Something is wrong with this code, and also wrong with gdb on the
sparc systems to which I have access, so I cannot debug it either.
Disable for now, so the release is not broken.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Assign pc and use store_release to assign tb.
Fixes: 2dd5b7a1b9 ("accel/tcg: Move jmp-cache `CF_PCREL` checks to caller")
Reported-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUs often set CF_PCREL in tcg_cflags before qemu_init_vcpu(), in which
tcg_cflags will be overwrited by tcg_cpu_init_cflags().
Fixes: 4be790263f ("accel/tcg: Replace `TARGET_TB_PCREL` with `CF_PCREL`")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Message-Id: <20230331150609.114401-6-liweiwei@iscas.ac.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Exercise guests with a few different modes for interrupt delivery. In
particular we want to cover:
• Xen event channel delivery via GSI to the I/O APIC
• Xen event channel delivery via GSI to the i8259 PIC
• MSIs routed to PIRQ event channels
• GSIs routed to PIRQ event channels
As well as some variants of normal non-Xen stuff like MSI to vAPIC and
PCI INTx going to the I/O APIC and PIC, which ought to still work even
in Xen mode.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-12-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-11-alex.bennee@linaro.org>
Currently our NetBSD VM recipe requests instal of the python37 package
and explicitly tells QEMU to use that version of python. Since the
NetBSD base ISO was updated to version 9.3 though, the default system
python version is 3.9 which is sufficiently new for QEMU to rely on.
Rather than requesting an older python, just test against the default
system python which is what most users will have.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124601.822209-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-10-alex.bennee@linaro.org>
The 'check' script will use "#!/usr/bin/env python3" by default
to locate python, but this doesn't work in distros which lack a
bare 'python3' binary like NetBSD.
We need to explicitly invoke 'check' by referring to the 'python'
variable in meson, which resolves to the detected python binary
that QEMU intends to use.
This fixes a regression introduced by
commit 51ab5f8bd7
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 15 17:43:23 2023 +0000
iotests: register each I/O test separately with meson
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124539.822022-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230403134920.2132362-9-alex.bennee@linaro.org>
Someone mentioned this on IRC so I thought I would try it out with a
few commits that are pure code style fixes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-7-alex.bennee@linaro.org>
We don't update these often but now at least we have a few like minded
individuals keeping reviewers eye out for changes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-5-alex.bennee@linaro.org>
The later handler if conditionally compiled only for Linux but we
forgot to ensure we don't advertise it lest we confuse our BSD
brethren.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 51c623b0de ("gdbstub: add support to Xfer:auxv:read: packet")
Reported-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Tested-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230403134920.2132362-4-alex.bennee@linaro.org>
It is pointless to build libgdb_user.fa in a system-only build
(or libgdb_softmmu.fa in a user-only build). Besides, in some
restricted build configurations, some APIs might be restricted /
not available. Example in a KVM-only builds where TCG is disabled:
$ ninja qemu-system-x86_64
[99/2187] Compiling C object gdbstub/libgdb_user.fa.p/user.c.o
FAILED: gdbstub/libgdb_user.fa.p/user.c.o
../../gdbstub/user.c: In function ‘gdb_breakpoint_insert’:
../../gdbstub/user.c:438:19: error: implicit declaration of function ‘cpu_breakpoint_insert’; did you mean ‘gdb_breakpoint_insert’? [-Werror=implicit-function-declaration]
438 | err = cpu_breakpoint_insert(cpu, addr, BP_GDB, NULL);
| ^~~~~~~~~~~~~~~~~~~~~
| gdb_breakpoint_insert
../../gdbstub/user.c:438:19: error: nested extern declaration of ‘cpu_breakpoint_insert’ [-Werror=nested-externs]
../../gdbstub/user.c: In function ‘gdb_breakpoint_remove’:
../../gdbstub/user.c:459:19: error: implicit declaration of function ‘cpu_breakpoint_remove’; did you mean ‘gdb_breakpoint_remove’? [-Werror=implicit-function-declaration]
459 | err = cpu_breakpoint_remove(cpu, addr, BP_GDB);
| ^~~~~~~~~~~~~~~~~~~~~
| gdb_breakpoint_remove
../../gdbstub/user.c:459:19: error: nested extern declaration of ‘cpu_breakpoint_remove’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
ninja: build stopped: subcommand failed.
Fixes: 61b2e136db ("gdbstub: only compile gdbstub twice for whole build")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230329161852.84992-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-3-alex.bennee@linaro.org>
This reverts commit 4f5c67f8df.
This exposes bugs in target_mmap et al with respect to overflow
with the final page of the guest address space. To be fixed in
the next development cycle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a very rough and ready first pass at comparing gcovr's json
output between two different runs. At the moment it will give you a
file level diff between two runs but hopefully it wont be too hard to
extend to give better insight.
After generating the coverage results you run with something like:
./scripts/coverage/compare_gcov_json.py \
-a ./builds/gcov.config1/coverage.json \
-b ./builds/gcov.config2/coverage.json
My hope is we can use this to remove some redundancy from testing as
well as evaluate if new tests are actually providing additional
coverage or just burning our precious CI time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230403134920.2132362-2-alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZCwLXQAKCRBAov/yOSY+
3zwUA/9d2ddHxGEBTMyF45bzc9JxRF6HoILAwMLsmPWqspPgKdGuviMVewJLt5m8
V75/BC6Sn9rhdkXALvZMRV6WQ2A16pByUaQtMYAXVsIoV8Mrpvm4GwJD1E0/cy5Q
TwDTzpDfys9WsTVj0QlCPjp0JW+KA7Y6ArMUUCdCz41L2r7mPA==
=ovw7
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230404' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230404
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZCwLXQAKCRBAov/yOSY+
# 3zwUA/9d2ddHxGEBTMyF45bzc9JxRF6HoILAwMLsmPWqspPgKdGuviMVewJLt5m8
# V75/BC6Sn9rhdkXALvZMRV6WQ2A16pByUaQtMYAXVsIoV8Mrpvm4GwJD1E0/cy5Q
# TwDTzpDfys9WsTVj0QlCPjp0JW+KA7Y6ArMUUCdCz41L2r7mPA==
# =ovw7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Apr 2023 12:34:53 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230404' of https://gitlab.com/gaosong/qemu:
target/loongarch: Enables plugins to get instruction codes
hw/loongarch/virt: Fix virt_to_phys_addr function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I'm leaving Red Hat next week, so clean up the maintainer entries.
'virtiofs' is just the device code now, so is pretty small, and
Stefan is still a maintainer there.
'migration' still has Juan.
For 'HMP' I'll swing that over to my personal email.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20230330095524.37691-1-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt addr should mask TARGET_PHYS_ADDR_SPACE_BITS to
get the phys addr, and this is used by loading kernel elf.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230327112313.3042829-1-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In commit 049edada we added some code to handle HSTR_EL2 traps, which
we did as an inline "conditionally branch over a
gen_exception_insn()". Unfortunately this fails to take account of
the fact that gen_exception_insn() will set s->base.is_jmp to
DISAS_NORETURN. That means that at the end of the TB we won't
generate the necessary code to handle the "branched over the trap and
continued normal execution" codepath. The result is that the TCG
main loop thinks that we stopped execution of the TB due to a
situation that only happens when icount is enabled, and hits an
assertion. Explicitly set is_jmp back to DISAS_NEXT so we generate
the correct code for when execution continues past this insn.
Note that this only happens for cpreg reads; writes will call
gen_lookup_tb() which generates a valid end-of-TB.
Fixes: 049edada ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1551
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230330101900.2320380-1-peter.maydell@linaro.org
At this moment, arm_load_dtb() can free machine->fdt when
binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be
retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is
the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to
machine->fdt. And, in that case, the existing g_free(fdt) at the end of
arm_load_dtb() will make machine->fdt point to an invalid memory region.
Since monitor command 'dumpdtb' was introduced a couple of releases
ago, running it with any ARM machine that uses arm_load_dtb() will
crash QEMU.
Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead
of freeing 'fdt', assign it back to ms->fdt.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Fixes: bf353ad555 ("qmp/hmp, device_tree.c: introduce dumpdtb")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20230328165935.1512846-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aarch64_gdb_get_pauth_reg() -- although disabled since commit
5787d17a42 ("target/arm: Don't advertise aarch64-pauth.xml to
gdb") is still compiled in. It calls pauth_ptr_mask() which is
located in target/arm/tcg/pauth_helper.c, a TCG specific helper.
To avoid a linking error when TCG is not enabled:
Undefined symbols for architecture arm64:
"_pauth_ptr_mask", referenced from:
_aarch64_gdb_get_pauth_reg in target_arm_gdbstub64.c.o
ld: symbol(s) not found for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
- Inline pauth_ptr_mask() in aarch64_gdb_get_pauth_reg()
(this is the single user),
- Rename pauth_ptr_mask_internal() as pauth_ptr_mask() and
inline it in "internals.h",
Fixes: e995d5cce4 ("target/arm: Implement gdbstub pauth extension")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230328212516.29592-1-philmd@linaro.org
[PMM: reinstated doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When liblzfe (Apple LZFSE compression library) is present
(for example installed via 'brew') on Darwin, QEMU build
fails as:
Has header "lzfse.h" : YES
Library lzfse found: YES
Dependencies
lzo support : NO
snappy support : NO
bzip2 support : YES
lzfse support : YES
zstd support : YES 1.5.2
User defined options
dmg : enabled
lzfse : enabled
[221/903] Compiling C object libblock.fa.p/block_dmg-lzfse.c.o
FAILED: libblock.fa.p/block_dmg-lzfse.c.o
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:56:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_encode_scratch_size();
^
void
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:94:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_decode_scratch_size();
^
void
2 errors generated.
ninja: build stopped: subcommand failed.
This issue has been reported in the lzfse project in 2016:
https://github.com/lzfse/lzfse/issues/3#issuecomment-226574719
Since the project seems unmaintained, simply ignore the
strict-prototypes warning check for the <lzfse.h> header,
similarly to how we deal with the GtkItemFactoryCallback
prototype from <gtk/gtkitemfactory.h>, indirectly included
by <gtk/gtk.h>.
Cc: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20230327151349.97572-1-philmd@linaro.org>
Devices models calling pmbus_send_string can't be relied upon to
send a non-zero pointer. This logs an error and doesn't segfault.
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322175513.1550412-5-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that the previous commit ("hw/mips/gt64xxx_pci: Don't
endian-swap GT_PCI0_CFGADDR") fixed the issue accessing
the GT64120 PCI config-address register on big-endian
targets, we can enable this TuxRun test.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230223220404.63630-1-philmd@linaro.org>
145e2198d7 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE
MemoryRegionOps") converted CFGADDR/CFGDATA registers to use
PCI_HOST_BRIDGE's accessor facility and enabled byte swap for both
CFGADDR/CFGDATA register.
However CFGADDR as a ISD internal register is not controlled by
MByteSwap bit, it follows endian of all other ISD register, which
means it ties to little endian.
Move mapping of CFGADDR out of gt64120_update_pci_cfgdata_mapping
to disable endian-swapping.
Fixes: 145e2198d7 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Message-Id: <20230223161958.48696-1-jiaxun.yang@flygoat.com>
[PMD: !!! Note this only fixes little-endian hosts !!! ]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per the release 6.06 revision history:
5.03 August 21, 2013
• ABS2008 and NAN2008 fields of Table 5.7 “FCSR RegisterField
Descriptions” were optional in release 3 and could be R/W,
but as of release 5 are required, read-only, and preset by
hardware.
The P5600 core implements the release 5, and has the ABS2008
and NAN2008 bits set in CP1_fcr31. Therefore it is able to run
ELF binaries compiled with EF_MIPS_NAN2008, such the CIP United
Debian NaN2008 distribution:
http://repo.oss.cipunited.com/mipsel-nan2008/README.txt
In order to run such compiled binaries, select by default the
P5600 core when the ELF 'MIPS_NAN2008' flag is set.
Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230327162444.388-1-philmd@linaro.org>
The 64-bit SPARC V9 syscall ABI uses 32-bit UIDs. Only enable
the 16-bit UID wrappers for 32-bit SPARC (V7 and V8).
Possibly missed in commit 992f48a036 ("Support for 32 bit
ABI on 64 bit targets (only enabled Sparc64)").
Reported-by: Gregor Riepl <onitake@gmail.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Zach van Rijn <me@zv.io>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1394
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230327131910.78564-1-philmd@linaro.org>
Fix page_set_flags vs the last page of the address space [#1528]
Re-enable gdbstub breakpoints under KVM
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmQjcLIdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8rkgf/ZazodovRKxfaO622
mGW7ywIm+hIZYmKC7ObiMKFrBoCyeXH9yOLSx42T70QstWvBMukjovLMz1+Ttbo1
VOvpGH2B5W76l3i+muAlKxFRbBH2kMLTaL+BXtkmkL4FJ9bS8WiPApsL3lEX/q2E
3kqaT3N3C09sWO5oVAPGTUHL0EutKhOar2VZL0+PVPFzL3BNPhnQH9QcbNvDBV3n
cx3GSXZyL7Plyi+qwsKf/3Jo+F2wr2NVf3Dqscu9T1N1kI5hSjRpwqUEJzJZ5rei
ly/gBXC/J7+WN+x+w2JlN0kWXWqC0QbDfZnj96Pd3owWZ7j4sT9zR5fcNenecxlR
38Bo0w==
=ysF7
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230328' of https://gitlab.com/rth7680/qemu into staging
Use a local version of GTree [#285]
Fix page_set_flags vs the last page of the address space [#1528]
Re-enable gdbstub breakpoints under KVM
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmQjcLIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8rkgf/ZazodovRKxfaO622
# mGW7ywIm+hIZYmKC7ObiMKFrBoCyeXH9yOLSx42T70QstWvBMukjovLMz1+Ttbo1
# VOvpGH2B5W76l3i+muAlKxFRbBH2kMLTaL+BXtkmkL4FJ9bS8WiPApsL3lEX/q2E
# 3kqaT3N3C09sWO5oVAPGTUHL0EutKhOar2VZL0+PVPFzL3BNPhnQH9QcbNvDBV3n
# cx3GSXZyL7Plyi+qwsKf/3Jo+F2wr2NVf3Dqscu9T1N1kI5hSjRpwqUEJzJZ5rei
# ly/gBXC/J7+WN+x+w2JlN0kWXWqC0QbDfZnj96Pd3owWZ7j4sT9zR5fcNenecxlR
# 38Bo0w==
# =ysF7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Mar 2023 23:56:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230328' of https://gitlab.com/rth7680/qemu:
softmmu: Restore use of CPU watchpoint for all accelerators
softmmu/watchpoint: Add missing 'qemu/error-report.h' include
softmmu: Restrict cpu_check_watchpoint / address_matches to TCG accel
linux-user/arm: Take more care allocating commpage
include/exec: Change reserved_va semantics to last byte
linux-user: Pass last not end to probe_guest_base
accel/tcg: Pass last not end to tb_invalidate_phys_range
accel/tcg: Pass last not end to tb_invalidate_phys_page_range__locked
accel/tcg: Pass last not end to page_collection_lock
accel/tcg: Pass last not end to PAGE_FOR_EACH_TB
accel/tcg: Pass last not end to page_reset_target_data
accel/tcg: Pass last not end to page_set_flags
linux-user: Diagnose misaligned -R size
tcg: use QTree instead of GTree
util: import GTree as QTree
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPU watchpoints can be use by non-TCG accelerators.
KVM uses them:
$ git grep CPUWatchpoint|fgrep kvm
target/arm/kvm64.c:1558: CPUWatchpoint *wp = find_hw_watchpoint(cs, debug_exit->far);
target/i386/kvm/kvm.c:5216:static CPUWatchpoint hw_watchpoint;
target/ppc/kvm.c:443:static CPUWatchpoint hw_watchpoint;
target/s390x/kvm/kvm.c:139:static CPUWatchpoint hw_watchpoint;
See for example commit e4482ab7e3 ("target-arm: kvm - add support
for HW assisted debug"):
This adds basic support for HW assisted debug. The ioctl interface
to KVM allows us to pass an implementation defined number of break
and watch point registers. [...]
This partially reverts commit 2609ec2868.
Fixes: 2609ec2868 ("softmmu: Extract watchpoint API from physmem.c")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_watchpoint_insert() calls error_report() which is declared
in "qemu/error-report.h". When moving this code in commit 2609ec2868
("softmmu: Extract watchpoint API from physmem.c") we neglected to
include this header. This works so far because it is indirectly
included by TCG headers -> "qemu/plugin.h" -> "qemu/error-report.h".
Currently cpu_watchpoint_insert() is only built with the TCG
accelerator. When building it with other ones (or without TCG)
we get:
softmmu/watchpoint.c:38:9: error: implicit declaration of function 'error_report' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
error_report("tried to set invalid watchpoint at %"
^
Include "qemu/error-report.h" in order to fix this for non-TCG
builds.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both cpu_check_watchpoint() and cpu_watchpoint_address_matches()
are specific to TCG system emulation. Declare them in "tcg-cpu-ops.h"
to be sure accessing them from non-TCG code is a compilation error.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
User setting of -R reserved_va can lead to an assertion
failure in page_set_flags. Sanity check the value of
reserved_va and print an error message instead. Do not
allocate a commpage at all for m-profile cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte of the image, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Properly truncate tb_last to the end of the page; the comment about
tb_end being past the end of the page being ok is not correct,
considering overflow.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Fixes a bug in the loop comparision where "<= end" would lock
one more page than required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been enforcing host page alignment for the non-R
fallback of MAX_RESERVED_VA, but failing to enforce for -R.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu-user can hang in a multi-threaded fork. One common
reason is that when creating a TB, between fork and exec
we manipulate a GTree whose memory allocator (GSlice) is
not fork-safe.
Although POSIX does not mandate it, the system's allocator
(e.g. tcmalloc, libc malloc) is probably fork-safe.
Fix some of these hangs by using QTree, which uses the system's
allocator regardless of the Glib version that we used at
configuration time.
Tested with the test program in the original bug report, i.e.:
```
void garble() {
int pid = fork();
if (pid == 0) {
exit(0);
} else {
int wstatus;
waitpid(pid, &wstatus, 0);
}
}
void supragarble(unsigned depth) {
if (depth == 0)
return ;
std::thread a(supragarble, depth-1);
std::thread b(supragarble, depth-1);
garble();
a.join();
b.join();
}
int main() {
supragarble(10);
}
```
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/285
Reported-by: Valentin David <me@valentindavid.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-3-cota@braap.org>
[rth: Add QEMU_DISABLE_CFI for all callback using functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- aio-posix: Fix race during epoll upgrade
- vhost-user-blk/VDUSE export: Fix a potential deadlock and an assertion
failure when the export runs in an iothread
- NBD server: Push pending frames after sending reply to fix performance
especially when used with TLS
-----BEGIN PGP SIGNATURE-----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=+vQj
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- aio-posix: Fix race during epoll upgrade
- vhost-user-blk/VDUSE export: Fix a potential deadlock and an assertion
failure when the export runs in an iothread
- NBD server: Push pending frames after sending reply to fix performance
especially when used with TLS
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmQi3s4RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Yz7hAAq9UVPOfr8SF5WjxuZBNifYI13uazp9cG
# UdDC4Be2zNSkw9WGb+thHHjvqyQ49tAmT70bTocNk8VEAjAJ5J4VrCOlyz7pcy2w
# PdJf1RxaUSEV4Fl5lThrUeOv5sX3hSm/Z8X9WLYLjYxOGJOpITkQ0eM7PDwwsiPd
# hXLOAWabcJbx/m2HQphUG5ZoC2omgfY2ICrlr4Bvziak63cT+ZTVfKTvVebtEZ9B
# zn+BfrzDra/rkLJEM9JfgQXjYo3Cxrv5MjYzDpeRCHPwnseZnlbHlE3nrHWYDuLW
# fsd6RpsoOW6mHEx4aO6xLAVu+iIfouVOjV5ZWRvcKw5UyiejW/DkduppERMbWx/y
# Wfq95O/4UjFop3fw+UGGdHtASjnUJM35QR9wo+bM2vS219DLTJ/7mKOhBDajHQy4
# 3ynk39uEnkRyLrKUMvR9qZ7t7pvumXEEA5qtPGJwnvOXm9shlKrJ8f3TzUGBKpQS
# KPYEAJPO/HmyvswsfTmC7Yy5uh2o67nsMdDy7HEq0MZW5+pBpAML+zv4qyQKtDsg
# GzoIL+zd09Yyh+wK9+NPzX9p7DZus7NRlig9byGCpD48gqzeABL6CQotNlm93pgj
# eybiMStrCPIOt8AZM5j8yxh1RBiM2L7sZeTBaFXyQiwrlYOW4xGybivzcwQAEFGN
# iKRB0fttcQE=
# =+vQj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Mar 2023 13:34:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
block/export: Fix graph locking in blk_get_geometry() call
aio-posix: fix race between epoll upgrade and aio_set_fd_handler()
block/export: only acquire AioContext once for vhost_user_server_stop()
nbd/server: push pending frames after sending reply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
