The pSeries machine does not support asymmetrical NUMA
configurations. This doesn't make much of a different
since we're not using user input for pSeries NUMA setup,
but this will change in the next patches.
To avoid breaking existing setups, gate this change by
checking for legacy NUMA support.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes to come to NUMA support are all guest visible. In
theory we could just create a new 5_1 class option flag to
avoid the changes to cascade to 5.1 and under. The reality is that
these changes are only relevant if the machine has more than one
NUMA node. There is no need to change guest behavior that has
been around for years needlesly.
This new helper will be used by the next patches to determine
whether we should retain the (soon to be) legacy NUMA behavior
in the pSeries machine. The new behavior will only be exposed
if:
- machine is pseries-5.2 and newer;
- more than one NUMA node is declared in NUMA state.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Builds enabling GCOV can be bigger than 4MB and the limit on FSP
systems is 16MB.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201002091440.1349326-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-14-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-13-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", add a bool return value to
spapr_realize_vcpu() and use it in spapr_cpu_core_realize()
in order to get rid of the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-12-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-11-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of visit_check_struct() and visit_check_list()
for error checking instead of local_err. This allows to get rid of
the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-10-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of spapr_irq_findone() and spapr_irq_claim()
to detect failures. This allows to reduce the error propagation
overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-8-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the return value of ppc_set_compat_all() to check failures,
which is preferred over hijacking local_err.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-7-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cas_check_pvr() function has two purposes:
- finding the "best" logical PVR, ie. the most recent one supported by
the guest for this CPU type
- checking if the guest supports the real PVR of this CPU type, which
is just an optional extra information to workaround the lack of
support for "compat" mode in PR KVM
This logic doesn't need error reporting, really. If we don't find a
suitable logical PVR, we return the special value 0 which is definitely
not a valid PVR. Let the caller decide on whether it should error out
or not.
This doesn't change the behavior.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-6-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that ppc_set_compat() indicates success/failure with a return
value, use it and reduce error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-5-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VMState handlers are supposed to return negative errno values on failure.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-4-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", indicate success / failure with a
return value. Since ppc_set_compat() is called from a VMState handler,
let's make it an int so that it propagates any negative errno returned
by kvmppc_set_compat(). Do the same for ppc_set_compat_all() for
consistency, even if it isn't called in a context where a negative errno
is required on failure.
This will allow to simplify error handling in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-3-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The nested KVM code does not yet support HPT guests. Calling the
KVM_CAP_PPC_ALLOC_HTAB ioctl currently leads to KVM setting the guest
as HPT and erroneously executing code in L1 that should only run in
hypervisor mode, leading to an exception in the L1 vcpu thread when it
enters the nested guest.
This can be reproduced with -machine max-cpu-compat=power8 in the L2
guest command line.
The KVM code has since been modified to fail the ioctl when running in
a nested environment so QEMU needs to be able to handle that. This
patch provides an error message informing the user about the lack of
support for HPT in nested guests.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200911043123.204162-1-farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the KVM PMU setup part of fdt_add_pmu_nodes() to
virt_cpu_post_init(), which is a more appropriate location. Now
fdt_add_pmu_nodes() is also named more appropriately, because it
no longer does anything but fdt node creation.
No functional change intended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll add more to this new function in coming patches so we also
state the gic must be created and call it below create_gic().
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we compile without KVM support !defined(CONFIG_KVM) we generate
stubs for functions that the linker will still encounter. Sometimes
these stubs can be executed safely and are placed in paths where they
get executed with or without KVM. Other functions should never be
called without KVM. Those functions should be guarded by kvm_enabled(),
but should also be robust to refactoring mistakes. Putting a
g_assert_not_reached() in the function should help. Additionally,
the g_assert_not_reached() calls may actually help the linker remove
some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't
necessary at all - the only caller is in kvm.c
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update against Linux 5.9-rc7.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "BCM2835 ARM Peripherals" datasheet [*] chapter 2
("Auxiliaries: UART1 & SPI1, SPI2"), list the register
sizes as 3/8/16/32 bits. We assume this means this
peripheral allows 8-bit accesses.
This was not an issue until commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
The model is implemented as 32-bit accesses (see commit 97398d900c,
all registers are 32-bit) so replace MemoryRegionOps.valid as
MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid
with a 8/32-bit range.
[*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002181032.1899463-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Original commit did not allocate IRQs for the SMMUv3 in the irqmap
effectively using irq 0->3 (shared with other devices). Assuming
original intent was to allocate unique IRQs then add an allocation
to the irqmap.
Fixes: e9fdf45324 ("hw/arm: Add arm SBSA reference machine, devices part")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-3-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUv3 has an error in a previous patch where an i was transposed to a 1
meaning interrupts would not have been correctly assigned to the SMMUv3
instance.
Fixes: 48ba18e6d3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state")
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-2-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002080935.1660005-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix integer handling issues handling issue reported by Coverity:
hw/ssi/npcm7xx_fiu.c: 162 in npcm7xx_fiu_flash_read()
>>> CID 1432730: Integer handling issues (NEGATIVE_RETURNS)
>>> "npcm7xx_fiu_cs_index(fiu, f)" is passed to a parameter that cannot be negative.
162 npcm7xx_fiu_select(fiu, npcm7xx_fiu_cs_index(fiu, f));
hw/ssi/npcm7xx_fiu.c: 221 in npcm7xx_fiu_flash_write()
218 cs_id = npcm7xx_fiu_cs_index(fiu, f);
219 trace_npcm7xx_fiu_flash_write(DEVICE(fiu)->canonical_path, cs_id, addr,
220 size, v);
>>> CID 1432729: Integer handling issues (NEGATIVE_RETURNS)
>>> "cs_id" is passed to a parameter that cannot be negative.
221 npcm7xx_fiu_select(fiu, cs_id);
Since the index of the flash can not be negative, return an
unsigned type.
Reported-by: Coverity (CID 1432729 & 1432730: NEGATIVE_RETURNS)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200919132435.310527-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect all MIPS store instructions in cpu_signal_handler for all available
MIPS versions, and set is_write if encountering such store instructions.
This fixed the error while dealing with self-modified code for MIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Kele Huang <kele.hwang@gmail.com>
Signed-off-by: Xu Zou <iwatchnima@gmail.com>
Message-Id: <20201002081420.10814-1-kele.hwang@gmail.com>
[rth: Use uintptr_t for pc to fix n32 build error.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmp_vec opcode is mandatory; this symbol is unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the two arguments are identical, this can be reduced to
dup_vec or to mov_vec from a tcg_constant_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The definition of INDEX_op_dupi_vec is that it operates on
units of tcg_target_ulong -- in this case 32 bits. It does
not work to use this for a uint64_t value that happens to be
small enough to fit in tcg_target_ulong.
Fixes: d2fd745fe8
Fixes: db432672dc
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change wrongly stated that 32-bit avx2 should have
used VPBROADCASTW. But that's a 16-bit broadcast and we want a
32-bit broadcast.
Fixes: 7b60ef3264
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last user of this field disappeared in f69d277ece.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are easier to set and test when they have their own fields.
Reduce the size of alias_index and sort_index to 4 bits, which is
sufficient for TCG_MAX_OP_ARGS. This leaves only the bits indicating
constants within the ct field.
Move all initialization to allocation time, rather than init
individual fields in process_op_defs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This uses an existing hole in the TCGArgConstraint structure
and will be convenient for keeping the data in one place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With larger vector sizes, it turns out oprsz == maxsz, and we only
need to represent mismatch for oprsz <= 32. We do, however, need
to represent larger oprsz and do so without reducing SIMD_DATA_BITS.
Reduce the size of the oprsz field and increase the maxsz field.
Steal the oprsz value of 24 to indicate equality with maxsz.
Tested-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
-----BEGIN PGP SIGNATURE-----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=T7wc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging
* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
# gpg: Signature made Tue 06 Oct 2020 19:17:46 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Message-Id: <20200806105349.632-10-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel Henrique Barboza