When a coroutine wakes up it may determine that it must re-queue.
Normally coroutines are pushed onto the back of the CoQueue, but for
fairness it may be necessary to push it onto the front of the CoQueue.
Add a flag to specify that the coroutine should be pushed onto the front
of the CoQueue. A later patch will use this to ensure fairness in the
bounce buffer CoQueue used by the blkio BlockDriver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace the existing logic to get the directory for temporary files
with g_get_tmp_dir(), which works for win32 too.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to msdn documentation and Linux man pages, send() should try
to send as much as possible in blocking mode, while recv() may return
earlier with a smaller available amount, we should try to continue
send/recv from there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-3-marcandre.lureau@redhat.com>
With a pipe or other reasons, read/write may return less than the
requested bytes. This happens with the test-io-channel-command test on
Windows. glib spawn code uses a binary pipe of 4096 bytes, and the first
read returns that much (although more are requested), for some unclear
reason...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-2-marcandre.lureau@redhat.com>
As described in:
https://learn.microsoft.com/en-us/visualstudio/debugger/how-to-set-a-thread-name-in-native-code?view=vs-2022
SetThreadDescription() is available since Windows 10, version 1607 and
in some versions only by "Run Time Dynamic Linking". Its declaration is
not yet in mingw, so we lookup the function the same way glib does.
Tested with Visual Studio Community 2022 debugger.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-23-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_get_aio_context inspects a coroutine, but it does
not have to be called from the coroutine itself (or from any
coroutine).
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_socketpair() will create a pair of connected sockets
with FD_CLOEXEC set
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <17fa1eff729eeabd9a001f4639abccb127ceec81.1661240709.git.tugy@chinatelecom.cn>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
=eMUT
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
# KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
# Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
# JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
# ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
# wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
# =eMUT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Sep 2022 02:30:35 EDT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (21 commits)
net: tulip: Restrict DMA engine to memories
net/colo.c: Fix the pointer issue reported by Coverity.
vdpa: Delete CVQ migration blocker
vdpa: Add virtio-net mac address via CVQ at start
vhost_net: add NetClientState->load() callback
vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
vdpa: Move command buffers map to start of net device
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vhost_net: Add NetClientInfo stop callback
vhost_net: Add NetClientInfo start callback
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost: Delete useless read memory barrier
vhost: use SVQ element ndescs instead of opaque data for desc validation
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring
vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd
vdpa: Make SVQ vring unmapping return void
vdpa: Remove SVQ vring from iova_tree at shutdown
util: accept iova_tree_remove_parameter by value
vdpa: do not save failed dma maps in SVQ iova tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support for the unix socket has existed both in BSD and Linux for the
longest time, but not on Windows. Since Windows 10 build 17063 [1],
the native support for the unix socket has come to Windows. Starting
this build, two Win32 processes can use the AF_UNIX address family
over Winsock API to communicate with each other.
[1] https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220802075200.907360-3-bmeng.cn@gmail.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The last user of this function has just been removed, so we can
drop this function now, too.
Message-Id: <20220810125720.3849835-4-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 06680b15b4 moved qemu_*_exec_dir() to cutils but forgot
to move the macOS dyld(3) include, resulting in the following
error (when building with Homebrew GCC on macOS Monterey 12.4):
[313/1197] Compiling C object libqemuutil.a.p/util_cutils.c.o
FAILED: libqemuutil.a.p/util_cutils.c.o
../../util/cutils.c:1039:13: error: implicit declaration of function '_NSGetExecutablePath' [-Werror=implicit-function-declaration]
1039 | if (_NSGetExecutablePath(fpath, &len) == 0) {
| ^~~~~~~~~~~~~~~~~~~~
../../util/cutils.c:1039:13: error: nested extern declaration of '_NSGetExecutablePath' [-Werror=nested-externs]
Fix by moving the include line to cutils.
Fixes: 06680b15b4 ("include: move qemu_*_exec_dir() to cutils")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220809222046.30812-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
close() is a *nix function. It works on any file descriptor, and
sockets in *nix are an example of a file descriptor.
closesocket() is a Windows-specific function, which works only
specifically with sockets. Sockets on Windows do not use *nix-style
file descriptors, and socket() returns a handle to a kernel object
instead, so it must be closed with closesocket().
In QEMU there is already a logic to handle such platform difference
in os-posix.h and os-win32.h, that:
* closesocket maps to close on POSIX
* closesocket maps to a wrapper that calls the real closesocket()
on Windows
Replace the call to close a socket with closesocket() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A recent commit moved some Haiku-specific code parts from oslib-posix.c
to cutils.c, but failed to move the corresponding header #include
statement, too, so "make vm-build-haiku.x86_64" is currently broken.
Fix it by moving the header #include, too.
Fixes: 06680b15b4 ("include: move qemu_*_exec_dir() to cutils")
Message-Id: <20220718172026.139004-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before this change, the directory of the executable was being added to
resolve modules in the build tree. However, get_relocated_path() can now
resolve them with the new bundle mechanism.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-5-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Developers often run QEMU without installing. The bundle mechanism
allows to look up files which should be present in installation even in
such a situation.
It is a general mechanism and can find any files in the installation
tree. The build tree will have a new directory, qemu-bundle, to
represent what files the installation tree would have for reference by
the executables.
Note that it abandons compatibility with Windows older than 8. The
extended support for the prior version, 7 ended more than 2 years ago,
and it is unlikely that someone would like to run the latest QEMU on
such an old system.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220624145039.49929-3-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new API, to make a time limited call of the coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
It always returns IOVA_OK so nobody uses it.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220427154931.3166388-1-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It seems that aio_wait_kick always required a memory barrier
or atomic operation in the caller, but nobody actually
took care of doing it.
Let's put the barrier in the function instead, and pair it
with another one in AIO_WAIT_WHILE. Read aio_wait_kick()
comment for further explanation.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220524173054.12651-1-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much logic to simply check that bitmaps are of the same
size. Let's just define that hbitmap_merge() and
bdrv_dirty_bitmap_merge_internal() require their argument bitmaps be of
same size, this simplifies things.
Let's look through the callers:
For backup_init_bcs_bitmap() we already assert that merge can't fail.
In bdrv_reclaim_dirty_bitmap_locked() we gracefully handle the error
that can't happen: successor always has same size as its parent, drop
this logic.
In bdrv_merge_dirty_bitmap() we already has assertion and separate
check. Make the check explicit and improve error message.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220517111206.23585-4-v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On linux, the AT_HWCAP bit PPC_FEATURE_ICACHE_SNOOP indicates
that we can use a simplified 3 instruction flush sequence.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220519141131.29839-1-npiggin@gmail.com>
[rth: update after merging cacheflush.c and cacheinfo.c]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621014837.189139-4-richard.henderson@linaro.org>
Merge init_ctr_el0 into arch_cache_info. In flush_idcache_range,
use the pre-computed line sizes from the global variables.
Use CONFIG_DARWIN in preference to __APPLE__.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621014837.189139-3-richard.henderson@linaro.org>
Combine the two files into cacheflush.c. There's a couple of bits
that would be helpful to share between the two, and combining them
seems better than exporting the bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621014837.189139-2-richard.henderson@linaro.org>
This decreases qemu_clock_deadline_ns_all's share from 23.2% to 13% in a
profile of icount-enabled aarch64-softmmu.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220114004358.299534-2-idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Based on already existing QEMU implementation created a signed
256 bit by 128 bit division needed to implement the vector divide
extended signed quadword instruction from PowerISA 3.1
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-6-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on already existing QEMU implementation, created an unsigned 256
bit by 128 bit division needed to implement the vector divide extended
unsigned instruction from PowerISA3.1
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-5-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Extract the knowledge of IEC and SI prefixes out of size_to_str and
freq_to_str, so that it can be reused when printing statistics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU execution should be suspended when new BH is scheduled.
This is needed to avoid guest timeouts caused by the long cycles
of the execution. In replay mode execution may hang when
vCPU sleeps and block event comes to the queue.
This patch adds notification which wakes up vCPU or interrupts
execution of guest code.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
--
v2: changed first_cpu to current_cpu (suggested by Richard Henderson)
v4: moved vCPU notification to aio_bh_enqueue (suggested by Paolo Bonzini)
Message-Id: <165364837317.688121.17680519919871405281.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHGetFolderPath() is a deprecated API:
https://docs.microsoft.com/en-us/windows/win32/api/shlobj_core/nf-shlobj_core-shgetfolderpatha
It is a wrapper for SHGetKnownFolderPath() and CSIDL_COMMON_PATH is
mapped to FOLDERID_ProgramData:
https://docs.microsoft.com/en-us/windows/win32/shell/csidl
g_get_system_data_dirs() is a suitable replacement, as it will have
FOLDERID_ProgramData in the returned list. However, it follows the XDG
Base Directory Specification, if `XDG_DATA_DIRS` is defined, it will be
returned instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220525144140.591926-3-marcandre.lureau@redhat.com>
The function is required by get_relocated_path() (already in cutils),
and used by qemu-ga and may be generally useful.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-2-marcandre.lureau@redhat.com>
Just setting the max threads to 0 is enough to stop all workers.
Message-Id: <20220514065012.1149539-4-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit f9fc8932b1 ("thread-posix: remove the posix semaphore
support", 2022-04-06) QemuSemaphore has its own mutex and condition
variable; this adds unnecessary overhead on I/O with small block sizes.
Check the QTAILQ directly instead of adding the indirection of a
semaphore's count. Using a semaphore has not been necessary since
qemu_cond_timedwait was introduced; the new code has to be careful about
spurious wakeups but it is simpler, for example thread_pool_cancel does
not have to worry about synchronizing the semaphore count with the number
of elements of pool->request_list.
Note that the return value of qemu_cond_timedwait (0 for timeout, 1 for
signal or spurious wakeup) is different from that of qemu_sem_timedwait
(-1 for timeout, 0 for success).
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <20220514065012.1149539-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The completion bottom half was scheduled within the pool->lock
critical section. That actually results in worse performance,
because the worker thread can run its own small critical section
and go to sleep before the bottom half starts running.
Note that this simple change does not produce an improvement without
changing the thread pool QemuSemaphore to a condition variable.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <20220514065012.1149539-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_co_queue_restart_all is basically the same as qemu_co_enter_all
but without a QemuLockable argument. That's perfectly fine, but only as
long as the function is marked coroutine_fn. If used outside coroutine
context, qemu_co_queue_wait will attempt to take the lock and that
is just broken: if you are calling qemu_co_queue_restart_all outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker to qemu_co_queue_restart_all and to its sole
non-coroutine_fn caller; it then reimplements the function in terms of
qemu_co_enter_all_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because qemu_co_queue_restart_all does not release the lock, it should
be used only in coroutine context. Introduce a new function that,
like qemu_co_enter_next, does release the lock, and use it whenever
qemu_co_queue_restart_all was used outside coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_co_queue_next is basically the same as qemu_co_enter_next but
without a QemuLockable argument. That's perfectly fine, but only
as long as the function is marked coroutine_fn. If used outside
coroutine context, qemu_co_queue_wait will attempt to take the lock
and that is just broken: if you are calling qemu_co_queue_next outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker and reimplements qemu_co_queue_next in terms of
qemu_co_enter_next_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4c41c69e changed the way the coroutine pool is sized because for
virtio-blk devices with a large queue size and heavy I/O, it was just
too small and caused coroutines to be deleted and reallocated soon
afterwards. The change made the size dynamic based on the number of
queues and the queue size of virtio-blk devices.
There are two important numbers here: Slightly simplified, when a
coroutine terminates, it is generally stored in the global release pool
up to a certain pool size, and if the pool is full, it is freed.
Conversely, when allocating a new coroutine, the coroutines in the
release pool are reused if the pool already has reached a certain
minimum size (the batch size), otherwise we allocate new coroutines.
The problem after commit 4c41c69e is that it not only increases the
maximum pool size (which is the intended effect), but also the batch
size for reusing coroutines (which is a bug). It means that in cases
with many devices and/or a large queue size (which defaults to the
number of vcpus for virtio-blk-pci), many thousand coroutines could be
sitting in the release pool without being reused.
This is not only a waste of memory and allocations, but it actually
makes the QEMU process likely to hit the vm.max_map_count limit on Linux
because each coroutine requires two mappings (its stack and the guard
page for the stack), causing it to abort() in qemu_alloc_stack() because
when the limit is hit, mprotect() starts to fail with ENOMEM.
In order to fix the problem, change the batch size back to 64 to avoid
uselessly accumulating coroutines in the release pool, but keep the
dynamic maximum pool size so that coroutines aren't freed too early
in heavy I/O scenarios.
Note that this fix doesn't strictly make it impossible to hit the limit,
but this would only happen if most of the coroutines are actually in use
at the same time, not just sitting in a pool. This is the same behaviour
as we already had before commit 4c41c69e. Fully preventing this would
require allowing qemu_coroutine_create() to return an error, but it
doesn't seem to be a scenario that people hit in practice.
Cc: qemu-stable@nongnu.org
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2079938
Fixes: 4c41c69e05
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-3-kwolf@redhat.com>
Tested-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's true that these functions currently affect the batch size in which
coroutines are reused (i.e. moved from the global release pool to the
allocation pool of a specific thread), but this is a bug and will be
fixed in a separate patch.
In fact, the comment in the header file already just promises that it
influences the pool size, so reflect this in the name of the functions.
As a nice side effect, the shorter function name makes some line
wrapping unnecessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'event-loop-base' provides basic property handling for all 'AioContext'
based event loops. So let's define a new 'MainLoopClass' that inherits
from it. This will permit tweaking the main loop's properties through
qapi as well as through the command line using the '-object' keyword[1].
Only one instance of 'MainLoopClass' might be created at any time.
'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to
mark 'MainLoop' as non-deletable.
[1] For example:
-object main-loop,id=main-loop,aio-max-batch=<value>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-3-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Thread-Local Storage variables cannot be used directly from coroutine
code because the compiler may optimize TLS variable accesses across
qemu_coroutine_yield() calls. When the coroutine is re-entered from
another thread the TLS variables from the old thread must no longer be
used.
Use QEMU_DEFINE_STATIC_CO_TLS() for the current and leader variables.
I think coroutine-win32.c could get away with __thread because the
variables are only used in situations where either the stale value is
correct (current) or outside coroutine context (loading leader when
current is NULL). Due to the difficulty of being sure that this is
really safe in all scenarios it seems worth converting it anyway.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220307153853.602859-4-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thread-Local Storage variables cannot be used directly from coroutine
code because the compiler may optimize TLS variable accesses across
qemu_coroutine_yield() calls. When the coroutine is re-entered from
another thread the TLS variables from the old thread must no longer be
used.
Use QEMU_DEFINE_STATIC_CO_TLS() for the current and leader variables.
The alloc_pool QSLIST needs a typedef so the return value of
get_ptr_alloc_pool() can be stored in a local variable.
One example of why this code is necessary: a coroutine that yields
before calling qemu_coroutine_create() to create another coroutine is
affected by the TLS issue.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220307153853.602859-3-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thread-Local Storage variables cannot be used directly from coroutine
code because the compiler may optimize TLS variable accesses across
qemu_coroutine_yield() calls. When the coroutine is re-entered from
another thread the TLS variables from the old thread must no longer be
used.
Use QEMU_DEFINE_STATIC_CO_TLS() for the current and leader variables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220307153853.602859-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GLib g_unix_open_pipe() is essentially like qemu_pipe(), available since
2.30.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
API available since glib 2.30. It also preserves errno.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'g_get_real_time' returns the number of microseconds since January
1, 1970 UTC, but 'g_date_time_new_from_unix_utc' needs the number of
seconds, so it will cause the invalid time input:
(process:279642): GLib-CRITICAL (recursed) **: g_date_time_format: assertion 'datetime != NULL' failed
Call function 'g_date_time_new_now_utc' instead, it has the same result
as 'g_date_time_new_from_unix_utc(g_get_real_time() / G_USEC_PER_SEC)';
Fixes: 73dab893b5 ("error-report: replace deprecated g_get_current_time() with glib >= 2.62")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220424105036.291370-1-haiyue.wang@intel.com>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
qemu_open_old(O_CREATE) should be replaced with qemu_create() which
handles Error reporting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-38-marcandre.lureau@redhat.com>
Mostly for correctness.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-37-marcandre.lureau@redhat.com>
Use qemu_write_full() instead of open-coding a write loop.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-36-marcandre.lureau@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
Since it depends on monitor code, and error_vprintf_unless_qmp() is
already there.
This will help to move error-report in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-31-marcandre.lureau@redhat.com>
Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>
Move QEMU-specific code to util/osdep.c, so cutils can become a common
subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-22-marcandre.lureau@redhat.com>
The implementation depends on the OS. (and longer-term goal is to move
cutils to a common subproject)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-21-marcandre.lureau@redhat.com>
Add a new log flag, tid, to turn this feature on.
Require the log filename to be set, and to contain %d.
Do not allow tid to be turned off once it is on, nor let
the filename be change thereafter. This avoids the need
for signalling each thread to re-open on a name change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-40-richard.henderson@linaro.org>
Use FILE* for global_file. We can perform an rcu_read on that
just as easily as RCUCloseFILE*. This simplifies a couple of
places, where previously we required taking the rcu_read_lock
simply to avoid racing to dereference RCUCloseFile->fd.
Only allocate the RCUCloseFile prior to call_rcu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-39-richard.henderson@linaro.org>
s/QemuLogFile/RCUCloseFILE/
s/qemu_logfile_free/rcu_close_file/
Emphasize that this is only a carrier for passing a pointer
to call_rcu for closing, and not the real logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-38-richard.henderson@linaro.org>
Merge the close from the changed_name block with the close
from the !need_to_open_file block.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-37-richard.henderson@linaro.org>
Only call is_daemonized once.
We require the result on all paths after this point.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-36-richard.henderson@linaro.org>
Rename to emphasize this covers the file-scope global variables.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-35-richard.henderson@linaro.org>
Rename to emphasize this is the file-scope global variable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-34-richard.henderson@linaro.org>
Rename to emphasize this is the file-scope global variable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-33-richard.henderson@linaro.org>
The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort. We do not
really need to close the FILE before the abort.
The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>
Provide a function to set both filename and flags at
the same time. This is the common case at startup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-28-richard.henderson@linaro.org>
Move QemuLogFile, qemu_logfile, and all inline functions into qemu/log.c.
No need to expose these implementation details in the api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-26-richard.henderson@linaro.org>
Now that the log buffer is flushed after every qemu_log_unlock,
which includes every call to qemu_log, we do not need to force
line buffering (or unbuffering for windows). Block buffer the
entire loggable unit.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-21-richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
The only user of this feature, tcg_dump_ops, has been
converted to use fprintf directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-18-richard.henderson@linaro.org>
Avoid using QemuLogFile and RCU directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-17-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-7-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
Per the recommendations in qapi/error.h, return false on failure.
Use the return value in the monitor, the only place we aren't
already passing error_fatal or error_abort.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-4-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
In this case there is no need to call pthread_cond_timedwait; the
function is just a trywait and waiting on the condition variable would
always time out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that QemuSemaphore is implemented through pthread_cond_t only, we can use
QemuCond and QemuMutex to make the code smaller. Features such as mutex
tracing and CLOCK_MONOTONIC timedwait are supported in qemu-sem naturally.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20220222090507.2028-4-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use CLOCK_MONOTONIC, so the timeout isn't affected by changes to
the system time. It depends on the pthread_condattr_setclock(),
while some systems(e.g. mac os) does not support it, so the behavior
won't change in these systems.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20220222090507.2028-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POSIX specifies an absolute time for sem_timedwait(), it would be
affected if the system time is changing, but there is not a relative
time or monotonic clock version of sem_timedwait, so we cannot gain
from POSIX semaphore any more.
An alternative way is to use sem_trywait + usleep, maybe we can
remove CONFIG_SEM_TIMEDWAIT in this way? No, because some systems
(e.g. mac os) mark the sem_xxx API as deprecated.
So maybe remove the usage of POSIX semaphore and turn to use the
pthread variant for all systems looks better.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20220222090507.2028-2-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only implemented for POSIX anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-30-marcandre.lureau@redhat.com>
[Add braces around if statements. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with other calls in the function, let's use
error_printf(). (it will use stderr since !monitor_cur())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Hajnoczi
Bin Meng
Marc-André Lureau
Paolo Bonzini
Guoyi Tu
Matthew Rosato
Eugenio Pérez
Thomas Huth
Philippe Mathieu-Daudé
Akihiko Odaki
Richard Henderson
Vladimir Sementsov-Ogievskiy
Emanuele Giuseppe Esposito
Nicholas Piggin
Idan Horowitz
Lucas Mateus Castro (alqotel)
Pavel Dovgalyuk
Kevin Wolf
Nicolas Saenz Julienne
Haiyue Wang
Daniel P. Berrangé
Longpeng(Mike)