Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FCR0_HAS2008 flag has been enabled in commit ba5c79f262
("target-mips: indicate presence of IEEE 754-2008 FPU in
R6/R5+MSA CPUs"), so remove the obsolete FIXME comment.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028212103.2126176-1-f4bug@amsat.org>
When using the Loongson-3A4000 CPU, the MSAIR is returned with a
zero value (because unimplemented). Checking on real hardware,
this value appears incorrect:
$ cat /proc/cpuinfo
system type : generic-loongson-machine
machine : loongson,generic
cpu model : Loongson-3 V0.4 FPU V0.1
model name : Loongson-3A R4 (Loongson-3A4000) @ 1800MHz
isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented : vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
...
Checking the CFCMSA opcode result with gdb we get 0x60140:
Breakpoint 1, 0x00000001200037c4 in main ()
1: x/i $pc
=> 0x1200037c4 <main+52>: cfcmsa v0,msa_ir
(gdb) si
0x00000001200037c8 in main ()
(gdb) i r v0
v0: 0x60140
MSAIR bits 17 and 18 are "reserved" per the spec revision 1.12,
so mask them out, and set MSAIR=0x0140 for the Loongson-3A4000
CPU model added in commit af868995e1.
Cc: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211026180920.1085516-1-f4bug@amsat.org>
Only the MSA generic opcode was overlapping with the other
instructions. Since the previous commit removed it, we can
now remove the overlap group. The decodetree script forces
us to re-indent the opcodes.
Diff trivial to review using `git-diff --ignore-all-space`.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-32-f4bug@amsat.org>
All opcodes have been converted to decodetree. The generic
MSA handler is now pointless, remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-31-f4bug@amsat.org>
Convert the CTCMSA (Copy To Control MSA register) opcode
to decodetree. Since it overlaps with the SLDI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-30-f4bug@amsat.org>
Convert the CFCMSA (Copy From Control MSA register) opcode
to decodetree. Since it overlaps with the SPLATI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-29-f4bug@amsat.org>
Convert the MOVE.V opcode (Vector Move) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-28-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-27-f4bug@amsat.org>
Convert the COPY_U opcode (Element Copy to GPR Unsigned) to
decodetree.
Since the 'n' field is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-26-f4bug@amsat.org>
Convert instructions with an immediate element index
and data format df/n to decodetree.
Since the 'data format' and 'n' fields are constant values,
use tcg_constant_i32() instead of a TCG temporaries.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-25-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-24-f4bug@amsat.org>
Convert BINSL (Vector Bit Insert Left) and BINSR (Vector Bit
Insert Right) opcodes to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-23-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Per the Encoding of Operation Field for 3R Instruction Format'
(Table 3.25), these instructions are not defined for the BYTE
format. Therefore the TRANS_DF_iii_b() macro returns 'false'
in that case, because no such instruction is decoded.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-22-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Note, the format definition could be named @3rf_b (for
3R with a df field BYTE-based) but since the instruction
class is named '3R', we simply call the format @3r to
ease reviewing the msa.decode file.
However we directly call the trans_msa_3rf() function,
which handles the BYTE-based df field.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-21-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-20-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-19-f4bug@amsat.org>
Convert 3-register instructions with implicit data formats
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-18-f4bug@amsat.org>
Convert 2-register operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-17-f4bug@amsat.org>
Convert the FILL opcode (Vector Fill from GPR) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-16-f4bug@amsat.org>
Convert 2-register floating-point operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-15-f4bug@amsat.org>
Convert load/store instructions to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-14-f4bug@amsat.org>
Convert instructions with an 8-bit immediate value and either
implicit data format or data format df to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-13-f4bug@amsat.org>
Convert the SHF opcode (Immediate Set Shuffle Elements) to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-12-f4bug@amsat.org>
Convert instructions with an immediate bit index and
data format df/m to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-11-f4bug@amsat.org>
Convert instructions with a 5-bit immediate value to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-10-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-9-f4bug@amsat.org>
This 'shift amount' format is not always 16-bit, so name it
generically as 'sa'. This will help to unify the various
arg_msa decodetree generated structures.
Rename the @bz format -> @bz_v (specific @bz with df=3) and
@bz_df -> @bz (generic @bz).
Since we modify &msa_bz, re-align its arguments, so the other
structures added in the following commits stay visually aligned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-8-f4bug@amsat.org>
Replace magic DataFormat value by the corresponding
enum from CPUMIPSMSADataFormat.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-7-f4bug@amsat.org>
Have check_msa_access() return a boolean value so we can
return early if MSA is not enabled (the instruction got
decoded properly, but we raised an exception).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-6-f4bug@amsat.org>
The dup_const() helper makes the code easier to follow, use it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-5-f4bug@amsat.org>
While the first 'off' variable assignment is unused, it helps
to better understand the code logic. Move the assignation where
it would have been used so it is easier to compare the MSA
registers based on FPU ones versus the MSA specific registers.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211023214803.522078-34-f4bug@amsat.org>
The result of the 'Vector Multiply and Subtract' opcode is
incorrect with Byte vectors. Probably due to a copy/paste error,
commit 5f148a0232 mistakenly used the $wt (target register)
instead of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 5f148a0232 ("target/mips: msa: Split helpers for MSUBV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-3-f4bug@amsat.org>
The result of the 'Vector Multiply and Add' opcode is incorrect
with Byte vectors. Probably due to a copy/paste error, commit
7a7a162add mistakenly used the $wt (target register) instead
of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 7a7a162add ("target/mips: msa: Split helpers for MADDV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-2-f4bug@amsat.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for mips linux-user.
This means we can remove tcg/user/tlb_helper.c entirely.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d
("target-mips: Add ASE DSP accumulator instructions"), the
'v2_t' TCG temporary has never been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
While for the DEXTR_S.H opcode:
"The shift argument is provided in the instruction."
For the DEXTRV_S.H opcode we have:
"The five least-significant bits of register rs provide the
shift argument, interpreted as a five-bit unsigned integer;
the remaining bits in rs are ignored."
While 't1' contains the 'rs' register content (the shift value
for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H.
We can directly use the v1_t TCG register which already contains
this shift value.
Fixes: b53371ed5d ("target-mips: Add ASE DSP accumulator instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
The offset is constant and read-only: move it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
We already use sextract32(), use extract32() for completeness
instead of open-coding it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-7-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-6-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-5-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-4-f4bug@amsat.org>
Data Format is a 2-bit constant value.
Avoid using a TCG temporary by moving it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-3-f4bug@amsat.org>
Commits cbe50b9a8e ("target-mips: add MSA VEC/2R format instructions")
and 3bdeb68866 ("target-mips: add MSA 2RF format instructions") added
the MSA 2R/2RF instructions. However these instructions don't use any
target vector register, so remove the unused TCG temporaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003175743.3738710-2-f4bug@amsat.org>
Per the "MIPS Architecture Extension: nanoMIPS32 DSP TRM" rev 0.04,
MULT and MULTU opcodes:
The value of ac selects an accumulator numbered from 0 to 3.
When ac=0, this refers to the original HI/LO register pair of the
MIPS32 architecture.
In Release 6 of the MIPS Architecture, accumulators are eliminated
from MIPS32.
Ensure pre-Release 6 is restricted to HI/LO registers pair.
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 4")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per an ancient comment in mips_tr_translate_insn about the
expectations of gdb, when restarting the insn in a delay slot
we also re-execute the branch. Which means that we are
expected to execute two insns in this case.
This has been broken since 8b86d6d258, where we forced max_insns
to 1 while single-stepping. This resulted in an exit from the
translator loop after the branch but before the delay slot is
translated.
Increase the max_insns to 2 for this case. In addition, bypass
the end-of-page check, for when the branch itself ends the page.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson
Frédéric Pétrot
Philippe Mathieu-Daudé