The next patch needs two new rate control functions. The first
one returns the bytes needed at call time to maintain the
selected rate. The second one adjusts the bytes actually sent.
Split the audio_rate_get_bytes() function into these two
functions and reintroduce audio_rate_get_bytes().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the buffer_get_free pcm_ops function to report the free
ALSA playback buffer. The generic buffer becomes a temporary
buffer and is empty after a call to audio_run_out().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Run the downstream playback queue even if the emulated audio
device didn't write new samples. There still may be buffered
audio samples downstream.
This is for the -audiodev out.mixing-engine=off case. Commit
a8a98cfd42 ("audio: run downstream playback queue uncondition-
ally") fixed the out.mixing-engine=on case.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix GUS audio playback with out.mixing-engine=off.
The GUS audio device needs to know the amount of samples to
produce in advance.
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
and start the cartoon.exe demo in a FreeDOS guest. The demo file
is available on the download page of the GUSemu32 author.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refactoring the code in audio_run_out() avoids code duplication
in the next patch. There's no functional change.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit ab32b78cd1 "audio: Simplify audio_bug() removing old code"
introduced abort() in audio_bug() for regular builds.
audio_bug() was never meant to abort QEMU for the following
reasons.
- There's code in audio_bug() that expects audio_bug() gets
called more than once with error condition true. The variable
'shown' is only 0 on first error.
- All call sites test the return code of audio_bug(), print
an error context message and handle the errror.
- The abort() in audio_bug() enables a class of guest-triggered
aborts similar to the Launchpad Bug #1910603 at
https://bugs.launchpad.net/bugs/1910603.
Fixes: ab32b78cd1 "audio: Simplify audio_bug() removing old code"
Buglink: https://bugs.launchpad.net/bugs/1910603
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220917131626.7521-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sndio is the native API used by OpenBSD, although it has been ported to
other *BSD's and Linux (packages for Ubuntu, Debian, Void, Arch, etc.).
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Alexandre Ratchov <alex@caoua.org>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <YxibXrWsrS3XYQM3@vm1.arverb.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
add a simple help option for -audio and -audiodev
to show the list of available drivers, and document them.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220908081441.7111-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If you specify a known backend but it isn't compiled in, or failed to
initialize, you get a simple warning and the "none" backend as a
fallback, and QEMU runs happily:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
audio: warning: Using timer based audio emulation
...
Instead, QEMU should fail to start:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
$
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1983493
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220822131021.975656-1-marcandre.lureau@redhat.com>
Commit c9c847481 broken dbus audio module compilation with bad
'CONFIG_GIO' usage. Furthermore, it implied extra dependency on audio
module which aren't necessary.
The problem was that 'dbus_display' is not correctly automatically set
on MacOS, because opengl dependency wasn't taken into account.
Fixes: c9c847481 ("audio/dbus: Fix building with modules on macOS")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220622154918.560870-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
The unused variables when FLOAT_MIXENG is defined caused warnings on
Apple clang version 13.1.6 (clang-1316.0.21.2).
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220316061053.60587-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The coreaudio library includes Objective-C declarations (using the
caret '^' symbol to declare block references [*]). When building
with a C compiler we get:
[175/839] Compiling C object libcommon.fa.p/audio_coreaudio.c.o
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX12.sdk/System/Library/Frameworks/CoreAudio.framework/Headers/CoreAudio.h:18,
from ../../audio/coreaudio.c:26:
/Library/Developer/CommandLineTools/SDKs/MacOSX12.sdk/System/Library/Frameworks/CoreAudio.framework/Headers/AudioHardware.h:162:2: error: expected identifier or '(' before '^' token
162 | (^AudioObjectPropertyListenerBlock)( UInt32 inNumberAddresses,
| ^
FAILED: libcommon.fa.p/audio_coreaudio.c.o
Rename the file to use the Objective-C default extension (.m) so
meson calls the correct compiler.
[*] https://developer.apple.com/library/archive/documentation/Cocoa/Conceptual/ProgrammingWithObjectiveC/WorkingwithBlocks/WorkingwithBlocks.html
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
handle_voice_change() is a CoreAudio callback function as of CoreAudio type
AudioObjectPropertyListenerProc, and for the latter MacOSX.sdk/System/
Library/Frameworks/CoreAudio.framework/Headers/AudioHardware.h
says "The return value is currently unused and should always be 0.".
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220306123410.61063-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Without this change audio_bug aborts when the bug condition is met,
which discards following useful logs. Call abort after such logs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220306063202.27331-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When configuring QEMU with --enable-modules we get on macOS:
--- stderr ---
Dependency ui-dbus cannot be satisfied
ui-dbus depends on pixman and opengl, so add these dependencies
to audio-dbus.
Fixes: 739362d420 ("audio: add "dbus" audio backend")
Reviewed-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When building on macOS 12 we get:
audio/coreaudio.c:50:5: error: 'kAudioObjectPropertyElementMaster' is deprecated: first deprecated in macOS 12.0 [-Werror,-Wdeprecated-declarations]
kAudioObjectPropertyElementMaster
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kAudioObjectPropertyElementMain
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreAudio.framework/Headers/AudioHardwareBase.h:208:5: note: 'kAudioObjectPropertyElementMaster' has been explicitly marked deprecated here
kAudioObjectPropertyElementMaster API_DEPRECATED_WITH_REPLACEMENT("kAudioObjectPropertyElementMain", macos(10.0, 12.0), ios(2.0, 15.0), watchos(1.0, 8.0), tvos(9.0, 15.0)) = kAudioObjectPropertyElementMain
^
Replace by kAudioObjectPropertyElementMain, redefining it to
kAudioObjectPropertyElementMaster if not available.
Suggested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Suggested-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Otherwise, the audio subsystem tries to use the voice and
eventually aborts due to the maximum number of samples in the
buffer is not set.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220226115953.60335-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the same samples vs. frames mix-up that the previous commit
fixed for the PulseAudio backend.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-15-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that the mixing buffer size no longer adds to playback
latency, fix the samples vs. frames mix-up in the mixing buffer
size calculation. This change will go largely unnoticed as long
as the user doesn't use a buffer-size smaller than timer-period.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-14-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Return the free buffer size for the mmapped case in function
oss_buffer_get_free() to reduce the effective playback buffer
size. All intermediate audio playback buffers become temporary
buffers.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-13-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the buffer_get_free pcm_ops function to reduce the effective
playback buffer size. All intermediate audio playback buffers
become temporary buffers.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the buffer_get_free pcm_ops function to reduce the effective
playback buffer size. All intermediate audio playback buffers
become temporary buffers.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit ff095e5231 "audio: api for mixeng code free backends"
introduced another FIFO for the audio subsystem with exactly the
same size as the mixing-engine FIFO. Most audio backends use
this generic FIFO. The generic FIFO used together with the
mixing-engine FIFO doubles the audio FIFO size, because that's
just two independent FIFOs connected together in series.
For audio playback this nearly doubles the playback latency.
This patch restores the effective mixing-engine playback buffer
size to a pre v4.2.0 size by only accepting the amount of
samples for the mixing-engine queue which the downstream queue
accepts.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220301191311.26695-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit cbaf25d1f5.
Since previous commit every audio backend has a pcm_ops function
table. It's no longer necessary to test if the table is available.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a pcm_ops function table for the capture backend. This avoids
additional code in the next patches to test if the pcm_ops table
is available.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the code to copy the playback stream in sequential order.
The advantage can be seen in the next patches where the stream
copy operation effectively becomes a write through operation.
The following diagram shows the average buffer fill level and
the stream copy sequence. ### represents a timer_period sized
chunk. The rest of the buffer sizes are not to scale.
With current code:
|--------| |#####111| |---#####|
sw->buf mix_buf backend buffer
1. clip
|--------| |---#####| |111##222|
sw->buf mix_buf backend buffer
2. write to audio device
333 -> |--------| |---#####| |---111##| -> 222
sw->buf mix_buf backend buffer
3a. sw device write
|-----333| |---#####| |---111##|
sw->buf mix_buf backend buffer
3b. resample and mix
|--------| |333#####| |---111##|
sw->buf mix_buf backend buffer
With this patch:
111 -> |--------| |---#####| |---#####|
sw->buf mix_buf backend buffer
1a: sw device write
|-----111| |---#####| |---#####|
sw->buf mix_buf backend buffer
1b. resample and mix
|--------| |111##222| |---#####|
sw->buf mix_buf backend buffer
2. clip
|--------| |---111##| |222##333|
sw->buf mix_buf backend buffer
3. write to audio device
|--------| |---111##| |---222##| -> 333
sw->buf mix_buf backend buffer
The effective total playback buffer size is reduced by
timer_period.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch reduces the effective qemu playback buffer size
by timer-period. Increase the number of jack audio buffers by
one to preserve the total effective buffer size. The size of one
jack audio buffer is 512 samples. With audio defaults that's
512 samples / 44100 samples/s = 11.6 ms and only slightly larger
than the timer-period of 10 ms.
The larger jack audio buffer increases audio dropout safety,
because the high priority jack-audio worker threads can provide
audio data for a longer period of time as with a smaller buffer
and more audio data in the mixing engine buffer that they can't
access.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20220301191311.26695-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a patch to improve the pulseaudio playback experience.
Asking pulseaudio for a playback latency of 15ms is quite
demanding. Increase this to 46ms. The total playback latency
now is 31ms larger. One of the next patches will reduce the
total playback latency again by more than 46ms.
Here is a quote from the PulseAudio Latency Control
documentation: 'For the sake of (...) drop-out safety always
make sure to pick the highest latency possible that fulfills
your needs.'
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify code by inlining function audio_pcm_sw_get_rpos_in()
at the only call site and remove the duplicated audio_bug()
test.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function audio_pcm_hw_conv_in() similar to the existing
counterpart function audio_pcm_hw_clip_out(). This function reduces
the number of calls to the pcm_ops functions get_buffer_in() and
put_buffer_in(). That's one less call to get_buffer_in() and
put_buffer_in() every time the conv_buffer wraps around.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the function audio_pcm_hw_clip_out() into the correct
section 'Hard voice (playback)'.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace open-coded buffer arithmetic with the new function
audio_ring_posb(). That's the position in backward direction
of a given point at a given distance.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220301191311.26695-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.
From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'
Change the code to read up to the read cursor instead of the
capture cursor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.
The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.
From the jack_set_thread_creator() documentation:
(...)
No normal application/client should consider calling this. (...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This brings a change that makes audio drivers more similar to all
other modules. All drivers are built by default, while
--audio-drv-list only governs the default choice of the audio driver.
Meson options are added to disable the drivers, and the next patches
will fix the help messages and command line options, and especially
make the non-default drivers available via -audiodev.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ever since winwaveaudio was removed in 2015, CONFIG_AUDIO_WIN_INT
is only set if dsound is in use, so use CONFIG_AUDIO_DSOUND directly.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The audio migration vmstate is empty, and always has been; we can't
just remove it though because an old qemu might send it us.
Changes with -audiodev now mean it's sometimes created when it didn't
used to be, and can confuse migration to old qemu.
Change it so that vmstate_audio is never sent; if it's received it
should still be accepted, and old qemu's shouldn't be too upset if it's
missing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210809170956.78536-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-9-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On macOS 11.3.1, Core Audio calls AudioDeviceIOProc after calling an
internal function named HALB_Mutex::Lock(), which locks a mutex in
HALB_IOThread::Entry(void*). HALB_Mutex::Lock() is also called in
AudioObjectGetPropertyData, which is called by coreaudio driver.
Therefore, a deadlock will occur if coreaudio driver calls
AudioObjectGetPropertyData while holding a lock for a mutex and tries
to lock the same mutex in AudioDeviceIOProc.
audioDeviceIOProc, which implements AudioDeviceIOProc in coreaudio
driver, requires an exclusive access for the device configuration and
the buffer. Fortunately, a mutex is necessary only for the buffer in
audioDeviceIOProc because a change for the device configuration occurs
only before setting up AudioDeviceIOProc or after stopping the playback
with AudioDeviceStop.
With this change, the mutex owned by the driver will only be used for
the buffer, and the device configuration change will be protected with
the implicit iothread mutex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210622201740.38005-1-akihiko.odaki@gmail.com
Message-Id: <20210622201740.38005-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before commit 7d6948cd98, it was coded to
retrieve the initial output stream format settings, modify the frame
rate, and set again. However, I removed a frame rate modification code by
mistake in the commit. It also assumes the initial output stream format
is consistent with what QEMU expects, but that expectation is not in the
code, which makes it harder to understand and will lead to breakage if
the initial settings change.
This change explicitly sets all of the output stream settings to solve
these problems.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210616141721.54091-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with jackaudio client name and qemu guest name unset,
the JACK client names are out-(NULL) and in-(NULL). These names
are user visible in the patch bay. Replace the function call to
qemu_get_vm_name() with a call to audio_application_name() which
replaces NULL with "qemu" to have more descriptive names.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the code to generate the pa_context_new() application name
argument to a function in audio/audio.c. The new function
audio_application_name() will also be used in the jackaudio
backend.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In current code there are no calls to pa_stream_get_latency()
or pa_stream_get_time() to receive latency or time information.
Remove the flags PA_STREAM_INTERPOLATE_TIMING and
PA_STREAM_AUTO_TIMING_UPDATE which instruct PulseAudio to
calculate this information in regular intervals.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Merge the #ifdef DEBUG code with the if statement a few lines
above to avoid bit rot.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An output device change can occur when plugging or unplugging an
earphone.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210311151512.22096-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Mac OS X 10.6 was released in 2009.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210311151512.22096-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Delete spaces between function name and open parenthesis'('
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-8-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the line width of code.
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-5-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix problems about braces:
-braces are necessary for all arms of if/for/while statements
-else should follow close brace '}'
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-2-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a mismatch between message and used argument. Change
the argument from frequency to format.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-23-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename dsound_open() to dsound_set_cooperative_level(). The
only task of that function is to set the cooperative level for
DirectSound.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-21-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GetForegroundWindow() doesn't necessarily return the own window
handle. It just returns a handle to the currently active window
and can even return NULL. At the time dsound_open() gets called
the active window is most likely the shell window and not the
QEMU window.
Replace GetForegroundWindow() with GetDesktopWindow() which
always returns a valid window handle, and at the same time
replace the DirectSound buffer flag DSBCAPS_STICKYFOCUS with
DSBCAPS_GLOBALFOCUS where Windows only expects a valid window
handle for DirectSound function SetCooperativeLevel(). The
Microsoft online docs for IDirectSound::SetCooperativeLevel
recommend this in the remarks.
This fixes a bug where you can't hear sound from the guest.
To reproduce start qemu with -machine pcspk-audiodev=audio0
-device intel-hda -device hda-duplex,audiodev=audio0
-audiodev dsound,id=audio0,out.mixing-engine=off
from a shell and start audio playback with the hda device in the
guest. The guest will be silent. To hear guest audio you have to
activate the shell window once.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-20-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tell PulseAudio to send recorded audio data in smaller chunks
than timer_period, so there's a good chance that qemu can read
recorded audio data every time it looks for new data.
PulseAudio tries to send buffer updates at a fragsize / 2 rate.
With fragsize = timer_period / 2 * 3 the update rate is 75% of
timer_period. The lower limit for the recording buffer size
maxlength is fragsize * 2.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-19-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with the playback buffer attribute minreq = -1 and flag
PA_STREAM_EARLY_REQUESTS PulseAudio uses minreq = tlength / 4.
To improve audio playback with larger PulseAudio server side
buffers, limit minreq to a maximum of 75% of audio timer_rate.
That way there is a good chance qemu receives a stream buffer
size update before it tries to write data to the playback stream.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-18-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The audio buffer size in audio/paaudio.c is typically larger
than expected. Just comment the bugs in qpa_init_in() and
qpa_init_out() for now. Fixing these bugs may break glitch free
audio playback with fine tuned user audio settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-17-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_get_buffer_out()
before the playback stream is ready. This prevents a lot of the
following pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0 -audiodev pa,id=audio0
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-15-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_write() before the
playback stream is ready. This prevents a lot of the following
pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-14-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pulseaudio backend currently converts, clips and copies audio
playback samples in the mixing-engine sample buffer multiple
times.
In qpa_get_buffer_out() the function pa_stream_begin_write()
returns a rather large buffer and this allows audio_pcm_hw_run_out()
in audio/audio.c to copy all samples in the mixing-engine buffer
to the pulse audio buffer. Immediately after copying, qpa_write()
notices with a call to pa_stream_writable_size() that pulse audio
only needs a smaller part of the copied samples and ignores the
rest. This copy and ignore process happens several times for each
audio sample.
To fix this behaviour, call pa_stream_writable_size() in
qpa_get_buffer_out() to limit the number of samples
audio_pcm_hw_run_out() will convert. With this change the
pulseaudio pcm_ops functions put_buffer_out and write are no
longer identical and a separate qpa_put_buffer_out is needed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-13-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Break the unnecessary dependency of the generic buffer management
code on mixing-engine. This is required for the next patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add audio recording functions. SDL 2.0.5 or later is required to
use the recording functions. Playback continues to work with
earlier SDL 2.0 versions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split off pcm_ops function run_buffer_in from get_buffer_in and
call run_buffer_in before get_buffer_in.
The next patch only needs the generic buffer management part
from audio_generic_get_buffer_in().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the modern audio functions it's possible to add new
features like audio recording.
As a side effect this patch fixes a bug where SDL2 can't be used
on Windows. This bug was reported on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg04043.html
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fill the remaining sample buffer with silence. To fill it with
zeroes is wrong for unsigned samples because this is silence
with a DC bias.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always fill the remaining audio callback buffer with silence.
SDL 2.0 doesn't initialize the audio callback buffer. This was
an incompatible change compared to SDL 1.2. For reference read
the SDL 1.2 to 2.0 migration guide.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device. This patch
keeps the SDL2 device pause state in sync with hw->enabled.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Check whenever we actually found the spiceaudio driver
before flipping the can_be_default field.
Fixes: f0c4555edf ("audio: remove qemu_spice_audio_init()")
Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977301
Reported-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201215081151.20095-1-kraxel@redhat.com>
This code (introduced in commit 1d14ffa97e, Oct 2005)
is likely unused since years. Time to remove it. If
the condition is true, simply call abort().
Suggested-by: Gerd Hoffmann <gerd@kraxel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201210223506.263709-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit removed the last call site of
audio_is_cleaning_up(). Remove the now unused function.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always stop audio playback and remove the playback callback when
QEMU exits.
On shut down the function coreaudio_fini_out() destroys the
coreaudio mutex but fails to stop audio playback and to remove the
audio playback callback, because function audio_is_cleaning_up()
always returns true when called from coreaudio_fini_out(). Now
there is a time window from pthread_mutex_destroy() to program
exit where Core Audio may call the audio playback callback which
tries to lock the destroyed coreaudio mutex. This leads to the
following error.
coreaudio: Could not lock voice for audioDeviceIOProc
Reason: Invalid argument
This bug was reported on the qemu-discuss mailing list.
https://lists.nongnu.org/archive/html/qemu-discuss/2020-10/msg00018.html
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device to keep the
Core Audio device run state in sync with hw->enabled.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the variable once was used to fake audio settings, since
commit ed2a4a7941 "audio: proper support for float samples in
mixeng" this is no longer true. Rename the variable to obt_as.
This is the same naming scheme as in audio/sdlaudio.c
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change registers a bottom handler to close the JACK client
connection when a server shutdown signal is received. Without this
libjack2 attempts to "clean up" old clients and causes a use after free
segfault.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20201108063351.35804-2-geoff@hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
