Peter Maydell 37dc4b5f7c hw/intc/ppc-uic: Make default dcr-base 0xc0, not 0x30 ... In commit 34d0831f38 the ppc-uic device was added, with a dcr-base property. The intention was that the default value of dcr-base should be the one that most of our boards need, so that in the common case they don't need to specify a property value. All QEMU boards with a UIC use a dcr-base of 0xc0, with the exception of sam460ex which has four UICs and so puts them at 0xc0, 0xd0, 0xe0, 0xf0. So 0xc0 is the obvious right choice for the default dcr-base. The board code conversions in commits 0270d74ef8 (bamboo) and c5ac9dc64f (virtex_ml507) assumed that default was 0xc0. Unfortunately the actual default in 34d0831f38 was 0x30, by mistake, so the bamboo and virtex_ml507 boards were broken as they were converted away from ppcuic_init() (which always specifies the dcr_base property value explicitly). Set the default dcr-base to 0xc0 as was intended, fixing bamboo and virtex_ml507. Fixes: 34d0831f38 Reported-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210111213007.7381-1-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>		2021-01-19 10:20:29 +11:00
..
allwinner-a10-pic.c
apic_common.c	i386: do not use ram_size global	2020-12-10 12:15:08 -05:00
apic.c	Remove superfluous timer_del() calls	2021-01-08 15:13:38 +00:00
arm_gic_common.c
arm_gic_kvm.c
arm_gic.c	intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs	2021-01-08 15:13:37 +00:00
arm_gicv2m.c
arm_gicv3_common.c
arm_gicv3_cpuif.c
arm_gicv3_dist.c
arm_gicv3_its_common.c
arm_gicv3_its_kvm.c
arm_gicv3_kvm.c	hw/intc/arm_gicv3_kvm: silence the compiler warnings	2020-12-18 09:14:23 +01:00
arm_gicv3_redist.c
arm_gicv3.c
armv7m_nvic.c	hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN	2021-01-08 15:13:38 +00:00
aspeed_vic.c
bcm2835_ic.c
bcm2836_control.c
etraxfs_pic.c
exynos4210_combiner.c
exynos4210_gic.c
gic_internal.h
gicv3_internal.h
grlib_irqmp.c	hw/sparc: Make grlib-irqmp device handle its own inbound IRQ lines	2021-01-06 11:41:37 +00:00
heathrow_pic.c
i8259_common.c
i8259.c
ibex_plic.c	intc/ibex_plic: Clear interrupts that occur during claim process	2020-12-17 21:56:43 -08:00
imx_avic.c
imx_gpcv2.c
intc.c
ioapic_common.c
ioapic.c	Remove superfluous timer_del() calls	2021-01-08 15:13:38 +00:00
Kconfig	ppc: Simplify reverse dependencies of POWERNV and PSERIES on XICS and XIVE	2021-01-06 11:09:59 +11:00
lm32_pic.c
loongson_liointc.c	hw/intc: Rework Loongson LIOINTC	2021-01-04 23:24:44 +01:00
meson.build	ppc: Simplify reverse dependencies of POWERNV and PSERIES on XICS and XIVE	2021-01-06 11:09:59 +11:00
mips_gic.c
omap_intc.c
ompic.c
openpic_kvm.c
openpic.c
pl190.c
pnv_xive_regs.h
pnv_xive.c
ppc-uic.c	hw/intc/ppc-uic: Make default dcr-base 0xc0, not 0x30	2021-01-19 10:20:29 +11:00
puv3_intc.c
realview_gic.c
rx_icu.c	hw/intc: fix heap-buffer-overflow in rxicu_realize()	2020-11-23 10:41:58 +00:00
s390_flic_kvm.c	migration: Replace migration's JSON writer by the general one	2020-12-19 10:39:16 +01:00
s390_flic.c
sh_intc.c
sifive_clint.c
sifive_plic.c
slavio_intctl.c
spapr_xive_kvm.c	xive: Add trace events	2020-12-14 15:54:12 +11:00
spapr_xive.c	spapr/xive: Make spapr_xive_pic_print_info() static	2021-01-06 11:09:59 +11:00
trace-events	xive: Add trace events	2020-12-14 15:54:12 +11:00
trace.h
vgic_common.h
xics_kvm.c	spapr/xics: Drop unused argument to xics_kvm_has_broken_disconnect()	2020-12-14 15:50:55 +11:00
xics_pnv.c
xics_spapr.c
xics.c
xilinx_intc.c
xive.c	xive: Add trace events	2020-12-14 15:54:12 +11:00
xlnx-pmu-iomod-intc.c
xlnx-zynqmp-ipi.c