Since d5895fcb (iscsi: Split URL into individual options), creating
qcow2 image on an iscsi LUN fails:
qemu-img create -f qcow2 iscsi://$SERVER/$IQN/0 1G
qemu-img: iscsi://$SERVER/$IQN/0: Could not create image: Invalid
argument
The problem is iscsi_open now expects that transport_name, portal and
target are already parsed into structured options by
iscsi_parse_filename, but it is not called in iscsi_create.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170410075451.21329-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Dropped now superfluous
qdict_put(bs_options, "filename", ...)]
Signed-off-by: Max Reitz <mreitz@redhat.com>
When a block device that is part of a throttle group is hot-unplugged,
we forgot to remove it from the throttle group. This leaves stale
memory around, and causes an easily reproducible crash:
$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
-device virtio-scsi-pci,bus=pci.0 -drive \
id=drive_image2,if=none,format=raw,file=file2,bps=512000,iops=100,group=foo \
-device scsi-hd,id=image2,drive=drive_image2 -drive \
id=drive_image3,if=none,format=raw,file=file3,bps=512000,iops=100,group=foo \
-device scsi-hd,id=image3,drive=drive_image3
{'execute':'qmp_capabilities'}
{'execute':'device_del','arguments':{'id':'image3'}}
{'execute':'system_reset'}
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1428810
Suggested-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170406190847.29347-1-eblake@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
raw_open() expects the caller always passing in the right actual
@options parameter. But when trying to applying snapshot on a RBD
image, bdrv_snapshot_goto() calls raw_open() (by calling the
bdrv_open callback on the BlockDriver) with a NULL @options, and
that will result in a Segmentation fault.
For the other non-raw format drivers, it also makes sense to passing
in the actual options, althought they don't trigger the problem so
far.
Let's prepare a @options by adding the "file" key-value pair to a
copy of the actual options that were given for the node (i.e.
bs->options), and pass it to the callback.
BlockDriver.bdrv_open() expects bs->file to be NULL and just
overwrites it with the result from bdrv_open_child(). That means we
should actually make sure it's NULL because otherwise the child BDS
will have a reference count that is 1 too high. So we unconditionally
invoke bdrv_unref_child() before calling BlockDriver.bdrv_open(), and
we wrap everything in bdrv_ref()/bdrv_unref() so the BDS isn't
deleted in the meantime.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-id: 20170405091909.36357-2-bjsdjshi@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJY7MfPEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccbnCgf+
N6q6oHpcO6LsisYNPxpJ5p/Vnah/DKNgGhCnwCOHXkhv17KJHCIKqHo+07zcRJUk
kO9Yc2g9PaWkgM61NsecnbTc4YE8G5SGrBCRj0o3f5Re8X3OnEi2Or8etaa9o/ZF
qIkRk5SMYE2aQFRzn7Hw7LZ/9cta5DPI6+vCzs//S4mnx06p/068Ai21lAWC4Mxy
8dLbz+0GCXEdr9XRweoQKYTYH5HE+gLpRtzlD4QtbfbGN2qkUtR/DLnHTFCUqJ10
F+GBi440L4A7ZXzHIGKVWSH4wO67X65lnWhEFUhIyXHZqkuZzTwsEfIqR005sMub
hViMFGYv6sEbf+A9sBz1Xw==
=BCcn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-pull-request' into staging
# gpg: Signature made Tue 11 Apr 2017 13:10:55 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-pull-request:
sheepdog: Use bdrv_coroutine_enter before BDRV_POLL_WHILE
block: Fix bdrv_co_flush early return
block: Use bdrv_coroutine_enter to start I/O coroutines
qemu-io-cmds: Use bdrv_coroutine_enter
blockjob: Use bdrv_coroutine_enter to start coroutine
block: Introduce bdrv_coroutine_enter
async: Introduce aio_co_enter
coroutine: Extract qemu_aio_coroutine_enter
tests/block-job-txn: Don't start block job before adding to txn
block: Quiesce old aio context during bdrv_set_aio_context
block: Make bdrv_parent_drained_begin/end public
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When called from main thread, the coroutine should run in the context of
bs. Use bdrv_coroutine_enter to ensure that.
Signed-off-by: Fam Zheng <famz@redhat.com>
bdrv_inc_in_flight and bdrv_dec_in_flight are mandatory for
BDRV_POLL_WHILE to work, even for the shortcut case where flush is
unnecessary. Move the if block to below bdrv_dec_in_flight, and BTW fix
the variable declaration position.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
BDRV_POLL_WHILE waits for the started I/O by releasing bs's ctx then polling
the main context, which relies on the yielded coroutine continuing on bs->ctx
before notifying qemu_aio_context with bdrv_wakeup().
Thus, using qemu_coroutine_enter to start I/O is wrong because if the coroutine
is entered from main loop, co->ctx will be qemu_aio_context, as a result of the
"release, poll, acquire" loop of BDRV_POLL_WHILE, race conditions happen when
both main thread and the iothread access the same BDS:
main loop iothread
-----------------------------------------------------------------------
blockdev_snapshot
aio_context_acquire(bs->ctx)
virtio_scsi_data_plane_handle_cmd
bdrv_drained_begin(bs->ctx)
bdrv_flush(bs)
bdrv_co_flush(bs) aio_context_acquire(bs->ctx).enter
...
qemu_coroutine_yield(co)
BDRV_POLL_WHILE()
aio_context_release(bs->ctx)
aio_context_acquire(bs->ctx).return
...
aio_co_wake(co)
aio_poll(qemu_aio_context) ...
co_schedule_bh_cb() ...
qemu_coroutine_enter(co) ...
/* (A) bdrv_co_flush(bs) /* (B) I/O on bs */
continues... */
aio_context_release(bs->ctx)
aio_context_acquire(bs->ctx)
Note that in above case, bdrv_drained_begin() doesn't do the "release,
poll, acquire" in BDRV_POLL_WHILE, because bs->in_flight == 0.
Fix this by using bdrv_coroutine_enter and enter coroutine in the right
context.
iotests 109 output is updated because the coroutine reenter flow during
mirror job complete is different (now through co_queue_wakeup, instead
of the unconditional qemu_coroutine_switch before), making the end job
len different.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_create associates @co to qemu_aio_context but we poll
blk's context below. If the coroutine yields, it may never get resumed
again.
Use bdrv_coroutine_enter to make sure we are starting the I/O on the
right context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Resuming and especially starting of the block job coroutine, could be issued in
the main thread. However the coroutine's "home" ctx should be set to the same
context as job->blk. Use bdrv_coroutine_enter to ensure that.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
They start the coroutine on the specified context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It's a variant of qemu_coroutine_enter with an explicit AioContext
parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Previously, before test_block_job_start returns, the job can already
complete, as a result, the transactional state of other jobs added to
the same txn later cannot be handled correctly.
Move the block_job_start() calls to callers after
block_job_txn_add_job() calls.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The fact that the bs->aio_context is changing can confuse the dataplane
iothread, because of the now fine granularity aio context lock.
bdrv_drain should rather be a bdrv_drained_begin/end pair, but since
bs->aio_context is changing, we can just use aio_disable_external and
bdrv_parent_drained_begin.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAljreJcACgkQAvw66wEB28JrkgCfVe03jYEjgQZttZJPiYT0PDUD
B+sAoIFfXNa2C97+cn1umziXegjAdf9K
=JD4I
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Fixes a memory leak.
# gpg: Signature made Mon 10 Apr 2017 13:20:39 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: xattr: fix memory leak in v9fs_list_xattr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minor differences from:
Message-Id: <20170405132503.32125-1-alex.bennee@linaro.org>
- dropped new feature patches
- last minute typo fix from Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY62CSAAoJEPvQ2wlanipEu/wH/jNzNMus/zaM/+gS3GWpHer2
/aLkKS/zNHZoYzvDE4JZx3sX4q6HyeRZ0Hu46jWs3WAECgHhjV4Rfn3btK+x/5r8
wtmC0DM59ULbE2e6NjDRdJAocdjU6j9Zu+c09/sfssBLRHCJOGyAH8BEbyhHcmlq
hUqTFvZAuLdko6CWfKjtFv+KQm+za9ypiLIncZZDhUi5vt2PIuUV6qSUyqs5EpwP
JyDlgDD8Rzohq62dWIXYTg5dV7tU6/g9vou7tEUoqhMVTHF1usA++j6yfIpGq3Z5
MGN/63Q9tdSX/Kzot9yrHKdsjQEm7k7/03LKT6BIvM1tk0hjzumHFGJBDFYytVc=
=/8U7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-mttcg-fixups-for-rc2-100417-1' into staging
Final icount and misc MTTCG fixes for 2.9
Minor differences from:
Message-Id: <20170405132503.32125-1-alex.bennee@linaro.org>
- dropped new feature patches
- last minute typo fix from Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
# gpg: Signature made Mon 10 Apr 2017 11:38:10 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-mttcg-fixups-for-rc2-100417-1:
replay: assert time only goes forward
cpus: call cpu_update_icount on read
cpu-exec: update icount after each TB_EXIT
cpus: introduce cpu_update_icount helper
cpus: don't credit executed instructions before they have run
cpus: move icount preparation out of tcg_exec_cpu
cpus: check cpu->running in cpu_get_icount_raw()
cpus: remove icount handling from qemu_tcg_cpu_thread_fn
target/i386/misc_helper: wrap BQL around another IRQ generator
cpus: fix wrong define name
scripts/qemugdb/mtree.py: fix up mtree dump
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the 2.7 release we stated in the ChangeLog that the
minimum glib version for Windows hosts was 2.30, but we
didn't update configure to enforce this because we were
very close to the release at the point where we noticed
the issue, and it only affected building the test suite.
We then forgot that we needed to do it. Fix the omission.
(The reason for the 2.30 requirement is use of
g_dir_make_tmp() -- our fallback implementation uses
mkdtemp(), which isn't available on Windows.)
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1491224655-5776-1-git-send-email-peter.maydell@linaro.org
If we find ourselves trying to add an event to the log where time has
gone backwards it is because a vCPU event has occurred and the
main-loop is not yet aware of time moving forward. This should not
happen and if it does its better to fail early than generate a log
that will have weird behaviour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This ensures each time the vCPU thread reads the icount we update the
master timer_state.qemu_icount field. This way as long as updates are
in BQL protected sections (which they should be) the main-loop can
never come to update the log and find time has gone backwards.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
There is no particular reason we shouldn't update the global system
icount time as we exit each TranslationBlock run. This ensures the
main-loop doesn't have to wait until we exit to the outer loop for
executed instructions to be credited to timer_state.
The prepare_icount_for_run function is slightly tweaked to match the
logic we run in cpu_loop_exec_tb.
Based on Paolo's original suggestion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By holding off updates to timer_state.qemu_icount we can run into
trouble when the non-vCPU thread needs to know the time. This helper
ensures we atomically update timers_state.qemu_icount based on what
has been currently executed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Outside of the vCPU thread icount time will only be tracked against
timers_state.qemu_icount. We no longer credit cycles until they have
completed the run. Inside the vCPU thread we adjust for passage of
time by looking at how many have run so far. This is only valid inside
the vCPU thread while it is running.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As icount is only supported for single-threaded execution due to the
requirement for determinism let's remove it from the common
tcg_exec_cpu path.
Also remove the additional fiddling which shouldn't be required as the
icount counters should all be rectified as you enter the loop.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The lifetime of current_cpu is now the lifetime of the vCPU thread.
However get_icount_raw() can apply a fudge factor if called while code
is running to take into account the current executed instruction
count.
To ensure this is always the case we also check cpu->running.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We should never be running in multi-threaded mode with icount enabled.
There is no point calling handle_icount_deadline here so remove it and
assert !use_icount.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Anything that calls into HW emulation must be protected by the BQL.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
While the configure script generates TARGET_SUPPORTS_MTTCG define, one
of the define is cpus.c is checking wrong name: TARGET_SUPPORT_MTTCG
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since QEMU has been able to build with native Int128 support this was
broken as it attempts to fish values out of the non-existent
structure. Also the alias print was trying to make a %x out of
gdb.ValueType directly which didn't seem to work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It should be moved to the same context as source, before inserting to the
graph.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_replace_child_noperm tries to hand over the quiesce_counter state
from old bs to the new one, but if they are not on the same aio context
this causes unbalance.
Fix this by setting the correct aio context before calling
bdrv_append().
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The assertion is currently failing. We can't require callers to have
write permissions when all they are doing is a read, so comment it out.
Add a FIXME comment in the code so that the check is re-enabled when
copy on read is refactored into its own filter driver.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The documentation and help for qemu-img claims that 'qemu-img create'
will take the '--image-opts' argument. This is not true, so this
patch removes those claims.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If @bs does not have any parents, the only reference to @mirror_top_bs
will be held by the BlockJob object after the bdrv_unref() following
block_job_create(). However, if block_job_create() fails, this reference
will not exist and @mirror_top_bs will have been deleted when we
goto fail.
The issue comes back at all later entries to the fail label: We delete
the BlockJob object before rolling back our changes to the node graph.
This means that we will delete @mirror_top_bs in the process.
All in all, whenever @bs does not have any parents and we go down the
fail path we will dereference @mirror_top_bs after it has been deleted.
Fix this by invoking bdrv_unref() only when block_job_create() was
successful and by bdrv_ref()'ing @mirror_top_bs in the fail path before
deleting the BlockJob object. Finally, bdrv_unref() it at the end of the
fail path after we actually no longer need it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like in the mirror filter driver, we also need to set the image size for
the commit filter driver. This is less likely to be a problem in
practice than for the mirror because we're not at the active layer here,
but attaching new parents to a node in the middle of the chain is
possible, so the size needs to be correct anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
The filter driver that is inserted by the commit job needs to use the
same AioContext as its parent and child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Since commit cd958edb1f, same size console resize is skipped. This
change broke QXL incoming migration in VGA mode,
qemu_spice_display_switch() is no longer called during qxl_post_load(),
because default message surface is of the same size, and during
displaychangelistener registration, PCIQXLDevice.mode is
QXL_MODE_UNDEFINED. This triggers a later crash on refresh:
==2634== Invalid read of size 4
==3516== at 0x65F3050: pixman_image_get_data (in /usr/lib64/libpixman-1.so.0.34.0)
==3516== by 0x6F0CEB: qemu_spice_create_update (spice-display.c:215)
==3516== by 0x6F1CC7: qemu_spice_display_refresh (spice-display.c:502)
==3516== by 0x58CF77: display_refresh (qxl.c:1948)
==3516== by 0x6E8084: do_safe_dpy_refresh (console.c:1591)
==3516== by 0x6E80D5: dpy_refresh (console.c:1604)
==3516== by 0x6E4508: gui_update (console.c:201)
==3516== by 0x81898E: timerlist_run_timers (qemu-timer.c:536)
==3516== by 0x8189D6: qemu_clock_run_timers (qemu-timer.c:547)
==3516== by 0x818D98: qemu_clock_run_all_timers (qemu-timer.c:662)
==3516== by 0x81952A: main_loop_wait (main-loop.c:514)
==3516== by 0x4ADD29: main_loop (vl.c:1898)
One way to solve this is to explicitely call qemu_spice_display_switch()
on entering VGA mode, which is called during qxl_post_load().
Fixes:
"null pointer access on migration resume of systemrescuecd boot menu with qxl-vga"
https://bugs.launchpad.net/qemu/+bug/1679126https://bugzilla.redhat.com/show_bug.cgi?id=1438566
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The NVIDIA BAR5 quirk is targeting an ioport BAR. Some older devices
have a BAR5 which is not ioport and can induce a segfault here. Test
the BAR type to skip these devices.
Link: https://bugs.launchpad.net/qemu/+bug/1678466
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This behavior is not indicated in the datasheet and can confuse the OS.
The TCO can trap NMIs from SERR# or IOCHK# and convert them to SMIs; but
any other TCO event is either delivered as an SMI or completely disabled.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell
Fam Zheng
Eric Blake
Dong Jia Shi
Gerd Hoffmann
Alex Bennée
Nikunj A Dadhania
Li Qiang
Kevin Wolf
Jeff Cody
Max Reitz
Marc-André Lureau
Alex Williamson
Paolo Bonzini