Implement the following PowerISA v3.1 instructions:
xxmfacc: VSX Move From Accumulator
xxmtacc: VSX Move To Accumulator
xxsetaccz: VSX Set Accumulator to Zero
The PowerISA 3.1 mentions that for the current version of the
architecture, "the hardware implementation provides the effect of ACC[i]
and VSRs 4*i to 4*i + 3 logically containing the same data" and "The
Accumulators introduce no new logical state at this time" (page 501).
For now it seems unnecessary to create new structures, so this patch
just uses ACC[i] as VSRs 4*i to 4*i+3 and therefore move to and from
accumulators are no-ops.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This allows an x86 host to no-op lwsyncs, and ppc host can use lwsync
rather than sync.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
lwsync orders more than just LD_LD, importantly it matches x86 and
s390 default memory ordering.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
eieio does not provide ordering between stores to CI memory and stores
to cacheable memory so it can't be used as a general ST_ST barrier.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220519135908.21282-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The generated eieio memory ordering semantics do not match the
instruction definition in the architecture. Add a big comment to
explain this strange instruction and correct the memory ordering
behaviour.
Signed-off: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumshm and vmsumshs to decodetree, declare vmsumshm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumuhm and vmsumuhs to decodetree, declare vmsumuhm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-12-matheus.ferst@eldorado.org.br>
[danielhb: added #undef VMSUMUHM to fix ppc64 build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumubm and vmsummbm to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-11-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xxextractuw and xxinsertw to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xvxsigsp to decodetree, declare helper_xvxsigsp with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xscvspdpn to decodetree, declare helper_xscvspdpn with
TCG_CALL_NO_RWG_SE and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fsel doesn't change FPSCR and CR1 is handled by gen_set_cr1_from_fpscr,
so helper_fsel doesn't need the env argument and can be declared with
TCG_CALL_NO_RWG_SE. We also take this opportunity to move the insn to
decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of VSX instructions without cpu_env as an argument do not access
globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of BCD instructions only access the VSRs supplied by the
TCGv_ptr arguments, no globals are accessed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of vector instructions without cpu_env as an argument do not
access globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When writing a register from the TCTXT memory region (4th page within
the IC BAR), we were overwriting the Presentation Controller (PC)
register at the same offset. It looks like a silly cut and paste
error.
We were somehow lucky: the TCTXT registers being touched are
TCTXT_ENx/_SET/_RESET to enable physical threads and the PC registers
at the same offset are either not used by our model or the update was
harmless.
Found through code inspection.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220523151859.72283-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bit FI fix used the sfprf flag as a flag for the set_fi parameter
in do_float_check_status where applicable. Now, this patch rename this
flag to sfifprf to state this dual usage.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch fixes another not-so-clear situation in Power ISA
regarding the inexact bits in FPSCR. The ISA states that:
"""
When Overflow Exception is disabled (OE=0) and an
Overflow Exception occurs, the following actions are
taken:
...
2. Inexact Exception is set
XX <- 1
...
FI is set to 1
...
"""
However, when tested on a Power 9 hardware, some instructions that
trigger an OX don't set the FI bit:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> CLEARED
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> CLEARED
(just a few examples. Other instructions are also affected)
The root cause for this seems to be that only instructions that list
the bit FI in the "Special Registers Altered" should modify it.
QEMU is, today, not working like the hardware:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> SET
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> SET
(all tests assume FI is cleared beforehand)
Fix this by making float_overflow_excp() return float_flag_inexact
if it should update the inexact flags.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to Power ISA, the FI bit in FPSCR is non-sticky.
This means that if an instruction is said to modify the FI bit, then
it should be set or cleared depending on the result of the
instruction. Otherwise, it should be kept as was before.
However, the following inconsistency was found when comparing results
from the hardware (tested on both a Power 9 processor and in
Power 10 Mambo):
(FI bit is set before the execution of the instruction)
Hardware: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> SET
QEMU: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> CLEARED
As the FI bit is non-sticky, and xscmpeqdp does not list it as a field
that is changed by the instruction, it should not be changed after its
execution.
This is happening to multiple instructions in the vsx implementations.
If the ISA does not list the FI bit as altered for a particular
instruction, then it should be kept as it was before the instruction.
QEMU is not following this behavior. Affected instructions include:
- xv* (all vsx-vector instructions);
- xscmp*, xsmax*, xsmin*;
- xstdivdp and similars;
(to identify the affected instructions, just search in the ISA for
the instructions that does not list FI in "Special Registers Altered")
Most instructions use the function do_float_check_status() to commit
changes in the inexact flag. So the fix is to add a parameter to it
that will control if the bit FI should be changed or not.
All users of do_float_check_status() are then modified to provide this
argument, controlling if that specific instruction changes bit FI or
not.
Some macro helpers are responsible for both instructions that change
and instructions that aren't suposed to change FI. This seems to always
overlap with the sfprf flag. So, reuse this flag for this purpose when
applicable.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517161522.36132-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 74c4912f09 changed check_tlb_flush() to use
tlb_flush_all_cpus_synced() instead of calling tlb_flush() on each
CPU. However, as side effect of this, a CPU executing a ptesync
after a tlbie will have its TLB flushed only after exiting its
current Translation Block (TB).
This causes memory accesses to invalid pages to succeed, if they
happen to be on the same TB as the ptesync.
To fix this, use tlb_flush_all_cpus() instead, that immediately
flushes the TLB of the CPU executing the ptesync instruction.
Fixes: 74c4912f09 ("target/ppc: Fix synchronization of mttcg with broadcast TLB flushes")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220503163904.22575-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When CONFIG_MOS6522 is not set, building ppc64-softmmu target fails:
/usr/bin/ld: libqemu-ppc64-softmmu.fa.p/monitor_misc.c.o:(.data+0x1158): undefined reference to `hmp_info_via'
Make devices configuration available in hmp-commands*.hx and check for
CONFIG_MOS6522.
Fixes: 409e9f7131 (mos6522: add "info via" HMP command for debugging)
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220510235439.54775-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The alternative small firmware needs a few words of what it can and
absolutely cannot do; this adds those words.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220506055124.3822112-1-aik@ozlabs.ru>
[danielhb: added linebreaks before and after table]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
tl;dr: This allows Big Endian zImage booting via -kernel + x-vof=on.
QEMU loads the kernel at 0x400000 by default which works most of
the time as Linux kernels are relocatable, 64bit and compiled with "-pie"
(position independent code). This works for a little endian zImage too.
However a big endian zImage is compiled without -pie, is 32bit, linked to
0x4000000 so current QEMU ends up loading it at
0x4400000 but keeps spapr->kernel_addr unchanged so booting fails.
This uses the kernel address returned from load_elf().
If the default kernel_addr is used, there is no change in behavior (as
translate_kernel_address() takes care of this), which is:
LE/BE vmlinux and LE zImage boot, BE zImage does not.
If the VM created with "-machine kernel-addr=0,x-vof=on", then QEMU
prints a warning and BE zImage boots.
Note #1: SLOF (x-vof=off) still cannot boot a big endian zImage as
SLOF enables MSR_SF for everything loaded by QEMU and this leads to early
crash of 32bit zImage.
Note #2: BE/LE vmlinux images set MSR_SF in early boot so these just work;
a LE zImage restores MSR_SF after every CI call and we are lucky enough
not to crash before the first CI call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220504065536.3534488-1-aik@ozlabs.ru>
[danielhb: use PRIx64 instead of lx in warn_report]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 28290f37e2 'PPC: E500: Generate
device tree on reset' improved device tree generation and made
BINARY_DEVICE_TREE_FILE obsolete.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220505161805.11116-8-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-machine graphics=off is the usual way to tell the firmware or the OS that the
user wants a serial console. The pseries machine however does not support
this, and never adds the stdout-path node to the device tree if a VGA device
is provided. This is in addition to the other magic behavior of VGA devices,
which is to add a keyboard and mouse to the default USB bus.
Split spapr->has_graphics in two variables so that the two behaviors can be
separated: the USB devices remains the same, but the stdout-path is added
even with "-device VGA -machine graphics=off".
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220507054826.124936-1-pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This extends the internal crypto APIs to support the use of asymmetric
ciphers.
-----BEGIN PGP SIGNATURE-----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=X589
-----END PGP SIGNATURE-----
Merge tag 'ak-pull-request' of https://gitlab.com/berrange/qemu into staging
Merge asymmetric cipher crypto support
This extends the internal crypto APIs to support the use of asymmetric
ciphers.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmKPWdgACgkQvobrtBUQ
# T9/dXA//XozeQbIK9y/1wb60LXiqHiHDMi8Ct1oEpNsLaL4lsp09VjtmxggqMfad
# MjxQjKdOVMVPISRnrKCJQ6qiGKQB7C/php1ZxOPdG4zgf2Ofl312GHZCLjqLkpB8
# KnhdFB31coI45EQ+agk5ZO8Baml85yY4sALLofGXV3xatJswH1HoMAmDATe5ebko
# ox7qd/S9Q4bpZA4v+8fUbvX2zI95hZta8+4d2Irx542gO8KibYKRVmffJhcKx6hy
# 4x7iTEaGQQn3DFMbVxsvb4wLwx1v8sSS6C2rHuGZY67ZzDnYhAdaHG9CaWR3uvtS
# vs7EcEWqn45SfJ/FaYUyon/btsawJrXP9NISmns4J6TYoN6sJJVxk9T9A/hlqtEE
# /iwTfp/Se+o2JDLgC+JHQz8maj4igloGNhF8+u4lXBLEpT7tlvaxhkrcPo9Um7ay
# bWpmLoxVN5vEvOnsrfLhK6LGPIzfjP4tYX0xwWy5Lm/DZ1LinJOONPXjArFr3TaQ
# rcS6L15ZaiFu9bYUyN1Uf7V7VydiVV8RlkuTqJ614gSX0v+GCMR1J+0WsQ4DtPlT
# G6WP0EnnD4Ulg9XpSMte2GXKQ0d8c7hTKr3/RW+BuvvgP5T4P7guBTRhmufRiip6
# BByKpXrQ72yGm6U+nTtEVFdUWVER31U0ufsW64hdM+LGfiG7fUE=
# =X589
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 26 May 2022 03:43:36 AM PDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
* tag 'ak-pull-request' of https://gitlab.com/berrange/qemu:
tests/crypto: Add test suite for RSA keys
test/crypto: Add test suite for crypto akcipher
crypto: Implement RSA algorithm by gcrypt
crypto: Implement RSA algorithm by hogweed
crypto: add ASN.1 DER decoder
crypto: Introduce akcipher crypto class
qapi: crypto-akcipher: Introduce akcipher types to qapi
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Staring with SEABIOS_HPPA_VERSION 6 the serial ports are now emulated as
on physical hardware, with LASI UART being serial port #0 and DINO UART
as serial port #1. On older versions those ports were swapped.
This SeaBIOS-hppa fix is needed to allow fixing the qemu serial
pass-through from host to guest.
Signed-off-by: Helge Deller <deller@gmx.de>
As Daniel suggested, Add tests suite for rsakey, as a way to prove
that we can handle DER errors correctly.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add unit test and benchmark test for crypto akcipher.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Added gcryt implementation of RSA algorithm, RSA algorithm
implemented by gcrypt has a higher priority than nettle because
it supports raw padding.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implement RSA algorithm by hogweed from nettle. Thus QEMU supports
a 'real' RSA backend to handle request from guest side. It's
important to test RSA offload case without OS & hardware requirement.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add an ANS.1 DER decoder which is used to parse asymmetric
cipher keys
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new akcipher crypto class 'QCryptoAkCIpher', which supports
basic asymmetric operations: encrypt, decrypt, sign and verify.
Suggested by Daniel P. Berrangé, also add autoptr cleanup for the new
class. Thanks to Daniel!
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce akcipher types, also include RSA related types.
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
rSTify docs/hyperv.txt and link it from docs/system/target-i386.rst.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V TLFS allows for L0 and L1 hypervisors to collaborate on L2's
TLB flush hypercalls handling. With the correct setup, L2's TLB flush
hypercalls can be handled by L0 directly, without the need to exit to
L1.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM kind of supported "extended GVA ranges" (up to 4095 additional GFNs
per hypercall) since the implementation of Hyper-V PV TLB flush feature
(Linux-4.18) as regardless of the request, full TLB flush was always
performed. "Extended GVA ranges for TLB flush hypercalls" feature bit
wasn't exposed then. Now, as KVM gains support for fine-grained TLB
flush handling, exposing this feature starts making sense.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
KVM supports the feature since v5.14.
Rename HV_HYPERCALL_{PARAMS_XMM_AVAILABLE -> XMM_INPUT_AVAILABLE} to
comply with KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, HV_CPUID_NESTED_FEATURES.EAX CPUID leaf was handled differently
as it was only used to encode the supported eVMCS version range. In fact,
there are also feature (e.g. Enlightened MSR-Bitmap) bits there. In
preparation to adding these features, move HV_CPUID_NESTED_FEATURES leaf
handling to hv_build_cpuid_leaf() and drop now-unneeded 'hyperv_nested'.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior to this patch, the pre-GRUB Solaris x86 bootloader would fail to
load on QEMU with the following screen output:
SunOS Secondary Boot version 3.00
prom_panic: Could not mount filesystem.
Entering boot debugger:
[136419]: _
This occurs because the bootloader issues an ATA IDENTIFY DEVICE
command, and then reads the resulting 256 words of parameter
information using inb rather than the correct inw. As the previous
behavior of QEMU was to return 0xFF and not advance the drive's sector
buffer, DRQ would never be cleared and the bootloader would be blocked
from selecting a secondary ATA device, such as an optical drive.
Resolves:
* [Bug 1639394] Unable to boot Solaris 8/9 x86 under Fedora 24
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220520235200.1138450-1-lkujaw@member.fsf.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since KVM commit 5f76f6f5ff96 ("KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled")
it is not possible to disable MPX on a "-cpu host" just by adding "-mpx"
there if the host CPU does indeed support MPX.
QEMU will fail to set MSR_IA32_VMX_TRUE_{EXIT,ENTRY}_CTLS MSRs in this case
and so trigger an assertion failure.
Instead, besides "-mpx" one has to explicitly add also
"-vmx-exit-clear-bndcfgs" and "-vmx-entry-load-bndcfgs" to QEMU command
line to make it work, which is a bit convoluted.
Make the MPX-related bits in FEAT_VMX_{EXIT,ENTRY}_CTLS dependent on MPX
being actually enabled so such workarounds are no longer necessary.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <51aa2125c76363204cc23c27165e778097c33f0b.1653323077.git.maciej.szmigiero@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several functions have a local variable that is just a copy of one of
the function parameters. This is unneeded complication so just get rid
of these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <d959aa0b267eb139a994e41ca0b7ba87d9cef7a9.1650706617.git.balaton@eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The warm_reset() and cold_reset() functions are not implemented and do
nothing so no point in calling them or keep around as dead code.
Therefore remove them for now.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <cc6e99fd498a9ae358ebce787fc04ab6e8201879.1650706617.git.balaton@eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ELF header checking to prevent processing input file which is not
QEMU x86_64 guest memory dump or even not ELF.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1013
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220520084339.171684-1-viktor.prutyanov@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just setting the max threads to 0 is enough to stop all workers.
Message-Id: <20220514065012.1149539-4-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
