This "hotpluggable" here is misleading. Actually we check is object a
device or not. Let's drop the word.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240329183758.3360733-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's not care about what was changed and update the whole config,
reasons:
1. config->geometry should be updated together with capacity, so we fix
a bug.
2. Vhost-user protocol doesn't say anything about config change
limitation. Silent ignore of changes doesn't seem to be correct.
3. vhost-user-vsock reads the whole config
4. on realize we don't do any checks on retrieved config, so no reason
to care here
Comment "valid for resize only" exists since introduction the whole
hw/block/vhost-user-blk.c in commit
00343e4b54
"vhost-user-blk: introduce a new vhost-user-blk host device",
seems it was just an extra limitation.
Also, let's notify guest unconditionally:
1. So does vhost-user-vsock
2. We are going to reuse the functionality in new cases when we do want
to notify the guest unconditionally. So, no reason to create extra
branches in the logic.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20240329183758.3360733-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The set_config callback function vhost_vdpa_device_get_config in
vdpa-dev does not fetch the current device status from the hardware
device, causing the guest os to not receive the latest device status
information.
The hardware updates the config status of the vdpa device and then
notifies the os. The guest os receives an interrupt notification,
triggering a get_config access in the kernel, which then enters qemu
internally. Ultimately, the vhost_vdpa_device_get_config function of
vdpa-dev is called
One scenario encountered is when the device needs to bring down the
vdpa net device. After modifying the status field of virtio_net_config
in the hardware, it sends an interrupt notification. However, the guest
os always receives the STATUS field as VIRTIO_NET_S_LINK_UP.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240408020003.1979-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the event of writing many chains of descriptors, the device must
write just the id of the last buffer in the descriptor chain, skip
forward the number of descriptors in the chain, and then repeat the
operations for the rest of chains.
Current QEMU code writes all the buffer ids consecutively, and then
skips all the buffers altogether. This is a bug, and can be reproduced
with a VirtIONet device with _F_MRG_RXBUB and without
_F_INDIRECT_DESC:
If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature
but not the VIRTIO_RING_F_INDIRECT_DESC feature,
'VirtIONetQueue->rx_vq' will use the merge feature
to store data in multiple 'elems'.
The 'num_buffers' in the virtio header indicates how many elements are merged.
If the value of 'num_buffers' is greater than 1,
all the merged elements will be filled into the descriptor ring.
The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current handling of invalid virtqueue elements inside the TX/RX virt
queue handlers is wrong.
They are added in a per-stream invalid queue to be processed after the
handler is done examining each message, but the invalid message might
not be specifying any stream_id; which means it's invalid to add it to
any stream->invalid queue since stream could be NULL at this point.
This commit moves the invalid queue to the VirtIOSound struct which
guarantees there will always be a valid temporary place to store them
inside the tx/rx handlers. The queue will be emptied before the handler
returns, so the queue must be empty at any other point of the device's
lifetime.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-rewrite-invalid-tx-rx-message-handling-v1.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch improves error handling in virtio_snd_handle_tx_xfer()
and virtio_snd_handle_rx_xfer() in the VirtIO sound driver. Previously,
'goto' statements were used for error paths, leading to unnecessary
processing and potential null pointer dereferences. Now, 'continue' is
used to skip the rest of the current loop iteration for errors such as
message size discrepancies or null streams, reducing crash risks.
ASAN log illustrating the issue addressed:
ERROR: AddressSanitizer: SEGV on unknown address 0x0000000000b4
#0 0x57cea39967b8 in qemu_mutex_lock_impl qemu/util/qemu-thread-posix.c:92:5
#1 0x57cea128c462 in qemu_mutex_lock qemu/include/qemu/thread.h:122:5
#2 0x57cea128d72f in qemu_lockable_lock qemu/include/qemu/lockable.h:95:5
#3 0x57cea128c294 in qemu_lockable_auto_lock qemu/include/qemu/lockable.h:105:5
#4 0x57cea1285eb2 in virtio_snd_handle_rx_xfer qemu/hw/audio/virtio-snd.c:1026:9
#5 0x57cea2caebbc in virtio_queue_notify_vq qemu/hw/virtio/virtio.c:2268:9
#6 0x57cea2cae412 in virtio_queue_host_notifier_read qemu/hw/virtio/virtio.c:3671:9
#7 0x57cea39822f1 in aio_dispatch_handler qemu/util/aio-posix.c:372:9
#8 0x57cea3979385 in aio_dispatch_handlers qemu/util/aio-posix.c:414:20
#9 0x57cea3978eb1 in aio_dispatch qemu/util/aio-posix.c:424:5
#10 0x57cea3a1eede in aio_ctx_dispatch qemu/util/async.c:360:5
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20240322110827.568412-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit cd341fd1ff.
The patch adds non-upstream code in
include/standard-headers/linux/virtio_pci.h
which would make maintainance harder.
Revert for now.
Suggested-by: Jason Wang <jasowang@redhat.com>
Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmYOtvEeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf+5oIAJtRPiTP5aUmN4nU
s72NBtgARBJ+5hHl0fqFFlCrG9elO28F1vhT9DwwBOLwihZCnfIXf+SCoE+pvqDw
c+AMN/RnDu+1F4LF93W0ZIr305yGDfVlU+S3vKGtB9G4rcLeBDmNlhui2d0Bqx9R
jwX1y57vcPclObE0KL6AVOfSDPYiVEVQSiTr3j4oW8TqAs2bduEZMRh6esb3XMIA
hmj8mhZAszfh1YvX8ufbxtPQsnNuFMM+Fxgxp0pux8QaI0addDHwVNObRUYlTUZ1
o4xCw7TRXXotaHde/OqZApFECs+md3R7rC2wj7s3ae0ynohHHDFfaB5t1f4pm+kA
/6UN/Jc=
=XwaI
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240404' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmYOtvEeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf+5oIAJtRPiTP5aUmN4nU
# s72NBtgARBJ+5hHl0fqFFlCrG9elO28F1vhT9DwwBOLwihZCnfIXf+SCoE+pvqDw
# c+AMN/RnDu+1F4LF93W0ZIr305yGDfVlU+S3vKGtB9G4rcLeBDmNlhui2d0Bqx9R
# jwX1y57vcPclObE0KL6AVOfSDPYiVEVQSiTr3j4oW8TqAs2bduEZMRh6esb3XMIA
# hmj8mhZAszfh1YvX8ufbxtPQsnNuFMM+Fxgxp0pux8QaI0addDHwVNObRUYlTUZ1
# o4xCw7TRXXotaHde/OqZApFECs+md3R7rC2wj7s3ae0ynohHHDFfaB5t1f4pm+kA
# /6UN/Jc=
# =XwaI
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Apr 2024 15:19:29 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-sparc-20240404' of https://github.com/mcayland/qemu:
esp.c: remove explicit setting of DRQ within ESP state machine
esp.c: ensure esp_pdma_write() always calls esp_fifo_push()
esp.c: update esp_fifo_{push, pop}() to call esp_update_drq()
esp.c: introduce esp_update_drq() and update esp_fifo_{push, pop}_buf() to use it
esp.c: move esp_set_phase() and esp_get_phase() towards the beginning of the file
esp.c: prevent cmdfifo overflow in esp_cdb_ready()
esp.c: rework esp_cdb_length() into esp_cdb_ready()
esp.c: don't assert() if FIFO empty when executing non-DMA SELATNS
esp.c: introduce esp_fifo_push_buf() function for pushing to the FIFO
esp.c: change esp_fifo_pop_buf() to take ESPState
esp.c: use esp_fifo_push() instead of fifo8_push()
esp.c: change esp_fifo_pop() to take ESPState
esp.c: change esp_fifo_push() to take ESPState
esp.c: replace cmdfifo use of esp_fifo_pop() in do_message_phase()
esp.c: replace esp_fifo_pop_buf() with esp_fifo8_pop_buf() in do_message_phase()
esp.c: replace esp_fifo_pop_buf() with esp_fifo8_pop_buf() in do_command_phase()
esp.c: move esp_fifo_pop_buf() internals to new esp_fifo8_pop_buf() function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now the esp_update_drq() is called for all reads/writes to the FIFO, there is
no need to manually raise and lower the DRQ signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/611
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1831
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This ensures that esp_update_drq() is called via esp_fifo_push() whenever the
host uses PDMA to transfer data to a SCSI device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This ensures that the DRQ line is always set correctly when reading/writing
single bytes to/from the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This new function sets the DRQ line correctly according to the current transfer
mode, direction and FIFO contents. Update esp_fifo_push_buf() and esp_fifo_pop_buf()
to use it so that DRQ is always set correctly when reading/writing multiple bytes
to/from the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows these functions to be used earlier in the file without needing a
separate forward declaration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
During normal use the cmdfifo will never wrap internally and cmdfifo_cdb_offset
will always indicate the start of the SCSI CDB. However it is possible that a
malicious guest could issue an invalid ESP command sequence such that cmdfifo
wraps internally and cmdfifo_cdb_offset could point beyond the end of the FIFO
data buffer.
Add an extra check to fifo8_peek_buf() to ensure that if the cmdfifo has wrapped
internally then esp_cdb_ready() will exit rather than allow scsi_cdb_length() to
access data outside the cmdfifo data buffer.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The esp_cdb_length() function is only used as part of a calculation to determine
whether the cmdfifo contains an entire SCSI CDB. Rework esp_cdb_length() into a
new esp_cdb_ready() function which both enables us to handle the case where
scsi_cdb_length() returns -1, plus simplify the logic for its callers.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current logic assumes that at least 1 byte is present in the FIFO when
executing a non-DMA SELATNS command, but this may not be the case if the
guest executes an invalid ESP command sequence.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of pushing data into the FIFO directly with fifo8_push_all(), add a new
esp_fifo_push_buf() function and use it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop_buf() operate on the main FIFO there is no
need to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There are still a few places that use fifo8_push() instead of esp_fifo_push() in
order to push a value into the FIFO. Update those places to use esp_fifo_push()
instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_push() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_message_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_command_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Update esp_fifo_pop_buf() to be a simple wrapper onto the new esp_fifo8_pop_buf()
function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This modification ensures that in scenarios where the buffer size is
insufficient for a zone report, the function will now properly set an
error status and proceed to a cleanup label, instead of merely
returning.
The following ASAN log reveals it:
==1767400==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 312 byte(s) in 1 object(s) allocated from:
#0 0x64ac7b3280cd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x735b02fb9738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x64ac7d23be96 in virtqueue_split_pop hw/virtio/virtio.c:1612:12
#3 0x64ac7d23728a in virtqueue_pop hw/virtio/virtio.c:1783:16
#4 0x64ac7cfcaacd in virtio_blk_get_request hw/block/virtio-blk.c:228:27
#5 0x64ac7cfca7c7 in virtio_blk_handle_vq hw/block/virtio-blk.c:1123:23
#6 0x64ac7cfecb95 in virtio_blk_handle_output hw/block/virtio-blk.c:1157:5
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240404120040.1951466-1-zheyuma97@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If no bytes are there to process in the message in phase,
the input data latch (s->sidl) is set to s->msg[-1]. Just
do nothing since no DMA is performed.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Horizontal pel panning bit 3 is only used in text mode. In graphics
mode, it can be treated as if it was zero, thus not extending the
dirty memory region.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pel panning is active, one more byte is read from each of the VGA
memory planes. This has to be accounted in the computation of region_end,
otherwise vga_draw_graphic() fails an assertion:
qemu-system-i386: ../system/physmem.c:946: cpu_physical_memory_snapshot_get_dirty: Assertion `start + length <= snap->end' failed.
Reported-by: Helge Konetzka <hk@zapateado.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2244
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the computation of region_start and region_end after the value of
"bits" is known. This makes it possible to distinguish modes that
support horizontal pel panning from modes that do not.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two sets of conditionals using the shift control bits: one to
verify the palette and adjust disp_width, one to compute the "v" and
"bits" variables. Merge them into one, with the extra benefit that
we now have the "bits" value available early and can use it to
compute region_end.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When vhost-user or vhost-kernel is handling virtio net datapath,
QEMU should not touch used ring.
But with vhost-user socket reconnect scenario, in a very rare case
(has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in
following code path:
#0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511
#1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576
#2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801
#3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248
#4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525
#5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321
#6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774
#7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259
#8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199
#9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783
#10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592
#11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266
#12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412
#13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311
#14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392
#15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455
#16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459
#17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301
#18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62
#19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82
This issue causes guest kernel stop kicking device and traffic stop.
Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong
VRING_USED_F_NO_NOTIFY set.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240402045109.97729-1-yajunw@nvidia.com>
[PMD: Use unlikely()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In xen_evtchn_soft_reset() variable flush_kvm_routes can
be used before being initialized.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Oleg Sviridov <oleg.sviridov@red-soft.ru>
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240329113939.257033-1-artem.chernyshev@red-soft.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It was noticed that my linux.vnet.ibm.com address does not
always work so dropping the vnet to see if that works better.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Message-ID: <20240328194914.2145709-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
../hw/nvme/ctrl.c:6081:21: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
It's not obvious that 'result' is set in all code paths. When &result is
a returned argument, it's even less clear.
Looking at various assignments, 0 seems to be a suitable default value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-ID: <20240328102052.3499331-18-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity complains that the check introduced in commit 3f934817 suggests
that qiov could be NULL and we dereference it before reaching the check.
In fact, all of the callers pass a non-NULL pointer, so just remove the
misleading check.
Resolves: Coverity CID 1542668
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240327192750.204197-1-kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL is based on PCIe. In is pointless to initialize
its context on non-PCI machines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240327161642.33574-1-philmd@linaro.org>
The commit 15002f60f7 ("util: rename qemu-error.c to match its header
name") renamed util/qemu-error.c to util/error-report.c but missed to
change the corresponding entry.
To avoid get_maintainer.pl failing, update the error-report.c entry.
Fixes: 15002f60f7 ("util: rename qemu-error.c to match its header name")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240327115539.3860270-1-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since size_to_prdtl() is only used within ahci.c,
declare it statically. This removes the last use
of "inlined function with external linkage". See
previous commit and commit 9de9fa5cf2 for rationale.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240326171009.26696-4-philmd@linaro.org>
See previous commit and commit 9de9fa5cf2 ("Avoid using inlined
functions with external linkage") for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313184954.42513-3-philmd@linaro.org>
Similarly to commit 9de9fa5cf2 ("hw/arm/smmu-common: Avoid using
inlined functions with external linkage"):
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Fix:
C compiler for the host machine: clang (clang 15.0.0 "Apple clang version 15.0.0 (clang-1500.3.9.4)")
...
hw/arm/smmu-common.c:203:43: error: static function 'smmu_hash_remove_by_vmid' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_vmid, &vmid);
^
include/hw/arm/smmu-common.h:197:1: note: use 'static' to give inline function 'smmu_iotlb_inv_vmid' internal linkage
void smmu_iotlb_inv_vmid(SMMUState *s, uint16_t vmid);
^
static
hw/arm/smmu-common.c:139:17: note: 'smmu_hash_remove_by_vmid' declared here
static gboolean smmu_hash_remove_by_vmid(gpointer key, gpointer value,
^
Fixes: ccc3ee3871 ("hw/arm/smmuv3: Add CMDs related to stage-2")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240313184954.42513-2-philmd@linaro.org>
Unify with other init_excp_FOO() in the same file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240313213339.82071-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313213339.82071-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313213339.82071-3-philmd@linaro.org>
