.. |
allwinner-a10.c
|
hw: Mark device misusing nd_table[] FIXME
|
2015-04-02 15:30:32 +02:00 |
armv7m.c
|
target_arm: Parameterise the irq lines for armv7m_init
|
2015-02-05 13:37:21 +00:00 |
boot.c
|
Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
|
2015-04-26 16:49:24 +01:00 |
collie.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |
cubieboard.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
digic_boards.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
digic.c
|
|
|
exynos4_boards.c
|
|
|
exynos4210.c
|
error: Use error_report_err() where appropriate
|
2015-02-18 10:51:09 +01:00 |
gumstix.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |
highbank.c
|
hw/arm/highbank.c: Wire FIQ between CPU <> GIC
|
2015-05-12 11:57:19 +01:00 |
integratorcp.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
kzm.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
mainstone.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |
Makefile.objs
|
hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM
|
2015-05-29 11:28:54 +01:00 |
musicpal.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
netduino2.c
|
netduino2: Add the Netduino 2 Machine
|
2015-03-11 13:21:06 +00:00 |
nseries.c
|
hw/arm/nseries: convert ffs(3) to ctz32()
|
2015-04-28 15:36:08 +02:00 |
omap1.c
|
Convert ffs() != 0 callers to ctz32()
|
2015-04-28 15:36:08 +02:00 |
omap2.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
omap_sx1.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |
palm.c
|
|
|
pxa2xx_gpio.c
|
Convert (ffs(val) - 1) to ctz32(val)
|
2015-04-28 15:36:08 +02:00 |
pxa2xx_pic.c
|
|
|
pxa2xx.c
|
target-arm: rename c1_coproc to cpacr_el1
|
2015-04-26 16:49:25 +01:00 |
realview.c
|
error: Use error_report_err() where appropriate
|
2015-02-18 10:51:09 +01:00 |
spitz.c
|
sysbus: Make devices picking up backends unavailable with -device
|
2015-04-02 15:30:44 +02:00 |
stellaris.c
|
target_arm: Parameterise the irq lines for armv7m_init
|
2015-02-05 13:37:21 +00:00 |
stm32f205_soc.c
|
stm32f205: Add the stm32f205 SoC
|
2015-03-11 13:21:06 +00:00 |
strongarm.c
|
Convert (ffs(val) - 1) to ctz32(val)
|
2015-04-28 15:36:08 +02:00 |
strongarm.h
|
|
|
tosa.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |
versatilepb.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
vexpress.c
|
hw/arm/vexpress.c: Wire FIQ between CPU <> GIC
|
2015-05-12 11:57:18 +01:00 |
virt-acpi-build.c
|
hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table
|
2015-05-29 11:28:59 +01:00 |
virt.c
|
hw/arm/virt: Enable dynamic generation of ACPI v5.1 tables
|
2015-05-29 11:28:59 +01:00 |
xilinx_zynq.c
|
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
|
2015-04-08 17:30:36 +01:00 |
xlnx-ep108.c
|
arm: xlnx-ep108: Add bootloading
|
2015-05-18 16:41:14 +01:00 |
xlnx-zynqmp.c
|
arm: xlnx-zynqmp: Add UART support
|
2015-05-18 16:41:13 +01:00 |
z2.c
|
hw: Convert from BlockDriverState to BlockBackend, mostly
|
2014-10-20 14:02:25 +02:00 |