdrv_has_zero_init() inquire the
preallocation status and add the new bdrv_has_zero_init_truncate() that
presupposes PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If qemu-img convert did not create the image itself, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-2-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These are now generated by decodetree itself.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
