If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(),
the followed up device_add virtio-net-pci,netdev=net0 will fail
too, prints:
TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD
ioctl() failed: Bad file descriptor
The reason is that the fd of tap is closed when error occured after
calling net_init_tap_one().
The fd should be closed when calling net_init_tap_one failed:
- if tap_set_sndbuf() failed
- if tap_set_sndbuf() succeeded but vhost failed to open or
initialize with vhostforce flag on
- with wrong vhost command line parameter
The fd should not be closed just because vhost failed to open or
initialize but without vhostforce flag. So the followed up
device_add can fall back to userspace virtio successfully.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The function is only used within net.c, so there's no need that
this is a global function.
While we're at it, also remove the unused prototype compute_mcast_idx()
(the function has been removed in commit d9caeb09b1).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Other options like "-chardev" or "-device" feature a nice help text
with the available devices when being called with "help" or "?".
Since it is quite useful, especially if you want to see which network
backends have been compiled into the QEMU binary, let's provide such
a help text for "-netdev", too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It looks strange that net_init_client() and net_init_netdev() both
take an "Error **errp" parameter, but then do the error reporting
with "error_report_err(local_err)" on their own. Let's move the
error reporting to the calling site instead to simplify this code
a little bit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
g_free() was moved from vhost_net_cleanup in commit e6bcb1b, so we should
free net after vhost_net_cleanup
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Connection to the real host CAN bus network through
SocketCAN network interface is available only for Linux
host system. Mechanism is generic, support for another
CAN API and operating systems can be implemented in future.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CanBusState state structure is created for each
emulated CAN channel. Individual clients/emulated
CAN interfaces or host interface connection registers
to the bus by CanBusClientState structure.
The CAN core is prepared to support connection to the
real host CAN bus network. The commit with such support
for Linux SocketCAN follows.
Implementation is as simple as possible. There is no state to be
migrated, and messages prioritization and queuing are not considered
for now. But it is intended to be extended when need arises.
Development repository and more documentation at
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
It does not make much sense to limit these commands to the legacy 'vlan'
concept only, they should work with the modern netdevs, too. So now
it is possible to use this command with one, two or three parameters.
With one parameter, the command installs a hostfwd rule on the default
"user" network:
hostfwd_add tcp:...
With two parameters, the command installs a hostfwd rule on a netdev
(that's the new way of using this command):
hostfwd_add netdev_id tcp:...
With three parameters, the command installs a rule on a 'vlan' (aka hub):
hostfwd_add hub_id name tcp:...
Same applies to the hostfwd_remove command now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Packet size some time different or when network is busy.
Based on same payload size, but TCP protocol can not
guarantee send the same one packet in the same way,
like that:
We send this payload:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
primary:
ppkt1:
----------------
| header |1|2|3|
----------------
ppkt2:
------------------------
| header |4|5|6|7|8|9|0|
------------------------
secondary:
spkt1:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
In the original method, ppkt1 and ppkt2 are different in size and
spkt1, so they can't compare and trigger the checkpoint.
I have tested FTP get 200M and 1G file many times, I found that
the performance was less than 1% of the native.
Now I reconstructed the comparison of TCP packets based on the
TCP sequence number. first of all, ppkt1 and spkt1 have the same
starting sequence number, so they can compare, even though their
length is different. And then ppkt1 with a smaller payload length
is used as the comparison length, if the payload is same, send
out the ppkt1 and record the offset(the length of ppkt1 payload)
in spkt1. The next comparison, ppkt2 and spkt1 can be compared
from the recorded position of spkt1.
like that:
----------------
| header |1|2|3| ppkt1
---------|-----|
| |
---------v-----v--------------
| header |1|2|3|4|5|6|7|8|9|0| spkt1
---------------|\------------|
| \offset |
---------v-------------v
| header |4|5|6|7|8|9|0| ppkt2
------------------------
In this way, the performance can reach native 20% in my multiple
tests.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Tested-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Modified the function colo_packet_compare_common to prepare for the
tcp packet comparison in the next patch.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It has never been documented, so hardly anybody knows about this
parameter, and it is marked as deprecated since QEMU v2.6.
Time to let it go now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that all of the callers have been converted to compute the multicast index
inline using new net CRC functions, this function can now be dropped.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This provides a standard ethernet CRC32 little-endian implementation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Separate out the standard ethernet CRC32 calculation into a new net_crc32()
function, renaming the constant POLYNOMIAL to POLYNOMIAL_BE to make it clear
that this is a big-endian CRC32 calculation.
As part of the constant rename, remove the duplicate definition of POLYNOMIAL
from eepro100.c and use the new POLYNOMIAL_BE constant instead.
Once this is complete remove the existing CRC32 implementation from
compute_mcast_idx() and call the new net_crc32() function in its place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 8ec1440202
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This fixes coverity issue CID1005339.
Make sure that saddr is not used uninitialized if the
mcast parameter is NULL.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Consolidate the code that extract the ip address(src,dst) and
port number(src,dst) of the packet into a separate routine
extract_ip_and_port() since the same chunk of code is called
from two place.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A package from pri_indev or sec_indev only belongs to a particular
Connection, so we only need to compare the package in the specified
Connection's primary_list and secondary_list, rather than for each
the whole Connection list to compare. This is time-consuming and
unnecessary.
Less checkpoint more efficiency.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, a packet from pri_dev or sec_dev is fristly pushed at the
tail of the primary or secondary packet queue then sorted by the tcp
sequence number.
Now, this patch use g_queue_insert_sorted to insert the packet directly
into the suitable position to avoid ordering all packets each time when
a new packet is comming, thereby increasing efficiency.
In addition, consolidate the code that add a packet to the list of
Connection (primary or secondary) into a separate routine colo_insert_packet()
since the same chunk of code is called from two place.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit 0f8c289ad "net: fix -netdev socket,fd= for UDP sockets"
we allow more than one parameter for -netdev socket. But now
we run into an assert when no parameter at all is specified
> qemu-system-x86_64 -netdev socket
socket.c:729: net_init_socket: Assertion `sock->has_udp' failed.
Fix this by reverting the change of the if condition done in 0f8c289ad.
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: 0f8c289ad5
Reported-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When using filter-mirror like the example below where the interface
'ndev0' does not exist on the host, QEMU crashes into segmentation
fault.
$ qemu-system-x86_64 -S -machine pc -netdev user,id=ndev0 -object filter-mirror,id=test-object,netdev=ndev0
This happens because the function filter_mirror_setup() does not check
if the device actually exists and still keep on processing calling
qemu_chr_find(). This patch fixes this issue.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
e.g.
./x86_64-softmmu/qemu-system-x86_64 -nographic -netdev 'user,id=vnet,hostfwd=:555.0.0.0:0-:22'
qemu-system-x86_64: -netdev user,id=vnet,hostfwd=:555.0.0.0:0-:22: Invalid host forwarding rule ':555.0.0.0:0-:22' (Bad host address)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the task which check old packet in the comparing thread,
then use IOthread context timer to handle it.
Process pactkets in the IOThread which arrived over the socket.
we use iothread_get_g_main_context to create a new g_main_loop in
the IOThread.then the packets from the primary and the secondary
are processed in the IOThread.
Finally remove the colo-compare thread using the IOThread instead.
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The packet_enqueue() use g_queue_push_tail() to
enqueue net packet, so it is more efficent way use
g_queue_pop_head() to get packet for compare.
That will improve the success rate of comparison.
In my test the performance of ftp put 1000M file
will increase 10%
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network is busy, some tcp options(like sack) will unpredictable
occur in primary side or secondary side. it will make packet size
not same, but the two packet's payload is identical. colo just
care about packet payload, so we skip the option field.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When -net socket fails, it first reports a specific error, then
a generic one, like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is required
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: Device 'socket' could not be initialized
Convert net_socket_*_init() to Error to get rid of the superfluous second
error message. After the patch, the effect like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is requireda
This also fixes a few silent failures to report an error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, net_socket_mcast_create(), net_socket_fd_init_dgram() and
net_socket_fd_init() use the function such as fprintf(), perror() to
report an error message.
Now, convert these functions to Error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In net_socket_fd_init(), the 'default' case is odd: it warns,
then continues as if the socket type was SOCK_STREAM. The
comment explains "this could be a eg. a pty", but that makes
no sense. If @fd really was a pty, getsockopt() would fail
with ENOTSOCK. If @fd was a socket, but neither SOCK_DGRAM nor
SOCK_STREAM. It should not be treated as if it was SOCK_STREAM.
Turn this case into an Error. If there is a genuine reason to
support something like SOCK_RAW, it should be explicitly
handled.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Cc: armbru@redhat.com
Cc: eblake@redhat.com
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because vnet_hdr have a offset to net packet, we must add it when use
virtio-net.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
This patch fixes -netdev socket,fd= for UDP sockets
Currently -netdev socket,fd=<...> results in
qemu: error: specified mcastaddr "127.0.0.1" (0x7f000001) does not
contain a multicast address
qemu-system-x86_64: -netdev
socket,id=n1,fd=3: Device 'socket' could not be initialized
To fix these we need to allow specifying multicast and fd arguments
for the same netdev. With this the user can specify "-netdev
fd=3,mcast=<IP:port>"
Cc: Jason Wang <jasowang@redhat.com>
Fixes: 3d830459b1
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With "-netdev user,id=net0,dns=1.2.3.4"
error was:
qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: Device 'user' could not be initialized
Error is now:
qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: DNS doesn't belong to network
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
"nc" is freed after hotplug vhost-user, but the watcher is not removed.
The QEMU crash when the watcher access the "nc" when socket disconnects.
Program received signal SIGSEGV, Segmentation fault.
#0 object_get_class (obj=obj@entry=0x2) at qom/object.c:750
#1 0x00007f9bb4180da1 in qemu_chr_fe_disconnect (be=<optimized out>) at chardev/char-fe.c:372
#2 0x00007f9bb40d1100 in net_vhost_user_watch (chan=<optimized out>, cond=<optimized out>, opaque=<optimized out>) at net/vhost-user.c:188
#3 0x00007f9baf97f99a in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#4 0x00007f9bb41d7ebc in glib_pollfds_poll () at util/main-loop.c:213
#5 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
#6 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:515
#7 0x00007f9bb3e266a7 in main_loop () at vl.c:1917
#8 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4786
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so
the following trace event will not fire when solely enabled by SystemTap
or LTTng UST:
if (trace_event_get_state(TRACE_MY_EVENT)) {
str = g_strdup_printf("Expensive string to generate ...",
...);
trace_my_event(str);
g_free(str);
}
Add trace_event_get_state_backends() to fetch backend dstate. Those
backends that use QEMU dstate fetch it as part of
generate_h_backend_dstate().
Update existing trace_event_get_state() callers to use
trace_event_get_state_backends() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
So we have sizeof(struct in6_address) != sizeof(uintptr_t)
and Clang > Coverity on this, see 4555ca6816 :)
net/eth.c:426:30: warning: The code calls sizeof() on a pointer type. This can produce an unexpected result
return bytes_read == sizeof(dst_addr);
^ ~~~~~~~~~~
net/eth.c:475:34: warning: The code calls sizeof() on a pointer type. This can produce an unexpected result
return bytes_read == sizeof(src_addr);
^ ~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We add the vnet_hdr_support option for filter-rewriter, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-rewriter,id=rew0,netdev=hn0,queue=all,vnet_hdr_support
We get the vnet_hdr_len from NetClientState that make us
parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
COLO-Proxy just focus on packet payload, so we skip vnet header.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make colo-compare and filter-rewriter can parse vnet packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for colo-compare, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support
COLO-compare can get vnet header length from filter,
Add vnet_hdr_len to struct packet and output packet with
the vnet_hdr_len.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch change the compare_chr_send() parameter from CharBackend to CompareState,
we can get more information like vnet_hdr(We use it to support packet with vnet_header).
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can use this property flush and send packet with vnet_hdr_len.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-redirector, default is disabled.
If you use virtio-net-pci net driver or other driver needs vnet_hdr, please enable it.
Because colo-compare or other modules needs the vnet_hdr_len to parse
packet, we add this new option send the len to others.
You can use it for example:
-object filter-redirector,id=r0,netdev=hn0,queue=tx,outdev=red0,vnet_hdr_support
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-mirror, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support
If it has vnet_hdr_support flag, we will change the sending packet format from
struct {int size; const uint8_t buf[];} to {int size; int vnet_hdr_len; const uint8_t buf[];}.
make other module(like colo-compare) know how to parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch change the filter_send() parameter from CharBackend to MirrorState,
we can get more information like vnet_hdr(We use it to support packet with vnet_header).
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add a flag to decide whether net_fill_rstate() need read
the vnet_hdr_len or not.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add vnet_hdr_len arguments in NetClientState
that make other module get real vnet_hdr_len easily.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
frontends should avoid accessing CharDriver struct where possible
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the actual unsigned integer type name.
The type name change impacts the following externally visible area:
* vl.c's machine_help_func() puts it in help for -machine NAME,help.
* QMP command qom-list exposes it in ObjectPropertyInfo member @type.
* QMP command device-list-properties exposes it in DevicePropertyInfo
member @type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit 883e4f7624.
This code changed net/socket.c from using socket()+connect(),
to using socket_connect(). In theory this is great, but in
practice this has completely broken the ability to connect
the frontend and backend:
$ ./x86_64-softmmu/qemu-system-x86_64 \
-device e1000,id=e0,netdev=hn0,mac=DE:AD:BE:EF:AF:05 \
-netdev socket,id=hn0,connect=localhost:1234
qemu-system-x86_64: -device e1000,id=e0,netdev=hn0,mac=DE:AD:BE:EF:AF:05: Property 'e1000.netdev' can't find value 'hn0'
The old code would call net_socket_fd_init() synchronously,
while letting the connect() complete in the backgorund. The
new code moved net_socket_fd_init() so that it is only called
after connect() completes in the background.
Thus at the time we initialize the NIC frontend, the backend
does not exist.
The socket_connect() conversion as done is a bad fit for the
current code, since it did not try to change the way it deals
with async connection completion. Rather than try to fix this,
just revert the socket_connect() conversion entirely.
The code is about to be converted to use QIOChannel which
will let the problem be solved in a cleaner manner. This
revert is more suitable for stable branches in the meantime.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because filter_mirror_receive_iov() and filter_redirector_receive_iov()
both use the filter_mirror_send() to send packet, so I change
filter_mirror_send() to filter_send() that looks more common.
And fix some codestyle.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The s->outdev have checked in filter_mirror_set_outdev().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The netdev_add and netdev_del commands should be used nowadays instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because of previous patch's trace arguments over the limit
of UST backend, so I rewrite the patch.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network dumping should be done with "-object filter-dump" nowadays.
Using "-net dump" via the VLAN mechanism is considered as deprecated
and might be removed in a future release. So warn the users now
to inform them to user the filter-dump method instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The files tap-haiku.c and tap-aix.c are identical (except one line
of error message). We should avoid such code duplication, so replace
these by a generic tap-stub.c file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
gcc 7 (on fedora 26) objects to many of the snprintf's
in the smb path and command creation because it can't
figure out that the smb_dir (i.e. the /tmp dir for the configuration)
is known to be short.
Replace all these fixed length buffers by g_str* functions that dynamically
allocate and use g_dir_make_tmp to make the directory.
(It's fairly new glib but we have a compat function for it).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The OS will allocate automatically a free port. This is useful if you
want to be sure to not get any port conflict. You still have to figure
out which port you got, for example with "lsof" (this could be exposed
in the monitor if needed).
Example of use:
$ qemu-system-x86_64 -net user,hostfwd=127.0.0.1:0-:22 ...
Then, get your port with:
$ lsof -np 1474 | grep LISTEN
qemu-syst 31777 bernat 12u IPv4 [...] TCP 127.0.0.1:35145 (LISTEN)
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This reverts commit 0fc8aec7de.
In commit 2dfe5113b1 we split a trace event with a lot of arguments
in two, because the UST trace backend has a limit on the number
of arguments you can have in a single trace event. Unfortunately
we subsequently forgot about this, and in commit 0fc8aec7de
we merged the two trace events again, recreating the "UST backend
doesn't build" bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJY/zFbAAoJEO8Ells5jWIR7LgH/A6lWkODVSKihnibRH82J9oe
rTsDdLgAGAMAur++tmNorPadZyMe/2+Cu0VsiIv591ldILruN6+jJydBzFtWFYE5
JQKa2VSTDu6bHPhr/UpRnWLhGzaJogklJR6YLkonDJznb1UnnTwEZ8c8+XD4gWLo
byo/dYF1yMnpVxSak/FkmCmwxc2K7s7P+r4FWO2CgAgY28F+/qERWJMbl1iUevQP
E1PC/XXEvhMdxi+6oYmWACdbW9/KwC5KKVELsQWYU1DcpQ7rWXCtA/mtKxvX+ePw
7CUK9ldeFXHE8uWVDnh3cWUL65Q8OtZarjMbrnN7xzcQDhMysStvVNS4QckN6/I=
=PEvc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Optimize tcp compare trace event
COLO-compare: Optimize tcp compare for option field
slirp: add a fake NC-SI backend
aspeed: add a FTGMAC100 nic
net/ftgmac100: add a 'aspeed' property
net: add FTGMAC100 support
hw/net: add MII definitions
colo-compare: Fix old packet check bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In this patch we support packet that have tcp options field.
Add tcp options field check, If the packet have options
field we just skip it and compare tcp payload,
Avoid unnecessary checkpoint, optimize performance.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If colo-compare find one old packet,we can notify colo-frame
do checkpoint, no need continue find more old packet here.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because of inet_ntoa() return a statically allocated buffer,
subsequent calls will overwrite, So we fix this bug.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add offset args for colo_packet_compare_common, optimize
colo_packet_compare_icmp() and colo_packet_compare_udp()
just compare the IP payload. Before compare all tcp packet,
we compare tcp checksum firstly, this function can get
better performance.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename colo_packet_compare() to colo_packet_compare_common() that
make tcp_compare udp_compare icmp_compare reuse this function.
Remove minimum packet size check in icmp_compare, because we have
check this in parse_packet_early().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While the offset of packets's sequence for primary side and
secondary side is zero, it is unnecessary to call net_checksum_calculate()
to recalculate the checksume value of packets.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'primary_list' and 'secondary_list' members of struct Connection
is not allocated through dynamically g_queue_new(), but we free it by using
g_queue_free(), which will lead to a double-free bug.
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We use g_queue_init() to init s->conn_list, so we should use g_queue_clear()
to instead of g_queue_free().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will catch the bellow error report while try to delete compare object
by qmp command:
chardev/char-io.c:91: io_watch_poll_finalize: Assertion `iwp->src == ((void *)0)' failed.
This is caused by failing to remove the right fd been watched while
call qemu_chr_fe_set_handlers();
Fix it by pass the worker_context parameter to qemu_chr_fe_set_handlers().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We should call g_main_loop_quit() to notify colo compare thread to
exit, Or it will run in g_main_loop_run() forever.
Besides, the finalizing process can't happen in context of colo thread,
it is reasonable to remove the 'if (qemu_thread_is_self(&s->thread))'
branch.
Before compare thead exits, some cleanup works need to be
done, All unhandled packets need to be released and connection_track_table
needs to be freed, or there will be memory leak.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Instead of using qemu timer to process the stale packets,
We re-use the colo compare thread to process these packets
by creating a new timeout coroutine.
Besides, since we process all the same vNIC's net connection/packets
in one thread, it is safe to remove the timer_check_lock.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make VLAN stripping functions return number of bytes
copied to given Ethernet header buffer.
This information should be used to re-compose
packet IOV after VLAN stripping.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit b0a335e351, a socket write
may trigger a disconnect events, calling vhost_user_stop() and clearing
all the vhost_dev strutures holding data that vhost.c functions expect
to remain valid. Delay the cleanup to keep the vhost_dev structure
valid during the vhost.c functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170227104956.24729-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They're best avoided
in new code.
NetLegacyOptions isn't new, but it's only used internally, not in QMP.
Convert it to a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487709988-14322-3-git-send-email-armbru@redhat.com>
Improve efficiency of TCP packet comparison.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'vlan' parameter is a continuous source of confusion for the users,
many people mix it up with the more common term VLAN (the link layer
packet encapsulation), and even if they realize that the QEMU 'vlan' is
rather some kind of network hub emulation, there is still a high risk
that they configure their QEMU networking in a wrong way with this
parameter (e.g. by hooking NICs together, so they get a 'loopback'
between one and the other NIC).
Thus at one point in time, we should finally get rid of the 'vlan'
feature in QEMU. Let's do a first step in this direction by declaring
the 'vlan' parameter as deprecated and informing the users to use the
'netdev' parameter instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Remove the chardev implicitly when cleaning up the netdev. This
prevents from reusing the chardev since it would be in an incorrect
state with the slave.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1256618
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJYgXzxAAoJEO8Ells5jWIRgtAIAKuFrOBE/xJnjd/45sVKcx2j
fsohKHF8T/eLmt5sw+MhGtnM/oRJRUX8kGpA9AU8m6TCSaTYh2tOKX5lwrykuAzk
feqz2pqZFwiLWs5Ro7qEQIhMkqtFetODvKd05qnKnAldj8SC45czKxdghmSP/B+w
4nnDEdqVqUuUseDCa1mW1b4f6g1N93LbgChK7lK9Xqg+OqeEbQ7nLgVvcWvN7+Ea
DfDKWP8tjQ5QhjzFWc4wa9/Tx+0HI7Dn57fv98XdJMvm1kt/MdnO7QKAXWmHH5s/
6DX+NHgN0ZAn85gv/ufq1F9C4TstbAoZA9EOGhoBJ5ww8mueARB3L2iCj+OcS9A=
=gkbh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on failure in net_init_tap()
hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize
hw/net/dp8393x: Avoid unintentional sign extensions on addresses
m68k: QOMify the MCF Fast Ethernet Controller device
net: optimize checksum computation
docs: Fix description of the sentence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 091a6b2ac fixed most of the memory leaks in failure
paths in net_init_tap() reported by Coverity (CID 1356216),
but missed one. Fix it by deferring the allocation of
fds and vhost_fds until after the error check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Very simple loop optimization with a significant performance impact.
Microbenchmark results, modern x86-64:
buffer size | speed up
------------+---------
1500 | 1.7x
64 | 1.5x
8 | 1.15x
Microbenchmark results, POWER7:
buffer size | speed up
------------+---------
1500 | 5x
64 | 3.3x
8 | 1.13x
There is a lot of room for further improvement at the expense of
code complexity - aligned multibyte reads, LE/BE considerations,
architecture-specific optimizations, etc. This patch still keeps
things simple and readable.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patches implements Device IOTLB support for vhost kernel. This is
done through:
1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
- setting up device IOTLB request callback
- processing device IOTLB request
- processing device IOTLB invalidation
2) kernel support for Device IOTLB API:
- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
triggered through iommu memory region notifier from device IOTLB
invalidation descriptor processing routine.
With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support of recording and replaying network packets in
irount rr mode.
Record and replay for network interactions is performed with the network filter.
Each backend must have its own instance of the replay filter as follows:
-netdev user,id=net1 -device rtl8139,netdev=net1
-object filter-replay,id=replay,netdev=net1
Replay network filter is used to record and replay network packets. While
recording the virtual machine this filter puts all packets coming from
the outer world into the log. In replay mode packets from the log are
injected into the network device. All interactions with network backend
in replay mode are disabled.
v5 changes:
- using iov_to_buf function instead of loop
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The use of -net socket,listen was broken in the following
commit
commit 16a3df403b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Fri May 13 15:35:19 2016 +0800
net/net: Add SocketReadState for reuse codes
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
This refactored the state out of NetSocketState into a
separate SocketReadState. This refactoring requires
that a callback is provided to be triggered upon
completion of a packet receive from the guest.
The patch only registered this callback in the codepaths
hit by -net socket,connect, not -net socket,listen. So
as a result packets sent by the guest in the latter case
get dropped on the floor.
This bug is hidden because net_fill_rstate() silently
does nothing if the callback is not set.
This patch adds in the middle callback registration
and also adds an assert so that QEMU aborts if there
are any other codepaths hit which are missing the
callback.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
SLIRP expects a CharBackend as the third argument to slirp_add_exec,
but net/slirp.c was passing a CharDriverState. Fix this to restore
guestfwd functionality.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix memory leak in colo-compare.c and filter-rewriter.c
Report by Coverity and add some comments.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the queues share the same chardev. Initialize only the first queue
CharBackend, and pass it to other queues. This will allow to claim the
chardev only once in a later change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-18-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This factors out claiming of chardev, and changes the call to
non-fatal to return an error like the rest of the chardev checks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.
commit 30656b097e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:34 2016 +0800
filter-rewriter: rewrite tcp packet to keep secondary connection
commit f4b618360e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:31 2016 +0800
colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit 0682e15b19
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:30 2016 +0800
colo-compare: introduce packet comparison thread
commit 59509ec16b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:27 2016 +0800
net/colo.c: add colo.c to define and handle packet
This moves all events into net/trace-events where they
were supposed to live.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
617 QTAILQ_FOREACH(opt, &opts->head, next) {
[Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
(gdb) bt
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
#1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
#2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
#3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
#4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
#5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
#6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
#7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
#8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
#9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
#10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
#11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
#12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
#13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
#14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
#15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
#16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
#17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
#19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
#20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
#21 0x000055baf676587b in main_loop () at vl.c:1908
#22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
(gdb) p opts
$1 = (QemuOpts *) 0x0
The crash occurred when attaching vhost-user net via QMP:
{
"execute": "chardev-add",
"arguments": {
"id": "charnet2",
"backend": {
"type": "socket",
"data": {
"addr": {
"type": "unix",
"data": {
"path": "/var/run/openvswitch/vhost-user1"
}
},
"wait": false,
"server": false
}
}
},
"id": "libvirt-19"
}
{
"return": {
},
"id": "libvirt-19"
}
{
"execute": "netdev_add",
"arguments": {
"type": "vhost-user",
"chardev": "charnet2",
"id": "hostnet2"
},
"id": "libvirt-20"
}
Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
we only need to allocate enough memory to hold the packet. This might be
less than NET_BUFSIZE. Additionally fail early if the packet is larger
than NET_BUFSIZE.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.
Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.
When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.
primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.
In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We use net/colo.h to track connection and parse packet
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Jhash will be used by colo-compare and filter-rewriter
to save and lookup net connection info
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The net/colo.c is used by colo-compare and filter-rewriter.
this can share common data structure like net packet,
and other functions.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Upon hmp_host_net_remove(), the appropriate -net client is deleted
(according to the given vlan_id and device id), as well as the
corresponsing hub port.
However, the relevant '-net' option that was added by former
hmp_host_net_add() call is still present in "net" options group.
This makes the following legit HMP sequence erroneous:
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
(qemu) host_net_remove 1 n1
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
Duplicate ID 'n1' for net
Fix, by deleting the stored '-net' option associated with the given
device id.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking. This reverts the
commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:
==18447== Invalid write of size 8
==18447== at 0x7EF2B5: notifier_remove (notify.c:32)
==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447== by 0x69445B: qemu_del_net_client (net.c:401)
==18447== by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447== by 0x6A4241: net_init_slirp (slirp.c:865)
==18447== by 0x695C6D: net_client_init1 (net.c:1051)
==18447== by 0x695F6E: net_client_init (net.c:1108)
==18447== by 0x696DBA: net_init_netdev (net.c:1498)
==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447== by 0x696E60: net_init_clients (net.c:1516)
==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The chardev waits for an initial connection before starting qemu, and
vhost-user should wait for the backend negotiation to be completed
before starting qemu too.
vhost-user is started in the net_vhost_user_event callback, which is
synchronously called after the socket is connected. Use a
VhostUserState.started flag to indicate vhost-user init completed
successfully and qemu can be started.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a few assertions to be more explicit about the runtime behaviour
after the previous patch: get_vhost_net() is non-null after
net_vhost_user_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many code paths assume get_vhost_net() returns non-null.
Keep VhostUserState.vhost_net after a successful vhost_net_init(),
instead of freeing it in vhost_net_cleanup().
VhostUserState.vhost_net is thus freed before after being recreated or
on final vhost_user_cleanup() and there is no need to save the acked
features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some cases, qemu_chr_fe_read_all() on HUP event doesn't raise
CHR_EVENT_CLOSED because the read/recv function returns -1 on
disconnected peers (for example with tch_chr_recv, an ECONNRESET errno
overwritten as EIO).
It is simpler to explicitely disconnect on HUP, rising CHR_EVENT_CLOSED
if it wasn't disconnected already.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shorten the code and make it more clear by using the specialized
function g_str_has_prefix().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MhfL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into staging
QAPI patches for 2016-07-19
# gpg: Signature made Tue 19 Jul 2016 19:35:27 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-19:
net: Use correct type for bool flag
qapi: Change Netdev into a flat union
block: Simplify drive-mirror
block: Simplify block_set_io_throttle
qapi: Implement boxed types for commands/events
qapi: Plumb in 'boxed' to qapi generator lower levels
qapi-event: Simplify visit of non-implicit data
qapi: Drop useless gen_err_check()
qapi: Add type.is_empty() helper
qapi: Hide tag_name data member of variants
qapi: Special case c_name() for empty type
qapi: Require all branches of flat union enum to be covered
net: use Netdev instead of NetClientOptions in client init
qapi: change QmpInputVisitor to QSLIST
qapi: change QmpOutputVisitor to QSLIST
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
is_netdev is only used as a bool, so make it one.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>
[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all. Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Coverity reports a "suspicious sizeof" which is indeed wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is not dereferencing the pointer, and instead checking only
the value of the pointer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
=sz/L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
cleanup is needed regardless at exit() time for slirp's SMB
functionality. Use an exit notifier to call slirp_smb_cleanup.
If net_cleanup() is called first, then remove the exit notifier as it
will become a dangling pointer otherwise.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
tap cleanup is necessary regarless at exit() time. Use an exit notifier
to call TAP down_script. If net_cleanup() is called first, then remove
the exit notifier as it will become a dangling pointer otherwise.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This otherwise causes a use-after-free if network backend cleanup
is performed before character device cleanup.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. Thetask was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit fefe2a78 accidently dropped the code path for injecting
raw packets. This feature is needed for sending gratuitous ARPs
after an incoming migration has completed. The result is increased
network downtime for vservers where the network card is not virtio-net
with the VIRTIO_NET_F_GUEST_ANNOUNCE feature.
Fixes: fefe2a78ab
Cc: qemu-stable@nongnu.org
Cc: hongyang.yang@easystack.cn
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move all trace-events for files in the net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXY0Q3AAoJECgfDbjSjVRpkVcH/2gTHRE9yUoWe6ROvPV67BKx
8Iy9GzJ3BMO3RolVZEA5KXIevn5TG+pV274BZEuXMD3AL/molv279p0o/gvBYoqq
V0jNH2MO+MV6D9OzhUXcgWSejvybF5W07ojPDU/hlgtFXPZFbJDyt95MWaLiilOg
cCtTuRqgrrRaypcnnk/CIDbC+Ek2kAYdgQHQbfj9ihle3TWO8R0bSXnFqSaqCIkM
4slMlv8y82fODeiO83nkpfAP1NCnfnRC8r8Gv7hbEUTlZQntavx5DuYdiIx6nsJE
W0g+Gpe1o0+jRuMnucGIUZvqzZ0e/I0wZuV16Nsfx+Rbd5+4CzTxZda5Qb05v7I=
=BHbJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 17 Jun 2016 01:28:39 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
MAINTAINERS: add Marcel to PCI
msi_init: change return value to 0 on success
fix some coding style problems
pci core: assert ENOSPC when add capability
test: start vhost-user reconnect test
tests: append i386 tests
vhost-net: save & restore vring enable state
vhost-net: save & restore vhost-user acked features
vhost-net: do not crash if backend is not present
vhost-user: disconnect on start failure
qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd
tests/vhost-user-bridge: workaround stale vring base
tests/vhost-user-bridge: add client mode
vhost-user: add ability to know vhost-user backend disconnection
pci: fix pci_requester_id()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
tests/Makefile.include
The initial vhost-user connection sets the features to be negotiated
with the driver. Renegotiation isn't possible without device reset.
To handle reconnection of vhost-user backend, ensure the same set of
features are provided, and reuse already acked features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the backend failed to start (for example feature negociation failed),
do not exit, but disconnect the char device instead. Slightly more
robust for reconnect case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current QEMU cannot detect vhost-user backend disconnection. The
patch adds ability to know it.
To know disconnection, add watcher to detect G_IO_HUP event. When
G_IO_HUP event is detected, the disconnected socket will be read
to cause a CHR_EVENT_CLOSED.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* based on Eth, UDP, TCP struct present in eth.h instead of hardcoded
indexes and sizes.
* based on various macros present in eth.h.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.
Changes are:
1. Support iovec lists for RX buffers
2. Deeper RX packets parsing
3. Loopback option for TX packets
4. Extended VLAN headers handling
5. RSS processing for RX packets
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
v4:
- move 'rs->finalize = finalize' to rs_init()
v3:
- remove SocketReadState init callback
- put finalize callback to net_fill_rstate()
v2:
- rename ReadState to SocketReadState
- add SocketReadState init and finalize callback
v1:
- init patch
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_init_tap has a huge stack usage of 8192 bytes approx.
Moving large arrays to heap to reduce stack usage.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
After commit 338d3f, we support 'status' property for filter object.
The segfault can be triggered by starting qemu with 'status=off' property
for filter, when the s->incoming_queue is NULL, we reference it directly
in qemu_net_queue_flush() which was called in status_changed() callback
function.
We shouldn't trigger status_changed() before the filter was initialized,
We can check the value of 'nf->netdev' to confirm if the filter is
initialized or not, so let's check its value before calling
status_changed().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code")
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
nc_sendv_compat has a huge stack usage of 69680 bytes approx.
Moving large arrays to heap to reduce stack usage.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
qemu_hexdump() in util/hexdump.c has been changed to give also include a
ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have
been replaced with calls to qemu_hexdump(). This takes care of two misc
BiteSized Tasks.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The netmap.c file fails to build on FreeBSD with
net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration]
error_setg_errno(errp, errno, "Failed to nm_open() %s",
^
net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration]
error_propagate(errp, err);
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1459429690-6144-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The options names were fixed in the qapi layer, but not in the command-line
options.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Change filter_mirror_send interface to make it easier
to used by other filter
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
